#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/init.h> /* for __init and __devinit */
+/* #define PCI_DEBUG enable ASSERT */
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/irq.h> /* for struct irq_region support */
#include <asm/pdc.h>
-#include <asm/pdcpat.h>
#include <asm/page.h>
#include <asm/segment.h>
#include <asm/system.h>
#define DBG_PAT(x...)
#endif
-#ifdef DEBUG_LBA
-#undef ASSERT
-#define ASSERT(expr) \
- if(!(expr)) { \
- printk("\n%s:%d: Assertion " #expr " failed!\n", \
- __FILE__, __LINE__); \
- panic(#expr); \
- }
-#else
-#define ASSERT(expr)
-#endif
-
-
/*
** Config accessor functions only pass in the 8-bit bus number and not
** the 8-bit "PCI Segment" number. Each LBA will be assigned a PCI bus
#define LBA_HINT_CFG 0x0310
#define LBA_HINT_BASE 0x0380 /* 14 registers at every 8 bytes. */
-#define LBA_BUS_MODE 0x0620
-
/* ERROR regs are needed for config cycle kluges */
#define LBA_ERROR_CONFIG 0x0680
#define LBA_SMART_MODE 0x20
#define LBA_IOSAPIC_BASE 0x800 /* Offset of IRQ logic */
/* non-postable I/O port space, densely packed */
-#ifdef CONFIG_PARISC64
+#ifdef __LP64__
#define LBA_ASTRO_PORT_BASE (0xfffffffffee00000UL)
#else
#define LBA_ASTRO_PORT_BASE (0xfee00000UL)
#endif
-#define ELROY_HVERS 0x782
-#define MERCURY_HVERS 0x783
-#define QUICKSILVER_HVERS 0x784
-
-static inline int IS_ELROY(struct parisc_device *d)
-{
- return (d->id.hversion == ELROY_HVERS);
-}
-
-static inline int IS_MERCURY(struct parisc_device *d)
-{
- return (d->id.hversion == MERCURY_HVERS);
-}
-
-static inline int IS_QUICKSILVER(struct parisc_device *d)
-{
- return (d->id.hversion == QUICKSILVER_HVERS);
-}
-
/*
** lba_device: Per instance Elroy data structure
spinlock_t lba_lock;
void *iosapic_obj;
-#ifdef CONFIG_PARISC64
+#ifdef __LP64__
unsigned long iop_base; /* PA_VIEW - for IO port accessor funcs */
#endif
{
u8 first_bus = d->hba.hba_bus->secondary;
u8 last_sub_bus = d->hba.hba_bus->subordinate;
+#if 0
+/* FIXME - see below in this function */
+ u8 dev = PCI_SLOT(dfn);
+ u8 func = PCI_FUNC(dfn);
+#endif
ASSERT(bus >= first_bus);
ASSERT(bus <= last_sub_bus);
return(FALSE);
}
+#if 0
+/*
+** FIXME: Need to implement code to fill the devices bitmap based
+** on contents of the local pci_bus tree "data base".
+** pci_register_ops() walks the bus for us and builds the tree.
+** For now, always do the config cycle.
+*/
+ bus -= first_bus;
+
+ return (((d->devices[bus][dev]) >> func) & 0x1);
+#else
return TRUE;
+#endif
}
return(data);
}
-#ifdef CONFIG_PARISC64
-#define pat_cfg_addr(bus, devfn, addr) (((bus) << 16) | ((devfn) << 8) | (addr))
-
-static int pat_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
-{
- int tok = pat_cfg_addr(bus->number, devfn, pos);
- u32 tmp;
- int ret = pdc_pat_io_pci_cfg_read(tok, size, &tmp);
-
- DBG_CFG("%s(%d:%d.%d+0x%02x) -> 0x%x %d\n", __FUNCTION__, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), pos, tmp, ret);
-
- switch (size) {
- case 1: *data = (u8) tmp; return (tmp == (u8) ~0);
- case 2: *data = (u16) tmp; return (tmp == (u16) ~0);
- case 4: *data = (u32) tmp; return (tmp == (u32) ~0);
- }
- *data = ~0;
- return (ret);
-}
-
-static int pat_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data)
-{
- int tok = pat_cfg_addr(bus->number, devfn, pos);
- int ret = pdc_pat_io_pci_cfg_write(tok, size, data);
-
- DBG_CFG("%s(%d:%d.%d+0x%02x, 0x%lx/%d)\n", __FUNCTION__, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), pos, data, size);
- return (ret);
-}
-
-static struct pci_ops pat_cfg_ops = {
- .read = pat_cfg_read,
- .write = pat_cfg_write,
-};
-#else
-/* keep the compiler from complaining about undeclared variables */
-#define pat_cfg_ops lba_cfg_ops
-#endif
static int lba_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
{
}
DBG_CFG("%s(%x+%2x) = 0x%x (c)\n", __FUNCTION__, tok, pos, data);
-
/* Basic Algorithm */
LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
switch(size) {
}
-#ifdef CONFIG_PARISC64
+#ifdef __LP64__
/*
** Determine if a device is already configured.
}
}
}
-#else
-#define lba_claim_dev_resources(dev)
#endif
lba_dump_res(&iomem_resource, 2);
}
-#ifdef CONFIG_PARISC64
+#ifdef __LP64__
if (ldev->hba.gmmio_space.flags) {
err = request_resource(&iomem_resource, &(ldev->hba.gmmio_space));
if (err < 0) {
bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK);
#endif
+#ifdef __LP64__
if (is_pdc_pat()) {
/* Claim resources for PDC's devices */
lba_claim_dev_resources(dev);
}
+#endif
/*
** P2PB's have no IRQs. ignore them.
};
-#ifdef CONFIG_PARISC64
+#ifdef __LP64__
#define PIOP_TO_GMMIO(lba, addr) \
((lba)->iop_base + (((addr)&0xFFFC)<<10) + ((addr)&3))
}
}
}
-#else
-/* keep compiler from complaining about missing declarations */
-#define lba_pat_port_ops lba_astro_port_ops
-#define lba_pat_resources(pa_dev, lba_dev)
-#endif /* CONFIG_PARISC64 */
+#endif /* __LP64__ */
static void
unsigned long rsize;
int lba_num;
-#ifdef CONFIG_PARISC64
+#ifdef __LP64__
/*
** Sign extend all BAR values on "legacy" platforms.
** "Sprockets" PDC (Forte/Allegro) initializes everything
printk("\n");
#endif /* DEBUG_LBA_PAT */
-#ifdef CONFIG_PARISC64
+#ifdef __LP64__
/*
* FIXME add support for PDC_PAT_IO "Get slot status" - OLAR support
* Only N-Class and up can really make use of Get slot status.
** have work to do.
*/
static int __init
-lba_driver_probe(struct parisc_device *dev)
+lba_driver_callback(struct parisc_device *dev)
{
struct lba_device *lba_dev;
struct pci_bus *lba_bus;
/* Read HW Rev First */
func_class = READ_REG32(dev->hpa + LBA_FCLASS);
-
- if (IS_ELROY(dev)) {
- func_class &= 0xf;
- switch (func_class) {
- case 0: version = "TR1.0"; break;
- case 1: version = "TR2.0"; break;
- case 2: version = "TR2.1"; break;
- case 3: version = "TR2.2"; break;
- case 4: version = "TR3.0"; break;
- case 5: version = "TR4.0"; break;
- default: version = "TR4+";
- }
- printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xf, dev->hpa);
-
- /* Just in case we find some prototypes... */
- } else if (IS_MERCURY(dev) || IS_QUICKSILVER(dev)) {
- func_class &= 0xff;
- version = kmalloc(6, GFP_KERNEL);
- sprintf(version,"TR%d.%d",(func_class >> 4),(func_class & 0xf));
- /* We could use one printk for both and have it outside,
- * but for the mask for func_class.
- */
- printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xff, dev->hpa);
+ func_class &= 0xf;
+
+ switch (func_class) {
+ case 0: version = "TR1.0"; break;
+ case 1: version = "TR2.0"; break;
+ case 2: version = "TR2.1"; break;
+ case 3: version = "TR2.2"; break;
+ case 4: version = "TR3.0"; break;
+ case 5: version = "TR4.0"; break;
+ default: version = "TR4+";
}
+ printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
+ MODULE_NAME, version, func_class & 0xf, dev->hpa);
+
+ /* Just in case we find some prototypes... */
if (func_class < 2) {
- printk(KERN_WARNING "Can't support LBA older than TR2.1"
- " - continuing under adversity.\n");
+ printk(KERN_WARNING "Can't support LBA older than TR2.1 "
+ "- continuing under adversity.\n");
}
/*
/* ---------- Third : setup I/O Port and MMIO resources --------- */
+#ifdef __LP64__
if (is_pdc_pat()) {
/* PDC PAT firmware uses PIOP region of GMMIO space. */
pci_port = &lba_pat_port_ops;
+
/* Go ask PDC PAT what resources this LBA has */
lba_pat_resources(dev, lba_dev);
- } else {
+ } else
+#endif
+ {
/* Sprockets PDC uses NPIOP region */
pci_port = &lba_astro_port_ops;
dev->dev.platform_data = lba_dev;
lba_bus = lba_dev->hba.hba_bus =
pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
- is_pdc_pat() ? &pat_cfg_ops : &lba_cfg_ops,
- NULL);
+ &lba_cfg_ops, NULL);
+#ifdef __LP64__
if (is_pdc_pat()) {
/* assign resources to un-initialized devices */
DBG_PAT("LBA pci_bus_assign_resources()\n");
lba_dump_res(&lba_dev->hba.lmmio_space, 2);
#endif
}
+#endif
/*
** Once PCI register ops has walked the bus, access to config
}
static struct parisc_device_id lba_tbl[] = {
- { HPHW_BRIDGE, HVERSION_REV_ANY_ID, ELROY_HVERS, 0xa },
- { HPHW_BRIDGE, HVERSION_REV_ANY_ID, MERCURY_HVERS, 0xa },
- { HPHW_BRIDGE, HVERSION_REV_ANY_ID, QUICKSILVER_HVERS, 0xa },
+ { HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x782, 0xa },
{ 0, }
};
static struct parisc_driver lba_driver = {
.name = MODULE_NAME,
.id_table = lba_tbl,
- .probe = lba_driver_probe,
+ .probe = lba_driver_callback,
};
/*
git://git.onelab.eu / linux-2.6.git / blobdiff