#
-# PCMCIA bus subsystem configuration
-#
-# Right now the non-CardBus choices are not supported
-# by the integrated kernel driver.
+# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#
-menu "PCMCIA/CardBus support"
- depends on HOTPLUG
+menu "PCCARD (PCMCIA/CardBus) support"
-config PCMCIA
- tristate "PCMCIA/CardBus support"
+config PCCARD
+ tristate "PCCard (PCMCIA/CardBus) support"
+ select HOTPLUG
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
modems or hard drives often used with laptops computers. There are
- actually two varieties of these cards: the older 16 bit PCMCIA cards
- and the newer 32 bit CardBus cards. If you want to use CardBus
- cards, you need to say Y here and also to "CardBus support" below.
-
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). Please also read the PCMCIA-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+ actually two varieties of these cards: 16 bit PCMCIA and 32 bit
+ CardBus cards.
To compile this driver as modules, choose M here: the
- modules will be called pcmcia_core and ds.
+ module will be called pcmcia_core.
+
+if PCCARD
config PCMCIA_DEBUG
- bool "Enable PCMCIA debugging"
- depends on PCMCIA != n
+ bool "Enable PCCARD debugging"
help
Say Y here to enable PCMCIA subsystem debugging. You
will need to choose the debugging level either via the
The kernel command line options are:
pcmcia_core.pc_debug=N
- ds.pc_debug=N
+ pcmcia.pc_debug=N
sa11xx_core.pc_debug=N
The module option is called pc_debug=N
In all the above examples, N is the debugging verbosity
level.
-config YENTA
- tristate "CardBus yenta-compatible bridge support"
- depends on PCMCIA && PCI
+config PCMCIA
+ tristate "16-bit PCMCIA support"
+ select CRC32
+ default y
+ ---help---
+ This option enables support for 16-bit PCMCIA cards. Most older
+ PC-cards are such 16-bit PCMCIA cards, so unless you know you're
+ only using 32-bit CardBus cards, say Y or M here.
+
+ To use 16-bit PCMCIA cards, you will need supporting software in
+ most cases. (see the file <file:Documentation/Changes> for
+ location and details).
+
+ To compile this driver as modules, choose M here: the
+ module will be called pcmcia.
+
+ If unsure, say Y.
+
+config PCMCIA_LOAD_CIS
+ bool "Load CIS updates from userspace (EXPERIMENTAL)"
+ depends on PCMCIA && EXPERIMENTAL
+ select FW_LOADER
+ default y
+ help
+ Some PCMCIA cards require an updated Card Information Structure (CIS)
+ to be loaded from userspace to work correctly. If you say Y here,
+ and your userspace is arranged correctly, this will be loaded
+ automatically using the in-kernel firmware loader and the hotplug
+ subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
+
+ If unsure, say Y.
+
+config PCMCIA_IOCTL
+ bool "PCMCIA control ioctl (obsolete)"
+ depends on PCMCIA
+ default y
+ help
+ If you say Y here, the deprecated ioctl interface to the PCMCIA
+ subsystem will be built. It is needed by cardmgr and cardctl
+ (pcmcia-cs) to function properly.
+
+ You should use the new pcmciautils package instead (see
+ <file:Documentation/Changes> for location and details).
+
+ If unsure, say Y.
+
+config CARDBUS
+ bool "32-bit CardBus support"
+ depends on PCI
+ default y
---help---
CardBus is a bus mastering architecture for PC-cards, which allows
for 32 bit PC-cards (the original PCMCIA standard specifies only
a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
- This option enables support for CardBus PC Cards, as well as support
- for CardBus host bridges. Virtually all modern PCMCIA bridges are
- CardBus compatible. A "bridge" is the hardware inside your computer
- that PCMCIA cards are plugged into.
+ To use 32 bit PC-cards, you also need a CardBus compatible host
+ bridge. Virtually all modern PCMCIA bridges do this, and most of
+ them are "yenta-compatible", so say Y or M there, too.
+
+ If unsure, say Y.
+
+comment "PC-card bridges"
+
+config YENTA
+ tristate "CardBus yenta-compatible bridge support"
+ depends on PCI
+ select CARDBUS if !EMBEDDED
+ select PCCARD_NONSTATIC
+ ---help---
+ This option enables support for CardBus host bridges. Virtually
+ all modern PCMCIA bridges are CardBus compatible. A "bridge" is
+ the hardware inside your computer that PCMCIA cards are plugged
+ into.
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location).
+ To compile this driver as modules, choose M here: the
+ module will be called yenta_socket.
If unsure, say Y.
-config CARDBUS
- bool
+config YENTA_O2
+ default y
+ bool "Special initialization for O2Micro bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_RICOH
+ default y
+ bool "Special initialization for Ricoh bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_TI
+ default y
+ bool "Special initialization for TI and EnE bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_ENE_TUNE
+ default y
+ bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
+ depends on YENTA_TI && CARDBUS
+
+config YENTA_TOSHIBA
+ default y
+ bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
depends on YENTA
- default y if YENTA
config PD6729
tristate "Cirrus PD6729 compatible bridge support"
depends on PCMCIA && PCI
+ select PCCARD_NONSTATIC
help
This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
device, found in some older laptops and PCMCIA card readers.
config I82092
tristate "i82092 compatible bridge support"
depends on PCMCIA && PCI
+ select PCCARD_NONSTATIC
help
This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
found in some older laptops and more commonly in evaluation boards for the
config I82365
tristate "i82365 compatible bridge support"
depends on PCMCIA && ISA
+ select PCCARD_NONSTATIC
help
Say Y here to include support for ISA-bus PCMCIA host bridges that
are register compatible with the Intel i82365. These are found on
config TCIC
tristate "Databook TCIC host bridge support"
- depends on PCMCIA
+ depends on PCMCIA && ISA
+ select PCCARD_NONSTATIC
help
Say Y here to include support for the Databook TCIC family of PCMCIA
host bridges. These are only found on a handful of old systems.
"Bridge" is the name used for the hardware inside your computer that
PCMCIA cards are plugged into. If unsure, say N.
+config PCMCIA_M8XX
+ tristate "MPC8xx PCMCIA support"
+ depends on PCMCIA && PPC && 8xx
+ select PCCARD_IODYN
+ help
+ Say Y here to include support for PowerPC 8xx series PCMCIA
+ controller.
+
+ This driver is also available as a module called m8xx_pcmcia.
+
config HD64465_PCMCIA
tristate "HD64465 host bridge support"
depends on HD64465 && PCMCIA
+config PCMCIA_AU1X00
+ tristate "Au1x00 pcmcia support"
+ depends on SOC_AU1X00 && PCMCIA
+
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
help
Say Y here to include support for the PXA2xx PCMCIA controller
-
config PCMCIA_PROBE
bool
- default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
+ default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
-endmenu
+config M32R_PCC
+ bool "M32R PCMCIA I/F"
+ depends on M32R && CHIP_M32700 && PCMCIA
+ select PCCARD_NONSTATIC
+ help
+ Say Y here to use the M32R PCMCIA controller.
+
+config M32R_CFC
+ bool "M32R CF I/F Controller"
+ depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
+ select PCCARD_NONSTATIC
+ help
+ Say Y here to use the M32R CompactFlash controller.
+
+config M32R_CFC_NUM
+ int "M32R CF I/F number"
+ depends on M32R_CFC
+ default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
+ help
+ Set the number of M32R CF slots.
+
+config PCMCIA_VRC4171
+ tristate "NEC VRC4171 Card Controllers support"
+ depends on VRC4171 && PCMCIA
+
+config PCMCIA_VRC4173
+ tristate "NEC VRC4173 CARDU support"
+ depends on CPU_VR41XX && PCI && PCMCIA
+config OMAP_CF
+ tristate "OMAP CompactFlash Controller"
+ depends on PCMCIA && ARCH_OMAP16XX
+ help
+ Say Y here to support the CompactFlash controller on OMAP.
+ Note that this doesn't support "True IDE" mode.
+
+config PCCARD_NONSTATIC
+ tristate
+
+config PCCARD_IODYN
+ bool
+
+endif # PCCARD
+
+endmenu