#include <linux/module.h>
#include <linux/init.h>
-#include <linux/config.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
+#include <asm/arch/pxa-regs.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
}
#endif
-int pxa2xx_drv_pcmcia_probe(struct device *dev)
+int __pxa2xx_drv_pcmcia_probe(struct device *dev)
{
int ret;
struct pcmcia_low_level *ops;
first = ops->first;
nr = ops->nr;
- /* Setup GPIOs for PCMCIA/CF alternate function mode.
- *
- * It would be nice if set_GPIO_mode included support
- * for driving GPIO outputs to default high/low state
- * before programming GPIOs as outputs. Setting GPIO
- * outputs to default high/low state via GPSR/GPCR
- * before defining them as outputs should reduce
- * the possibility of glitching outputs during GPIO
- * setup. This of course assumes external terminators
- * are present to hold GPIOs in a defined state.
- *
- * In the meantime, setup default state of GPIO
- * outputs before we enable them as outputs.
- */
-
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) |
- GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) |
- GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD); /* REVISIT: s/b dependent on num sockets */
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
#ifdef CONFIG_CPU_FREQ
return ret;
}
-EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe);
+EXPORT_SYMBOL(__pxa2xx_drv_pcmcia_probe);
+
-static int pxa2xx_drv_pcmcia_suspend(struct device *dev, u32 state, u32 level)
+static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
+ return __pxa2xx_drv_pcmcia_probe(&dev->dev);
}
-static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level)
+static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
+ return soc_common_drv_pcmcia_remove(&dev->dev);
+}
+
+static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state)
+{
+ return pcmcia_socket_dev_suspend(&dev->dev, state);
+}
+
+static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
+{
+ struct pcmcia_low_level *ops = dev->dev.platform_data;
+ int nr = ops ? ops->nr : 0;
+
+ MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
+
+ return pcmcia_socket_dev_resume(&dev->dev);
}
-static struct device_driver pxa2xx_pcmcia_driver = {
+static struct platform_driver pxa2xx_pcmcia_driver = {
.probe = pxa2xx_drv_pcmcia_probe,
- .remove = soc_common_drv_pcmcia_remove,
+ .remove = pxa2xx_drv_pcmcia_remove,
.suspend = pxa2xx_drv_pcmcia_suspend,
.resume = pxa2xx_drv_pcmcia_resume,
- .name = "pxa2xx-pcmcia",
- .bus = &platform_bus_type,
+ .driver = {
+ .name = "pxa2xx-pcmcia",
+ },
};
static int __init pxa2xx_pcmcia_init(void)
{
- return driver_register(&pxa2xx_pcmcia_driver);
+ return platform_driver_register(&pxa2xx_pcmcia_driver);
}
static void __exit pxa2xx_pcmcia_exit(void)
{
- driver_unregister(&pxa2xx_pcmcia_driver);
+ platform_driver_unregister(&pxa2xx_pcmcia_driver);
}
-module_init(pxa2xx_pcmcia_init);
+fs_initcall(pxa2xx_pcmcia_init);
module_exit(pxa2xx_pcmcia_exit);
MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>");