tristate "ACARD SCSI support"
depends on PCI && SCSI
help
- This driver supports the ACARD SCSI host adapter.
- Support Chip <ATP870 ATP876 ATP880 ATP885>
+ This driver supports the ACARD 870U/W SCSI host adapter.
+
To compile this driver as a module, choose M here: the
module will be called atp870u.
module will be called aha1740.
config SCSI_AACRAID
- tristate "Adaptec AACRAID support"
- depends on SCSI && PCI
+ tristate "Adaptec AACRAID support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && SCSI && PCI
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on (ISA || EISA || PCI) && SCSI
+ depends on (ISA || EISA || PCI) && SCSI && BROKEN
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
config SCSI_SATA
bool "Serial ATA (SATA) support"
- depends on SCSI
+ depends on SCSI && EXPERIMENTAL
help
This driver family supports Serial ATA host controllers
and devices.
config SCSI_SATA_AHCI
tristate "AHCI SATA support"
- depends on SCSI_SATA && PCI
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for AHCI Serial ATA.
If unsure, say N.
config SCSI_SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support"
- depends on SCSI_SATA && PCI
+ tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
config SCSI_SATA_SIS
tristate "SiS 964/180 SATA support"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
+ depends on SCSI_SATA && PCI
help
This option enables support for SiS Serial ATA 964/180.
If unsure, say N.
-config SCSI_SATA_ULI
- tristate "ULi Electronics SATA support"
- depends on SCSI_SATA && PCI && EXPERIMENTAL
- help
- This option enables support for ULi Electronics SATA.
-
- If unsure, say N.
-
config SCSI_SATA_VIA
tristate "VIA SATA support"
- depends on SCSI_SATA && PCI
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for VIA Serial ATA.
config SCSI_SATA_VITESSE
tristate "VITESSE VSC-7174 SATA support"
- depends on SCSI_SATA && PCI
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for Vitesse VSC7174 Serial ATA.
To compile this driver as a module, choose M here: the
module will be called eata_pio.
+config SCSI_LPFC
+ tristate "Emulex LightPulse Fibre Channel Support"
+ depends on PCI && SCSI
+ help
+ This lpfc driver supports the Emulex LightPulse
+ family of Fibre Channel PCI host adapters.
+
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
config SCSI_ZALON
tristate "Zalon SCSI support"
depends on GSC && SCSI
- select SCSI_SPI_ATTRS
help
The Zalon is a GSC/HSC bus interface chip that sits between the
PA-RISC processor and the NCR 53c720 SCSI controller on C100,
config SCSI_NCR_Q720
tristate "NCR Quad 720 MCA SCSI support"
depends on MCA && SCSI
- select SCSI_SPI_ATTRS
help
This is a driver for the MicroChannel Quad 720 card produced by
NCR and commonly used in 345x/35xx/4100 class machines. It always
module will be called qlogicfas.
config SCSI_QLOGIC_ISP
- tristate "Qlogic ISP SCSI support (old driver)"
+ tristate "Qlogic ISP SCSI support"
depends on PCI && SCSI
---help---
This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
To compile this driver as a module, choose M here: the
module will be called qlogicisp.
- These days the hardware is also supported by the more modern qla1280
- driver. In doubt use that one instead of qlogicisp.
-
config SCSI_QLOGIC_FC
tristate "Qlogic ISP FC SCSI support"
depends on PCI && SCSI
qlogicfc driver. This is required on some platforms.
config SCSI_QLOGIC_1280
- tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
+ tristate "Qlogic QLA 1280 SCSI support"
depends on PCI && SCSI
help
- Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
+ Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter.
To compile this driver as a module, choose M here: the
module will be called qla1280.
-config SCSI_QLOGIC_1280_1040
- bool "Qlogic QLA 1020/1040 SCSI support"
- depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y
- help
- Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and
- do not want to use the old driver. This option enables support in
- the qla1280 driver for those host adapters.
-
config SCSI_QLOGICPTI
tristate "PTI Qlogic, ISP Driver"
depends on SBUS && SCSI
config SCSI_MAC53C94
tristate "53C94 (Power Mac external SCSI) support"
- depends on PPC32 && PPC_PMAC && SCSI
+ depends on PPC_PMAC && SCSI
help
On Power Macintoshes (and clones) with two SCSI buses, the external
SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
- depends on ARCH_S390 && QDIO && SCSI
+ depends on ARCH_S390 && SCSI
select SCSI_FC_ATTRS
help
If you want to access SCSI devices attached to your IBM eServer