#include <linux/parport.h>
#include <linux/parport_pc.h>
+#include <linux/via.h>
#include <asm/parport.h>
#define PARPORT_PC_MAX_PORTS PARPORT_MAX
/* ITE support maintained by Rich Liu <richliu@poorman.org> */
static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
- int autodma)
+ int autodma, struct parport_pc_via_data *via)
{
short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
struct resource *base_res;
return 0;
}
-/* Via support maintained by Jeff Garzik <jgarzik@pobox.com> */
-static int __devinit sio_via_686a_probe (struct pci_dev *pdev, int autoirq,
- int autodma)
+/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
+ based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
+static int __initdata parport_init_mode = 0;
+
+/* Data for two known VIA chips */
+static struct parport_pc_via_data via_686a_data __devinitdata = {
+ 0x51,
+ 0x50,
+ 0x85,
+ 0x02,
+ 0xE2,
+ 0xF0,
+ 0xE6
+};
+static struct parport_pc_via_data via_8231_data __devinitdata = {
+ 0x45,
+ 0x44,
+ 0x50,
+ 0x04,
+ 0xF2,
+ 0xFA,
+ 0xF6
+};
+
+static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
+ int autodma, struct parport_pc_via_data *via)
{
- u8 tmp;
+ u8 tmp, tmp2, siofunc;
+ u8 ppcontrol = 0;
int dma, irq;
- unsigned port1, port2, have_eppecp;
+ unsigned port1, port2;
+ unsigned have_epp = 0;
+
+ printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
+ switch(parport_init_mode)
+ {
+ case 1:
+ printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ break;
+ case 2:
+ printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
+ case 3:
+ printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_EPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ have_epp = 1;
+ break;
+ case 4:
+ printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
+ case 5:
+ printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+ have_epp = 1;
+ break;
+ default:
+ printk(KERN_DEBUG "parport_pc: probing current configuration\n");
+ siofunc = VIA_FUNCTION_PROBE;
+ break;
+ }
/*
- * unlock super i/o configuration, set 0x85_1
- */
- pci_read_config_byte (pdev, 0x85, &tmp);
- tmp |= (1 << 1);
- pci_write_config_byte (pdev, 0x85, tmp);
-
- /*
- * Super I/O configuration, index port == 3f0h, data port == 3f1h
+ * unlock super i/o configuration
*/
+ pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+ tmp |= via->via_pci_superio_config_data;
+ pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+ /* Bits 1-0: Parallel Port Mode / Enable */
+ outb(via->viacfg_function, VIA_CONFIG_INDEX);
+ tmp = inb (VIA_CONFIG_DATA);
+ /* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
+ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+ tmp2 = inb (VIA_CONFIG_DATA);
+ if (siofunc == VIA_FUNCTION_PROBE)
+ {
+ siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+ ppcontrol = tmp2;
+ }
+ else
+ {
+ tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+ tmp |= siofunc;
+ outb(via->viacfg_function, VIA_CONFIG_INDEX);
+ outb(tmp, VIA_CONFIG_DATA);
+ tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+ tmp2 |= ppcontrol;
+ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+ outb(tmp2, VIA_CONFIG_DATA);
+ }
- /* 0xE2_1-0: Parallel Port Mode / Enable */
- outb (0xE2, 0x3F0);
- tmp = inb (0x3F1);
+ /* Parallel Port I/O Base Address, bits 9-2 */
+ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+ port1 = inb(VIA_CONFIG_DATA) << 2;
- if ((tmp & 0x03) == 0x03) {
- printk (KERN_INFO "parport_pc: Via 686A parallel port disabled in BIOS\n");
+ printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
+ if ((port1 == 0x3BC) && have_epp)
+ {
+ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+ outb((0x378 >> 2), VIA_CONFIG_DATA);
+ printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
+ port1 = 0x378;
+ }
+
+ /*
+ * lock super i/o configuration
+ */
+ pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+ tmp &= ~via->via_pci_superio_config_data;
+ pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+ if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) {
+ printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
return 0;
}
- /* 0xE6: Parallel Port I/O Base Address, bits 9-2 */
- outb (0xE6, 0x3F0);
- port1 = inb (0x3F1) << 2;
-
+ /* Bits 7-4: PnP Routing for Parallel Port IRQ */
+ pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
+ irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
+
+ if (siofunc == VIA_FUNCTION_PARPORT_ECP)
+ {
+ /* Bits 3-2: PnP Routing for Parallel Port DMA */
+ pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+ dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+ }
+ else
+ /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
+ dma = PARPORT_DMA_NONE;
+
+ /* Let the user (or defaults) steer us away from interrupts and DMA */
+ if (autoirq == PARPORT_IRQ_NONE) {
+ irq = PARPORT_IRQ_NONE;
+ dma = PARPORT_DMA_NONE;
+ }
+ if (autodma == PARPORT_DMA_NONE)
+ dma = PARPORT_DMA_NONE;
+
switch (port1) {
case 0x3bc: port2 = 0x7bc; break;
case 0x378: port2 = 0x778; break;
case 0x278: port2 = 0x678; break;
default:
- printk (KERN_INFO "parport_pc: Weird Via 686A parport base 0x%X, ignoring\n",
+ printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
port1);
return 0;
}
- /* 0xF0_5: EPP+ECP enable */
- outb (0xF0, 0x3F0);
- have_eppecp = (inb (0x3F1) & (1 << 5));
-
- /*
- * lock super i/o configuration, clear 0x85_1
- */
- pci_read_config_byte (pdev, 0x85, &tmp);
- tmp &= ~(1 << 1);
- pci_write_config_byte (pdev, 0x85, tmp);
-
- /*
- * Get DMA and IRQ from PCI->ISA bridge PCI config registers
- */
-
- /* 0x50_3-2: PnP Routing for Parallel Port DRQ */
- pci_read_config_byte (pdev, 0x50, &tmp);
- dma = ((tmp >> 2) & 0x03);
-
- /* 0x51_7-4: PnP Routing for Parallel Port IRQ */
- pci_read_config_byte (pdev, 0x51, &tmp);
- irq = ((tmp >> 4) & 0x0F);
-
/* filter bogus IRQs */
switch (irq) {
case 0:
break;
}
- /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
- if (!have_eppecp)
- dma = PARPORT_DMA_NONE;
-
- /* Let the user (or defaults) steer us away from interrupts and DMA */
- if (autoirq != PARPORT_IRQ_AUTO) {
- irq = PARPORT_IRQ_NONE;
- dma = PARPORT_DMA_NONE;
- }
- if (autodma != PARPORT_DMA_AUTO)
- dma = PARPORT_DMA_NONE;
-
/* finally, do the probe with values obtained */
if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) {
printk (KERN_INFO
- "parport_pc: Via 686A parallel port: io=0x%X", port1);
+ "parport_pc: VIA parallel port: io=0x%X", port1);
if (irq != PARPORT_IRQ_NONE)
printk (", irq=%d", irq);
if (dma != PARPORT_DMA_NONE)
return 1;
}
- printk (KERN_WARNING "parport_pc: Strange, can't probe Via 686A parallel port: io=0x%X, irq=%d, dma=%d\n",
+ printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
port1, irq, dma);
return 0;
}
enum parport_pc_sio_types {
sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */
+ sio_via_8231, /* Via VT8231 south bridge integrated Super IO */
sio_ite_8872,
last_sio
};
/* each element directly indexed from enum list, above */
static struct parport_pc_superio {
- int (*probe) (struct pci_dev *pdev, int autoirq, int autodma);
+ int (*probe) (struct pci_dev *pdev, int autoirq, int autodma, struct parport_pc_via_data *via);
+ struct parport_pc_via_data *via;
} parport_pc_superio_info[] __devinitdata = {
- { sio_via_686a_probe, },
- { sio_ite_8872_probe, },
+ { sio_via_probe, &via_686a_data, },
+ { sio_via_probe, &via_8231_data, },
+ { sio_ite_8872_probe, NULL, },
};
-
enum parport_pc_pci_cards {
siig_1p_10x = last_sio,
siig_2p_10x,
static struct pci_device_id parport_pc_pci_tbl[] = {
/* Super-IO onboard chips */
{ 0x1106, 0x0686, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_686a },
+ { 0x1106, 0x8231, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_8231 },
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_ite_8872 },
continue;
if (parport_pc_superio_info[id->driver_data].probe
- (pdev, autoirq, autodma)) {
+ (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
ret++;
}
}
/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
-static int __init __attribute__((unused))
+static int __devinit __attribute__((unused))
parport_pc_find_isa_ports (int autoirq, int autodma)
{
int count = 0;
count += parport_pc_find_nonpci_ports (autoirq, autodma);
r = pci_register_driver (&parport_pc_pci_driver);
- if (r >= 0) {
- pci_registered_parport = 1;
- count += r;
- }
+ if (r)
+ return r;
+ pci_registered_parport = 1;
+ count += 1;
return count;
}
PARPORT_DMA_NONE, PARPORT_DMA_NOFIFO);
}
+#ifdef CONFIG_PCI
+static int __init parport_init_mode_setup(char *str)
+{
+ printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+
+ if (!strcmp (str, "spp"))
+ parport_init_mode=1;
+ if (!strcmp (str, "ps2"))
+ parport_init_mode=2;
+ if (!strcmp (str, "epp"))
+ parport_init_mode=3;
+ if (!strcmp (str, "ecp"))
+ parport_init_mode=4;
+ if (!strcmp (str, "ecpepp"))
+ parport_init_mode=5;
+ return 1;
+}
+#endif
+
#ifdef MODULE
static const char *irq[PARPORT_PC_MAX_PORTS];
static const char *dma[PARPORT_PC_MAX_PORTS];
MODULE_PARM_DESC(io, "Base I/O address (SPP regs)");
-MODULE_PARM(io, "1-" __MODULE_STRING(PARPORT_PC_MAX_PORTS) "i");
+module_param_array(io, int, NULL, 0);
MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)");
-MODULE_PARM(io_hi, "1-" __MODULE_STRING(PARPORT_PC_MAX_PORTS) "i");
+module_param_array(io_hi, int, NULL, 0);
MODULE_PARM_DESC(irq, "IRQ line");
-MODULE_PARM(irq, "1-" __MODULE_STRING(PARPORT_PC_MAX_PORTS) "s");
+module_param_array(irq, charp, NULL, 0);
MODULE_PARM_DESC(dma, "DMA channel");
-MODULE_PARM(dma, "1-" __MODULE_STRING(PARPORT_PC_MAX_PORTS) "s");
+module_param_array(dma, charp, NULL, 0);
#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
(defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation");
-MODULE_PARM(verbose_probing, "i");
+module_param(verbose_probing, int, 0644);
+#endif
+#ifdef CONFIG_PCI
+static char *init_mode;
+MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+module_param(init_mode, charp, 0);
#endif
static int __init parse_parport_params(void)
unsigned int i;
int val;
+#ifdef CONFIG_PCI
+ if (init_mode)
+ parport_init_mode_setup(init_mode);
+#endif
+
for (i = 0; i < PARPORT_PC_MAX_PORTS && io[i]; i++) {
if (parport_parse_irq(irq[i], &val))
return 1;
}
__setup ("parport=", parport_setup);
+
+/*
+ * Acceptable parameters:
+ *
+ * parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
+ */
+#ifdef CONFIG_PCI
+__setup("parport_init_mode=",parport_init_mode_setup);
+#endif
#endif
/* "Parser" ends here */
git://git.onelab.eu / linux-2.6.git / blobdiff