#include <linux/blkdev.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#define i91u_MAXQUEUE 2
#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
-#define INI_VENDOR_ID 0x1101 /* Initio's PCI vendor ID */
-#define DMX_VENDOR_ID 0x134a /* Domex's PCI vendor ID */
#define I950_DEVICE_ID 0x9500 /* Initio's inic-950 product ID */
#define I940_DEVICE_ID 0x9400 /* Initio's inic-940 product ID */
#define I935_DEVICE_ID 0x9401 /* Initio's inic-935 product ID */
static unsigned int i91u_debug = DEBUG_DEFAULT;
#endif
-#define TULSZ(sz) (sizeof(sz) / sizeof(sz[0]))
#define TUL_RDWORD(x,y) (short)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) ))
typedef struct PCI_ID_Struc {
static void i91uSCBPost(BYTE * pHcb, BYTE * pScb);
-static const PCI_ID i91u_pci_devices[] = {
- { INI_VENDOR_ID, I950_DEVICE_ID },
- { INI_VENDOR_ID, I940_DEVICE_ID },
- { INI_VENDOR_ID, I935_DEVICE_ID },
- { INI_VENDOR_ID, I920_DEVICE_ID },
- { DMX_VENDOR_ID, I920_DEVICE_ID },
+/* PCI Devices supported by this driver */
+static struct pci_device_id i91u_pci_devices[] = {
+ { PCI_VENDOR_ID_INIT, I950_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_INIT, I940_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_INIT, I935_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_INIT, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_DOMEX, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { }
};
+MODULE_DEVICE_TABLE(pci, i91u_pci_devices);
#define DEBUG_INTERRUPT 0
#define DEBUG_QUEUE 0
return (tul_bad_seq(pCurHcb));
}
-static irqreturn_t i91u_intr(int irqno, void *dev_id, struct pt_regs *regs)
+static irqreturn_t i91u_intr(int irqno, void *dev_id)
{
struct Scsi_Host *dev = dev_id;
unsigned long flags;
init_i91uAdapter_table();
- for (i = 0; i < TULSZ(i91u_pci_devices); i++)
+ for (i = 0; i < ARRAY_SIZE(i91u_pci_devices); i++)
{
- while ((pDev = pci_find_device(i91u_pci_devices[i].vendor_id, i91u_pci_devices[i].device_id, pDev)) != NULL) {
+ while ((pDev = pci_find_device(i91u_pci_devices[i].vendor, i91u_pci_devices[i].device, pDev)) != NULL) {
if (pci_enable_device(pDev))
continue;
pci_read_config_dword(pDev, 0x44, (u32 *) & dRegValue);
if (((dRegValue & 0xFF00) >> 8) == 0xFF)
dRegValue = 0;
wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
- if (pci_set_dma_mask(pDev, 0xffffffff)) {
+ if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
printk(KERN_WARNING
"i91u: Could not set 32 bit DMA mask\n");
continue;
for (; tul_num_scb >= MAX_TARGETS + 3; tul_num_scb--) {
i = tul_num_ch * tul_num_scb * sizeof(SCB);
- if ((tul_scb = (SCB *) kmalloc(i, GFP_ATOMIC | GFP_DMA)) != NULL)
+ if ((tul_scb = kmalloc(i, GFP_ATOMIC | GFP_DMA)) != NULL)
break;
}
if (tul_scb == NULL) {
hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */
/* Initial tulip chip */
- ok = request_irq(pHCB->HCS_Intr, i91u_intr, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr, IRQF_DISABLED | IRQF_SHARED, "i91u", hreg);
if (ok < 0) {
printk(KERN_WARNING "i91u: unable to request IRQ %d\n\n", pHCB->HCS_Intr);
return 0;