#include <linux/module.h>
#include <linux/init.h>
-#include <linux/config.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
-#include <linux/notifier.h>
#include <linux/spinlock.h>
+#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
+#include <asm/arch/pxa-regs.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
return 0;
}
-static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int lclk)
+static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int clk)
{
struct soc_pcmcia_timing timing;
int sock = skt->nr;
soc_common_pcmcia_get_timing(skt, &timing);
- pxa2xx_pcmcia_set_mcmem(sock, timing.mem, lclk);
- pxa2xx_pcmcia_set_mcatt(sock, timing.attr, lclk);
- pxa2xx_pcmcia_set_mcio(sock, timing.io, lclk);
+ pxa2xx_pcmcia_set_mcmem(sock, timing.mem, clk);
+ pxa2xx_pcmcia_set_mcatt(sock, timing.attr, clk);
+ pxa2xx_pcmcia_set_mcio(sock, timing.io, clk);
return 0;
}
static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
{
- unsigned int lclk = get_lclk_frequency_10khz();
- return pxa2xx_pcmcia_set_mcxx(skt, lclk);
+ unsigned int clk = get_memclk_frequency_10khz();
+ return pxa2xx_pcmcia_set_mcxx(skt, clk);
}
+#ifdef CONFIG_CPU_FREQ
+
+static int
+pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
+ unsigned long val,
+ struct cpufreq_freqs *freqs)
+{
+#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ if (freqs->new > freqs->old) {
+ debug(skt, 2, "new frequency %u.%uMHz > %u.%uMHz, "
+ "pre-updating\n",
+ freqs->new / 1000, (freqs->new / 100) % 10,
+ freqs->old / 1000, (freqs->old / 100) % 10);
+ pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+ }
+ break;
+
+ case CPUFREQ_POSTCHANGE:
+ if (freqs->new < freqs->old) {
+ debug(skt, 2, "new frequency %u.%uMHz < %u.%uMHz, "
+ "post-updating\n",
+ freqs->new / 1000, (freqs->new / 100) % 10,
+ freqs->old / 1000, (freqs->old / 100) % 10);
+ pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+ }
+ break;
+ }
+ return 0;
+}
+#endif
+
int pxa2xx_drv_pcmcia_probe(struct device *dev)
{
int ret;
first = ops->first;
nr = ops->nr;
- /* Setup GPIOs for PCMCIA/CF alternate function mode.
- *
- * It would be nice if set_GPIO_mode included support
- * for driving GPIO outputs to default high/low state
- * before programming GPIOs as outputs. Setting GPIO
- * outputs to default high/low state via GPSR/GPCR
- * before defining them as outputs should reduce
- * the possibility of glitching outputs during GPIO
- * setup. This of course assumes external terminators
- * are present to hold GPIOs in a defined state.
- *
- * In the meantime, setup default state of GPIO
- * outputs before we enable them as outputs.
- */
-
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) |
- GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) |
- GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD); /* REVISIT: s/b dependent on num sockets */
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
+#ifdef CONFIG_CPU_FREQ
+ ops->frequency_change = pxa2xx_pcmcia_frequency_change;
+#endif
ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr);
}
EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe);
-static int pxa2xx_drv_pcmcia_suspend(struct device *dev, u32 state, u32 level)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
+ struct pcmcia_low_level *ops = dev->platform_data;
+ int nr = ops ? ops->nr : 0;
-static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
+ MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
+
+ return pcmcia_socket_dev_resume(dev);
}
static struct device_driver pxa2xx_pcmcia_driver = {
.probe = pxa2xx_drv_pcmcia_probe,
.remove = soc_common_drv_pcmcia_remove,
- .suspend = pxa2xx_drv_pcmcia_suspend,
+ .suspend = pcmcia_socket_dev_suspend,
.resume = pxa2xx_drv_pcmcia_resume,
.name = "pxa2xx-pcmcia",
.bus = &platform_bus_type,
};
-#ifdef CONFIG_CPU_FREQ
-
-/*
- * When pxa2xx_pcmcia_notifier() decides that a MC{IO,MEM,ATT} adjustment (due
- * to a core clock frequency change) is needed, this routine establishes
- * new values consistent with the clock speed `clock'.
- */
-static void pxa2xx_pcmcia_update_mcxx(unsigned int clock)
-{
- struct soc_pcmcia_socket *skt;
-
- down(&soc_sockets_lock);
- list_for_each_entry(skt, &soc_sockets, node) {
- pxa2xx_pcmcia_set_mcxx(skt, clock);
- }
- up(&soc_sockets_lock);
-}
-
-/*
- * When changing the processor L clock frequency, it is necessary
- * to adjust the MCXX timings accordingly. We've recorded the timings
- * requested by Card Services, so this is just a matter of finding
- * out what our current speed is, and then recomputing the new MCXX
- * values.
- *
- * Returns: 0 on success, -1 on error
- */
-static int
-pxa2xx_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
-{
- struct cpufreq_freqs *freqs = data;
-
-#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
- switch (val) {
- case CPUFREQ_PRECHANGE:
- if (freqs->new > freqs->old) {
- debug( 2, "new frequency %u.%uMHz > %u.%uMHz, "
- "pre-updating\n",
- freqs->new / 1000, (freqs->new / 100) % 10,
- freqs->old / 1000, (freqs->old / 100) % 10);
- pxa2xx_pcmcia_update_mcxx(freqs->new);
- }
- break;
-
- case CPUFREQ_POSTCHANGE:
- if (freqs->new < freqs->old) {
- debug( 2, "new frequency %u.%uMHz < %u.%uMHz, "
- "post-updating\n",
- freqs->new / 1000, (freqs->new / 100) % 10,
- freqs->old / 1000, (freqs->old / 100) % 10);
- pxa2xx_pcmcia_update_mcxx(freqs->new);
- }
- break;
- }
-
- return 0;
-}
-
-static struct notifier_block pxa2xx_pcmcia_notifier_block = {
- .notifier_call = pxa2xx_pcmcia_notifier
-};
-
-static int __init pxa2xx_pcmcia_cpufreq_init(void)
-{
- int ret;
-
- ret = cpufreq_register_notifier(&pxa2xx_pcmcia_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
- if (ret < 0)
- printk(KERN_ERR "Unable to register CPU frequency change "
- "notifier for PCMCIA (%d)\n", ret);
- return ret;
-}
-
-static void __exit pxa2xx_pcmcia_cpufreq_exit(void)
-{
- cpufreq_unregister_notifier(&pxa2xx_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#else
-#define pxa2xx_pcmcia_cpufreq_init()
-#define pxa2xx_pcmcia_cpufreq_exit()
-#endif
-
static int __init pxa2xx_pcmcia_init(void)
{
- int ret = driver_register(&pxa2xx_pcmcia_driver);
- if (ret == 0)
- pxa2xx_pcmcia_cpufreq_init();
- return ret;
+ return driver_register(&pxa2xx_pcmcia_driver);
}
static void __exit pxa2xx_pcmcia_exit(void)
{
- pxa2xx_pcmcia_cpufreq_exit();
driver_unregister(&pxa2xx_pcmcia_driver);
}
-module_init(pxa2xx_pcmcia_init);
+fs_initcall(pxa2xx_pcmcia_init);
module_exit(pxa2xx_pcmcia_exit);
MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>");
git://git.onelab.eu / linux-2.6.git / blobdiff