* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
- * For information see http://hq.pm.waw.pl/hdlc/
+ * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
*
* Sources of information:
* Hitachi HD64572 SCA-II User's Manual
static int pci_clock_freq = 33000000;
#define CLOCK_BASE pci_clock_freq
-#define PCI_VENDOR_ID_GORAMO 0x10B5 /* uses PLX:9050 ID - this card */
-#define PCI_DEVICE_ID_PCI200SYN 0x9050 /* doesn't have its own ID */
-
-
/*
* PLX PCI9052 local configuration and shared runtime registers.
* This structure can be used to access 9052 registers (memory mapped).
int i;
card_t *card = pci_get_drvdata(pdev);
- for(i = 0; i < 2; i++)
+ for (i = 0; i < 2; i++)
if (card->ports[i].card) {
struct net_device *dev = port_to_dev(&card->ports[i]);
unregister_hdlc_device(dev);
card->rambase == NULL) {
printk(KERN_ERR "pci200syn: ioremap() failed\n");
pci200_pci_remove_one(pdev);
+ return -EFAULT;
}
/* Reset PLX */
" %u RX packets rings\n", ramsize / 1024, ramphys,
pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+ if (pdev->subsystem_device == PCI_DEVICE_ID_PLX_9050) {
+ printk(KERN_ERR "Detected PCI200SYN card with old "
+ "configuration data.\n");
+ printk(KERN_ERR "See <http://www.kernel.org/pub/"
+ "linux/utils/net/hdlc/pci200syn/> for update.\n");
+ printk(KERN_ERR "The card will stop working with"
+ " future versions of Linux if not updated.\n");
+ }
+
if (card->tx_ring_buffers < 1) {
printk(KERN_ERR "pci200syn: RAM test failed\n");
pci200_pci_remove_one(pdev);
writew(readw(p) | 0x0040, p);
/* Allocate IRQ */
- if(request_irq(pdev->irq, sca_intr, SA_SHIRQ, devname, card)) {
+ if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, devname, card)) {
printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
pdev->irq);
pci200_pci_remove_one(pdev);
sca_init(card, 0);
- for(i = 0; i < 2; i++) {
+ for (i = 0; i < 2; i++) {
port_t *port = &card->ports[i];
struct net_device *dev = port_to_dev(port);
hdlc_device *hdlc = dev_to_hdlc(dev);
hdlc->xmit = sca_xmit;
port->settings.clock_type = CLOCK_EXT;
port->card = card;
- if(register_hdlc_device(dev)) {
+ if (register_hdlc_device(dev)) {
printk(KERN_ERR "pci200syn: unable to register hdlc "
"device\n");
port->card = NULL;
static struct pci_device_id pci200_pci_tbl[] __devinitdata = {
- { PCI_VENDOR_ID_GORAMO, PCI_DEVICE_ID_PCI200SYN, PCI_ANY_ID,
- PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
+ PCI_DEVICE_ID_PLX_9050, 0, 0, 0 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
+ PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
{ 0, }
};
printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n");
return -EINVAL;
}
- return pci_module_init(&pci200_pci_driver);
+ return pci_register_driver(&pci200_pci_driver);
}