#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/list.h>
+#include <linux/vmalloc.h>
#include <asm/io.h>
#include <scsi/scsi.h>
* total_xfer_length in xferred. These values are restored in
* pci_unmap_srb_sense. This is the only place xferred is used.
*/
+ unsigned char *virt_addr_req; /* Saved virtual address of the request buffer */
u32 xferred; /* Saved copy of total_xfer_length */
u16 state;
struct AdapterCtlBlk {
struct Scsi_Host *scsi_host;
- u16 io_port_base;
- u16 io_port_len;
+ unsigned long io_port_base;
+ unsigned long io_port_len;
struct list_head dcb_list; /* head of going dcb list */
struct DeviceCtlBlk *dcb_run_robin;
u8 sel_timeout;
- u8 irq_level;
+ unsigned int irq_level;
u8 tag_max_num;
u8 acb_flag;
u8 gmode2;
int def; /* default value */
int safe; /* safe value */
};
-static struct ParameterData __initdata cfg_data[] = {
+static struct ParameterData __devinitdata cfg_data[] = {
{ /* adapter id */
CFG_PARAM_UNSET,
0,
* set_safe_settings - if the use_safe_settings option is set then
* set all values to the safe and slow values.
**/
-static void __init set_safe_settings(void)
+static void __devinit set_safe_settings(void)
{
if (use_safe_settings)
{
* fix_settings - reset any boot parameters which are out of range
* back to the default values.
**/
-static void __init fix_settings(void)
+static void __devinit fix_settings(void)
{
int i;
* Mapping from the eeprom delay index value (index into this array)
* to the the number of actual seconds that the delay should be for.
*/
-static char __initdata eeprom_index_to_delay_map[] =
+static char __devinitdata eeprom_index_to_delay_map[] =
{ 1, 3, 5, 10, 16, 30, 60, 120 };
*
* @eeprom: The eeprom structure in which we find the delay index to map.
**/
-static void __init eeprom_index_to_delay(struct NvRamType *eeprom)
+static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
{
eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
}
*
* @delay: The delay, in seconds, to find the eeprom index for.
**/
-static int __init delay_to_eeprom_index(int delay)
+static int __devinit delay_to_eeprom_index(int delay)
{
u8 idx = 0;
while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
*
* @eeprom: The eeprom data to override with command line options.
**/
-static void __init eeprom_override(struct NvRamType *eeprom)
+static void __devinit eeprom_override(struct NvRamType *eeprom)
{
u8 id;
/* Find cmd in SRB list */
-inline static struct ScsiReqBlk *find_cmd(struct scsi_cmnd *cmd,
+static inline struct ScsiReqBlk *find_cmd(struct scsi_cmnd *cmd,
struct list_head *head)
{
struct ScsiReqBlk *i;
}
}
+static inline void pio_trigger(void)
+{
+ static int feedback_requested;
+
+ if (!feedback_requested) {
+ feedback_requested = 1;
+ printk(KERN_WARNING "%s: Please, contact <linux-scsi@vger.kernel.org> "
+ "to help improve support for your system.\n", __FILE__);
+ }
+}
/* Prepare SRB for being sent to Device DCB w/ command *cmd */
static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
* @cmd - some command for this host (for fetching hooks)
* Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
*/
-static int dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
+static int __dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
{
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
return SUCCESS;
}
+static int dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
+{
+ int rc;
+
+ spin_lock_irq(cmd->device->host->host_lock);
+ rc = __dc395x_eh_bus_reset(cmd);
+ spin_unlock_irq(cmd->device->host->host_lock);
+
+ return rc;
+}
/*
* abort an errant SCSI command
sg_verify_length(srb);
/* we need the corresponding virtual address */
- if (!segment) {
+ if (!segment || (srb->flag & AUTO_REQSENSE)) {
srb->virt_addr += xferred;
return;
}
CFG2_WIDEFIFO);
while (DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) != 0x40) {
u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
+ pio_trigger();
*(srb->virt_addr)++ = byte;
if (debug_enabled(DBG_PIO))
printk(" %02x", byte);
/* Read the last byte ... */
if (srb->total_xfer_length > 0) {
u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
+ pio_trigger();
*(srb->virt_addr)++ = byte;
srb->total_xfer_length--;
if (debug_enabled(DBG_PIO))
if (debug_enabled(DBG_PIO))
printk(" %02x", (unsigned char) *(srb->virt_addr));
+ pio_trigger();
DC395x_write8(acb, TRM_S1040_SCSI_FIFO,
*(srb->virt_addr)++);
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
srb->segment_x[0].length =
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length;
+ srb->virt_addr = srb->virt_addr_req;
}
srb->xferred = srb->total_xfer_length;
/* srb->segment_x : a one entry of S/G list table */
srb->total_xfer_length = sizeof(cmd->sense_buffer);
+ srb->virt_addr_req = srb->virt_addr;
+ srb->virt_addr = cmd->sense_buffer;
srb->segment_x[0].length = sizeof(cmd->sense_buffer);
/* Map sense buffer */
srb->segment_x[0].address =
*
* @io_port: base I/O address
**/
-static void __init trms1040_wait_30us(u16 io_port)
+static void __devinit trms1040_wait_30us(unsigned long io_port)
{
/* ScsiPortStallExecution(30); wait 30 us */
outb(5, io_port + TRM_S1040_GEN_TIMER);
* @cmd: SB + op code (command) to send
* @addr: address to send
**/
-static void __init trms1040_write_cmd(u16 io_port, u8 cmd, u8 addr)
+static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
{
int i;
u8 send_data;
* @addr: offset into EEPROM
* @byte: bytes to write
**/
-static void __init trms1040_set_data(u16 io_port, u8 addr, u8 byte)
+static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
{
int i;
u8 send_data;
* @eeprom: the data to write
* @io_port: the base io port
**/
-static void __init trms1040_write_all(struct NvRamType *eeprom, u16 io_port)
+static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
{
u8 *b_eeprom = (u8 *)eeprom;
u8 addr;
*
* Returns the the byte read.
**/
-static u8 __init trms1040_get_data(u16 io_port, u8 addr)
+static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
{
int i;
u8 read_byte;
* @eeprom: where to store the data
* @io_port: the base io port
**/
-static void __init trms1040_read_all(struct NvRamType *eeprom, u16 io_port)
+static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
{
u8 *b_eeprom = (u8 *)eeprom;
u8 addr;
* @eeprom: caller allocated strcuture to read the eeprom data into
* @io_port: io port to read from
**/
-static void __init check_eeprom(struct NvRamType *eeprom, u16 io_port)
+static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
{
u16 *w_eeprom = (u16 *)eeprom;
u16 w_addr;
*
* @eeprom: The eeprom data strucutre to show details for.
**/
-static void __init print_eeprom_settings(struct NvRamType *eeprom)
+static void __devinit print_eeprom_settings(struct NvRamType *eeprom)
{
dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
eeprom->scsi_id,
const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
- if (acb->srb_array[i].segment_x)
- kfree(acb->srb_array[i].segment_x);
+ kfree(acb->srb_array[i].segment_x);
}
/*
* Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
* should never cross a page boundary */
-static int __init adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
+static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
{
const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
*SEGMENTX_LEN;
*
* @acb: The adapter to print the information for.
**/
-static void __init adapter_print_config(struct AdapterCtlBlk *acb)
+static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
{
u8 bval;
*
* @acb: The adapter to initialize.
**/
-static void __init adapter_init_params(struct AdapterCtlBlk *acb)
+static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
{
struct NvRamType *eeprom = &acb->eeprom;
int i;
*
* @host: The scsi host instance to fill in the values for.
**/
-static void __init adapter_init_scsi_host(struct Scsi_Host *host)
+static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
struct NvRamType *eeprom = &acb->eeprom;
*
* @acb: The adapter which we are to init.
**/
-void __init adapter_init_chip(struct AdapterCtlBlk *acb)
+static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
{
struct NvRamType *eeprom = &acb->eeprom;
* Returns 0 if the initialization succeeds, any other value on
* failure.
**/
-static int __init adapter_init(struct AdapterCtlBlk *acb, u32 io_port,
- u32 io_port_len, u8 irq)
+static int __devinit adapter_init(struct AdapterCtlBlk *acb,
+ unsigned long io_port, u32 io_port_len, unsigned int irq)
{
if (!request_region(io_port, io_port_len, DC395X_NAME)) {
- dprintkl(KERN_ERR, "Failed to reserve IO region 0x%x\n", io_port);
+ dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
goto failed;
}
/* store port base to indicate we have registered it */
acb->irq_level = irq;
/* get eeprom configuration information and command line settings etc */
- check_eeprom(&acb->eeprom, (u16)io_port);
+ check_eeprom(&acb->eeprom, io_port);
print_eeprom_settings(&acb->eeprom);
/* setup adapter control block */
SPRINTF("SCSI Host Nr %i, ", host->host_no);
SPRINTF("DC395U/UW/F DC315/U %s\n",
(acb->config & HCC_WIDE_CARD) ? "Wide" : "");
- SPRINTF("io_port_base 0x%04x, ", acb->io_port_base);
- SPRINTF("irq_level 0x%02x, ", acb->irq_level);
+ SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base);
+ SPRINTF("irq_level 0x%04x, ", acb->irq_level);
SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
SPRINTF("MaxID %i, MaxLUN %i, ", host->max_id, host->max_lun);
static int __devinit dc395x_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
- struct Scsi_Host *scsi_host;
- struct AdapterCtlBlk *acb;
- unsigned int io_port_base;
+ struct Scsi_Host *scsi_host = NULL;
+ struct AdapterCtlBlk *acb = NULL;
+ unsigned long io_port_base;
unsigned int io_port_len;
- u8 irq;
+ unsigned int irq;
dprintkdbg(DBG_0, "Init one instance (%s)\n", pci_name(dev));
banner_display();
io_port_base = pci_resource_start(dev, 0) & PCI_BASE_ADDRESS_IO_MASK;
io_port_len = pci_resource_len(dev, 0);
irq = dev->irq;
- dprintkdbg(DBG_0, "IO_PORT=%04x, IRQ=%x\n", io_port_base, dev->irq);
+ dprintkdbg(DBG_0, "IO_PORT=0x%04lx, IRQ=0x%x\n", io_port_base, dev->irq);
/* allocate scsi host information (includes out adapter) */
scsi_host = scsi_host_alloc(&dc395x_driver_template,
sizeof(struct AdapterCtlBlk));
if (!scsi_host) {
dprintkl(KERN_INFO, "scsi_host_alloc failed\n");
- return -ENOMEM;
+ goto fail;
}
acb = (struct AdapterCtlBlk*)scsi_host->hostdata;
acb->scsi_host = scsi_host;
+ acb->dev = dev;
/* initialise the adapter and everything we need */
if (adapter_init(acb, io_port_base, io_port_len, irq)) {
dprintkl(KERN_INFO, "adapter init failed\n");
- scsi_host_put(scsi_host);
- return -ENODEV;
+ goto fail;
}
pci_set_master(dev);
/* get the scsi mid level to scan for new devices on the bus */
if (scsi_add_host(scsi_host, &dev->dev)) {
dprintkl(KERN_ERR, "scsi_add_host failed\n");
- adapter_uninit(acb);
- scsi_host_put(scsi_host);
- return -ENODEV;
+ goto fail;
}
pci_set_drvdata(dev, scsi_host);
scsi_scan_host(scsi_host);
return 0;
+
+fail:
+ if (acb != NULL)
+ adapter_uninit(acb);
+ if (scsi_host != NULL)
+ scsi_host_put(scsi_host);
+ pci_disable_device(dev);
+ return -ENODEV;
}
scsi_remove_host(scsi_host);
adapter_uninit(acb);
+ pci_disable_device(dev);
scsi_host_put(scsi_host);
pci_set_drvdata(dev, NULL);
}
git://git.onelab.eu / linux-2.6.git / blobdiff