+
/*
- dmx3191d.c - driver for the Domex DMX3191D SCSI card.
+ dmx3191d.c - midlevel driver for the Domex DMX3191D SCSI card.
Copyright (C) 2000 by Massimo Piccioni <dafastidio@libero.it>
- Portions Copyright (C) 2004 by Christoph Hellwig <hch@lst.de>
Based on the generic NCR5380 driver by Drew Eckhardt et al.
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stat.h>
#include <linux/interrupt.h>
-#include <asm/io.h>
+#include <linux/delay.h>
+#include "scsi.h"
#include <scsi/scsi_host.h>
-/*
- * Defintions for the generic 5380 driver.
- */
-#define AUTOSENSE
-
-#define NCR5380_read(reg) inb(port + reg)
-#define NCR5380_write(reg, value) outb(value, port + reg)
-
-#define NCR5380_implementation_fields unsigned int port
-#define NCR5380_local_declare() NCR5380_implementation_fields
-#define NCR5380_setup(instance) port = instance->io_port
+#include "dmx3191d.h"
+/* play with these values to tune up your system performances */
+/* default setting from g_NCR5380.c */
/*
- * Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
- */
-#include <linux/delay.h>
-#include "scsi.h"
+#define USLEEP
+#define USLEEP_POLL 1
+#define USLEEP_SLEEP 20
+#define USLEEP_WAITLONG 500
+*/
+#define AUTOSENSE
#include "NCR5380.h"
#include "NCR5380.c"
-#define DMX3191D_DRIVER_NAME "dmx3191d"
-#define DMX3191D_REGION_LEN 8
-
-
-static struct scsi_host_template dmx3191d_driver_template = {
- .proc_name = DMX3191D_DRIVER_NAME,
- .name = "Domex DMX3191D",
- .queuecommand = NCR5380_queue_command,
- .eh_abort_handler = NCR5380_abort,
- .eh_bus_reset_handler = NCR5380_bus_reset,
- .eh_device_reset_handler= NCR5380_device_reset,
- .eh_host_reset_handler = NCR5380_host_reset,
- .can_queue = 32,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 2,
- .use_clustering = DISABLE_CLUSTERING,
-};
-
-static int __devinit dmx3191d_probe_one(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- struct Scsi_Host *shost;
- unsigned long io;
- int error = -ENODEV;
-
- if (pci_enable_device(pdev))
- goto out;
-
- io = pci_resource_start(pdev, 0);
- if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
- printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
- io, io + DMX3191D_REGION_LEN);
- goto out_disable_device;
- }
- shost = scsi_host_alloc(&dmx3191d_driver_template,
- sizeof(struct NCR5380_hostdata));
- if (!shost)
- goto out_release_region;
- shost->io_port = io;
- shost->irq = pdev->irq;
-
- NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
-
- if (request_irq(pdev->irq, NCR5380_intr, SA_SHIRQ,
- DMX3191D_DRIVER_NAME, shost)) {
- /*
- * Steam powered scsi controllers run without an IRQ anyway
- */
- printk(KERN_WARNING "dmx3191: IRQ %d not available - "
- "switching to polled mode.\n", pdev->irq);
- shost->irq = SCSI_IRQ_NONE;
+static int __init dmx3191d_detect(Scsi_Host_Template *tmpl) {
+ int boards = 0;
+ struct Scsi_Host *instance = NULL;
+ struct pci_dev *pdev = NULL;
+
+ tmpl->proc_name = DMX3191D_DRIVER_NAME;
+
+ while ((pdev = pci_find_device(PCI_VENDOR_ID_DOMEX,
+ PCI_DEVICE_ID_DOMEX_DMX3191D, pdev))) {
+
+ unsigned long port;
+ if (pci_enable_device(pdev))
+ continue;
+
+ port = pci_resource_start (pdev, 0);
+
+ if (!request_region(port, DMX3191D_REGION, DMX3191D_DRIVER_NAME)) {
+ printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
+ port, port + DMX3191D_REGION);
+ continue;
+ }
+
+ instance = scsi_register(tmpl, sizeof(struct NCR5380_hostdata));
+ if(instance == NULL)
+ {
+ release_region(port, DMX3191D_REGION);
+ continue;
+ }
+ scsi_set_device(instance, &pdev->dev);
+ instance->io_port = port;
+ instance->irq = pdev->irq;
+ NCR5380_init(instance, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+
+ if (request_irq(pdev->irq, dmx3191d_intr, SA_SHIRQ,
+ DMX3191D_DRIVER_NAME, instance)) {
+ printk(KERN_WARNING "dmx3191: IRQ %d not available - switching to polled mode.\n", pdev->irq);
+ /* Steam powered scsi controllers run without an IRQ
+ anyway */
+ instance->irq = SCSI_IRQ_NONE;
+ }
+
+ boards++;
}
+ return boards;
+}
- pci_set_drvdata(pdev, shost);
-
- error = scsi_add_host(shost, &pdev->dev);
- if (error)
- goto out_free_irq;
-
- scsi_scan_host(shost);
- return 0;
+static const char * dmx3191d_info(struct Scsi_Host *host) {
+ static const char *info ="Domex DMX3191D";
- out_free_irq:
- free_irq(shost->irq, shost);
- out_release_region:
- release_region(shost->io_port, DMX3191D_REGION_LEN);
- out_disable_device:
- pci_disable_device(pdev);
- out:
- return error;
+ return info;
}
-static void __devexit dmx3191d_remove_one(struct pci_dev *pdev)
+static int dmx3191d_release_resources(struct Scsi_Host *instance)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
-
- scsi_remove_host(shost);
-
- NCR5380_exit(shost);
+ if(instance->irq!=SCSI_IRQ_NONE)
+ free_irq(instance->irq, instance);
+ NCR5380_exit(instance);
+ release_region(instance->io_port, DMX3191D_REGION);
- if (shost->irq != SCSI_IRQ_NONE)
- free_irq(shost->irq, shost);
- release_region(shost->io_port, DMX3191D_REGION_LEN);
- pci_disable_device(pdev);
-
- scsi_host_put(shost);
+ return 0;
}
-static struct pci_device_id dmx3191d_pci_tbl[] = {
- {PCI_VENDOR_ID_DOMEX, PCI_DEVICE_ID_DOMEX_DMX3191D,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
- { }
-};
-MODULE_DEVICE_TABLE(pci, dmx3191d_pci_tbl);
+MODULE_LICENSE("GPL");
-static struct pci_driver dmx3191d_pci_driver = {
- .name = DMX3191D_DRIVER_NAME,
- .id_table = dmx3191d_pci_tbl,
- .probe = dmx3191d_probe_one,
- .remove = __devexit_p(dmx3191d_remove_one),
+static Scsi_Host_Template driver_template = {
+ .proc_info = dmx3191d_proc_info,
+ .name = "Domex DMX3191D",
+ .detect = dmx3191d_detect,
+ .release = dmx3191d_release_resources,
+ .info = dmx3191d_info,
+ .queuecommand = dmx3191d_queue_command,
+ .eh_abort_handler = dmx3191d_abort,
+ .eh_bus_reset_handler = dmx3191d_bus_reset,
+ .eh_device_reset_handler = dmx3191d_device_reset,
+ .eh_host_reset_handler = dmx3191d_host_reset,
+ .can_queue = 32,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
};
+#include "scsi_module.c"
-static int __init dmx3191d_init(void)
-{
- return pci_module_init(&dmx3191d_pci_driver);
-}
-
-static void __exit dmx3191d_exit(void)
-{
- pci_unregister_driver(&dmx3191d_pci_driver);
-}
-
-module_init(dmx3191d_init);
-module_exit(dmx3191d_exit);
-
-MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>");
-MODULE_DESCRIPTION("Domex DMX3191D SCSI driver");
-MODULE_LICENSE("GPL");
git://git.onelab.eu / linux-2.6.git / blobdiff