MODULE_AUTHOR("The Linux Kernel Team");
MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver");
MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
MODULE_PARM(tulip_debug, "i");
MODULE_PARM(max_interrupt_work, "i");
MODULE_PARM(rx_copybreak, "i");
/* RS7112 */
{ "Conexant LANfinity", 256, 0x0001ebef,
HAS_MII | HAS_ACPI, tulip_timer },
-
- /* ULi526X */
- { "ULi M5261/M5263", 128, 0x0001ebef,
- HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer },
};
{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
- { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
- { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
+ { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, /* ALi 1563 integrated ethernet */
{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
{ } /* terminate list */
};
static void tulip_up(struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
+ long ioaddr = dev->base_addr;
int next_tick = 3*HZ;
int i;
/* On some chip revs we must set the MII/SYM port before the reset!? */
if (tp->mii_cnt || (tp->mtable && tp->mtable->has_mii))
- iowrite32(0x00040000, ioaddr + CSR6);
+ outl(0x00040000, ioaddr + CSR6);
/* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
- iowrite32(0x00000001, ioaddr + CSR0);
+ outl(0x00000001, ioaddr + CSR0);
udelay(100);
/* Deassert reset.
Wait the specified 50 PCI cycles after a reset by initializing
Tx and Rx queues and the address filter list. */
- iowrite32(tp->csr0, ioaddr + CSR0);
+ outl(tp->csr0, ioaddr + CSR0);
udelay(100);
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq);
- iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
- iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
+ outl(tp->rx_ring_dma, ioaddr + CSR3);
+ outl(tp->tx_ring_dma, ioaddr + CSR4);
tp->cur_rx = tp->cur_tx = 0;
tp->dirty_rx = tp->dirty_tx = 0;
u32 addr_low = le32_to_cpu(get_unaligned((u32 *)dev->dev_addr));
u32 addr_high = le16_to_cpu(get_unaligned((u16 *)(dev->dev_addr+4)));
if (tp->chip_id == AX88140) {
- iowrite32(0, ioaddr + CSR13);
- iowrite32(addr_low, ioaddr + CSR14);
- iowrite32(1, ioaddr + CSR13);
- iowrite32(addr_high, ioaddr + CSR14);
+ outl(0, ioaddr + CSR13);
+ outl(addr_low, ioaddr + CSR14);
+ outl(1, ioaddr + CSR13);
+ outl(addr_high, ioaddr + CSR14);
} else if (tp->flags & COMET_MAC_ADDR) {
- iowrite32(addr_low, ioaddr + 0xA4);
- iowrite32(addr_high, ioaddr + 0xA8);
- iowrite32(0, ioaddr + 0xAC);
- iowrite32(0, ioaddr + 0xB0);
+ outl(addr_low, ioaddr + 0xA4);
+ outl(addr_high, ioaddr + 0xA8);
+ outl(0, ioaddr + 0xAC);
+ outl(0, ioaddr + 0xB0);
}
} else {
/* This is set_rx_mode(), but without starting the transmitter. */
if (tp->chip_id == DC21143 &&
(tulip_media_cap[dev->if_port] & MediaIsMII)) {
/* We must reset the media CSRs when we force-select MII mode. */
- iowrite32(0x0000, ioaddr + CSR13);
- iowrite32(0x0000, ioaddr + CSR14);
- iowrite32(0x0008, ioaddr + CSR15);
+ outl(0x0000, ioaddr + CSR13);
+ outl(0x0000, ioaddr + CSR14);
+ outl(0x0008, ioaddr + CSR15);
}
tulip_select_media(dev, 1);
} else if (tp->chip_id == DC21142) {
printk(KERN_INFO "%s: Using MII transceiver %d, status "
"%4.4x.\n",
dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1));
- iowrite32(csr6_mask_defstate, ioaddr + CSR6);
+ outl(csr6_mask_defstate, ioaddr + CSR6);
tp->csr6 = csr6_mask_hdcap;
dev->if_port = 11;
- iowrite32(0x0000, ioaddr + CSR13);
- iowrite32(0x0000, ioaddr + CSR14);
+ outl(0x0000, ioaddr + CSR13);
+ outl(0x0000, ioaddr + CSR14);
} else
t21142_start_nway(dev);
} else if (tp->chip_id == PNIC2) {
/* for initial startup advertise 10/100 Full and Half */
tp->sym_advertise = 0x01E0;
/* enable autonegotiate end interrupt */
- iowrite32(ioread32(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5);
- iowrite32(ioread32(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7);
+ outl(inl(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5);
+ outl(inl(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7);
pnic2_start_nway(dev);
} else if (tp->chip_id == LC82C168 && ! tp->medialock) {
if (tp->mii_cnt) {
dev->if_port = 11;
tp->csr6 = 0x814C0000 | (tp->full_duplex ? 0x0200 : 0);
- iowrite32(0x0001, ioaddr + CSR15);
- } else if (ioread32(ioaddr + CSR5) & TPLnkPass)
+ outl(0x0001, ioaddr + CSR15);
+ } else if (inl(ioaddr + CSR5) & TPLnkPass)
pnic_do_nway(dev);
else {
/* Start with 10mbps to do autonegotiation. */
- iowrite32(0x32, ioaddr + CSR12);
+ outl(0x32, ioaddr + CSR12);
tp->csr6 = 0x00420000;
- iowrite32(0x0001B078, ioaddr + 0xB8);
- iowrite32(0x0201B078, ioaddr + 0xB8);
+ outl(0x0001B078, ioaddr + 0xB8);
+ outl(0x0201B078, ioaddr + 0xB8);
next_tick = 1*HZ;
}
} else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881)
&& ! tp->medialock) {
dev->if_port = 0;
tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0);
- iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
+ outl(0x0f370000 | inw(ioaddr + 0x80), ioaddr + 0x80);
} else if (tp->chip_id == MX98715 || tp->chip_id == MX98725) {
/* Provided by BOLO, Macronix - 12/10/1998. */
dev->if_port = 0;
tp->csr6 = 0x01a80200;
- iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
- iowrite32(0x11000 | ioread16(ioaddr + 0xa0), ioaddr + 0xa0);
+ outl(0x0f370000 | inw(ioaddr + 0x80), ioaddr + 0x80);
+ outl(0x11000 | inw(ioaddr + 0xa0), ioaddr + 0xa0);
} else if (tp->chip_id == COMET || tp->chip_id == CONEXANT) {
/* Enable automatic Tx underrun recovery. */
- iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
+ outl(inl(ioaddr + 0x88) | 1, ioaddr + 0x88);
dev->if_port = tp->mii_cnt ? 11 : 0;
tp->csr6 = 0x00040000;
} else if (tp->chip_id == AX88140) {
tulip_stop_rxtx(tp);
barrier();
udelay(5);
- iowrite32(tp->csr6 | TxOn, ioaddr + CSR6);
+ outl(tp->csr6 | TxOn, ioaddr + CSR6);
/* Enable interrupts by setting the interrupt mask. */
- iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
- iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
+ outl(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
+ outl(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tulip_start_rxtx(tp);
- iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
+ outl(0, ioaddr + CSR2); /* Rx poll demand */
if (tulip_debug > 2) {
printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
- dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5),
- ioread32(ioaddr + CSR6));
+ dev->name, inl(ioaddr + CSR0), inl(ioaddr + CSR5),
+ inl(ioaddr + CSR6));
}
/* Set the timer to switch to check for link beat and perhaps switch
static void tulip_tx_timeout(struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
+ long ioaddr = dev->base_addr;
unsigned long flags;
spin_lock_irqsave (&tp->lock, flags);
dev->name);
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
|| tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
- || tp->chip_id == DM910X || tp->chip_id == ULI526X) {
+ || tp->chip_id == DM910X) {
printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
"SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
- dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
- ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+ dev->name, inl(ioaddr + CSR5), inl(ioaddr + CSR12),
+ inl(ioaddr + CSR13), inl(ioaddr + CSR14), inl(ioaddr + CSR15));
if ( ! tp->medialock && tp->mtable) {
do
--tp->cur_index;
} else if (tp->chip_id == PNIC2) {
printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, "
"CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n",
- dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6),
- (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12));
+ dev->name, (int)inl(ioaddr + CSR5), (int)inl(ioaddr + CSR6),
+ (int)inl(ioaddr + CSR7), (int)inl(ioaddr + CSR12));
} else {
printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 "
"%8.8x, resetting...\n",
- dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+ dev->name, inl(ioaddr + CSR5), inl(ioaddr + CSR12));
dev->if_port = 0;
}
tulip_restart_rxtx(tp);
/* Trigger an immediate transmit demand. */
- iowrite32(0, ioaddr + CSR1);
+ outl(0, ioaddr + CSR1);
tp->stats.tx_errors++;
tp->cur_tx++;
/* Trigger an immediate transmit demand. */
- iowrite32(0, tp->base_addr + CSR1);
+ outl(0, dev->base_addr + CSR1);
spin_unlock_irq(&tp->lock);
static void tulip_down (struct net_device *dev)
{
+ long ioaddr = dev->base_addr;
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
unsigned long flags;
del_timer_sync (&tp->timer);
spin_lock_irqsave (&tp->lock, flags);
/* Disable interrupts by clearing the interrupt mask. */
- iowrite32 (0x00000000, ioaddr + CSR7);
+ outl (0x00000000, ioaddr + CSR7);
/* Stop the Tx and Rx processes. */
tulip_stop_rxtx(tp);
/* release any unconsumed transmit buffers */
tulip_clean_tx_ring(tp);
- if (ioread32 (ioaddr + CSR6) != 0xffffffff)
- tp->stats.rx_missed_errors += ioread32 (ioaddr + CSR8) & 0xffff;
+ if (inl (ioaddr + CSR6) != 0xffffffff)
+ tp->stats.rx_missed_errors += inl (ioaddr + CSR8) & 0xffff;
spin_unlock_irqrestore (&tp->lock, flags);
static int tulip_close (struct net_device *dev)
{
+ long ioaddr = dev->base_addr;
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
int i;
netif_stop_queue (dev);
if (tulip_debug > 1)
printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
- dev->name, ioread32 (ioaddr + CSR5));
+ dev->name, inl (ioaddr + CSR5));
free_irq (dev->irq, dev);
static struct net_device_stats *tulip_get_stats(struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
+ long ioaddr = dev->base_addr;
if (netif_running(dev)) {
unsigned long flags;
spin_lock_irqsave (&tp->lock, flags);
- tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+ tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
spin_unlock_irqrestore(&tp->lock, flags);
}
}
-static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+static int netdev_ethtool_ioctl(struct net_device *dev, void __user *useraddr)
{
struct tulip_private *np = netdev_priv(dev);
- strcpy(info->driver, DRV_NAME);
- strcpy(info->version, DRV_VERSION);
- strcpy(info->bus_info, pci_name(np->pdev));
-}
+ u32 ethcmd;
+
+ if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd)))
+ return -EFAULT;
+
+ switch (ethcmd) {
+ case ETHTOOL_GDRVINFO: {
+ struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
+ strcpy(info.driver, DRV_NAME);
+ strcpy(info.version, DRV_VERSION);
+ strcpy(info.bus_info, pci_name(np->pdev));
+ if (copy_to_user(useraddr, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+ }
-static struct ethtool_ops ops = {
- .get_drvinfo = tulip_get_drvinfo
-};
+ }
+
+ return -EOPNOTSUPP;
+}
/* Provide ioctl() calls to examine the MII xcvr state. */
static int private_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
{
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
+ long ioaddr = dev->base_addr;
struct mii_ioctl_data *data = if_mii(rq);
const unsigned int phy_idx = 0;
int phy = tp->phys[phy_idx] & 0x1f;
unsigned int regnum = data->reg_num;
switch (cmd) {
+ case SIOCETHTOOL:
+ return netdev_ethtool_ioctl(dev, rq->ifr_data);
+
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
if (tp->mii_cnt)
data->phy_id = phy;
case SIOCGMIIREG: /* Read MII PHY register. */
if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) {
- int csr12 = ioread32 (ioaddr + CSR12);
- int csr14 = ioread32 (ioaddr + CSR14);
+ int csr12 = inl (ioaddr + CSR12);
+ int csr14 = inl (ioaddr + CSR14);
switch (regnum) {
case 0:
if (((csr14<<5) & 0x1000) ||
case 4:
/* Advertised value, bogus 10baseTx-FD value from CSR6. */
data->val_out =
- ((ioread32(ioaddr + CSR6) >> 3) & 0x0040) +
+ ((inl(ioaddr + CSR6) >> 3) & 0x0040) +
((csr14 >> 1) & 0x20) + 1;
data->val_out |= ((csr14 >> 9) & 0x03C0);
break;
static void set_rx_mode(struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
+ long ioaddr = dev->base_addr;
int csr6;
- csr6 = ioread32(ioaddr + CSR6) & ~0x00D5;
+ csr6 = inl(ioaddr + CSR6) & ~0x00D5;
tp->csr6 &= ~0x00D5;
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
mc_filter[1] == tp->mc_filter[1])
; /* No change. */
else if (tp->flags & IS_ASIX) {
- iowrite32(2, ioaddr + CSR13);
- iowrite32(mc_filter[0], ioaddr + CSR14);
- iowrite32(3, ioaddr + CSR13);
- iowrite32(mc_filter[1], ioaddr + CSR14);
+ outl(2, ioaddr + CSR13);
+ outl(mc_filter[0], ioaddr + CSR14);
+ outl(3, ioaddr + CSR13);
+ outl(mc_filter[1], ioaddr + CSR14);
} else if (tp->flags & COMET_MAC_ADDR) {
- iowrite32(mc_filter[0], ioaddr + 0xAC);
- iowrite32(mc_filter[1], ioaddr + 0xB0);
+ outl(mc_filter[0], ioaddr + 0xAC);
+ outl(mc_filter[1], ioaddr + 0xB0);
}
tp->mc_filter[0] = mc_filter[0];
tp->mc_filter[1] = mc_filter[1];
entry = tp->cur_tx++ % TX_RING_SIZE;
if (entry != 0) {
- /* Avoid a chip errata by prefixing a dummy entry. Don't do
- this on the ULI526X as it triggers a different problem */
- if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) {
- tp->tx_buffers[entry].skb = NULL;
- tp->tx_buffers[entry].mapping = 0;
- tp->tx_ring[entry].length =
- (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
- tp->tx_ring[entry].buffer1 = 0;
- /* Must set DescOwned later to avoid race with chip */
- dummy = entry;
- entry = tp->cur_tx++ % TX_RING_SIZE;
- }
+ /* Avoid a chip errata by prefixing a dummy entry. */
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ tp->tx_ring[entry].length =
+ (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
+ tp->tx_ring[entry].buffer1 = 0;
+ /* Must set DescOwned later to avoid race with chip */
+ dummy = entry;
+ entry = tp->cur_tx++ % TX_RING_SIZE;
}
tp->tx_buffers[entry].skb = NULL;
netif_stop_queue(dev);
/* Trigger an immediate transmit demand. */
- iowrite32(0, ioaddr + CSR1);
+ outl(0, ioaddr + CSR1);
}
spin_unlock_irqrestore(&tp->lock, flags);
}
- iowrite32(csr6, ioaddr + CSR6);
+ outl(csr6, ioaddr + CSR6);
}
#ifdef CONFIG_TULIP_MWI
}
#endif
-/*
- * Chips that have the MRM/reserved bit quirk and the burst quirk. That
- * is the DM910X and the on chip ULi devices
- */
-
-static int tulip_uli_dm_quirk(struct pci_dev *pdev)
-{
- if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
- return 1;
- if (pdev->vendor == 0x10b9 && pdev->device == 0x5261)
- return 1;
- if (pdev->vendor == 0x10b9 && pdev->device == 0x5263)
- return 1;
- return 0;
-}
-
static int __devinit tulip_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct tulip_private *tp;
/* See note below on the multiport cards. */
static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'};
- static struct pci_device_id early_486_chipsets[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
- { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
- { },
- };
static int last_irq;
static int multiport_cnt; /* For four-port boards w/one EEPROM */
u8 chip_rev;
unsigned short sum;
unsigned char *ee_data;
struct net_device *dev;
- void __iomem *ioaddr;
+ long ioaddr;
static int board_idx = -1;
int chip_idx = ent->driver_data;
const char *chip_name = tulip_tbl[chip_idx].chip_name;
* without the workarounds being on.
*/
- /* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache
- aligned. Aries might need this too. The Saturn errata are not
- pretty reading but thankfully it's an old 486 chipset.
-
- 2. The dreaded SiS496 486 chipset. Same workaround as Intel
- Saturn.
+ /* Intel Saturn. Switch to 8 long words burst, 8 long word cache aligned
+ Aries might need this too. The Saturn errata are not pretty reading but
+ thankfully it's an old 486 chipset.
*/
- if (pci_dev_present(early_486_chipsets)) {
+ if (pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424, NULL)) {
+ csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift);
+ force_csr0 = 1;
+ }
+ /* The dreaded SiS496 486 chipset. Same workaround as above. */
+ if (pci_find_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, NULL)) {
csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift);
force_csr0 = 1;
}
csr0 &= ~0xfff10000; /* zero reserved bits 31:20, 16 */
/* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */
- if (tulip_uli_dm_quirk(pdev)) {
+ if ((pdev->vendor == 0x1282 && pdev->device == 0x9102)
+ || (pdev->vendor == 0x10b9 && pdev->device == 0x5261))
csr0 &= ~0x01f100ff;
+
#if defined(__sparc__)
+ /* DM9102A needs 32-dword alignment/burst length on sparc - chip bug? */
+ if ((pdev->vendor == 0x1282 && pdev->device == 0x9102)
+ || (pdev->vendor == 0x10b9 && pdev->device == 0x5261))
csr0 = (csr0 & ~0xff00) | 0xe000;
#endif
- }
+
/*
* And back to business
*/
return i;
}
+ ioaddr = pci_resource_start (pdev, 0);
irq = pdev->irq;
/* alloc_etherdev ensures aligned and zeroed private structures */
goto err_out_free_netdev;
#ifndef USE_IO_OPS
- ioaddr = pci_iomap(pdev, 1, tulip_tbl[chip_idx].io_size);
-#else
- ioaddr = pci_iomap(pdev, 0, tulip_tbl[chip_idx].io_size);
-#endif
+ ioaddr = (unsigned long) ioremap (pci_resource_start (pdev, 1),
+ tulip_tbl[chip_idx].io_size);
if (!ioaddr)
goto err_out_free_res;
+#endif
pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
tp->timer.data = (unsigned long)dev;
tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
- dev->base_addr = (unsigned long)ioaddr;
+ dev->base_addr = ioaddr;
#ifdef CONFIG_TULIP_MWI
if (!force_csr0 && (tp->flags & HAS_PCI_MWI))
#endif
/* Clear the missed-packet counter. */
- ioread32(ioaddr + CSR8);
+ inl(ioaddr + CSR8);
/* The station address ROM is read byte serially. The register must
be polled, waiting for the value to be read bit serially from the
if (chip_idx == LC82C168) {
for (i = 0; i < 3; i++) {
int value, boguscnt = 100000;
- iowrite32(0x600 | i, ioaddr + 0x98);
+ outl(0x600 | i, ioaddr + 0x98);
do
- value = ioread32(ioaddr + CSR9);
+ value = inl(ioaddr + CSR9);
while (value < 0 && --boguscnt > 0);
put_unaligned(le16_to_cpu(value), ((u16*)dev->dev_addr) + i);
sum += value & 0xffff;
}
} else if (chip_idx == COMET) {
/* No need to read the EEPROM. */
- put_unaligned(cpu_to_le32(ioread32(ioaddr + 0xA4)), (u32 *)dev->dev_addr);
- put_unaligned(cpu_to_le16(ioread32(ioaddr + 0xA8)), (u16 *)(dev->dev_addr + 4));
+ put_unaligned(cpu_to_le32(inl(ioaddr + 0xA4)), (u32 *)dev->dev_addr);
+ put_unaligned(cpu_to_le16(inl(ioaddr + 0xA8)), (u16 *)(dev->dev_addr + 4));
for (i = 0; i < 6; i ++)
sum += dev->dev_addr[i];
} else {
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = &poll_tulip;
#endif
- SET_ETHTOOL_OPS(dev, &ops);
if (register_netdev(dev))
goto err_out_free_ring;
- printk(KERN_INFO "%s: %s rev %d at %p,",
+ printk(KERN_INFO "%s: %s rev %d at %#3lx,",
dev->name, chip_name, chip_rev, ioaddr);
pci_set_drvdata(pdev, dev);
switch (chip_idx) {
case DC21140:
case DM910X:
- case ULI526X:
default:
if (tp->mtable)
- iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
+ outl(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
break;
case DC21142:
if (tp->mii_cnt || tulip_media_cap[dev->if_port] & MediaIsMII) {
- iowrite32(csr6_mask_defstate, ioaddr + CSR6);
- iowrite32(0x0000, ioaddr + CSR13);
- iowrite32(0x0000, ioaddr + CSR14);
- iowrite32(csr6_mask_hdcap, ioaddr + CSR6);
+ outl(csr6_mask_defstate, ioaddr + CSR6);
+ outl(0x0000, ioaddr + CSR13);
+ outl(0x0000, ioaddr + CSR14);
+ outl(csr6_mask_hdcap, ioaddr + CSR6);
} else
t21142_start_nway(dev);
break;
case PNIC2:
/* just do a reset for sanity sake */
- iowrite32(0x0000, ioaddr + CSR13);
- iowrite32(0x0000, ioaddr + CSR14);
+ outl(0x0000, ioaddr + CSR13);
+ outl(0x0000, ioaddr + CSR14);
break;
case LC82C168:
if ( ! tp->mii_cnt) {
tp->nway = 1;
tp->nwayset = 0;
- iowrite32(csr6_ttm | csr6_ca, ioaddr + CSR6);
- iowrite32(0x30, ioaddr + CSR12);
- iowrite32(0x0001F078, ioaddr + CSR6);
- iowrite32(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */
+ outl(csr6_ttm | csr6_ca, ioaddr + CSR6);
+ outl(0x30, ioaddr + CSR12);
+ outl(0x0001F078, ioaddr + CSR6);
+ outl(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */
}
break;
case MX98713:
case COMPEX9881:
- iowrite32(0x00000000, ioaddr + CSR6);
- iowrite32(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */
- iowrite32(0x00000001, ioaddr + CSR13);
+ outl(0x00000000, ioaddr + CSR6);
+ outl(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */
+ outl(0x00000001, ioaddr + CSR13);
break;
case MX98715:
case MX98725:
- iowrite32(0x01a80000, ioaddr + CSR6);
- iowrite32(0xFFFFFFFF, ioaddr + CSR14);
- iowrite32(0x00001000, ioaddr + CSR12);
+ outl(0x01a80000, ioaddr + CSR6);
+ outl(0xFFFFFFFF, ioaddr + CSR14);
+ outl(0x00001000, ioaddr + CSR12);
break;
case COMET:
/* No initialization necessary. */
err_out_mtable:
if (tp->mtable)
kfree (tp->mtable);
- pci_iounmap(pdev, ioaddr);
+#ifndef USE_IO_OPS
+ iounmap((void *)ioaddr);
err_out_free_res:
+#endif
pci_release_regions (pdev);
err_out_free_netdev:
tp->rx_ring, tp->rx_ring_dma);
if (tp->mtable)
kfree (tp->mtable);
- pci_iounmap(pdev, tp->base_addr);
+#ifndef USE_IO_OPS
+ iounmap((void *)dev->base_addr);
+#endif
free_netdev (dev);
pci_release_regions (pdev);
pci_set_drvdata (pdev, NULL);
git://git.onelab.eu / linux-2.6.git / blobdiff