* (C) Copyright 2000 Linuxcare, Inc.
* (C) Copyright 2000 Linuxcare Canada, Inc.
* (C) Copyright 2000 Martin K. Petersen <mkp@linuxcare.com>
- * (C) Copyright 2000 Alex deVries <alex@linuxcare.com>
+ * (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca>
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
+ * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* Major changes to get basic interrupt infrastructure working to
* hopefully be able to support all SuperIO devices. Currently
* works with serial. -- John Marvin <jsm@fc.hp.com>
+ *
+ * Converted superio_init() to be a PCI_FIXUP_FINAL callee.
+ * -- Kyle McMartin <kyle@parisc-linux.org>
*/
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <asm/io.h>
#include <asm/hardware.h>
-#include <asm/irq.h>
#include <asm/superio.h>
-#define SUPERIO_IDE_MAX_RETRIES 25
-
static struct superio_device sio_dev;
#define DBG_INIT(x...)
#endif
+#define SUPERIO "SuperIO"
+#define PFX SUPERIO ": "
+
static irqreturn_t
-superio_interrupt(int irq, void *devp, struct pt_regs *regs)
+superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
{
- struct superio_device *sio = (struct superio_device *)devp;
u8 results;
u8 local_irq;
results = inb(IC_PIC1+0);
+ /*
+ * Bit 7: 1 = active Interrupt; 0 = no Interrupt pending
+ * Bits 6-3: zero
+ * Bits 2-0: highest priority, active requesting interrupt ID (0-7)
+ */
if ((results & 0x80) == 0) {
-#ifndef CONFIG_SMP
- /* HACK: need to investigate why this happens if SMP enabled */
- BUG(); /* This shouldn't happen */
-#endif
- return IRQ_HANDLED;
+ /* I suspect "spurious" interrupts are from unmasking an IRQ.
+ * We don't know if an interrupt was/is pending and thus
+ * just call the handler for that IRQ as if it were pending.
+ */
+ return IRQ_NONE;
}
/* Check to see which device is interrupting */
-
local_irq = results & 0x0f;
if (local_irq == 2 || local_irq > 7) {
- printk(KERN_ERR "SuperIO: slave interrupted!\n");
- BUG();
+ printk(KERN_ERR PFX "slave interrupted!\n");
return IRQ_HANDLED;
}
outb(OCW3_ISR,IC_PIC1+0);
results = inb(IC_PIC1+0);
if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
- printk(KERN_WARNING "SuperIO: spurious interrupt!\n");
+ printk(KERN_WARNING PFX "spurious interrupt!\n");
return IRQ_HANDLED;
}
}
/* Call the appropriate device's interrupt */
- do_irq(&sio->irq_region->action[local_irq],
- sio->irq_region->data.irqbase + local_irq,
- regs);
-
- /* set EOI */
+ __do_IRQ(local_irq, regs);
+ /* set EOI - forces a new interrupt if a lower priority device
+ * still needs service.
+ */
outb((OCW2_SEOI|local_irq),IC_PIC1 + 0);
return IRQ_HANDLED;
}
/* Initialize Super I/O device */
-
-static void __devinit
-superio_init(struct superio_device *sio)
+static void
+superio_init(struct pci_dev *pcidev)
{
+ struct superio_device *sio = &sio_dev;
struct pci_dev *pdev = sio->lio_pdev;
u16 word;
/* ...then properly fixup the USB to point at suckyio PIC */
sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
- printk (KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
- pci_name(pdev),pdev->irq);
+ printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+ pci_name(pdev), pdev->irq);
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
sio->sp1_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base);
+ printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
sio->sp2_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 2 at 0x%x\n", sio->sp2_base);
+ printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
sio->pp_base &= ~1;
- printk (KERN_INFO "SuperIO: Parallel port at 0x%x\n", sio->pp_base);
+ printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
sio->fdc_base &= ~1;
- printk (KERN_INFO "SuperIO: Floppy controller at 0x%x\n", sio->fdc_base);
+ printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
sio->acpi_base &= ~1;
- printk (KERN_INFO "SuperIO: ACPI at 0x%x\n", sio->acpi_base);
+ printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
request_region (IC_PIC1, 0x1f, "pic1");
request_region (IC_PIC2, 0x1f, "pic2");
/* Setup USB power regulation */
outb(1, sio->acpi_base + USB_REG_CR);
if (inb(sio->acpi_base + USB_REG_CR) & 1)
- printk(KERN_INFO "SuperIO: USB regulator enabled\n");
+ printk(KERN_INFO PFX "USB regulator enabled\n");
else
- printk(KERN_ERR "USB regulator not initialized!\n");
+ printk(KERN_ERR PFX "USB regulator not initialized!\n");
if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
- "SuperIO", (void *)sio)) {
+ SUPERIO, (void *)sio)) {
- printk(KERN_ERR "SuperIO: could not get irq\n");
+ printk(KERN_ERR PFX "could not get irq\n");
BUG();
return;
}
sio->suckyio_irq_enabled = 1;
}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
-
-static void
-superio_disable_irq(void *dev, int local_irq)
+static void superio_disable_irq(unsigned int irq)
{
u8 r8;
- if ((local_irq < 1) || (local_irq == 2) || (local_irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number.\n");
- BUG();
- return;
+ if ((irq < 1) || (irq == 2) || (irq > 7)) {
+ printk(KERN_ERR PFX "Illegal irq number.\n");
+ BUG();
+ return;
}
/* Mask interrupt */
r8 = inb(IC_PIC1+1);
- r8 |= (1 << local_irq);
+ r8 |= (1 << irq);
outb (r8,IC_PIC1+1);
}
-static void
-superio_enable_irq(void *dev, int local_irq)
+static void superio_enable_irq(unsigned int irq)
{
u8 r8;
- if ((local_irq < 1) || (local_irq == 2) || (local_irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number (%d).\n", local_irq);
- BUG();
- return;
+ if ((irq < 1) || (irq == 2) || (irq > 7)) {
+ printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
+ BUG();
+ return;
}
/* Unmask interrupt */
r8 = inb(IC_PIC1+1);
- r8 &= ~(1 << local_irq);
+ r8 &= ~(1 << irq);
outb (r8,IC_PIC1+1);
}
-
-static void
-superio_mask_irq(void *dev, int local_irq)
+static unsigned int superio_startup_irq(unsigned int irq)
{
- BUG();
+ superio_enable_irq(irq);
+ return 0;
}
-static void
-superio_unmask_irq(void *dev, int local_irq)
-{
- BUG();
-}
-
-static struct irq_region_ops superio_irq_ops = {
- .disable_irq = superio_disable_irq,
- .enable_irq = superio_enable_irq,
- .mask_irq = superio_mask_irq,
- .unmask_irq = superio_unmask_irq
+static struct hw_interrupt_type superio_interrupt_type = {
+ .typename = SUPERIO,
+ .startup = superio_startup_irq,
+ .shutdown = superio_disable_irq,
+ .enable = superio_enable_irq,
+ .disable = superio_disable_irq,
+ .ack = no_ack_irq,
+ .end = no_end_irq,
};
#ifdef DEBUG_SUPERIO_INIT
int superio_fixup_irq(struct pci_dev *pcidev)
{
- int local_irq;
+ int local_irq, i;
#ifdef DEBUG_SUPERIO_INIT
int fn;
__builtin_return_address(0));
#endif
- if (!sio_dev.irq_region) {
- /* Allocate an irq region for SuperIO devices */
- sio_dev.irq_region = alloc_irq_region(SUPERIO_NIRQS,
- &superio_irq_ops,
- "SuperIO", (void *) &sio_dev);
- if (!sio_dev.irq_region) {
- printk(KERN_WARNING "SuperIO: alloc_irq_region failed\n");
- return -1;
- }
+ for (i = 0; i < 16; i++) {
+ irq_desc[i].handler = &superio_interrupt_type;
}
/*
break;
}
- return(sio_dev.irq_region->data.irqbase + local_irq);
+ return local_irq;
}
static struct uart_port serial[] = {
}
};
-void __devinit
-superio_serial_init(void)
+static void __devinit superio_serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
int retval;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- extern void serial8250_console_init(void); /* drivers/serial/8250.c */
-#endif
- if (!sio_dev.irq_region)
- return; /* superio not present */
-
- if (!serial) {
- printk(KERN_WARNING "SuperIO: Could not get memory for serial struct.\n");
- return;
- }
-
serial[0].iobase = sio_dev.sp1_base;
- serial[0].irq = sio_dev.irq_region->data.irqbase + SP1_IRQ;
+ serial[0].irq = SP1_IRQ;
+ spin_lock_init(&serial[0].lock);
retval = early_serial_setup(&serial[0]);
if (retval < 0) {
- printk(KERN_WARNING "SuperIO: Register Serial #0 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- serial8250_console_init();
-#endif
-
serial[1].iobase = sio_dev.sp2_base;
- serial[1].irq = sio_dev.irq_region->data.irqbase + SP2_IRQ;
+ serial[1].irq = SP2_IRQ;
+ spin_lock_init(&serial[1].lock);
retval = early_serial_setup(&serial[1]);
if (retval < 0)
- printk(KERN_WARNING "SuperIO: Register Serial #1 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */
}
-static void __devinit
-superio_parport_init(void)
+static void __devinit superio_parport_init(void)
{
#ifdef CONFIG_PARPORT_PC
if (!parport_pc_probe_port(sio_dev.pp_base,
0 /*base_hi*/,
- sio_dev.irq_region->data.irqbase + PAR_IRQ,
+ PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
NULL /*struct pci_dev* */) )
- printk(KERN_WARNING "SuperIO: Probing parallel port failed.\n");
+ printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
}
-static u8 superio_ide_inb (unsigned long port);
-static unsigned long superio_ide_status[2];
-static unsigned long superio_ide_select[2];
-static unsigned long superio_ide_dma_status[2];
-
-void superio_fixup_pci(struct pci_dev *pdev)
+static void superio_fixup_pci(struct pci_dev *pdev)
{
u8 prog;
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog);
}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
-/* Because of a defect in Super I/O, all reads of the PCI DMA status
- * registers, IDE status register and the IDE select register need to be
- * retried
- */
-static u8 superio_ide_inb (unsigned long port)
-{
- if (port == superio_ide_status[0] ||
- port == superio_ide_status[1] ||
- port == superio_ide_select[0] ||
- port == superio_ide_select[1] ||
- port == superio_ide_dma_status[0] ||
- port == superio_ide_dma_status[1]) {
- u8 tmp;
- int retries = SUPERIO_IDE_MAX_RETRIES;
-
- /* printk(" [ reading port 0x%x with retry ] ", port); */
-
- do {
- tmp = inb(port);
- if (tmp == 0)
- udelay(50);
- } while (tmp == 0 && retries-- > 0);
-
- return tmp;
- }
-
- return inb(port);
-}
-
-void __init superio_ide_init_iops (struct hwif_s *hwif)
-{
- u32 base, dmabase;
- u8 tmp;
- struct pci_dev *pdev = hwif->pci_dev;
- u8 port = hwif->channel;
-
- base = pci_resource_start(pdev, port * 2) & ~3;
- dmabase = pci_resource_start(pdev, 4) & ~3;
-
- superio_ide_status[port] = base + IDE_STATUS_OFFSET;
- superio_ide_select[port] = base + IDE_SELECT_OFFSET;
- superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa);
-
- /* Clear error/interrupt, enable dma */
- tmp = superio_ide_inb(superio_ide_dma_status[port]);
- outb(tmp | 0x66, superio_ide_dma_status[port]);
-
- /* We need to override inb to workaround a SuperIO errata */
- hwif->INB = superio_ide_inb;
-}
-static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit
+superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
+ struct superio_device *sio = &sio_dev;
/*
** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a
dev->subsystem_vendor, dev->subsystem_device,
dev->class);
- superio_init(&sio_dev);
+ if (!sio->suckyio_irq_enabled)
+ BUG(); /* Enabled by PCI_FIXUP_FINAL */
if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
superio_parport_init();
DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n");
}
- /* Let appropriate other driver claim this device. */
+ /* Let appropriate other driver claim this device. */
return -ENODEV;
}
static struct pci_device_id superio_tbl[] = {
- { PCI_VENDOR_ID_NS, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
{ 0, }
};
static struct pci_driver superio_driver = {
- .name = "SuperIO",
- .id_table = superio_tbl,
- .probe = superio_probe,
+ .name = SUPERIO,
+ .id_table = superio_tbl,
+ .probe = superio_probe,
};
static int __init superio_modinit(void)
{
- return pci_module_init(&superio_driver);
+ return pci_register_driver(&superio_driver);
}
static void __exit superio_exit(void)
pci_unregister_driver(&superio_driver);
}
-
module_init(superio_modinit);
module_exit(superio_exit);