#
-# PCMCIA bus subsystem configuration
-#
-# Right now the non-CardBus choices are not supported
-# by the integrated kernel driver.
+# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#
menu "PCCARD (PCMCIA/CardBus) support"
config PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
- select HOTPLUG
+ depends on HOTPLUG
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
modems or hard drives often used with laptops computers. There are
- actually two varieties of these cards: the older 16 bit PCMCIA cards
- and the newer 32 bit CardBus cards.
+ actually two varieties of these cards: 16 bit PCMCIA and 32 bit
+ CardBus cards.
To compile this driver as modules, choose M here: the
module will be called pcmcia_core.
+if PCCARD
+
config PCMCIA_DEBUG
bool "Enable PCCARD debugging"
- depends on PCCARD != n
help
Say Y here to enable PCMCIA subsystem debugging. You
will need to choose the debugging level either via the
The kernel command line options are:
pcmcia_core.pc_debug=N
- ds.pc_debug=N
+ pcmcia.pc_debug=N
sa11xx_core.pc_debug=N
The module option is called pc_debug=N
config PCMCIA
tristate "16-bit PCMCIA support"
- depends on PCCARD
+ select CRC32
default y
---help---
This option enables support for 16-bit PCMCIA cards. Most older
PC-cards are such 16-bit PCMCIA cards, so unless you know you're
only using 32-bit CardBus cards, say Y or M here.
- To use 16-bit PCMCIA cards, you will need supporting software from
- David Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). Please also read the PCMCIA-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+ To use 16-bit PCMCIA cards, you will need supporting software in
+ most cases. (see the file <file:Documentation/Changes> for
+ location and details).
To compile this driver as modules, choose M here: the
module will be called pcmcia.
If unsure, say Y.
+config PCMCIA_LOAD_CIS
+ bool "Load CIS updates from userspace (EXPERIMENTAL)"
+ depends on PCMCIA && EXPERIMENTAL
+ select FW_LOADER
+ default y
+ help
+ Some PCMCIA cards require an updated Card Information Structure (CIS)
+ to be loaded from userspace to work correctly. If you say Y here,
+ and your userspace is arranged correctly, this will be loaded
+ automatically using the in-kernel firmware loader and the hotplug
+ subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
+
+ If unsure, say Y.
+
+config PCMCIA_IOCTL
+ bool "PCMCIA control ioctl (obsolete)"
+ depends on PCMCIA
+ default y
+ help
+ If you say Y here, the deprecated ioctl interface to the PCMCIA
+ subsystem will be built. It is needed by cardmgr and cardctl
+ (pcmcia-cs) to function properly.
+
+ You should use the new pcmciautils package instead (see
+ <file:Documentation/Changes> for location and details).
+
+ If unsure, say Y.
+
config CARDBUS
bool "32-bit CardBus support"
- depends on PCCARD && PCI
+ depends on PCI
default y
---help---
CardBus is a bus mastering architecture for PC-cards, which allows
config YENTA
tristate "CardBus yenta-compatible bridge support"
- depends on PCCARD && PCI
-#fixme: remove dependendcy on CARDBUS
- depends on CARDBUS
+ depends on PCI
+ select CARDBUS if !EMBEDDED
select PCCARD_NONSTATIC
---help---
This option enables support for CardBus host bridges. Virtually
If unsure, say Y.
+config YENTA_O2
+ default y
+ bool "Special initialization for O2Micro bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_RICOH
+ default y
+ bool "Special initialization for Ricoh bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_TI
+ default y
+ bool "Special initialization for TI and EnE bridges" if EMBEDDED
+ depends on YENTA
+
+config YENTA_ENE_TUNE
+ default y
+ bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
+ depends on YENTA_TI && CARDBUS
+
+config YENTA_TOSHIBA
+ default y
+ bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
+ depends on YENTA
+
config PD6729
tristate "Cirrus PD6729 compatible bridge support"
depends on PCMCIA && PCI
config TCIC
tristate "Databook TCIC host bridge support"
- depends on PCMCIA
+ depends on PCMCIA && ISA
select PCCARD_NONSTATIC
help
Say Y here to include support for the Databook TCIC family of PCMCIA
"Bridge" is the name used for the hardware inside your computer that
PCMCIA cards are plugged into. If unsure, say N.
+config PCMCIA_M8XX
+ tristate "MPC8xx PCMCIA support"
+ depends on PCMCIA && PPC && 8xx
+ select PCCARD_IODYN
+ help
+ Say Y here to include support for PowerPC 8xx series PCMCIA
+ controller.
+
+ This driver is also available as a module called m8xx_pcmcia.
+
config HD64465_PCMCIA
tristate "HD64465 host bridge support"
depends on HD64465 && PCMCIA
config PCMCIA_PROBE
bool
- default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
+ default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
config M32R_PCC
bool "M32R PCMCIA I/F"
depends on M32R && CHIP_M32700 && PCMCIA
+ select PCCARD_NONSTATIC
help
Say Y here to use the M32R PCMCIA controller.
config M32R_CFC
bool "M32R CF I/F Controller"
- depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT)
+ depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
+ select PCCARD_NONSTATIC
help
Say Y here to use the M32R CompactFlash controller.
config M32R_CFC_NUM
int "M32R CF I/F number"
depends on M32R_CFC
- default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT
+ default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
help
Set the number of M32R CF slots.
config PCMCIA_VRC4171
tristate "NEC VRC4171 Card Controllers support"
- depends on VRC4171 && PCMCIA
+ depends on CPU_VR41XX && ISA && PCMCIA
config PCMCIA_VRC4173
tristate "NEC VRC4173 CARDU support"
depends on CPU_VR41XX && PCI && PCMCIA
+config OMAP_CF
+ tristate "OMAP CompactFlash Controller"
+ depends on PCMCIA && ARCH_OMAP16XX
+ help
+ Say Y here to support the CompactFlash controller on OMAP.
+ Note that this doesn't support "True IDE" mode.
+
+config AT91_CF
+ tristate "AT91 CompactFlash Controller"
+ depends on PCMCIA && ARCH_AT91RM9200
+ help
+ Say Y here to support the CompactFlash controller on AT91 chips.
+ Or choose M to compile the driver as a module named "at91_cf".
+
config PCCARD_NONSTATIC
tristate
- depends on PCCARD
+
+config PCCARD_IODYN
+ bool
+
+endif # PCCARD
endmenu