can say Y here to force the SCSI driver to probe for multiple LUNs.
A SCSI device with multiple LUNs acts logically like multiple SCSI
devices. The vast majority of SCSI devices have only one LUN, and
- so most people can say N here and should in fact do so, because it
- is safer.
-
-config SCSI_REPORT_LUNS
- bool "Build with SCSI REPORT LUNS support"
- depends on SCSI
- default y
- help
- If you want support for SCSI REPORT LUNS, say Y here.
- The REPORT LUNS command is useful for devices (such as disk arrays)
- with large numbers of LUNs where the LUN values are not contiguous
- (sparse LUN). REPORT LUNS scanning is done only for SCSI-3 devices.
- Most users can safely answer N here.
+ so most people can say N here. The max_luns boot/module parameter
+ allows to override this setting.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
depends on DECSTATION && SCSI
config BLK_DEV_3W_XXXX_RAID
- tristate "3ware Hardware ATA-RAID support"
+ tristate "3ware 5/6/7/8xxx ATA-RAID support"
depends on PCI && SCSI
help
3ware is the only hardware ATA-Raid product in Linux to date.
Please read the comments at the top of
<file:drivers/scsi/3w-xxxx.c>.
+config SCSI_3W_9XXX
+ tristate "3ware 9xxx SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports the 9000 series 3ware SATA-RAID cards.
+
+ <http://www.amcc.com>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-9xxx.c>.
+
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
- depends on SCSI
+ depends on (ISA || EISA || PCI ) && SCSI
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !64BIT && SCSI && BROKEN
+ depends on !64BIT && SCSI && PCI
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on (ISA || EISA || PCI) && SCSI
+ depends on (ISA || EISA || PCI) && SCSI && BROKEN
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
To compile this driver as a module, choose M here: the
module will be called in2000.
-config SCSI_MEGARAID
- tristate "AMI MegaRAID support"
- depends on PCI && SCSI
- help
- This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
- and 467 SCSI host adapters.
-
- To compile this driver as a module, choose M here: the
- module will be called megaraid.
+source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_SATA
bool "Serial ATA (SATA) support"
If unsure, say N.
+config SCSI_SATA_NV
+ tristate "NVIDIA SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for NVIDIA Serial ATA.
+
+ If unsure, say N.
+
config SCSI_SATA_PROMISE
- tristate "Promise SATA support"
+ tristate "Promise SATA TX2/TX4 support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Promise Serial ATA TX2/TX4.
+
+ If unsure, say N.
+
+config SCSI_SATA_SX4
+ tristate "Promise SATA SX4 support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
- This option enables support for Promise Serial ATA.
+ This option enables support for Promise Serial ATA SX4.
If unsure, say N.
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI
+ depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and the files
<file:Documentation/scsi/BusLogic.txt> and
- <file:Documentation/scsi/FlashPoint.txt> for more information. If this
- driver does not work correctly without modification, please contact
- the author, Leonard N. Zubkoff, by email to lnz@dandelion.com.
+ <file:Documentation/scsi/FlashPoint.txt> for more information.
To compile this driver as a module, choose M here: the
module will be called BusLogic.
substantial, so users of MultiMaster Host Adapters may wish to omit
it.
+#
+# This is marked broken because it uses over 4kB of stack in
+# just two routines:
+# 2076 CpqTsProcessIMQEntry
+# 2052 PeekIMQEntry
+#
config SCSI_CPQFCTS
tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
Say Y here to compile in support for the Compaq StorageWorks Fibre
Channel 64-bit/66Mhz Host Bus Adapter.
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI
+ depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
config SCSI_EATA_PIO
tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
- depends on SCSI
+ depends on (ISA || EISA || PCI) && SCSI
---help---
This driver supports all EATA-PIO protocol compliant SCSI Host
Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
config SCSI_FD_MCS
tristate "Future Domain MCS-600/700 SCSI support"
- depends on MCA && SCSI
+ depends on MCA_LEGACY && SCSI
---help---
This is support for Future Domain MCS 600/700 MCA SCSI adapters.
Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on (ISA || EISA || PCI) && SCSI
+ depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
---help---
Formerly called GDT SCSI Disk Array Controller Support.
config SCSI_IBMMCA
tristate "IBMMCA SCSI support"
- depends on MCA && SCSI
+ depends on MCA_LEGACY && SCSI
---help---
This is support for the IBM SCSI adapter found in many of the PS/2
series computers. These machines have an MCA bus, so you need to
To compile this driver as a module, choose M here: the
module will be called ips.
+config SCSI_IBMVSCSI
+ tristate "IBM Virtual SCSI support"
+ depends on PPC_PSERIES || PPC_ISERIES
+ help
+ This is the IBM POWER Virtual SCSI Client
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvscsic.
+
config SCSI_INITIO
tristate "Initio 9100U(W) support"
depends on PCI && SCSI && BROKEN
the card. This is significantly slower then using memory
mapped IO. Most people should answer N.
+config SCSI_IPR
+ tristate "IBM Power Linux RAID adapter support"
+ depends on PCI && SCSI
+ select FW_LOADER
+ ---help---
+ This driver supports the IBM Power Linux family RAID adapters.
+ This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
+ as IBM iSeries 5702, 5703, 5709, and 570A.
+
+config SCSI_IPR_TRACE
+ bool "enable driver internal trace"
+ depends on SCSI_IPR
+ help
+ If you say Y here, the driver will trace all commands issued
+ to the adapter. Performance impact is minimal. Trace can be
+ dumped using /sys/bus/class/scsi_host/hostXX/trace.
+
+config SCSI_IPR_DUMP
+ bool "enable adapter dump support"
+ depends on SCSI_IPR
+ help
+ If you say Y here, the driver will support adapter crash dump.
+ If you enable this support, the iprdump daemon can be used
+ to capture adapter failure analysis information.
+
config SCSI_ZALON
tristate "Zalon SCSI support"
depends on GSC && SCSI
config SCSI_MCA_53C9X
tristate "NCR MCA 53C9x SCSI support"
- depends on MCA && SCSI && BROKEN_ON_SMP
+ depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
help
Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
controller based on the NCR 53C94. This driver will allow use of
config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
- depends on PPC_PMAC && SCSI
+ depends on PPC32 && PPC_PMAC && SCSI
help
Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
config JAZZ_ESP
bool "MIPS JAZZ FAS216 SCSI support"
- depends on MIPS_JAZZ && SCSI
+ depends on MACH_JAZZ && SCSI
help
This is the driver for the onboard SCSI host adapter of MIPS Magnum
4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
To compile this driver as a module, choose M here: the
module will be called esp.
-config SCSI_PC980155
- tristate "NEC PC-9801-55 SCSI support"
- depends on X86_PC9800 && SCSI
- help
- If you have the NEC PC-9801-55 SCSI interface card or compatibles
- for NEC PC-9801/PC-9821, say Y.
-
-config WD33C93_PIO
- bool
- depends on SCSI_PC980155
- default y
-
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
config ZFCP
- tristate "IBM z900 OpenFCP/SCSI support"
+ tristate "FCP host bus adapter driver for IBM eServer zSeries"
depends on ARCH_S390 && SCSI
+ select SCSI_FC_ATTRS
+ help
+ If you want to access SCSI devices attached to your IBM eServer
+ zSeries by means of Fibre Channel interfaces say Y.
+ For details please refer to the documentation provided by IBM at
+ <http://oss.software.ibm.com/developerworks/opensource/linux390>
+
+ This driver is also available as a module. This module will be
+ called zfcp. If you want to compile it as a module, say M here
+ and read Documentation/modules.txt.
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff