menu "SCSI device support"
+config RAID_ATTRS
+ tristate "RAID Transport Class"
+ default n
+ ---help---
+ Provides RAID
+
config SCSI
tristate "SCSI device support"
---help---
If unsure, say N.
+config CHR_DEV_SCH
+ tristate "SCSI media changer support"
+ depends on SCSI
+ ---help---
+ This is a driver for SCSI media changers. Most common devices are
+ tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
+ don't need this for those tiny 6-slot cdrom changers. Media
+ changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
+ If you have such hardware and want to use it with linux, say Y
+ here. Check <file:Documentation/scsi-changer.txt> for details.
+
+ If you want to compile this as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt> and
+ <file:Documentation/scsi.txt>. The module will be called ch.o.
+ If unsure, say N.
+
+
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
each attached FiberChannel device to sysfs, say Y.
Otherwise, say N.
+config SCSI_ISCSI_ATTRS
+ tristate "iSCSI Transport Attributes"
+ depends on SCSI && NET
+ help
+ If you wish to export transport-specific information about
+ each attached iSCSI device to sysfs, say Y.
+ Otherwise, say N.
+
+config SCSI_SAS_ATTRS
+ tristate "SAS Transport Attributes"
+ depends on SCSI
+ help
+ If you wish to export transport-specific information about
+ each attached SAS device to sysfs, say Y.
+
endmenu
menu "SCSI low-level drivers"
depends on SCSI!=n
+config ISCSI_TCP
+ tristate "iSCSI Initiator over TCP/IP"
+ depends on SCSI && INET
+ select CRYPTO
+ select CRYPTO_MD5
+ select CRYPTO_CRC32C
+ select SCSI_ISCSI_ATTRS
+ help
+ The iSCSI Driver provides a host with the ability to access storage
+ through an IP network. The driver uses the iSCSI protocol to transport
+ SCSI requests and responses over a TCP/IP network between the host
+ (the "initiator") and "targets". Architecturally, the iSCSI driver
+ combines with the host's TCP/IP stack, network drivers, and Network
+ Interface Card (NIC) to provide the same functions as a SCSI or a
+ Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
+
+ To compile this driver as a module, choose M here: the
+ module will be called iscsi_tcp.
+
+ The userspace component needed to initialize the driver, documentation,
+ and sample configuration files can be found here:
+
+ http://linux-iscsi.sf.net
+
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
depends on SGI_IP22 && SCSI
config SCSI_DECNCR
tristate "DEC NCR53C94 Scsi Driver"
- depends on DECSTATION && TC && SCSI
+ depends on MACH_DECSTATION && SCSI && TC
help
Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
config SCSI_DECSII
tristate "DEC SII Scsi Driver"
- depends on DECSTATION && SCSI
+ depends on MACH_DECSTATION && SCSI && 32BIT
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
config SCSI_7000FASST
tristate "7000FASST SCSI support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && ISA_DMA_API
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
tristate "ACARD SCSI support"
depends on PCI && SCSI
help
- This driver supports the ACARD 870U/W SCSI host adapter.
-
+ This driver supports the ACARD SCSI host adapter.
+ Support Chip <ATP870 ATP876 ATP880 ATP885>
To compile this driver as a module, choose M here: the
module will be called atp870u.
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
+ select SCSI_SPI_ATTRS
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
module will be called aha1740.
config SCSI_AACRAID
- tristate "Adaptec AACRAID support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SCSI && PCI
+ tristate "Adaptec AACRAID support"
+ depends on SCSI && PCI
+ help
+ This driver supports a variety of Dell, HP, Adaptec, IBM and
+ ICP storage products. For a list of supported products, refer
+ to <file:Documentation/scsi/aacraid.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called aacraid.
+
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
- depends on SCSI
+ depends on (ISA || EISA || PCI ) && SCSI
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on (ISA || EISA || PCI) && SCSI && BROKEN
+ depends on SCSI
+ depends on ISA || EISA || PCI
+ depends on BROKEN || X86_32
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
To compile this driver as a module, choose M here: the
module will be called in2000.
-config SCSI_MEGARAID
- tristate "AMI MegaRAID support"
- depends on PCI && SCSI
- help
- This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
- and 467 SCSI host adapters.
-
- To compile this driver as a module, choose M here: the
- module will be called megaraid.
+source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_SATA
- bool "Serial ATA (SATA) support"
- depends on SCSI && EXPERIMENTAL
+ tristate "Serial ATA (SATA) support"
+ depends on SCSI
help
This driver family supports Serial ATA host controllers
and devices.
If unsure, say N.
+config SCSI_SATA_AHCI
+ tristate "AHCI SATA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for AHCI Serial ATA.
+
+ If unsure, say N.
+
config SCSI_SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on SCSI_SATA && PCI
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
If unsure, say N.
+config SCSI_SATA_MV
+ tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for the Marvell Serial ATA family.
+ Currently supports 88SX[56]0[48][01] chips.
+
+ If unsure, say N.
+
config SCSI_SATA_NV
tristate "NVIDIA SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
If unsure, say N.
+config SCSI_PDC_ADMA
+ tristate "Pacific Digital ADMA support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Pacific Digital ADMA controllers
+
+ If unsure, say N.
+
+config SCSI_SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
config SCSI_SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on SCSI_SATA && PCI
If unsure, say N.
+config SCSI_SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
+
+ If unsure, say N.
+
config SCSI_SATA_SIS
tristate "SiS 964/180 SATA support"
- depends on SCSI_SATA && PCI
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for SiS Serial ATA 964/180.
If unsure, say N.
+config SCSI_SATA_ULI
+ tristate "ULi Electronics SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for ULi Electronics SATA.
+
+ If unsure, say N.
+
config SCSI_SATA_VIA
tristate "VIA SATA support"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
+ depends on SCSI_SATA && PCI
help
This option enables support for VIA Serial ATA.
If unsure, say N.
config SCSI_SATA_VITESSE
- tristate "VITESSE VSC-7174 SATA support"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
+ tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
+ depends on SCSI_SATA && PCI
help
- This option enables support for Vitesse VSC7174 Serial ATA.
+ This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
If unsure, say N.
+config SCSI_SATA_INTEL_COMBINED
+ bool
+ depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
+ default y
+
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
+ depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
substantial, so users of MultiMaster Host Adapters may wish to omit
it.
-#
-# This is marked broken because it uses over 4kB of stack in
-# just two routines:
-# 2076 CpqTsProcessIMQEntry
-# 2052 PeekIMQEntry
-#
-config SCSI_CPQFCTS
- tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
- depends on PCI && SCSI && BROKEN
- help
- Say Y here to compile in support for the Compaq StorageWorks Fibre
- Channel 64-bit/66Mhz Host Bus Adapter.
-
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
help
This is support for Domex DMX3191D SCSI Host Adapters.
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+ depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
config SCSI_EATA_PIO
tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
- depends on SCSI
+ depends on (ISA || EISA || PCI) && SCSI && BROKEN
---help---
This driver supports all EATA-PIO protocol compliant SCSI Host
Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+ depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
---help---
Formerly called GDT SCSI Disk Array Controller Support.
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using PIO. Most boards such as the Trantor T130 fit this
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using memory mapped I/O.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
for more information. If this driver does not work correctly
without modification please contact the author by email at
- ipslinux@adaptec.com.
+ <ipslinux@adaptec.com>.
To compile this driver as a module, choose M here: the
module will be called ips.
+config SCSI_IBMVSCSI
+ tristate "IBM Virtual SCSI support"
+ depends on PPC_PSERIES || PPC_ISERIES
+ help
+ This is the IBM POWER Virtual SCSI Client
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvscsic.
+
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI && BROKEN
+ depends on PCI && SCSI
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
- depends on SCSI && PARPORT
+ depends on SCSI && PARPORT_PC
---help---
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
- depends on SCSI && PARPORT
+ depends on SCSI && PARPORT_PC
---help---
This driver supports newer versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
config SCSI_IZIP_EPP16
bool "ppa/imm option - Use slow (but safe) EPP-16"
- depends on PARPORT && (SCSI_PPA || SCSI_IMM)
+ depends on SCSI_PPA || SCSI_IMM
---help---
EPP (Enhanced Parallel Port) is a standard for parallel ports which
allows them to act as expansion buses that can handle up to 64
config SCSI_IZIP_SLOW_CTR
bool "ppa/imm option - Assume slow parport control register"
- depends on PARPORT && (SCSI_PPA || SCSI_IMM)
+ depends on SCSI_PPA || SCSI_IMM
help
Some parallel ports are known to have excessive delays between
changing the parallel port control register and good data being
Unless you have an NCR manufactured machine, the chances are that
you do not have this SCSI card, so say N.
-config 53C700_IO_MAPPED
- bool
- depends on SCSI_NCR_D700
- default y
-
config SCSI_LASI700
tristate "HP Lasi SCSI support for 53c700/710"
depends on GSC && SCSI
many PA-RISC workstations & servers. If you do not know whether you
have a Lasi chip, it is safe to say "Y" here.
-config 53C700_MEM_MAPPED
- bool
- depends on SCSI_LASI700
- default y
-
config 53C700_LE_ON_BE
bool
depends on SCSI_LASI700
memory using PCI DAC cycles.
config SCSI_SYM53C8XX_DEFAULT_TAGS
- int "default tagged command queue depth"
+ int "Default tagged command queue depth"
depends on SCSI_SYM53C8XX_2
default "16"
help
exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
config SCSI_SYM53C8XX_MAX_TAGS
- int "maximum number of queued commands"
+ int "Maximum number of queued commands"
depends on SCSI_SYM53C8XX_2
default "64"
help
possible. The driver supports up to 256 queued commands per device.
This value is used as a compiled-in hard limit.
-config SCSI_SYM53C8XX_IOMAPPED
- bool "use port IO"
+config SCSI_SYM53C8XX_MMIO
+ bool "Use memory mapped IO"
depends on SCSI_SYM53C8XX_2
+ default y
help
- If you say Y here, the driver will use port IO to access
- the card. This is significantly slower then using memory
- mapped IO. Most people should answer N.
+ Memory mapped IO is faster than Port IO. Most people should
+ answer Y here, but some machines may have problems. If you have
+ to answer N here, please report the problem to the maintainer.
config SCSI_IPR
tristate "IBM Power Linux RAID adapter support"
config SCSI_ZALON
tristate "Zalon SCSI support"
depends on GSC && SCSI
+ select SCSI_SPI_ATTRS
help
The Zalon is a GSC/HSC bus interface chip that sits between the
PA-RISC processor and the NCR 53c720 SCSI controller on C100,
config SCSI_NCR_Q720
tristate "NCR Quad 720 MCA SCSI support"
depends on MCA && SCSI
+ select SCSI_SPI_ATTRS
help
This is a driver for the MicroChannel Quad 720 card produced by
NCR and commonly used in 345x/35xx/4100 class machines. It always
config SCSI_PAS16
tristate "PAS16 SCSI support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
3.10 of the SCSI-HOWTO, available from
To compile this driver as a module, choose M here: the
module will be called pas16.
-config SCSI_PCI2000
- tristate "PCI2000 support"
- depends on PCI && SCSI && BROKEN
- help
- This is support for the PCI2000I EIDE interface card which acts as a
- SCSI host adapter. Please read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called pci2000.
-
-config SCSI_PCI2220I
- tristate "PCI2220i support"
- depends on PCI && SCSI && BROKEN
- help
- This is support for the PCI2220i EIDE interface card which acts as a
- SCSI host adapter. Please read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called pci2220i.
-
config SCSI_PSI240I
tristate "PSI240i support"
depends on ISA && SCSI
To compile this driver as a module, choose M here: the
module will be called qlogicfas.
-config SCSI_QLOGIC_ISP
- tristate "Qlogic ISP SCSI support"
- depends on PCI && SCSI
- ---help---
- This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
- IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter
- card is supported by the "AM53/79C974 PCI SCSI" driver.)
-
- If you say Y here, make sure to choose "BIOS" at the question "PCI
- access mode".
-
- Please read the file <file:Documentation/scsi/qlogicisp.txt>. You
- should also read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called qlogicisp.
-
-config SCSI_QLOGIC_FC
- tristate "Qlogic ISP FC SCSI support"
- depends on PCI && SCSI
- help
- This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called qlogicfc.
-
config SCSI_QLOGIC_FC_FIRMWARE
bool "Include loadable firmware in driver"
depends on SCSI_QLOGIC_FC
qlogicfc driver. This is required on some platforms.
config SCSI_QLOGIC_1280
- tristate "Qlogic QLA 1280 SCSI support"
+ tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
depends on PCI && SCSI
help
- Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter.
+ Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
To compile this driver as a module, choose M here: the
module will be called qla1280.
source "drivers/scsi/qla2xxx/Kconfig"
+config SCSI_LPFC
+ tristate "Emulex LightPulse Fibre Channel Support"
+ depends on PCI && SCSI
+ select SCSI_FC_ATTRS
+ help
+ This lpfc driver supports the Emulex LightPulse
+ Family of Fibre Channel PCI host adapters.
+
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
depends on X86 && ISA && SCSI && BROKEN
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
host adapter with one dummy SCSI disk. Each dummy disk uses kernel
RAM as storage (i.e. it is a ramdisk). To save space when multiple
dummy disks are simulated, they share the same kernel RAM for
- their storage. See http://www.torque.net/sg/sdebug.html for more
+ their storage. See <http://www.torque.net/sg/sdebug.html> for more
information. This driver is primarily of use to those testing the
SCSI and block subsystems. If unsure, say N.
config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
- depends on PPC_PMAC && SCSI
+ depends on PPC32 && PPC_PMAC && SCSI
help
Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
config SCSI_MAC53C94
tristate "53C94 (Power Mac external SCSI) support"
- depends on PPC_PMAC && SCSI
+ depends on PPC32 && PPC_PMAC && SCSI
help
On Power Macintoshes (and clones) with two SCSI buses, the external
SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
config JAZZ_ESP
bool "MIPS JAZZ FAS216 SCSI support"
- depends on MIPS_JAZZ && SCSI
+ depends on MACH_JAZZ && SCSI
help
This is the driver for the onboard SCSI host adapter of MIPS Magnum
4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
- depends on MAC && SCSI
+ depends on MAC && SCSI=y
+ select SCSI_SPI_ATTRS
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
- depends on MVME147 && SCSI
+ depends on MVME147 && SCSI=y
+ select SCSI_SPI_ATTRS
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
config MVME16x_SCSI
bool "NCR53C710 SCSI driver for MVME16x"
depends on MVME16x && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
config BVME6000_SCSI
bool "NCR53C710 SCSI driver for BVME6000"
depends on BVME6000 && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
- depends on SUN3 && SCSI
+ depends on SUN3 && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
config SUN3X_ESP
bool "Sun3x ESP SCSI"
- depends on SUN3X && SCSI
+ depends on SUN3X && SCSI=y
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
- depends on ARCH_S390 && SCSI
+ depends on S390 && QDIO && SCSI
select SCSI_FC_ATTRS
help
If you want to access SCSI devices attached to your IBM eServer
This driver is also available as a module. This module will be
called zfcp. If you want to compile it as a module, say M here
- and read Documentation/modules.txt.
+ and read <file:Documentation/modules.txt>.
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff