#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/crc32.h>
+#include <linux/bitops.h>
#include <asm/processor.h>
-#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
+#include <asm/irq.h>
/* Board/System/Debug information/definition ---------------- */
static u8 dmfe_sense_speed(struct dmfe_board_info *);
static void dmfe_process_mode(struct dmfe_board_info *);
static void dmfe_timer(unsigned long);
+static inline u32 cal_CRC(unsigned char *, unsigned int, u8);
static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *);
static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *);
static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *);
static void dmfe_dynamic_reset(struct DEVICE *);
static void dmfe_free_rxbuffer(struct dmfe_board_info *);
static void dmfe_init_dm910x(struct DEVICE *);
-static inline u32 cal_CRC(unsigned char *, unsigned int, u8);
static void dmfe_parse_srom(struct dmfe_board_info *);
static void dmfe_program_DM9801(struct dmfe_board_info *, int);
static void dmfe_program_DM9802(struct dmfe_board_info *);
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
err = -ENODEV;
goto err_out_free;
DMFE_DBUG(0, "dmfe_interrupt()", 0);
- if (!dev) {
- DMFE_DBUG(1, "dmfe_interrupt() without DEVICE arg", 0);
- return IRQ_NONE;
- }
-
spin_lock_irqsave(&db->lock, flags);
/* Got DM910X status */
}
+/*
+ * Calculate the CRC valude of the Rx packet
+ * flag = 1 : return the reverse CRC (for the received packet CRC)
+ * 0 : return the normal CRC (for Hash Table index)
+ */
+
+static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag)
+{
+ u32 crc = crc32(~0, Data, Len);
+ if (flag) crc = ~crc;
+ return crc;
+}
+
+
/*
* Receive the come packet and pass to upper layer
*/
/* Received Packet CRC check need or not */
if ( (db->dm910x_chk_mode & 1) &&
- (cal_CRC(skb->tail, rxlen, 1) !=
- (*(u32 *) (skb->tail+rxlen) ))) { /* FIXME (?) */
+ (cal_CRC(skb->data, rxlen, 1) !=
+ (*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */
/* Found a error received packet */
dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
db->dm910x_chk_mode = 3;
/* size less than COPY_SIZE, allocate a rxlen SKB */
skb->dev = dev;
skb_reserve(skb, 2); /* 16byte align */
- memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
+ memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->data, rxlen);
dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
} else {
skb->dev = dev;
if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
rxptr->rx_skb_ptr = skb;
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
break;
rxptr->rx_skb_ptr = skb; /* FIXME (?) */
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
rxptr = rxptr->next_rx_desc;
}
-/*
- * Calculate the CRC valude of the Rx packet
- * flag = 1 : return the reverse CRC (for the received packet CRC)
- * 0 : return the normal CRC (for Hash Table index)
- */
-
-static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag)
-{
- u32 crc = crc32(~0, Data, Len);
- if (flag) crc = ~crc;
- return crc;
-}
-
-
/*
* Parser SROM and media mode
*/
if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) {
/* SROM V4.01 */
/* Get NIC support media mode */
- db->NIC_capability = le16_to_cpup(srom + 34);
+ db->NIC_capability = le16_to_cpup((__le16 *)srom + 34/2);
db->PHY_reg4 = 0;
for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) {
switch( db->NIC_capability & tmp_reg ) {
}
/* Media Mode Force or not check */
- dmfe_mode = le32_to_cpup(srom + 34) & le32_to_cpup(srom + 36);
+ dmfe_mode = le32_to_cpup((__le32 *)srom + 34/4) &
+ le32_to_cpup((__le32 *)srom + 36/4);
switch(dmfe_mode) {
case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */
case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */
{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID },
{ 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID },
- { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl);
MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw");
MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver");
MODULE_LICENSE("GPL");
-
-MODULE_PARM(debug, "i");
-MODULE_PARM(mode, "i");
-MODULE_PARM(cr6set, "i");
-MODULE_PARM(chkmode, "i");
-MODULE_PARM(HPNA_mode, "i");
-MODULE_PARM(HPNA_rx_cmd, "i");
-MODULE_PARM(HPNA_tx_cmd, "i");
-MODULE_PARM(HPNA_NoiseFloor, "i");
-MODULE_PARM(SF_mode, "i");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(debug, int, 0);
+module_param(mode, byte, 0);
+module_param(cr6set, int, 0);
+module_param(chkmode, byte, 0);
+module_param(HPNA_mode, byte, 0);
+module_param(HPNA_rx_cmd, byte, 0);
+module_param(HPNA_tx_cmd, byte, 0);
+module_param(HPNA_NoiseFloor, byte, 0);
+module_param(SF_mode, byte, 0);
MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
MODULE_PARM_DESC(mode, "Davicom DM9xxx: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function (bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
git://git.onelab.eu / linux-2.6.git / blobdiff