** Low PCI traffic for command handling when on-chip RAM is present.
** Aggressive SCSI SCRIPTS optimizations.
**
+** 2005 by Matthew Wilcox and James Bottomley
+** PCI-ectomy. This driver now supports only the 720 chip (see the
+** NCR_Q720 and zalon drivers for the bus probe logic).
+**
*******************************************************************************
*/
**
** Supported NCR/SYMBIOS chips:
** 53C720 (Wide, Fast SCSI-2, intfly problems)
-** 53C810 (8 bits, Fast SCSI-2, no rom BIOS)
-** 53C815 (8 bits, Fast SCSI-2, on board rom BIOS)
-** 53C820 (Wide, Fast SCSI-2, no rom BIOS)
-** 53C825 (Wide, Fast SCSI-2, on board rom BIOS)
-** 53C860 (8 bits, Fast 20, no rom BIOS)
-** 53C875 (Wide, Fast 20, on board rom BIOS)
-** 53C895 (Wide, Fast 40, on board rom BIOS)
-** 53C895A (Wide, Fast 40, on board rom BIOS)
-** 53C896 (Wide, Fast 40, on board rom BIOS)
-** 53C897 (Wide, Fast 40, on board rom BIOS)
-** 53C1510D (Wide, Fast 40, on board rom BIOS)
-**
-** Other features:
-** Memory mapped IO (linux-1.3.X and above only)
-** Module
-** Shared IRQ (since linux-1.3.72)
*/
-/*
-** Name and version of the driver
-*/
-#define SCSI_NCR_DRIVER_NAME "ncr53c8xx-3.4.3b-20010512"
+/* Name and version of the driver */
+#define SCSI_NCR_DRIVER_NAME "ncr53c8xx-3.4.3g"
#define SCSI_NCR_DEBUG_FLAGS (0)
-/*==========================================================
-**
-** Include files
-**
-**==========================================================
-*/
-
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/system.h>
-#include "scsi.h"
-#include "hosts.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
#include "ncr53c8xx.h"
+#define NAME53C8XX "ncr53c8xx"
+
+/*==========================================================
+**
+** Debugging tags
+**
+**==========================================================
+*/
+
+#define DEBUG_ALLOC (0x0001)
+#define DEBUG_PHASE (0x0002)
+#define DEBUG_QUEUE (0x0008)
+#define DEBUG_RESULT (0x0010)
+#define DEBUG_POINTER (0x0020)
+#define DEBUG_SCRIPT (0x0040)
+#define DEBUG_TINY (0x0080)
+#define DEBUG_TIMING (0x0100)
+#define DEBUG_NEGO (0x0200)
+#define DEBUG_TAGS (0x0400)
+#define DEBUG_SCATTER (0x0800)
+#define DEBUG_IC (0x1000)
+
/*
-** Donnot compile integrity checking code for Linux-2.3.0
-** and above since SCSI data structures are not ready yet.
+** Enable/Disable debug messages.
+** Can be changed at runtime too.
*/
-/* #if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0) */
-#if 0
-#define SCSI_NCR_INTEGRITY_CHECKING
+
+#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
+static int ncr_debug = SCSI_NCR_DEBUG_FLAGS;
+ #define DEBUG_FLAGS ncr_debug
+#else
+ #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS
#endif
-#define NAME53C "ncr53c"
-#define NAME53C8XX "ncr53c8xx"
-#define DRIVER_SMP_LOCK ncr53c8xx_lock
+static inline struct list_head *ncr_list_pop(struct list_head *head)
+{
+ if (!list_empty(head)) {
+ struct list_head *elem = head->next;
+
+ list_del(elem);
+ return elem;
+ }
+
+ return NULL;
+}
+
+/*==========================================================
+**
+** Simple power of two buddy-like allocator.
+**
+** This simple code is not intended to be fast, but to
+** provide power of 2 aligned memory allocations.
+** Since the SCRIPTS processor only supplies 8 bit
+** arithmetic, this allocator allows simple and fast
+** address calculations from the SCRIPTS code.
+** In addition, cache line alignment is guaranteed for
+** power of 2 cache line size.
+** Enhanced in linux-2.3.44 to provide a memory pool
+** per pcidev to support dynamic dma mapping. (I would
+** have preferred a real bus astraction, btw).
+**
+**==========================================================
+*/
+
+#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */
+#if PAGE_SIZE >= 8192
+#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */
+#else
+#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */
+#endif
+#define MEMO_FREE_UNUSED /* Free unused pages immediately */
+#define MEMO_WARN 1
+#define MEMO_GFP_FLAGS GFP_ATOMIC
+#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER)
+#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT)
+#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1)
+
+typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */
+typedef struct device *m_bush_t; /* Something that addresses DMAable */
+
+typedef struct m_link { /* Link between free memory chunks */
+ struct m_link *next;
+} m_link_s;
+
+typedef struct m_vtob { /* Virtual to Bus address translation */
+ struct m_vtob *next;
+ m_addr_t vaddr;
+ m_addr_t baddr;
+} m_vtob_s;
+#define VTOB_HASH_SHIFT 5
+#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT)
+#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1)
+#define VTOB_HASH_CODE(m) \
+ ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK)
+
+typedef struct m_pool { /* Memory pool of a given kind */
+ m_bush_t bush;
+ m_addr_t (*getp)(struct m_pool *);
+ void (*freep)(struct m_pool *, m_addr_t);
+ int nump;
+ m_vtob_s *(vtob[VTOB_HASH_SIZE]);
+ struct m_pool *next;
+ struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1];
+} m_pool_s;
+
+static void *___m_alloc(m_pool_s *mp, int size)
+{
+ int i = 0;
+ int s = (1 << MEMO_SHIFT);
+ int j;
+ m_addr_t a;
+ m_link_s *h = mp->h;
+
+ if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+ return NULL;
+
+ while (size > s) {
+ s <<= 1;
+ ++i;
+ }
+
+ j = i;
+ while (!h[j].next) {
+ if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+ h[j].next = (m_link_s *)mp->getp(mp);
+ if (h[j].next)
+ h[j].next->next = NULL;
+ break;
+ }
+ ++j;
+ s <<= 1;
+ }
+ a = (m_addr_t) h[j].next;
+ if (a) {
+ h[j].next = h[j].next->next;
+ while (j > i) {
+ j -= 1;
+ s >>= 1;
+ h[j].next = (m_link_s *) (a+s);
+ h[j].next->next = NULL;
+ }
+ }
+#ifdef DEBUG
+ printk("___m_alloc(%d) = %p\n", size, (void *) a);
+#endif
+ return (void *) a;
+}
+
+static void ___m_free(m_pool_s *mp, void *ptr, int size)
+{
+ int i = 0;
+ int s = (1 << MEMO_SHIFT);
+ m_link_s *q;
+ m_addr_t a, b;
+ m_link_s *h = mp->h;
+
+#ifdef DEBUG
+ printk("___m_free(%p, %d)\n", ptr, size);
+#endif
+
+ if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+ return;
+
+ while (size > s) {
+ s <<= 1;
+ ++i;
+ }
+
+ a = (m_addr_t) ptr;
+
+ while (1) {
+#ifdef MEMO_FREE_UNUSED
+ if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+ mp->freep(mp, a);
+ break;
+ }
+#endif
+ b = a ^ s;
+ q = &h[i];
+ while (q->next && q->next != (m_link_s *) b) {
+ q = q->next;
+ }
+ if (!q->next) {
+ ((m_link_s *) a)->next = h[i].next;
+ h[i].next = (m_link_s *) a;
+ break;
+ }
+ q->next = q->next->next;
+ a = a & b;
+ s <<= 1;
+ ++i;
+ }
+}
+
+static DEFINE_SPINLOCK(ncr53c8xx_lock);
+
+static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags)
+{
+ void *p;
+
+ p = ___m_alloc(mp, size);
+
+ if (DEBUG_FLAGS & DEBUG_ALLOC)
+ printk ("new %-10s[%4d] @%p.\n", name, size, p);
+
+ if (p)
+ memset(p, 0, size);
+ else if (uflags & MEMO_WARN)
+ printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
+
+ return p;
+}
+
+#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN)
+
+static void __m_free(m_pool_s *mp, void *ptr, int size, char *name)
+{
+ if (DEBUG_FLAGS & DEBUG_ALLOC)
+ printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
+
+ ___m_free(mp, ptr, size);
+
+}
+
+/*
+ * With pci bus iommu support, we use a default pool of unmapped memory
+ * for memory we donnot need to DMA from/to and one pool per pcidev for
+ * memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
+ */
+
+static m_addr_t ___mp0_getp(m_pool_s *mp)
+{
+ m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER);
+ if (m)
+ ++mp->nump;
+ return m;
+}
+
+static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
+{
+ free_pages(m, MEMO_PAGE_ORDER);
+ --mp->nump;
+}
+
+static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep};
+
+/*
+ * DMAable pools.
+ */
+
+/*
+ * With pci bus iommu support, we maintain one pool per pcidev and a
+ * hashed reverse table for virtual to bus physical address translations.
+ */
+static m_addr_t ___dma_getp(m_pool_s *mp)
+{
+ m_addr_t vp;
+ m_vtob_s *vbp;
+
+ vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB");
+ if (vbp) {
+ dma_addr_t daddr;
+ vp = (m_addr_t) dma_alloc_coherent(mp->bush,
+ PAGE_SIZE<<MEMO_PAGE_ORDER,
+ &daddr, GFP_ATOMIC);
+ if (vp) {
+ int hc = VTOB_HASH_CODE(vp);
+ vbp->vaddr = vp;
+ vbp->baddr = daddr;
+ vbp->next = mp->vtob[hc];
+ mp->vtob[hc] = vbp;
+ ++mp->nump;
+ return vp;
+ }
+ }
+ if (vbp)
+ __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+ return 0;
+}
+
+static void ___dma_freep(m_pool_s *mp, m_addr_t m)
+{
+ m_vtob_s **vbpp, *vbp;
+ int hc = VTOB_HASH_CODE(m);
+
+ vbpp = &mp->vtob[hc];
+ while (*vbpp && (*vbpp)->vaddr != m)
+ vbpp = &(*vbpp)->next;
+ if (*vbpp) {
+ vbp = *vbpp;
+ *vbpp = (*vbpp)->next;
+ dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER,
+ (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
+ __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+ --mp->nump;
+ }
+}
+
+static inline m_pool_s *___get_dma_pool(m_bush_t bush)
+{
+ m_pool_s *mp;
+ for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
+ return mp;
+}
+
+static m_pool_s *___cre_dma_pool(m_bush_t bush)
+{
+ m_pool_s *mp;
+ mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL");
+ if (mp) {
+ memset(mp, 0, sizeof(*mp));
+ mp->bush = bush;
+ mp->getp = ___dma_getp;
+ mp->freep = ___dma_freep;
+ mp->next = mp0.next;
+ mp0.next = mp;
+ }
+ return mp;
+}
+
+static void ___del_dma_pool(m_pool_s *p)
+{
+ struct m_pool **pp = &mp0.next;
+
+ while (*pp && *pp != p)
+ pp = &(*pp)->next;
+ if (*pp) {
+ *pp = (*pp)->next;
+ __m_free(&mp0, p, sizeof(*p), "MPOOL");
+ }
+}
+
+static void *__m_calloc_dma(m_bush_t bush, int size, char *name)
+{
+ u_long flags;
+ struct m_pool *mp;
+ void *m = NULL;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (!mp)
+ mp = ___cre_dma_pool(bush);
+ if (mp)
+ m = __m_calloc(mp, size, name);
+ if (mp && !mp->nump)
+ ___del_dma_pool(mp);
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+
+ return m;
+}
+
+static void __m_free_dma(m_bush_t bush, void *m, int size, char *name)
+{
+ u_long flags;
+ struct m_pool *mp;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (mp)
+ __m_free(mp, m, size, name);
+ if (mp && !mp->nump)
+ ___del_dma_pool(mp);
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+}
+
+static m_addr_t __vtobus(m_bush_t bush, void *m)
+{
+ u_long flags;
+ m_pool_s *mp;
+ int hc = VTOB_HASH_CODE(m);
+ m_vtob_s *vp = NULL;
+ m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (mp) {
+ vp = mp->vtob[hc];
+ while (vp && (m_addr_t) vp->vaddr != a)
+ vp = vp->next;
+ }
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+ return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
+}
+
+#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n)
+#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n)
+#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n)
+#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n)
+#define _vtobus(np, p) __vtobus(np->dev, p)
+#define vtobus(p) _vtobus(np, p)
-#include "sym53c8xx_comm.h"
+/*
+ * Deal with DMA mapping/unmapping.
+ */
+
+/* To keep track of the dma mapping (sg/single) that has been set */
+#define __data_mapped SCp.phase
+#define __data_mapping SCp.have_data_in
+
+static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ switch(cmd->__data_mapped) {
+ case 2:
+ dma_unmap_sg(dev, cmd->request_buffer, cmd->use_sg,
+ cmd->sc_data_direction);
+ break;
+ case 1:
+ dma_unmap_single(dev, cmd->__data_mapping,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ break;
+ }
+ cmd->__data_mapped = 0;
+}
+
+static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ dma_addr_t mapping;
+
+ if (cmd->request_bufflen == 0)
+ return 0;
+
+ mapping = dma_map_single(dev, cmd->request_buffer,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ cmd->__data_mapped = 1;
+ cmd->__data_mapping = mapping;
+
+ return mapping;
+}
+
+static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ int use_sg;
+
+ if (cmd->use_sg == 0)
+ return 0;
+
+ use_sg = dma_map_sg(dev, cmd->request_buffer, cmd->use_sg,
+ cmd->sc_data_direction);
+ cmd->__data_mapped = 2;
+ cmd->__data_mapping = use_sg;
+
+ return use_sg;
+}
+
+#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd)
+#define map_scsi_single_data(np, cmd) __map_scsi_single_data(np->dev, cmd)
+#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd)
+
+/*==========================================================
+**
+** Driver setup.
+**
+** This structure is initialized from linux config
+** options. It can be overridden at boot-up by the boot
+** command line.
+**
+**==========================================================
+*/
+static struct ncr_driver_setup
+ driver_setup = SCSI_NCR_DRIVER_SETUP;
+
+#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+static struct ncr_driver_setup
+ driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP;
+#endif
+
+#define initverbose (driver_setup.verbose)
+#define bootverbose (np->verbose)
+
+
+/*===================================================================
+**
+** Driver setup from the boot command line
+**
+**===================================================================
+*/
+
+#ifdef MODULE
+#define ARG_SEP ' '
+#else
+#define ARG_SEP ','
+#endif
+
+#define OPT_TAGS 1
+#define OPT_MASTER_PARITY 2
+#define OPT_SCSI_PARITY 3
+#define OPT_DISCONNECTION 4
+#define OPT_SPECIAL_FEATURES 5
+#define OPT_UNUSED_1 6
+#define OPT_FORCE_SYNC_NEGO 7
+#define OPT_REVERSE_PROBE 8
+#define OPT_DEFAULT_SYNC 9
+#define OPT_VERBOSE 10
+#define OPT_DEBUG 11
+#define OPT_BURST_MAX 12
+#define OPT_LED_PIN 13
+#define OPT_MAX_WIDE 14
+#define OPT_SETTLE_DELAY 15
+#define OPT_DIFF_SUPPORT 16
+#define OPT_IRQM 17
+#define OPT_PCI_FIX_UP 18
+#define OPT_BUS_CHECK 19
+#define OPT_OPTIMIZE 20
+#define OPT_RECOVERY 21
+#define OPT_SAFE_SETUP 22
+#define OPT_USE_NVRAM 23
+#define OPT_EXCLUDE 24
+#define OPT_HOST_ID 25
+
+#ifdef SCSI_NCR_IARB_SUPPORT
+#define OPT_IARB 26
+#endif
+
+static char setup_token[] __initdata =
+ "tags:" "mpar:"
+ "spar:" "disc:"
+ "specf:" "ultra:"
+ "fsn:" "revprob:"
+ "sync:" "verb:"
+ "debug:" "burst:"
+ "led:" "wide:"
+ "settle:" "diff:"
+ "irqm:" "pcifix:"
+ "buschk:" "optim:"
+ "recovery:"
+ "safe:" "nvram:"
+ "excl:" "hostid:"
+#ifdef SCSI_NCR_IARB_SUPPORT
+ "iarb:"
+#endif
+ ; /* DONNOT REMOVE THIS ';' */
+
+#ifdef MODULE
+#define ARG_SEP ' '
+#else
+#define ARG_SEP ','
+#endif
+
+static int __init get_setup_token(char *p)
+{
+ char *cur = setup_token;
+ char *pc;
+ int i = 0;
+
+ while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+ ++pc;
+ ++i;
+ if (!strncmp(p, cur, pc - cur))
+ return i;
+ cur = pc;
+ }
+ return 0;
+}
+
+
+static int __init sym53c8xx__setup(char *str)
+{
+#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+ char *cur = str;
+ char *pc, *pv;
+ int i, val, c;
+ int xi = 0;
+
+ while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+ char *pe;
+
+ val = 0;
+ pv = pc;
+ c = *++pv;
+
+ if (c == 'n')
+ val = 0;
+ else if (c == 'y')
+ val = 1;
+ else
+ val = (int) simple_strtoul(pv, &pe, 0);
+
+ switch (get_setup_token(cur)) {
+ case OPT_TAGS:
+ driver_setup.default_tags = val;
+ if (pe && *pe == '/') {
+ i = 0;
+ while (*pe && *pe != ARG_SEP &&
+ i < sizeof(driver_setup.tag_ctrl)-1) {
+ driver_setup.tag_ctrl[i++] = *pe++;
+ }
+ driver_setup.tag_ctrl[i] = '\0';
+ }
+ break;
+ case OPT_MASTER_PARITY:
+ driver_setup.master_parity = val;
+ break;
+ case OPT_SCSI_PARITY:
+ driver_setup.scsi_parity = val;
+ break;
+ case OPT_DISCONNECTION:
+ driver_setup.disconnection = val;
+ break;
+ case OPT_SPECIAL_FEATURES:
+ driver_setup.special_features = val;
+ break;
+ case OPT_FORCE_SYNC_NEGO:
+ driver_setup.force_sync_nego = val;
+ break;
+ case OPT_REVERSE_PROBE:
+ driver_setup.reverse_probe = val;
+ break;
+ case OPT_DEFAULT_SYNC:
+ driver_setup.default_sync = val;
+ break;
+ case OPT_VERBOSE:
+ driver_setup.verbose = val;
+ break;
+ case OPT_DEBUG:
+ driver_setup.debug = val;
+ break;
+ case OPT_BURST_MAX:
+ driver_setup.burst_max = val;
+ break;
+ case OPT_LED_PIN:
+ driver_setup.led_pin = val;
+ break;
+ case OPT_MAX_WIDE:
+ driver_setup.max_wide = val? 1:0;
+ break;
+ case OPT_SETTLE_DELAY:
+ driver_setup.settle_delay = val;
+ break;
+ case OPT_DIFF_SUPPORT:
+ driver_setup.diff_support = val;
+ break;
+ case OPT_IRQM:
+ driver_setup.irqm = val;
+ break;
+ case OPT_PCI_FIX_UP:
+ driver_setup.pci_fix_up = val;
+ break;
+ case OPT_BUS_CHECK:
+ driver_setup.bus_check = val;
+ break;
+ case OPT_OPTIMIZE:
+ driver_setup.optimize = val;
+ break;
+ case OPT_RECOVERY:
+ driver_setup.recovery = val;
+ break;
+ case OPT_USE_NVRAM:
+ driver_setup.use_nvram = val;
+ break;
+ case OPT_SAFE_SETUP:
+ memcpy(&driver_setup, &driver_safe_setup,
+ sizeof(driver_setup));
+ break;
+ case OPT_EXCLUDE:
+ if (xi < SCSI_NCR_MAX_EXCLUDES)
+ driver_setup.excludes[xi++] = val;
+ break;
+ case OPT_HOST_ID:
+ driver_setup.host_id = val;
+ break;
+#ifdef SCSI_NCR_IARB_SUPPORT
+ case OPT_IARB:
+ driver_setup.iarb = val;
+ break;
+#endif
+ default:
+ printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
+ break;
+ }
+
+ if ((cur = strchr(cur, ARG_SEP)) != NULL)
+ ++cur;
+ }
+#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
+ return 1;
+}
+
+/*===================================================================
+**
+** Get device queue depth from boot command line.
+**
+**===================================================================
+*/
+#define DEF_DEPTH (driver_setup.default_tags)
+#define ALL_TARGETS -2
+#define NO_TARGET -1
+#define ALL_LUNS -2
+#define NO_LUN -1
-int ncr53c8xx_slave_configure(Scsi_Device *device);
-int ncr53c8xx_bus_reset(Scsi_Cmnd *cmd);
-int ncr53c8xx_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *));
-const char *ncr53c8xx_info (struct Scsi_Host *host);
+static int device_queue_depth(int unit, int target, int lun)
+{
+ int c, h, t, u, v;
+ char *p = driver_setup.tag_ctrl;
+ char *ep;
+
+ h = -1;
+ t = NO_TARGET;
+ u = NO_LUN;
+ while ((c = *p++) != 0) {
+ v = simple_strtoul(p, &ep, 0);
+ switch(c) {
+ case '/':
+ ++h;
+ t = ALL_TARGETS;
+ u = ALL_LUNS;
+ break;
+ case 't':
+ if (t != target)
+ t = (target == v) ? v : NO_TARGET;
+ u = ALL_LUNS;
+ break;
+ case 'u':
+ if (u != lun)
+ u = (lun == v) ? v : NO_LUN;
+ break;
+ case 'q':
+ if (h == unit &&
+ (t == ALL_TARGETS || t == target) &&
+ (u == ALL_LUNS || u == lun))
+ return v;
+ break;
+ case '-':
+ t = ALL_TARGETS;
+ u = ALL_LUNS;
+ break;
+ default:
+ break;
+ }
+ p = ep;
+ }
+ return DEF_DEPTH;
+}
/*==========================================================
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) + ((scsi_code) & 0x7f))
-static void ncr53c8xx_timeout(unsigned long np);
-static int ncr53c8xx_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
- int length, int func);
-
#define initverbose (driver_setup.verbose)
#define bootverbose (np->verbose)
-#ifdef SCSI_NCR_NVRAM_SUPPORT
-static u_char Tekram_sync[16] __initdata =
- {25,31,37,43, 50,62,75,125, 12,15,18,21, 6,7,9,10};
-#endif /* SCSI_NCR_NVRAM_SUPPORT */
-
/*==========================================================
**
** Command control block states.
#define NS_WIDE (2)
#define NS_PPR (4)
-/*==========================================================
-**
-** "Special features" of targets.
-** quirks field of struct tcb.
-** actualquirks field of struct ccb.
-**
-**==========================================================
-*/
-
-#define QUIRK_AUTOSAVE (0x01)
-#define QUIRK_NOMSG (0x02)
-#define QUIRK_NOSYNC (0x10)
-#define QUIRK_NOWIDE16 (0x20)
-
-/*==========================================================
-**
-** Capability bits in Inquire response byte 7.
-**
-**==========================================================
-*/
-
-#define INQ7_QUEUE (0x02)
-#define INQ7_SYNC (0x10)
-#define INQ7_WIDE16 (0x20)
-
/*==========================================================
**
** Misc.
**==========================================================
*/
+static struct scsi_transport_template *ncr53c8xx_transport_template = NULL;
+
struct tcb;
struct lcb;
struct ccb;
struct ncb;
struct script;
-typedef struct ncb * ncb_p;
-typedef struct tcb * tcb_p;
-typedef struct lcb * lcb_p;
-typedef struct ccb * ccb_p;
-
struct link {
ncrcmd l_cmd;
ncrcmd l_paddr;
**----------------------------------------------------------------
*/
struct link jump_lcb[4]; /* JUMPs for reselection */
- lcb_p lp[MAX_LUN]; /* The lcb's of this tcb */
- u_char inq_done; /* Target capabilities received */
- u_char inq_byte7; /* Contains these capabilities */
+ struct lcb * lp[MAX_LUN]; /* The lcb's of this tcb */
/*----------------------------------------------------------------
** Pointer to the ccb used for negotiation.
** when tagged command queuing is enabled.
**----------------------------------------------------------------
*/
- ccb_p nego_cp;
+ struct ccb * nego_cp;
/*----------------------------------------------------------------
** statistical data
**----------------------------------------------------------------
*/
#ifdef SCSI_NCR_BIG_ENDIAN
-/*0*/ u_short period;
+/*0*/ u16 period;
/*2*/ u_char sval;
/*3*/ u_char minsync;
/*0*/ u_char wval;
#else
/*0*/ u_char minsync;
/*1*/ u_char sval;
-/*2*/ u_short period;
+/*2*/ u16 period;
/*0*/ u_char maxoffs;
/*1*/ u_char quirks;
/*2*/ u_char widedone;
/*3*/ u_char wval;
#endif
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
- u_char ic_min_sync;
- u_char ic_max_width;
- u_char ic_maximums_set;
- u_char ic_done;
-#endif
-
- /*----------------------------------------------------------------
- ** User settable limits and options.
- ** These limits are read from the NVRAM if present.
- **----------------------------------------------------------------
- */
+ /* User settable limits and options. */
u_char usrsync;
u_char usrwide;
u_char usrtags;
u_char usrflag;
+ struct scsi_target *starget;
};
/*========================================================================
** CCB queue management.
**----------------------------------------------------------------
*/
- XPT_QUEHEAD free_ccbq; /* Queue of available CCBs */
- XPT_QUEHEAD busy_ccbq; /* Queue of busy CCBs */
- XPT_QUEHEAD wait_ccbq; /* Queue of waiting for IO CCBs */
- XPT_QUEHEAD skip_ccbq; /* Queue of skipped CCBs */
+ struct list_head free_ccbq; /* Queue of available CCBs */
+ struct list_head busy_ccbq; /* Queue of busy CCBs */
+ struct list_head wait_ccbq; /* Queue of waiting for IO CCBs */
+ struct list_head skip_ccbq; /* Queue of skipped CCBs */
u_char actccbs; /* Number of allocated CCBs */
u_char busyccbs; /* CCBs busy for this lun */
u_char queuedccbs; /* CCBs queued to the controller*/
u_char usetags; /* Command queuing is active */
u_char maxtags; /* Max nr of tags asked by user */
u_char numtags; /* Current number of tags */
- u_char inq_byte7; /* Store unit CmdQ capabitility */
/*----------------------------------------------------------------
** QUEUE FULL control and ORDERED tag control.
** QUEUE FULL and ORDERED tag control.
**----------------------------------------------------------------
*/
- u_short num_good; /* Nr of GOOD since QUEUE FULL */
+ u16 num_good; /* Nr of GOOD since QUEUE FULL */
tagmap_t tags_umap; /* Used tags bitmap */
tagmap_t tags_smap; /* Tags in use at 'tag_stime' */
u_long tags_stime; /* Last time we set smap=umap */
- ccb_p held_ccb; /* CCB held for QUEUE FULL */
+ struct ccb * held_ccb; /* CCB held for QUEUE FULL */
};
/*========================================================================
** The virtual address of the ccb containing this header.
**----------------------------------------------------------------
*/
- ccb_p cp;
+ struct ccb * cp;
/*----------------------------------------------------------------
** Status fields.
struct scr_tblmove smsg ;
struct scr_tblmove cmd ;
struct scr_tblmove sense ;
- struct scr_tblmove data [MAX_SCATTER];
+ struct scr_tblmove data[MAX_SCATTER];
};
** pointer to a control block.
**----------------------------------------------------------------
*/
- Scsi_Cmnd *cmd; /* SCSI command */
+ struct scsi_cmnd *cmd; /* SCSI command */
u_char cdb_buf[16]; /* Copy of CDB */
u_char sense_buf[64];
int data_len; /* Total data length */
u_char lun;
u_char queued;
u_char auto_sense;
- ccb_p link_ccb; /* Host adapter CCB chain */
- XPT_QUEHEAD link_ccbq; /* Link to unit CCB queue */
+ struct ccb * link_ccb; /* Host adapter CCB chain */
+ struct list_head link_ccbq; /* Link to unit CCB queue */
u32 startp; /* Initial data pointer */
u_long magic; /* Free / busy CCB flag */
};
** CCBs management queues.
**----------------------------------------------------------------
*/
- Scsi_Cmnd *waiting_list; /* Commands waiting for a CCB */
+ struct scsi_cmnd *waiting_list; /* Commands waiting for a CCB */
/* when lcb is not allocated. */
- Scsi_Cmnd *done_list; /* Commands waiting for done() */
+ struct scsi_cmnd *done_list; /* Commands waiting for done() */
/* callback to be invoked. */
spinlock_t smp_lock; /* Lock for SMP threading */
**----------------------------------------------------------------
*/
int unit; /* Unit number */
- char chip_name[8]; /* Chip name */
char inst_name[16]; /* ncb instance name */
/*----------------------------------------------------------------
** Virtual and physical bus addresses of the chip.
**----------------------------------------------------------------
*/
- vm_offset_t vaddr; /* Virtual and bus address of */
- vm_offset_t paddr; /* chip's IO registers. */
- vm_offset_t paddr2; /* On-chip RAM bus address. */
+ void __iomem *vaddr; /* Virtual and bus address of */
+ unsigned long paddr; /* chip's IO registers. */
+ unsigned long paddr2; /* On-chip RAM bus address. */
volatile /* Pointer to volatile for */
- struct ncr_reg *reg; /* memory mapped IO. */
+ struct ncr_reg __iomem *reg; /* memory mapped IO. */
/*----------------------------------------------------------------
** SCRIPTS virtual and physical bus addresses.
**----------------------------------------------------------------
*/
struct device *dev;
- u_short device_id; /* PCI device id */
u_char revision_id; /* PCI device revision id */
- u_char bus; /* PCI BUS number */
- u_char device_fn; /* PCI BUS device and function */
- u_long base_io; /* IO space base address */
- u_int irq; /* IRQ level */
- u_int features; /* Chip features map */
+ u32 irq; /* IRQ level */
+ u32 features; /* Chip features map */
u_char myaddr; /* SCSI id of the adapter */
u_char maxburst; /* log base 2 of dwords burst */
u_char maxwide; /* Maximum transfer width */
** SCRIPTS processor in order to start SCSI commands.
**----------------------------------------------------------------
*/
- u_short squeueput; /* Next free slot of the queue */
- u_short actccbs; /* Number of allocated CCBs */
- u_short queuedccbs; /* Number of CCBs in start queue*/
- u_short queuedepth; /* Start queue depth */
+ u16 squeueput; /* Next free slot of the queue */
+ u16 actccbs; /* Number of allocated CCBs */
+ u16 queuedccbs; /* Number of CCBs in start queue*/
+ u16 queuedepth; /* Start queue depth */
/*----------------------------------------------------------------
** Timeout handler.
struct ccb *ccb; /* Global CCB */
struct usrcmd user; /* Command from user */
volatile u_char release_stage; /* Synchronisation stage on release */
-
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
- /*----------------------------------------------------------------
- ** Fields that are used for integrity check
- **----------------------------------------------------------------
- */
- unsigned char check_integrity; /* Enable midlayer integ.check on
- * bus scan. */
- unsigned char check_integ_par; /* Set if par or Init. Det. error
- * used only during integ check */
-#endif
};
#define NCB_SCRIPT_PHYS(np,lbl) (np->p_script + offsetof (struct script, lbl))
#endif
ncrcmd save_dp [ 7];
ncrcmd restore_dp [ 5];
- ncrcmd disconnect [ 17];
+ ncrcmd disconnect [ 10];
ncrcmd msg_out [ 9];
ncrcmd msg_out_done [ 7];
ncrcmd idle [ 2];
**==========================================================
*/
-static void ncr_alloc_ccb (ncb_p np, u_char tn, u_char ln);
-static void ncr_complete (ncb_p np, ccb_p cp);
-static void ncr_exception (ncb_p np);
-static void ncr_free_ccb (ncb_p np, ccb_p cp);
-static void ncr_init_ccb (ncb_p np, ccb_p cp);
-static void ncr_init_tcb (ncb_p np, u_char tn);
-static lcb_p ncr_alloc_lcb (ncb_p np, u_char tn, u_char ln);
-static lcb_p ncr_setup_lcb (ncb_p np, u_char tn, u_char ln,
- u_char *inq_data);
-static void ncr_getclock (ncb_p np, int mult);
-static void ncr_selectclock (ncb_p np, u_char scntl3);
-static ccb_p ncr_get_ccb (ncb_p np, u_char tn, u_char ln);
-static void ncr_chip_reset (ncb_p np, int delay);
-static void ncr_init (ncb_p np, int reset, char * msg, u_long code);
-static int ncr_int_sbmc (ncb_p np);
-static int ncr_int_par (ncb_p np);
-static void ncr_int_ma (ncb_p np);
-static void ncr_int_sir (ncb_p np);
-static void ncr_int_sto (ncb_p np);
-static u_long ncr_lookup (char* id);
+static void ncr_alloc_ccb (struct ncb *np, u_char tn, u_char ln);
+static void ncr_complete (struct ncb *np, struct ccb *cp);
+static void ncr_exception (struct ncb *np);
+static void ncr_free_ccb (struct ncb *np, struct ccb *cp);
+static void ncr_init_ccb (struct ncb *np, struct ccb *cp);
+static void ncr_init_tcb (struct ncb *np, u_char tn);
+static struct lcb * ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln);
+static struct lcb * ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev);
+static void ncr_getclock (struct ncb *np, int mult);
+static void ncr_selectclock (struct ncb *np, u_char scntl3);
+static struct ccb *ncr_get_ccb (struct ncb *np, struct scsi_cmnd *cmd);
+static void ncr_chip_reset (struct ncb *np, int delay);
+static void ncr_init (struct ncb *np, int reset, char * msg, u_long code);
+static int ncr_int_sbmc (struct ncb *np);
+static int ncr_int_par (struct ncb *np);
+static void ncr_int_ma (struct ncb *np);
+static void ncr_int_sir (struct ncb *np);
+static void ncr_int_sto (struct ncb *np);
static void ncr_negotiate (struct ncb* np, struct tcb* tp);
-static int ncr_prepare_nego(ncb_p np, ccb_p cp, u_char *msgptr);
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
-static int ncr_ic_nego(ncb_p np, ccb_p cp, Scsi_Cmnd *cmd, u_char *msgptr);
-#endif
+static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr);
static void ncr_script_copy_and_bind
- (ncb_p np, ncrcmd *src, ncrcmd *dst, int len);
+ (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len);
static void ncr_script_fill (struct script * scr, struct scripth * scripth);
-static int ncr_scatter (ncb_p np, ccb_p cp, Scsi_Cmnd *cmd);
-static void ncr_getsync (ncb_p np, u_char sfac, u_char *fakp, u_char *scntl3p);
-static void ncr_setsync (ncb_p np, ccb_p cp, u_char scntl3, u_char sxfer);
-static void ncr_setup_tags (ncb_p np, u_char tn, u_char ln);
-static void ncr_setwide (ncb_p np, ccb_p cp, u_char wide, u_char ack);
-static int ncr_show_msg (u_char * msg);
-static void ncr_print_msg (ccb_p cp, char *label, u_char *msg);
-static int ncr_snooptest (ncb_p np);
-static void ncr_timeout (ncb_p np);
-static void ncr_wakeup (ncb_p np, u_long code);
-static void ncr_wakeup_done (ncb_p np);
-static void ncr_start_next_ccb (ncb_p np, lcb_p lp, int maxn);
-static void ncr_put_start_queue(ncb_p np, ccb_p cp);
-static void ncr_start_reset (ncb_p np);
-static int ncr_reset_scsi_bus (ncb_p np, int enab_int, int settle_delay);
-
-#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
-static void ncr_usercmd (ncb_p np);
-#endif
-
-static void insert_into_waiting_list(ncb_p np, Scsi_Cmnd *cmd);
-static Scsi_Cmnd *retrieve_from_waiting_list(int to_remove, ncb_p np, Scsi_Cmnd *cmd);
-static void process_waiting_list(ncb_p np, int sts);
+static int ncr_scatter (struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd);
+static void ncr_getsync (struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p);
+static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer);
+static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev);
+static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack);
+static int ncr_snooptest (struct ncb *np);
+static void ncr_timeout (struct ncb *np);
+static void ncr_wakeup (struct ncb *np, u_long code);
+static void ncr_wakeup_done (struct ncb *np);
+static void ncr_start_next_ccb (struct ncb *np, struct lcb * lp, int maxn);
+static void ncr_put_start_queue(struct ncb *np, struct ccb *cp);
+
+static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd);
+static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd);
+static void process_waiting_list(struct ncb *np, int sts);
#define remove_from_waiting_list(np, cmd) \
retrieve_from_waiting_list(1, (np), (cmd))
#define requeue_waiting_list(np) process_waiting_list((np), DID_OK)
#define reset_waiting_list(np) process_waiting_list((np), DID_RESET)
-static inline char *ncr_name (ncb_p np)
+static inline char *ncr_name (struct ncb *np)
{
return np->inst_name;
}
*/
/*
- ** The M_REJECT problem seems to be due to a selection
+ ** The MESSAGE_REJECT problem seems to be due to a selection
** timing problem.
** Wait immediately for the selection to complete.
** (2.5x behaves so)
/*
** Selection complete.
** Send the IDENTIFY and SIMPLE_TAG messages
- ** (and the M_X_SYNC_REQ message)
+ ** (and the EXTENDED_SDTR message)
*/
SCR_MOVE_TBL ^ SCR_MSG_OUT,
offsetof (struct dsb, smsg),
/*
** Initialize the msgout buffer with a NOOP message.
*/
- SCR_LOAD_REG (scratcha, M_NOOP),
+ SCR_LOAD_REG (scratcha, NOP),
0,
SCR_COPY (1),
RADDR (scratcha),
/*
** Handle this message.
*/
- SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)),
+ SCR_JUMP ^ IFTRUE (DATA (COMMAND_COMPLETE)),
PADDR (complete),
- SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)),
+ SCR_JUMP ^ IFTRUE (DATA (DISCONNECT)),
PADDR (disconnect),
- SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)),
+ SCR_JUMP ^ IFTRUE (DATA (SAVE_POINTERS)),
PADDR (save_dp),
- SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)),
+ SCR_JUMP ^ IFTRUE (DATA (RESTORE_POINTERS)),
PADDR (restore_dp),
- SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)),
+ SCR_JUMP ^ IFTRUE (DATA (EXTENDED_MESSAGE)),
PADDRH (msg_extended),
- SCR_JUMP ^ IFTRUE (DATA (M_NOOP)),
+ SCR_JUMP ^ IFTRUE (DATA (NOP)),
PADDR (clrack),
- SCR_JUMP ^ IFTRUE (DATA (M_REJECT)),
+ SCR_JUMP ^ IFTRUE (DATA (MESSAGE_REJECT)),
PADDRH (msg_reject),
- SCR_JUMP ^ IFTRUE (DATA (M_IGN_RESIDUE)),
+ SCR_JUMP ^ IFTRUE (DATA (IGNORE_WIDE_RESIDUE)),
PADDRH (msg_ign_residue),
/*
** Rest of the messages left as
*/
SCR_INT,
SIR_REJECT_SENT,
- SCR_LOAD_REG (scratcha, M_REJECT),
+ SCR_LOAD_REG (scratcha, MESSAGE_REJECT),
0,
}/*-------------------------< SETMSG >----------------------*/,{
SCR_COPY (1),
/*
** ... signal completion to the host
*/
-#ifdef SIMULATED_INTFLY
SCR_INT,
SIR_INTFLY,
-#else
- SCR_INT_FLY,
- 0,
-#endif
/*
** Auf zu neuen Schandtaten!
*/
SCR_INT,
SIR_DONE_OVERFLOW,
}/*------------------------< DONE_END >---------------------*/,{
-#ifdef SIMULATED_INTFLY
SCR_INT,
SIR_INTFLY,
-#else
- SCR_INT_FLY,
- 0,
-#endif
SCR_COPY (4),
RADDR (temp),
PADDR (done_pos),
*/
SCR_LOAD_REG (HS_REG, HS_DISCONNECT),
0,
- /*
- ** If QUIRK_AUTOSAVE is set,
- ** do an "save pointer" operation.
- */
- SCR_FROM_REG (QU_REG),
- 0,
- SCR_JUMP ^ IFFALSE (MASK (QUIRK_AUTOSAVE, QUIRK_AUTOSAVE)),
- PADDR (cleanup_ok),
- /*
- ** like SAVE_DP message:
- ** Copy TEMP register to SAVEP in header.
- */
- SCR_COPY (4),
- RADDR (temp),
- NADDR (header.savep),
SCR_JUMP,
PADDR (cleanup_ok),
/*
** If it was no ABORT message ...
*/
- SCR_JUMP ^ IFTRUE (DATA (M_ABORT)),
+ SCR_JUMP ^ IFTRUE (DATA (ABORT_TASK_SET)),
PADDRH (msg_out_abort),
/*
** ... wait for the next phase
/*
** ... else clear the message ...
*/
- SCR_LOAD_REG (scratcha, M_NOOP),
+ SCR_LOAD_REG (scratcha, NOP),
0,
SCR_COPY (4),
RADDR (scratcha),
**-----------------------------------------------------------
**
** ##===========< I=0; i<MAX_DONE >===========
-** || SCR_COPY (sizeof(ccb_p)),
+** || SCR_COPY (sizeof(struct ccb *),
** || NADDR (header.cp),
** || NADDR (ccb_done[i]),
** || SCR_CALL,
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[2]),
- SCR_JUMP ^ IFTRUE (DATA (M_X_WIDE_REQ)),
+ SCR_JUMP ^ IFTRUE (DATA (EXTENDED_WDTR)),
PADDRH (msg_wdtr),
/*
** unknown extended message
}/*-------------------------< SEND_WDTR >----------------*/,{
/*
- ** Send the M_X_WIDE_REQ
+ ** Send the EXTENDED_WDTR
*/
SCR_MOVE_ABS (4) ^ SCR_MSG_OUT,
NADDR (msgout),
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[2]),
- SCR_JUMP ^ IFTRUE (DATA (M_X_SYNC_REQ)),
+ SCR_JUMP ^ IFTRUE (DATA (EXTENDED_SDTR)),
PADDRH (msg_sdtr),
/*
** unknown extended message
}/*-------------------------< SEND_SDTR >-------------*/,{
/*
- ** Send the M_X_SYNC_REQ
+ ** Send the EXTENDED_SDTR
*/
SCR_MOVE_ABS (5) ^ SCR_MSG_OUT,
NADDR (msgout),
}/*-------------------------< RESET >----------------------*/,{
/*
- ** Send a M_RESET message if bad IDENTIFY
+ ** Send a TARGET_RESET message if bad IDENTIFY
** received on reselection.
*/
- SCR_LOAD_REG (scratcha, M_ABORT_TAG),
+ SCR_LOAD_REG (scratcha, ABORT_TASK),
0,
SCR_JUMP,
PADDRH (abort_resel),
/*
** Abort a wrong tag received on reselection.
*/
- SCR_LOAD_REG (scratcha, M_ABORT_TAG),
+ SCR_LOAD_REG (scratcha, ABORT_TASK),
0,
SCR_JUMP,
PADDRH (abort_resel),
/*
** Abort a reselection when no active CCB.
*/
- SCR_LOAD_REG (scratcha, M_ABORT),
+ SCR_LOAD_REG (scratcha, ABORT_TASK_SET),
0,
}/*-------------------------< ABORT_RESEL >----------------*/,{
SCR_COPY (1),
** Read the message, since we got it directly
** from the SCSI BUS data lines.
** Signal problem to C code for logging the event.
- ** Send a M_ABORT to clear all pending tasks.
+ ** Send an ABORT_TASK_SET to clear all pending tasks.
*/
SCR_INT,
SIR_RESEL_BAD_LUN,
/*
** We donnot have a task for that I_T_L.
** Signal problem to C code for logging the event.
- ** Send a M_ABORT message.
+ ** Send an ABORT_TASK_SET message.
*/
SCR_INT,
SIR_RESEL_BAD_I_T_L,
/*
** We donnot have a task that matches the tag.
** Signal problem to C code for logging the event.
- ** Send a M_ABORTTAG message.
+ ** Send an ABORT_TASK message.
*/
SCR_INT,
SIR_RESEL_BAD_I_T_L_Q,
** We donnot know the target that reselected us.
** Grab the first message if any (IDENTIFY).
** Signal problem to C code for logging the event.
- ** M_RESET message.
+ ** TARGET_RESET message.
*/
SCR_INT,
SIR_RESEL_BAD_TARGET,
for (i=0; i<MAX_START; i++) {
*p++ =SCR_CALL;
*p++ =PADDR (idle);
- };
+ }
- assert ((u_long)p == (u_long)&scrh->tryloop + sizeof (scrh->tryloop));
+ BUG_ON((u_long)p != (u_long)&scrh->tryloop + sizeof (scrh->tryloop));
#ifdef SCSI_NCR_CCB_DONE_SUPPORT
p = scrh->done_queue;
for (i = 0; i<MAX_DONE; i++) {
- *p++ =SCR_COPY (sizeof(ccb_p));
+ *p++ =SCR_COPY (sizeof(struct ccb *));
*p++ =NADDR (header.cp);
*p++ =NADDR (ccb_done[i]);
*p++ =SCR_CALL;
*p++ =PADDR (done_end);
}
- assert ((u_long)p ==(u_long)&scrh->done_queue+sizeof(scrh->done_queue));
+ BUG_ON((u_long)p != (u_long)&scrh->done_queue+sizeof(scrh->done_queue));
#endif /* SCSI_NCR_CCB_DONE_SUPPORT */
*p++ =PADDR (dispatch);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_IN;
*p++ =offsetof (struct dsb, data[i]);
- };
- assert ((u_long)p == (u_long)&scrh->hdata_in + sizeof (scrh->hdata_in));
+ }
+
+ BUG_ON((u_long)p != (u_long)&scrh->hdata_in + sizeof (scrh->hdata_in));
p = scr->data_in;
for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) {
*p++ =PADDR (dispatch);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_IN;
*p++ =offsetof (struct dsb, data[i]);
- };
- assert ((u_long)p == (u_long)&scr->data_in + sizeof (scr->data_in));
+ }
+
+ BUG_ON((u_long)p != (u_long)&scr->data_in + sizeof (scr->data_in));
p = scrh->hdata_out;
for (i=0; i<MAX_SCATTERH; i++) {
*p++ =PADDR (dispatch);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT;
*p++ =offsetof (struct dsb, data[i]);
- };
- assert ((u_long)p==(u_long)&scrh->hdata_out + sizeof (scrh->hdata_out));
+ }
+
+ BUG_ON((u_long)p != (u_long)&scrh->hdata_out + sizeof (scrh->hdata_out));
p = scr->data_out;
for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) {
*p++ =PADDR (dispatch);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT;
*p++ =offsetof (struct dsb, data[i]);
- };
+ }
- assert ((u_long)p == (u_long)&scr->data_out + sizeof (scr->data_out));
+ BUG_ON((u_long) p != (u_long)&scr->data_out + sizeof (scr->data_out));
}
/*==========================================================
*/
static void __init
-ncr_script_copy_and_bind (ncb_p np, ncrcmd *src, ncrcmd *dst, int len)
+ncr_script_copy_and_bind (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len)
{
ncrcmd opcode, new, old, tmp1, tmp2;
ncrcmd *start, *end;
if (opcode == 0) {
printk (KERN_ERR "%s: ERROR0 IN SCRIPT at %d.\n",
ncr_name(np), (int) (src-start-1));
- MDELAY (1000);
- };
+ mdelay(1000);
+ }
if (DEBUG_FLAGS & DEBUG_SCRIPT)
printk (KERN_DEBUG "%p: <%x>\n",
if ((tmp1 ^ tmp2) & 3) {
printk (KERN_ERR"%s: ERROR1 IN SCRIPT at %d.\n",
ncr_name(np), (int) (src-start-1));
- MDELAY (1000);
+ mdelay(1000);
}
/*
** If PREFETCH feature not enabled, remove
default:
relocs = 0;
break;
- };
+ }
if (relocs) {
while (relocs--) {
} else
*dst++ = cpu_to_scr(*src++);
- };
+ }
}
-/*==========================================================
-**
-**
-** Auto configuration: attach and init a host adapter.
-**
-**
-**==========================================================
-*/
-
/*
** Linux host data structure
-**
-** The script area is allocated in the host data structure
-** because kmalloc() returns NULL during scsi initialisations
-** with Linux 1.2.X
*/
struct host_data {
struct ncb *ncb;
};
-/*
-** Print something which allows to retrieve the controller type, unit,
-** target, lun concerned by a kernel message.
-*/
-
-static void PRINT_TARGET(ncb_p np, int target)
-{
- printk(KERN_INFO "%s-<%d,*>: ", ncr_name(np), target);
-}
+#define PRINT_ADDR(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg)
-static void PRINT_LUN(ncb_p np, int target, int lun)
+static void ncr_print_msg(struct ccb *cp, char *label, u_char *msg)
{
- printk(KERN_INFO "%s-<%d,%d>: ", ncr_name(np), target, lun);
-}
+ PRINT_ADDR(cp->cmd, "%s: ", label);
-static void PRINT_ADDR(Scsi_Cmnd *cmd)
-{
- struct host_data *host_data = (struct host_data *) cmd->device->host->hostdata;
- PRINT_LUN(host_data->ncb, cmd->device->id, cmd->device->lun);
+ spi_print_msg(msg);
+ printk("\n");
}
/*==========================================================
#define burst_length(bc) (!(bc))? 0 : 1 << (bc)
/*
- * Burst code from io register bits. Burst enable is ctest0 for c720,
- * ctest4 for others.
+ * Burst code from io register bits. Burst enable is ctest0 for c720
*/
-#define burst_code(dmode, ctest0, ctest4, ctest5) \
- (np->device_id == PSEUDO_720_ID) ? \
- (ctest0) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + 1 : \
- (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1
+#define burst_code(dmode, ctest0) \
+ (ctest0) & 0x80 ? 0 : (((dmode) & 0xc0) >> 6) + 1
/*
* Set initial io register bits from burst code.
*/
-static inline void ncr_init_burst(ncb_p np, u_char bc)
+static inline void ncr_init_burst(struct ncb *np, u_char bc)
{
- u_char *be = (np->device_id == PSEUDO_720_ID) ?
- &np->rv_ctest0 : &np->rv_ctest4;
+ u_char *be = &np->rv_ctest0;
*be &= ~0x80;
np->rv_dmode &= ~(0x3 << 6);
np->rv_ctest5 &= ~0x4;
if (!bc) {
*be |= 0x80;
- }
- else {
+ } else {
--bc;
np->rv_dmode |= ((bc & 0x3) << 6);
np->rv_ctest5 |= (bc & 0x4);
}
}
-#ifdef SCSI_NCR_NVRAM_SUPPORT
-
-/*
-** Get target set-up from Symbios format NVRAM.
-*/
-
-static void __init
-ncr_Symbios_setup_target(ncb_p np, int target, Symbios_nvram *nvram)
-{
- tcb_p tp = &np->target[target];
- Symbios_target *tn = &nvram->target[target];
-
- tp->usrsync = tn->sync_period ? (tn->sync_period + 3) / 4 : 255;
- tp->usrwide = tn->bus_width == 0x10 ? 1 : 0;
- tp->usrtags =
- (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? MAX_TAGS : 0;
-
- if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE))
- tp->usrflag |= UF_NODISC;
- if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME))
- tp->usrflag |= UF_NOSCAN;
-}
-
-/*
-** Get target set-up from Tekram format NVRAM.
-*/
-
-static void __init
-ncr_Tekram_setup_target(ncb_p np, int target, Tekram_nvram *nvram)
-{
- tcb_p tp = &np->target[target];
- struct Tekram_target *tn = &nvram->target[target];
- int i;
-
- if (tn->flags & TEKRAM_SYNC_NEGO) {
- i = tn->sync_index & 0xf;
- tp->usrsync = Tekram_sync[i];
- }
-
- tp->usrwide = (tn->flags & TEKRAM_WIDE_NEGO) ? 1 : 0;
-
- if (tn->flags & TEKRAM_TAGGED_COMMANDS) {
- tp->usrtags = 2 << nvram->max_tags_index;
- }
-
- if (!(tn->flags & TEKRAM_DISCONNECT_ENABLE))
- tp->usrflag = UF_NODISC;
-
- /* If any device does not support parity, we will not use this option */
- if (!(tn->flags & TEKRAM_PARITY_CHECK))
- np->rv_scntl0 &= ~0x0a; /* SCSI parity checking disabled */
-}
-#endif /* SCSI_NCR_NVRAM_SUPPORT */
-
-static int __init ncr_prepare_setting(ncb_p np, ncr_nvram *nvram)
+static void __init ncr_prepare_setting(struct ncb *np)
{
u_char burst_max;
u_long period;
/*
* Guess the frequency of the chip's clock.
*/
- if (np->features & (FE_ULTRA3 | FE_ULTRA2))
- np->clock_khz = 160000;
- else if (np->features & FE_ULTRA)
+ if (np->features & FE_ULTRA)
np->clock_khz = 80000;
else
np->clock_khz = 40000;
* Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2).
*/
- if (np->minsync < 25 && !(np->features & (FE_ULTRA|FE_ULTRA2)))
+ if (np->minsync < 25 && !(np->features & FE_ULTRA))
np->minsync = 25;
- else if (np->minsync < 12 && !(np->features & FE_ULTRA2))
- np->minsync = 12;
/*
* Maximum synchronous period factor supported by the chip.
np->rv_ctest3 = np->sv_ctest3;
np->rv_ctest4 = np->sv_ctest4;
np->rv_ctest5 = np->sv_ctest5;
- burst_max = burst_code(np->sv_dmode, np->sv_ctest0, np->sv_ctest4, np->sv_ctest5);
+ burst_max = burst_code(np->sv_dmode, np->sv_ctest0);
#else
/*
*/
burst_max = driver_setup.burst_max;
if (burst_max == 255)
- burst_max = burst_code(np->sv_dmode, np->sv_ctest0, np->sv_ctest4, np->sv_ctest5);
+ burst_max = burst_code(np->sv_dmode, np->sv_ctest0);
if (burst_max > 7)
burst_max = 7;
if (burst_max > np->maxburst)
if (driver_setup.scsi_parity)
np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */
-#ifdef SCSI_NCR_NVRAM_SUPPORT
- /*
- ** Get parity checking, host ID and verbose mode from NVRAM
- **/
- if (nvram) {
- switch(nvram->type) {
- case SCSI_NCR_TEKRAM_NVRAM:
- np->myaddr = nvram->data.Tekram.host_id & 0x0f;
- break;
- case SCSI_NCR_SYMBIOS_NVRAM:
- if (!(nvram->data.Symbios.flags & SYMBIOS_PARITY_ENABLE))
- np->rv_scntl0 &= ~0x0a;
- np->myaddr = nvram->data.Symbios.host_id & 0x0f;
- if (nvram->data.Symbios.flags & SYMBIOS_VERBOSE_MSGS)
- np->verbose += 1;
- break;
- }
- }
-#endif
/*
** Get SCSI addr of host adapter (set by bios?).
*/
** since a 100% safe algorithm is not possible.
*/
np->scsi_mode = SMODE_SE;
- if (np->features & FE_ULTRA2)
- np->scsi_mode = (np->sv_stest4 & SMODE);
- else if (np->features & FE_DIFF) {
+ if (np->features & FE_DIFF) {
switch(driver_setup.diff_support) {
case 4: /* Trust previous settings if present, then GPIO3 */
if (np->sv_scntl3) {
break;
}
case 3: /* SYMBIOS controllers report HVD through GPIO3 */
- if (nvram && nvram->type != SCSI_NCR_SYMBIOS_NVRAM)
- break;
if (INB(nc_gpreg) & 0x08)
break;
case 2: /* Set HVD unconditionally */
** that drive the LED directly.
** Also probe initial setting of GPIO0 as output.
*/
- if ((driver_setup.led_pin ||
- (nvram && nvram->type == SCSI_NCR_SYMBIOS_NVRAM)) &&
+ if ((driver_setup.led_pin) &&
!(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
np->features |= FE_LED0;
/*
** Configure targets according to driver setup.
- ** If NVRAM present get targets setup from NVRAM.
** Allow to override sync, wide and NOSCAN from
** boot command line.
*/
for (i = 0 ; i < MAX_TARGET ; i++) {
- tcb_p tp = &np->target[i];
-
- tp->usrsync = 255;
-#ifdef SCSI_NCR_NVRAM_SUPPORT
- if (nvram) {
- switch(nvram->type) {
- case SCSI_NCR_TEKRAM_NVRAM:
- ncr_Tekram_setup_target(np, i, &nvram->data.Tekram);
- break;
- case SCSI_NCR_SYMBIOS_NVRAM:
- ncr_Symbios_setup_target(np, i, &nvram->data.Symbios);
- break;
- }
- if (driver_setup.use_nvram & 0x2)
- tp->usrsync = driver_setup.default_sync;
- if (driver_setup.use_nvram & 0x4)
- tp->usrwide = driver_setup.max_wide;
- if (driver_setup.use_nvram & 0x8)
- tp->usrflag &= ~UF_NOSCAN;
- }
- else {
-#else
- if (1) {
-#endif
- tp->usrsync = driver_setup.default_sync;
- tp->usrwide = driver_setup.max_wide;
- tp->usrtags = MAX_TAGS;
- if (!driver_setup.disconnection)
- np->target[i].usrflag = UF_NODISC;
- }
+ struct tcb *tp = &np->target[i];
+
+ tp->usrsync = driver_setup.default_sync;
+ tp->usrwide = driver_setup.max_wide;
+ tp->usrtags = MAX_TAGS;
+ tp->period = 0xffff;
+ if (!driver_setup.disconnection)
+ np->target[i].usrflag = UF_NODISC;
}
/*
** Announce all that stuff to user.
*/
- i = nvram ? nvram->type : 0;
- printk(KERN_INFO "%s: %sID %d, Fast-%d%s%s\n", ncr_name(np),
- i == SCSI_NCR_SYMBIOS_NVRAM ? "Symbios format NVRAM, " :
- (i == SCSI_NCR_TEKRAM_NVRAM ? "Tekram format NVRAM, " : ""),
+ printk(KERN_INFO "%s: ID %d, Fast-%d%s%s\n", ncr_name(np),
np->myaddr,
np->minsync < 12 ? 40 : (np->minsync < 25 ? 20 : 10),
(np->rv_scntl0 & 0xa) ? ", Parity Checking" : ", NO Parity",
if (bootverbose && np->paddr2)
printk (KERN_INFO "%s: on-chip RAM at 0x%lx\n",
ncr_name(np), np->paddr2);
-
- return 0;
}
-/*
-** Host attach and initialisations.
+/*==========================================================
+**
+**
+** Done SCSI commands list management.
+**
+** We donnot enter the scsi_done() callback immediately
+** after a command has been seen as completed but we
+** insert it into a list which is flushed outside any kind
+** of driver critical section.
+** This allows to do minimal stuff under interrupt and
+** inside critical sections and to also avoid locking up
+** on recursive calls to driver entry points under SMP.
+** In fact, the only kernel point which is entered by the
+** driver with a driver lock set is kmalloc(GFP_ATOMIC)
+** that shall not reenter the driver under any circumstances,
+** AFAIK.
**
-** Allocate host data and ncb structure.
-** Request IO region and remap MMIO region.
-** Do chip initialization.
-** If all is OK, install interrupt handling and
-** start the timer daemon.
+**==========================================================
*/
-
-struct Scsi_Host * __init
-ncr_attach (Scsi_Host_Template *tpnt, int unit, struct ncr_device *device)
+static inline void ncr_queue_done_cmd(struct ncb *np, struct scsi_cmnd *cmd)
{
- struct host_data *host_data;
- ncb_p np = 0;
- struct Scsi_Host *instance = 0;
- u_long flags = 0;
- ncr_nvram *nvram = device->nvram;
- int i;
-
-#ifdef SCSI_NCR_PROC_INFO_SUPPORT
- tpnt->proc_info = ncr53c8xx_proc_info,
-#endif
- tpnt->info = ncr53c8xx_info;
- tpnt->queuecommand = ncr53c8xx_queue_command;
- tpnt->slave_configure = ncr53c8xx_slave_configure;
- tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset;
- tpnt->can_queue = SCSI_NCR_CAN_QUEUE;
- tpnt->this_id = 7;
- tpnt->sg_tablesize = SCSI_NCR_SG_TABLESIZE;
- tpnt->cmd_per_lun = SCSI_NCR_CMD_PER_LUN;
- tpnt->use_clustering = DISABLE_CLUSTERING;
+ unmap_scsi_data(np, cmd);
+ cmd->host_scribble = (char *) np->done_list;
+ np->done_list = cmd;
+}
- if(device->differential)
- driver_setup.diff_support = device->differential;
+static inline void ncr_flush_done_cmds(struct scsi_cmnd *lcmd)
+{
+ struct scsi_cmnd *cmd;
- printk(KERN_INFO "ncr53c%s-%d: rev 0x%x on bus %d device %d function %d irq %d\n",
- device->chip.name, unit, device->chip.revision_id,
- device->slot.bus, (device->slot.device_fn & 0xf8) >> 3,
- device->slot.device_fn & 7,
- device->slot.irq);
+ while (lcmd) {
+ cmd = lcmd;
+ lcmd = (struct scsi_cmnd *) cmd->host_scribble;
+ cmd->scsi_done(cmd);
+ }
+}
- /*
- ** Allocate host_data structure
- */
- if (!(instance = scsi_host_alloc(tpnt, sizeof(*host_data))))
- goto attach_error;
- host_data = (struct host_data *) instance->hostdata;
+/*==========================================================
+**
+**
+** Prepare the next negotiation message if needed.
+**
+** Fill in the part of message buffer that contains the
+** negotiation and the nego_status field of the CCB.
+** Returns the size of the message in bytes.
+**
+**
+**==========================================================
+*/
- /*
- ** Allocate the host control block.
- */
- np = __m_calloc_dma(device->dev, sizeof(struct ncb), "NCB");
- if (!np)
- goto attach_error;
- NCR_INIT_LOCK_NCB(np);
- np->dev = device->dev;
- np->p_ncb = vtobus(np);
- host_data->ncb = np;
- /*
- ** Allocate the default CCB.
- */
- np->ccb = (ccb_p) m_calloc_dma(sizeof(struct ccb), "CCB");
- if (!np->ccb)
- goto attach_error;
+static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr)
+{
+ struct tcb *tp = &np->target[cp->target];
+ int msglen = 0;
+ int nego = 0;
+ struct scsi_target *starget = tp->starget;
- /*
- ** Store input informations in the host data structure.
- */
- strlcpy(np->chip_name, device->chip.name, sizeof(np->chip_name));
- np->unit = unit;
- np->verbose = driver_setup.verbose;
- sprintf(np->inst_name, "ncr53c%s-%d", np->chip_name, np->unit);
- np->device_id = device->chip.device_id;
- np->revision_id = device->chip.revision_id;
- np->bus = device->slot.bus;
- np->device_fn = device->slot.device_fn;
- np->features = device->chip.features;
- np->clock_divn = device->chip.nr_divisor;
- np->maxoffs = device->chip.offset_max;
- np->maxburst = device->chip.burst_max;
- np->myaddr = device->host_id;
+ /* negotiate wide transfers ? */
+ if (!tp->widedone) {
+ if (spi_support_wide(starget)) {
+ nego = NS_WIDE;
+ } else
+ tp->widedone=1;
+ }
- /*
- ** Allocate SCRIPTS areas.
- */
- np->script0 = (struct script *)
- m_calloc_dma(sizeof(struct script), "SCRIPT");
- if (!np->script0)
- goto attach_error;
- np->scripth0 = (struct scripth *)
- m_calloc_dma(sizeof(struct scripth), "SCRIPTH");
- if (!np->scripth0)
- goto attach_error;
+ /* negotiate synchronous transfers? */
+ if (!nego && !tp->period) {
+ if (spi_support_sync(starget)) {
+ nego = NS_SYNC;
+ } else {
+ tp->period =0xffff;
+ dev_info(&starget->dev, "target did not report SYNC.\n");
+ }
+ }
- /*
- ** Initialize timer structure
- **
- */
- init_timer(&np->timer);
- np->timer.data = (unsigned long) np;
- np->timer.function = ncr53c8xx_timeout;
+ switch (nego) {
+ case NS_SYNC:
+ msglen += spi_populate_sync_msg(msgptr + msglen,
+ tp->maxoffs ? tp->minsync : 0, tp->maxoffs);
+ break;
+ case NS_WIDE:
+ msglen += spi_populate_width_msg(msgptr + msglen, tp->usrwide);
+ break;
+ }
- /*
- ** Try to map the controller chip to
- ** virtual and physical memory.
- */
+ cp->nego_status = nego;
- np->paddr = device->slot.base;
- np->paddr2 = (np->features & FE_RAM)? device->slot.base_2 : 0;
+ if (nego) {
+ tp->nego_cp = cp;
+ if (DEBUG_FLAGS & DEBUG_NEGO) {
+ ncr_print_msg(cp, nego == NS_WIDE ?
+ "wide msgout":"sync_msgout", msgptr);
+ }
+ }
-#ifndef SCSI_NCR_IOMAPPED
- if(device->slot.base_v)
- np->vaddr = device->slot.base_v;
- else
- np->vaddr = (unsigned long)ioremap(device->slot.base_c, 128);
+ return msglen;
+}
- if (!np->vaddr) {
- printk(KERN_ERR
- "%s: can't map memory mapped IO region\n",ncr_name(np));
- goto attach_error;
- }
- else
- if (bootverbose > 1)
- printk(KERN_INFO
- "%s: using memory mapped IO at virtual address 0x%lx\n", ncr_name(np), (u_long) np->vaddr);
- /*
- ** Make the controller's registers available.
- ** Now the INB INW INL OUTB OUTW OUTL macros
- ** can be used safely.
- */
- np->reg = (struct ncr_reg*) np->vaddr;
+/*==========================================================
+**
+**
+** Start execution of a SCSI command.
+** This is called from the generic SCSI driver.
+**
+**
+**==========================================================
+*/
+static int ncr_queue_command (struct ncb *np, struct scsi_cmnd *cmd)
+{
+ struct scsi_device *sdev = cmd->device;
+ struct tcb *tp = &np->target[sdev->id];
+ struct lcb *lp = tp->lp[sdev->lun];
+ struct ccb *cp;
-#else
+ int segments;
+ u_char idmsg, *msgptr;
+ u32 msglen;
+ int direction;
+ u32 lastp, goalp;
- /*
- ** Try to map the controller chip into iospace.
+ /*---------------------------------------------
+ **
+ ** Some shortcuts ...
+ **
+ **---------------------------------------------
*/
-
- np->base_io = device->slot.io_port;
-#endif /* !defined SCSI_NCR_IOMAPPED */
-
-#ifdef SCSI_NCR_NVRAM_SUPPORT
- if (nvram) {
- switch(nvram->type) {
- case SCSI_NCR_SYMBIOS_NVRAM:
-#ifdef SCSI_NCR_DEBUG_NVRAM
- ncr_display_Symbios_nvram(&nvram->data.Symbios);
-#endif
- break;
- case SCSI_NCR_TEKRAM_NVRAM:
-#ifdef SCSI_NCR_DEBUG_NVRAM
- ncr_display_Tekram_nvram(&nvram->data.Tekram);
-#endif
- break;
- default:
- nvram = 0;
-#ifdef SCSI_NCR_DEBUG_NVRAM
- printk(KERN_DEBUG "%s: NVRAM: None or invalid data.\n", ncr_name(np));
-#endif
- }
- }
-#endif
-
- /*
- ** Do chip dependent initialization.
- */
- (void)ncr_prepare_setting(np, nvram);
-
- if (np->paddr2 && sizeof(struct script) > 4096) {
- np->paddr2 = 0;
- printk(KERN_WARNING "%s: script too large, NOT using on chip RAM.\n",
- ncr_name(np));
- }
-
- /*
- ** Fill Linux host instance structure
- */
- instance->max_channel = 0;
- instance->this_id = np->myaddr;
- instance->max_id = np->maxwide ? 16 : 8;
- instance->max_lun = SCSI_NCR_MAX_LUN;
-#ifndef SCSI_NCR_IOMAPPED
- instance->base = (unsigned long) np->reg;
-#endif
- instance->irq = device->slot.irq;
- instance->unique_id = device->slot.io_port;
- instance->io_port = device->slot.io_port;
- instance->n_io_port = 128;
- instance->dma_channel = 0;
- instance->cmd_per_lun = MAX_TAGS;
- instance->can_queue = (MAX_START-4);
- scsi_set_device(instance, device->dev);
-
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
- np->check_integrity = 0;
- instance->check_integrity = 0;
-
-#ifdef SCSI_NCR_ENABLE_INTEGRITY_CHECK
- if ( !(driver_setup.bus_check & 0x04) ) {
- np->check_integrity = 1;
- instance->check_integrity = 1;
- }
-#endif
-#endif
- /*
- ** Patch script to physical addresses
- */
- ncr_script_fill (&script0, &scripth0);
-
- np->scripth = np->scripth0;
- np->p_scripth = vtobus(np->scripth);
-
- np->p_script = (np->paddr2) ? np->paddr2 : vtobus(np->script0);
-
- ncr_script_copy_and_bind (np, (ncrcmd *) &script0, (ncrcmd *) np->script0, sizeof(struct script));
- ncr_script_copy_and_bind (np, (ncrcmd *) &scripth0, (ncrcmd *) np->scripth0, sizeof(struct scripth));
- np->ccb->p_ccb = vtobus (np->ccb);
-
- /*
- ** Patch the script for LED support.
- */
-
- if (np->features & FE_LED0) {
- np->script0->idle[0] =
- cpu_to_scr(SCR_REG_REG(gpreg, SCR_OR, 0x01));
- np->script0->reselected[0] =
- cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe));
- np->script0->start[0] =
- cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe));
- }
-
- /*
- ** Look for the target control block of this nexus.
- ** For i = 0 to 3
- ** JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb)
- */
- for (i = 0 ; i < 4 ; i++) {
- np->jump_tcb[i].l_cmd =
- cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3))));
- np->jump_tcb[i].l_paddr =
- cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_target));
- }
-
- /*
- ** Reset chip.
- */
- ncr_chip_reset(np, 100);
-
- /*
- ** Now check the cache handling of the chipset.
- */
-
- if (ncr_snooptest (np)) {
- printk (KERN_ERR "CACHE INCORRECTLY CONFIGURED.\n");
- goto attach_error;
- };
-
- /*
- ** Install the interrupt handler.
- */
-
- np->irq = device->slot.irq;
-
- /*
- ** Initialize the fixed part of the default ccb.
- */
- ncr_init_ccb(np, np->ccb);
-
- /*
- ** After SCSI devices have been opened, we cannot
- ** reset the bus safely, so we do it here.
- ** Interrupt handler does the real work.
- ** Process the reset exception,
- ** if interrupts are not enabled yet.
- ** Then enable disconnects.
- */
- NCR_LOCK_NCB(np, flags);
- if (ncr_reset_scsi_bus(np, 0, driver_setup.settle_delay) != 0) {
- printk(KERN_ERR "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np));
-
- NCR_UNLOCK_NCB(np, flags);
- goto attach_error;
- }
- ncr_exception (np);
-
- np->disc = 1;
-
- /*
- ** The middle-level SCSI driver does not
- ** wait for devices to settle.
- ** Wait synchronously if more than 2 seconds.
- */
- if (driver_setup.settle_delay > 2) {
- printk(KERN_INFO "%s: waiting %d seconds for scsi devices to settle...\n",
- ncr_name(np), driver_setup.settle_delay);
- MDELAY (1000 * driver_setup.settle_delay);
- }
-
- /*
- ** Now let the generic SCSI driver
- ** look for the SCSI devices on the bus ..
- */
-
- /*
- ** start the timeout daemon
- */
- np->lasttime=0;
- ncr_timeout (np);
-
- /*
- ** use SIMPLE TAG messages by default
- */
-#ifdef SCSI_NCR_ALWAYS_SIMPLE_TAG
- np->order = M_SIMPLE_TAG;
-#endif
-
- NCR_UNLOCK_NCB(np, flags);
-
- return instance;
-
-attach_error:
- if (!instance) return NULL;
- printk(KERN_INFO "%s: detaching...\n", ncr_name(np));
- if (!np)
- goto unregister;
- if (np->scripth0)
- m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH");
- if (np->script0)
- m_free_dma(np->script0, sizeof(struct script), "SCRIPT");
- if (np->ccb)
- m_free_dma(np->ccb, sizeof(struct ccb), "CCB");
- m_free_dma(np, sizeof(struct ncb), "NCB");
-
-unregister:
- scsi_host_put(instance);
-
- return NULL;
-}
-
-
-/*==========================================================
-**
-**
-** Done SCSI commands list management.
-**
-** We donnot enter the scsi_done() callback immediately
-** after a command has been seen as completed but we
-** insert it into a list which is flushed outside any kind
-** of driver critical section.
-** This allows to do minimal stuff under interrupt and
-** inside critical sections and to also avoid locking up
-** on recursive calls to driver entry points under SMP.
-** In fact, the only kernel point which is entered by the
-** driver with a driver lock set is kmalloc(GFP_ATOMIC)
-** that shall not reenter the driver under any circumstances,
-** AFAIK.
-**
-**==========================================================
-*/
-static inline void ncr_queue_done_cmd(ncb_p np, Scsi_Cmnd *cmd)
-{
- unmap_scsi_data(np, cmd);
- cmd->host_scribble = (char *) np->done_list;
- np->done_list = cmd;
-}
-
-static inline void ncr_flush_done_cmds(Scsi_Cmnd *lcmd)
-{
- Scsi_Cmnd *cmd;
-
- while (lcmd) {
- cmd = lcmd;
- lcmd = (Scsi_Cmnd *) cmd->host_scribble;
- cmd->scsi_done(cmd);
- }
-}
-
-/*==========================================================
-**
-**
-** Prepare the next negotiation message for integrity check,
-** if needed.
-**
-** Fill in the part of message buffer that contains the
-** negotiation and the nego_status field of the CCB.
-** Returns the size of the message in bytes.
-**
-**
-**==========================================================
-*/
-
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
-static int ncr_ic_nego(ncb_p np, ccb_p cp, Scsi_Cmnd *cmd, u_char *msgptr)
-{
- tcb_p tp = &np->target[cp->target];
- int msglen = 0;
- int nego = 0;
- u_char no_increase;
-
- if (tp->inq_done) {
-
- if (!tp->ic_maximums_set) {
- tp->ic_maximums_set = 1;
-
- /* check target and host adapter capabilities */
- if ( (tp->inq_byte7 & INQ7_WIDE16) &&
- np->maxwide && tp->usrwide )
- tp->ic_max_width = 1;
- else
- tp->ic_max_width = 0;
-
- if ((tp->inq_byte7 & INQ7_SYNC) && tp->maxoffs) {
- tp->ic_min_sync = (tp->minsync < np->minsync) ?
- np->minsync : tp->minsync;
- }
- else
- tp->ic_min_sync = 255;
-
- tp->period = 1;
- tp->widedone = 1;
- }
-
- if (DEBUG_FLAGS & DEBUG_IC) {
- printk("%s: cmd->ic_nego %d, 1st byte 0x%2X\n",
- ncr_name(np), cmd->ic_nego, cmd->cmnd[0]);
- }
-
- /* First command from integrity check routine will request
- * a PPR message. Disable.
- */
- if ((cmd->ic_nego & NS_PPR) == NS_PPR)
- cmd->ic_nego &= ~NS_PPR;
- /* Previous command recorded a parity or an initiator
- * detected error condition. Force bus to narrow for this
- * target. Clear flag. Negotation on request sense.
- * Note: kernel forces 2 bus resets :o( but clears itself out.
- * Minor bug? in scsi_obsolete.c (ugly)
- */
- if (np->check_integ_par) {
- printk("%s: Parity Error. Target set to narrow.\n",
- ncr_name(np));
- tp->ic_max_width = 0;
- tp->widedone = tp->period = 0;
- }
-
- /* In case of a bus reset, ncr_negotiate will reset
- * the flags tp->widedone and tp->period to 0, forcing
- * a new negotiation.
- */
- no_increase = 0;
- if (tp->widedone == 0) {
- cmd->ic_nego = NS_WIDE;
- tp->widedone = 1;
- no_increase = 1;
- }
- else if (tp->period == 0) {
- cmd->ic_nego = NS_SYNC;
- tp->period = 1;
- no_increase = 1;
- }
-
- switch (cmd->ic_nego) {
- case NS_WIDE:
- /*
- ** negotiate wide transfers ?
- ** Do NOT negotiate if device only supports
- ** narrow.
- */
- if (tp->ic_max_width | np->check_integ_par) {
- nego = NS_WIDE;
-
- msgptr[msglen++] = M_EXTENDED;
- msgptr[msglen++] = 2;
- msgptr[msglen++] = M_X_WIDE_REQ;
- msgptr[msglen++] = cmd->ic_nego_width & tp->ic_max_width;
- }
- else
- cmd->ic_nego_width &= tp->ic_max_width;
-
- break;
-
- case NS_SYNC:
- /*
- ** negotiate synchronous transfers?
- ** Target must support sync transfers.
- **
- ** If period becomes longer than max, reset to async
- */
-
- if (tp->inq_byte7 & INQ7_SYNC) {
-
- nego = NS_SYNC;
-
- msgptr[msglen++] = M_EXTENDED;
- msgptr[msglen++] = 3;
- msgptr[msglen++] = M_X_SYNC_REQ;
-
- switch (cmd->ic_nego_sync) {
- case 2: /* increase the period */
- if (!no_increase) {
- if (tp->ic_min_sync <= 0x0A)
- tp->ic_min_sync = 0x0C;
- else if (tp->ic_min_sync <= 0x0C)
- tp->ic_min_sync = 0x19;
- else if (tp->ic_min_sync <= 0x19)
- tp->ic_min_sync *= 2;
- else {
- tp->ic_min_sync = 255;
- cmd->ic_nego_sync = 0;
- tp->maxoffs = 0;
- }
- }
- msgptr[msglen++] = tp->maxoffs?tp->ic_min_sync:0;
- msgptr[msglen++] = tp->maxoffs;
- break;
-
- case 1: /* nego. to maximum */
- msgptr[msglen++] = tp->maxoffs?tp->ic_min_sync:0;
- msgptr[msglen++] = tp->maxoffs;
- break;
-
- case 0: /* nego to async */
- default:
- msgptr[msglen++] = 0;
- msgptr[msglen++] = 0;
- break;
- };
- }
- else
- cmd->ic_nego_sync = 0;
- break;
-
- case NS_NOCHANGE:
- default:
- break;
- };
- };
-
- cp->nego_status = nego;
- np->check_integ_par = 0;
-
- if (nego) {
- tp->nego_cp = cp;
- if (DEBUG_FLAGS & DEBUG_NEGO) {
- ncr_print_msg(cp, nego == NS_WIDE ?
- "wide/narrow msgout": "sync/async msgout", msgptr);
- };
- };
-
- return msglen;
-}
-#endif /* SCSI_NCR_INTEGRITY_CHECKING */
-
-/*==========================================================
-**
-**
-** Prepare the next negotiation message if needed.
-**
-** Fill in the part of message buffer that contains the
-** negotiation and the nego_status field of the CCB.
-** Returns the size of the message in bytes.
-**
-**
-**==========================================================
-*/
-
-
-static int ncr_prepare_nego(ncb_p np, ccb_p cp, u_char *msgptr)
-{
- tcb_p tp = &np->target[cp->target];
- int msglen = 0;
- int nego = 0;
-
- if (tp->inq_done) {
-
- /*
- ** negotiate wide transfers ?
- */
-
- if (!tp->widedone) {
- if (tp->inq_byte7 & INQ7_WIDE16) {
- nego = NS_WIDE;
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
- if (tp->ic_done)
- tp->usrwide &= tp->ic_max_width;
-#endif
- } else
- tp->widedone=1;
-
- };
-
- /*
- ** negotiate synchronous transfers?
- */
-
- if (!nego && !tp->period) {
- if (tp->inq_byte7 & INQ7_SYNC) {
- nego = NS_SYNC;
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
- if ((tp->ic_done) &&
- (tp->minsync < tp->ic_min_sync))
- tp->minsync = tp->ic_min_sync;
-#endif
- } else {
- tp->period =0xffff;
- PRINT_TARGET(np, cp->target);
- printk ("target did not report SYNC.\n");
- };
- };
- };
-
- switch (nego) {
- case NS_SYNC:
- msgptr[msglen++] = M_EXTENDED;
- msgptr[msglen++] = 3;
- msgptr[msglen++] = M_X_SYNC_REQ;
- msgptr[msglen++] = tp->maxoffs ? tp->minsync : 0;
- msgptr[msglen++] = tp->maxoffs;
- break;
- case NS_WIDE:
- msgptr[msglen++] = M_EXTENDED;
- msgptr[msglen++] = 2;
- msgptr[msglen++] = M_X_WIDE_REQ;
- msgptr[msglen++] = tp->usrwide;
- break;
- };
-
- cp->nego_status = nego;
-
- if (nego) {
- tp->nego_cp = cp;
- if (DEBUG_FLAGS & DEBUG_NEGO) {
- ncr_print_msg(cp, nego == NS_WIDE ?
- "wide msgout":"sync_msgout", msgptr);
- };
- };
-
- return msglen;
-}
-
-
-
-/*==========================================================
-**
-**
-** Start execution of a SCSI command.
-** This is called from the generic SCSI driver.
-**
-**
-**==========================================================
-*/
-static int ncr_queue_command (ncb_p np, Scsi_Cmnd *cmd)
-{
-/* Scsi_Device *device = cmd->device; */
- tcb_p tp = &np->target[cmd->device->id];
- lcb_p lp = tp->lp[cmd->device->lun];
- ccb_p cp;
-
- int segments;
- u_char idmsg, *msgptr;
- u_int msglen;
- int direction;
- u32 lastp, goalp;
-
- /*---------------------------------------------
- **
- ** Some shortcuts ...
- **
- **---------------------------------------------
- */
- if ((cmd->device->id == np->myaddr ) ||
- (cmd->device->id >= MAX_TARGET) ||
- (cmd->device->lun >= MAX_LUN )) {
- return(DID_BAD_TARGET);
- }
+ if ((sdev->id == np->myaddr ) ||
+ (sdev->id >= MAX_TARGET) ||
+ (sdev->lun >= MAX_LUN )) {
+ return(DID_BAD_TARGET);
+ }
/*---------------------------------------------
**
}
if (DEBUG_FLAGS & DEBUG_TINY) {
- PRINT_ADDR(cmd);
- printk ("CMD=%x ", cmd->cmnd[0]);
+ PRINT_ADDR(cmd, "CMD=%x ", cmd->cmnd[0]);
}
/*---------------------------------------------------
**----------------------------------------------------
*/
if (np->settle_time && cmd->timeout_per_command >= HZ) {
- u_long tlimit = ktime_get(cmd->timeout_per_command - HZ);
- if (ktime_dif(np->settle_time, tlimit) > 0)
+ u_long tlimit = jiffies + cmd->timeout_per_command - HZ;
+ if (time_after(np->settle_time, tlimit))
np->settle_time = tlimit;
}
- if (np->settle_time || !(cp=ncr_get_ccb (np, cmd->device->id, cmd->device->lun))) {
+ if (np->settle_time || !(cp=ncr_get_ccb (np, cmd))) {
insert_into_waiting_list(np, cmd);
return(DID_OK);
}
**----------------------------------------------------
*/
- idmsg = M_IDENTIFY | cmd->device->lun;
+ idmsg = IDENTIFY(0, sdev->lun);
if (cp ->tag != NO_TAG ||
(cp != np->ccb && np->disc && !(tp->usrflag & UF_NODISC)))
** Force ordered tag if necessary to avoid timeouts
** and to preserve interactivity.
*/
- if (lp && ktime_exp(lp->tags_stime)) {
+ if (lp && time_after(jiffies, lp->tags_stime)) {
if (lp->tags_smap) {
- order = M_ORDERED_TAG;
+ order = ORDERED_QUEUE_TAG;
if ((DEBUG_FLAGS & DEBUG_TAGS)||bootverbose>2){
- PRINT_ADDR(cmd);
- printk("ordered tag forced.\n");
+ PRINT_ADDR(cmd,
+ "ordered tag forced.\n");
}
}
- lp->tags_stime = ktime_get(3*HZ);
+ lp->tags_stime = jiffies + 3*HZ;
lp->tags_smap = lp->tags_umap;
}
case 0x08: /* READ_SMALL (6) */
case 0x28: /* READ_BIG (10) */
case 0xa8: /* READ_HUGE (12) */
- order = M_SIMPLE_TAG;
+ order = SIMPLE_QUEUE_TAG;
break;
default:
- order = M_ORDERED_TAG;
+ order = ORDERED_QUEUE_TAG;
}
}
msgptr[msglen++] = order;
**----------------------------------------------------
*/
- direction = scsi_data_direction(cmd);
- if (direction != SCSI_DATA_NONE) {
- segments = ncr_scatter (np, cp, cp->cmd);
+ direction = cmd->sc_data_direction;
+ if (direction != DMA_NONE) {
+ segments = ncr_scatter(np, cp, cp->cmd);
if (segments < 0) {
ncr_free_ccb(np, cp);
return(DID_ERROR);
cp->nego_status = 0;
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
- if ((np->check_integrity && tp->ic_done) || !np->check_integrity) {
- if ((!tp->widedone || !tp->period) && !tp->nego_cp && lp) {
- msglen += ncr_prepare_nego (np, cp, msgptr + msglen);
- }
- }
- else if (np->check_integrity && (cmd->ic_in_progress)) {
- msglen += ncr_ic_nego (np, cp, cmd, msgptr + msglen);
- }
- else if (np->check_integrity && cmd->ic_complete) {
- /*
- * Midlayer signal to the driver that all of the scsi commands
- * for the integrity check have completed. Save the negotiated
- * parameters (extracted from sval and wval).
- */
-
- {
- u_char idiv;
- idiv = (tp->wval>>4) & 0x07;
- if ((tp->sval&0x1f) && idiv )
- tp->period = (((tp->sval>>5)+4)
- *div_10M[idiv-1])/np->clock_khz;
- else
- tp->period = 0xffff;
- }
- /*
- * tp->period contains 10 times the transfer period,
- * which itself is 4 * the requested negotiation rate.
- */
- if (tp->period <= 250) tp->ic_min_sync = 10;
- else if (tp->period <= 303) tp->ic_min_sync = 11;
- else if (tp->period <= 500) tp->ic_min_sync = 12;
- else
- tp->ic_min_sync = (tp->period + 40 - 1) / 40;
-
-
- /*
- * Negotiation for this target it complete.
- */
- tp->ic_max_width = (tp->wval & EWS) ? 1: 0;
- tp->ic_done = 1;
- tp->widedone = 1;
-
- printk("%s: Integrity Check Complete: \n", ncr_name(np));
-
- printk("%s: %s %s SCSI", ncr_name(np),
- (tp->sval&0x1f)?"SYNC":"ASYNC",
- tp->ic_max_width?"WIDE":"NARROW");
-
- if (tp->sval&0x1f) {
- u_long mbs = 10000 * (tp->ic_max_width + 1);
-
- printk(" %d.%d MB/s",
- (int) (mbs / tp->period), (int) (mbs % tp->period));
-
- printk(" (%d ns, %d offset)\n",
- tp->period/10, tp->sval&0x1f);
- }
- else
- printk(" %d MB/s. \n ", (tp->ic_max_width+1)*5);
- }
-#else
if ((!tp->widedone || !tp->period) && !tp->nego_cp && lp) {
msglen += ncr_prepare_nego (np, cp, msgptr + msglen);
}
-#endif /* SCSI_NCR_INTEGRITY_CHECKING */
/*----------------------------------------------------
**
**----------------------------------------------------
*/
if (!cp->data_len)
- direction = SCSI_DATA_NONE;
+ direction = DMA_NONE;
/*
- ** If data direction is UNKNOWN, speculate DATA_READ
- ** but prepare alternate pointers for WRITE in case
+ ** If data direction is BIDIRECTIONAL, speculate FROM_DEVICE
+ ** but prepare alternate pointers for TO_DEVICE in case
** of our speculation will be just wrong.
** SCRIPTS will swap values if needed.
*/
switch(direction) {
- case SCSI_DATA_UNKNOWN:
- case SCSI_DATA_WRITE:
+ case DMA_BIDIRECTIONAL:
+ case DMA_TO_DEVICE:
goalp = NCB_SCRIPT_PHYS (np, data_out2) + 8;
if (segments <= MAX_SCATTERL)
lastp = goalp - 8 - (segments * 16);
lastp = NCB_SCRIPTH_PHYS (np, hdata_out2);
lastp -= (segments - MAX_SCATTERL) * 16;
}
- if (direction != SCSI_DATA_UNKNOWN)
+ if (direction != DMA_BIDIRECTIONAL)
break;
cp->phys.header.wgoalp = cpu_to_scr(goalp);
cp->phys.header.wlastp = cpu_to_scr(lastp);
/* fall through */
- case SCSI_DATA_READ:
+ case DMA_FROM_DEVICE:
goalp = NCB_SCRIPT_PHYS (np, data_in2) + 8;
if (segments <= MAX_SCATTERL)
lastp = goalp - 8 - (segments * 16);
}
break;
default:
- case SCSI_DATA_NONE:
+ case DMA_NONE:
lastp = goalp = NCB_SCRIPT_PHYS (np, no_data);
break;
}
cp->phys.header.lastp = cpu_to_scr(lastp);
cp->phys.header.goalp = cpu_to_scr(goalp);
- if (direction == SCSI_DATA_UNKNOWN)
+ if (direction == DMA_BIDIRECTIONAL)
cp->phys.header.savep =
cpu_to_scr(NCB_SCRIPTH_PHYS (np, data_io));
else
/*
** select
*/
- cp->phys.select.sel_id = cmd->device->id;
+ cp->phys.select.sel_id = sdev_id(sdev);
cp->phys.select.sel_scntl3 = tp->wval;
cp->phys.select.sel_sxfer = tp->sval;
/*
/*
** status
*/
- cp->actualquirks = tp->quirks;
+ cp->actualquirks = 0;
cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
cp->scsi_status = S_ILLEGAL;
cp->parity_status = 0;
**----------------------------------------------------
*/
- /*
- ** activate this job.
- */
+ /* activate this job. */
cp->magic = CCB_MAGIC;
/*
else
ncr_put_start_queue(np, cp);
- /*
- ** Command is successfully queued.
- */
+ /* Command is successfully queued. */
- return(DID_OK);
+ return DID_OK;
}
**==========================================================
*/
-static void ncr_start_next_ccb(ncb_p np, lcb_p lp, int maxn)
+static void ncr_start_next_ccb(struct ncb *np, struct lcb *lp, int maxn)
{
- XPT_QUEHEAD *qp;
- ccb_p cp;
+ struct list_head *qp;
+ struct ccb *cp;
if (lp->held_ccb)
return;
while (maxn-- && lp->queuedccbs < lp->queuedepth) {
- qp = xpt_remque_head(&lp->wait_ccbq);
+ qp = ncr_list_pop(&lp->wait_ccbq);
if (!qp)
break;
++lp->queuedccbs;
- cp = xpt_que_entry(qp, struct ccb, link_ccbq);
- xpt_insque_tail(qp, &lp->busy_ccbq);
+ cp = list_entry(qp, struct ccb, link_ccbq);
+ list_add_tail(qp, &lp->busy_ccbq);
lp->jump_ccb[cp->tag == NO_TAG ? 0 : cp->tag] =
cpu_to_scr(CCB_PHYS (cp, restart));
ncr_put_start_queue(np, cp);
}
}
-static void ncr_put_start_queue(ncb_p np, ccb_p cp)
+static void ncr_put_start_queue(struct ncb *np, struct ccb *cp)
{
- u_short qidx;
+ u16 qidx;
/*
** insert into start queue.
OUTB (nc_istat, SIGP);
}
-
-/*==========================================================
-**
-**
-** Start reset process.
-** If reset in progress do nothing.
-** The interrupt handler will reinitialize the chip.
-** The timeout handler will wait for settle_time before
-** clearing it and so resuming command processing.
-**
-**
-**==========================================================
-*/
-static void ncr_start_reset(ncb_p np)
-{
- if (!np->settle_time) {
- (void) ncr_reset_scsi_bus(np, 1, driver_setup.settle_delay);
- }
- }
-
-static int ncr_reset_scsi_bus(ncb_p np, int enab_int, int settle_delay)
+
+static int ncr_reset_scsi_bus(struct ncb *np, int enab_int, int settle_delay)
{
u32 term;
int retv = 0;
- np->settle_time = ktime_get(settle_delay * HZ);
+ np->settle_time = jiffies + settle_delay * HZ;
if (bootverbose > 1)
printk("%s: resetting, "
ncr_name(np), settle_delay);
ncr_chip_reset(np, 100);
- UDELAY (2000); /* The 895 needs time for the bus mode to settle */
+ udelay(2000); /* The 895 needs time for the bus mode to settle */
if (enab_int)
OUTW (nc_sien, RST);
/*
** properly set IRQ mode, prior to resetting the bus.
*/
OUTB (nc_stest3, TE);
- if (np->device_id != PSEUDO_720_ID)
- OUTB (nc_dcntl, (np->rv_dcntl & IRQM));
OUTB (nc_scntl1, CRST);
- UDELAY (200);
+ udelay(200);
if (!driver_setup.bus_check)
goto out;
return retv;
}
+/*
+ * Start reset process.
+ * If reset in progress do nothing.
+ * The interrupt handler will reinitialize the chip.
+ * The timeout handler will wait for settle_time before
+ * clearing it and so resuming command processing.
+ */
+static void ncr_start_reset(struct ncb *np)
+{
+ if (!np->settle_time) {
+ ncr_reset_scsi_bus(np, 1, driver_setup.settle_delay);
+ }
+}
+
/*==========================================================
**
**
**
**==========================================================
*/
-static int ncr_reset_bus (ncb_p np, Scsi_Cmnd *cmd, int sync_reset)
+static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd, int sync_reset)
{
-/* Scsi_Device *device = cmd->device; */
- ccb_p cp;
+/* struct scsi_device *device = cmd->device; */
+ struct ccb *cp;
int found;
/*
return SUCCESS;
}
+#if 0 /* unused and broken.. */
/*==========================================================
**
**
**
**==========================================================
*/
-static int ncr_abort_command (ncb_p np, Scsi_Cmnd *cmd)
+static int ncr_abort_command (struct ncb *np, struct scsi_cmnd *cmd)
{
-/* Scsi_Device *device = cmd->device; */
- ccb_p cp;
+/* struct scsi_device *device = cmd->device; */
+ struct ccb *cp;
int found;
int retv;
return retv;
}
+#endif
-/*==========================================================
-**
-** Linux release module stuff.
-**
-** Called before unloading the module
-** Detach the host.
-** We have to free resources and halt the NCR chip
-**
-**==========================================================
-*/
-
-static int ncr_detach(ncb_p np)
+static void ncr_detach(struct ncb *np)
{
- ccb_p cp;
- tcb_p tp;
- lcb_p lp;
+ struct ccb *cp;
+ struct tcb *tp;
+ struct lcb *lp;
int target, lun;
int i;
char inst_name[16];
printk("%s: stopping the timer\n", ncr_name(np));
#endif
np->release_stage = 1;
- for (i = 50 ; i && np->release_stage != 2 ; i--) MDELAY (100);
+ for (i = 50 ; i && np->release_stage != 2 ; i--)
+ mdelay(100);
if (np->release_stage != 2)
printk("%s: the timer seems to be already stopped\n", ncr_name(np));
else np->release_stage = 2;
m_free_dma(cp, sizeof(*cp), "CCB");
}
- /*
- ** Free allocated tp(s)
- */
+ /* Free allocated tp(s) */
for (target = 0; target < MAX_TARGET ; target++) {
tp=&np->target[target];
m_free_dma(np, sizeof(struct ncb), "NCB");
printk("%s: host resources successfully released\n", inst_name);
-
- return 1;
}
/*==========================================================
**==========================================================
*/
-void ncr_complete (ncb_p np, ccb_p cp)
+void ncr_complete (struct ncb *np, struct ccb *cp)
{
- Scsi_Cmnd *cmd;
- tcb_p tp;
- lcb_p lp;
+ struct scsi_cmnd *cmd;
+ struct tcb *tp;
+ struct lcb *lp;
/*
** Sanity check
*/
if (cp == tp->nego_cp)
- tp->nego_cp = 0;
+ tp->nego_cp = NULL;
/*
** If auto-sense performed, change scsi status.
if (lp && lp->held_ccb) {
if (cp == lp->held_ccb) {
- xpt_que_splice(&lp->skip_ccbq, &lp->wait_ccbq);
- xpt_que_init(&lp->skip_ccbq);
- lp->held_ccb = 0;
+ list_splice_init(&lp->skip_ccbq, &lp->wait_ccbq);
+ lp->held_ccb = NULL;
}
}
*/
if (cp->parity_status > 1) {
- PRINT_ADDR(cmd);
- printk ("%d parity error(s).\n",cp->parity_status);
+ PRINT_ADDR(cmd, "%d parity error(s).\n",cp->parity_status);
}
/*
*/
if (cp->xerr_status != XE_OK) {
- PRINT_ADDR(cmd);
switch (cp->xerr_status) {
case XE_EXTRA_DATA:
- printk ("extraneous data discarded.\n");
+ PRINT_ADDR(cmd, "extraneous data discarded.\n");
break;
case XE_BAD_PHASE:
- printk ("invalid scsi phase (4/5).\n");
+ PRINT_ADDR(cmd, "invalid scsi phase (4/5).\n");
break;
default:
- printk ("extended error %d.\n", cp->xerr_status);
+ PRINT_ADDR(cmd, "extended error %d.\n",
+ cp->xerr_status);
break;
}
if (cp->host_status==HS_COMPLETE)
*/
if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) {
if (cp->host_status!=HS_COMPLETE || cp->scsi_status!=S_GOOD) {
- PRINT_ADDR(cmd);
- printk ("ERROR: cmd=%x host_status=%x scsi_status=%x\n",
- cmd->cmnd[0], cp->host_status, cp->scsi_status);
+ PRINT_ADDR(cmd, "ERROR: cmd=%x host_status=%x "
+ "scsi_status=%x\n", cmd->cmnd[0],
+ cp->host_status, cp->scsi_status);
}
}
if ( (cp->host_status == HS_COMPLETE)
&& (cp->scsi_status == S_GOOD ||
cp->scsi_status == S_COND_MET)) {
- /*
- ** All went well (GOOD status).
- ** CONDITION MET status is returned on
- ** `Pre-Fetch' or `Search data' success.
- */
+ /*
+ * All went well (GOOD status).
+ * CONDITION MET status is returned on
+ * `Pre-Fetch' or `Search data' success.
+ */
cmd->result = ScsiResult(DID_OK, cp->scsi_status);
/*
if (!lp)
ncr_alloc_lcb (np, cmd->device->id, cmd->device->lun);
- /*
- ** On standard INQUIRY response (EVPD and CmDt
- ** not set), setup logical unit according to
- ** announced capabilities (we need the 1rst 7 bytes).
- */
- if (cmd->cmnd[0] == 0x12 && !(cmd->cmnd[1] & 0x3) &&
- cmd->cmnd[4] >= 7 && !cmd->use_sg) {
- sync_scsi_data_for_cpu(np, cmd); /* SYNC the data */
- ncr_setup_lcb (np, cmd->device->id, cmd->device->lun,
- (char *) cmd->request_buffer);
- sync_scsi_data_for_device(np, cmd); /* SYNC the data */
- }
-
tp->bytes += cp->data_len;
tp->transfers ++;
if (lp->num_good >= 1000) {
lp->num_good = 0;
++lp->numtags;
- ncr_setup_tags (np, cmd->device->id, cmd->device->lun);
+ ncr_setup_tags (np, cmd->device);
}
}
} else if ((cp->host_status == HS_COMPLETE)
if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) {
u_char * p = (u_char*) & cmd->sense_buffer;
int i;
- PRINT_ADDR(cmd);
- printk ("sense data:");
+ PRINT_ADDR(cmd, "sense data:");
for (i=0; i<14; i++) printk (" %x", *p++);
printk (".\n");
}
/*
** Other protocol messes
*/
- PRINT_ADDR(cmd);
- printk ("COMMAND FAILED (%x %x) @%p.\n",
+ PRINT_ADDR(cmd, "COMMAND FAILED (%x %x) @%p.\n",
cp->host_status, cp->scsi_status, cp);
cmd->result = ScsiResult(DID_ERROR, cp->scsi_status);
if (tp->usrflag & UF_TRACE) {
u_char * p;
int i;
- PRINT_ADDR(cmd);
- printk (" CMD:");
+ PRINT_ADDR(cmd, " CMD:");
p = (u_char*) &cmd->cmnd[0];
for (i=0; i<cmd->cmd_len; i++) printk (" %x", *p++);
** requeue awaiting scsi commands for this lun.
*/
if (lp && lp->queuedccbs < lp->queuedepth &&
- !xpt_que_empty(&lp->wait_ccbq))
+ !list_empty(&lp->wait_ccbq))
ncr_start_next_ccb(np, lp, 2);
/*
** This CCB has been skipped by the NCR.
** Queue it in the correponding unit queue.
*/
-static void ncr_ccb_skipped(ncb_p np, ccb_p cp)
+static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp)
{
- tcb_p tp = &np->target[cp->target];
- lcb_p lp = tp->lp[cp->lun];
+ struct tcb *tp = &np->target[cp->target];
+ struct lcb *lp = tp->lp[cp->lun];
if (lp && cp != np->ccb) {
cp->host_status &= ~HS_SKIPMASK;
cp->start.schedule.l_paddr =
cpu_to_scr(NCB_SCRIPT_PHYS (np, select));
- xpt_remque(&cp->link_ccbq);
- xpt_insque_tail(&cp->link_ccbq, &lp->skip_ccbq);
+ list_move_tail(&cp->link_ccbq, &lp->skip_ccbq);
if (cp->queued) {
--lp->queuedccbs;
}
** The NCR has completed CCBs.
** Look at the DONE QUEUE if enabled, otherwise scan all CCBs
*/
-void ncr_wakeup_done (ncb_p np)
+void ncr_wakeup_done (struct ncb *np)
{
- ccb_p cp;
+ struct ccb *cp;
#ifdef SCSI_NCR_CCB_DONE_SUPPORT
int i, j;
if (!CCB_DONE_VALID(cp))
break;
- np->ccb_done[j] = (ccb_p) CCB_DONE_EMPTY;
+ np->ccb_done[j] = (struct ccb *)CCB_DONE_EMPTY;
np->scripth->done_queue[5*j + 4] =
cpu_to_scr(NCB_SCRIPT_PHYS (np, done_plug));
MEMORY_BARRIER();
/*
** Complete all active CCBs.
*/
-void ncr_wakeup (ncb_p np, u_long code)
+void ncr_wakeup (struct ncb *np, u_long code)
{
- ccb_p cp = np->ccb;
+ struct ccb *cp = np->ccb;
while (cp) {
if (cp->host_status != HS_IDLE) {
* at least. EA (dcntl bit 5) isn't set here as it is set once only in
* the _detect function.
*/
-static void ncr_chip_reset(ncb_p np, int delay)
+static void ncr_chip_reset(struct ncb *np, int delay)
{
OUTB (nc_istat, SRST);
- UDELAY (delay);
+ udelay(delay);
OUTB (nc_istat, 0 );
if (np->features & FE_EHP)
**==========================================================
*/
-void ncr_init (ncb_p np, int reset, char * msg, u_long code)
+void ncr_init (struct ncb *np, int reset, char * msg, u_long code)
{
int i;
if (reset) {
OUTB (nc_istat, SRST);
- UDELAY (100);
+ udelay(100);
}
else {
OUTB (nc_stest3, TE|CSF);
** Clear Done Queue
*/
for (i = 0; i < MAX_DONE; i++) {
- np->ccb_done[i] = (ccb_p) CCB_DONE_EMPTY;
+ np->ccb_done[i] = (struct ccb *)CCB_DONE_EMPTY;
np->scripth0->done_queue[5*i + 4] =
cpu_to_scr(NCB_SCRIPT_PHYS (np, done_end));
}
OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR);
OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID);
- /*
- ** For 895/6 enable SBMC interrupt and save current SCSI bus mode.
- */
- if (np->features & FE_ULTRA2) {
- OUTONW (nc_sien, SBMC);
- np->scsi_mode = INB (nc_stest4) & SMODE;
- }
-
- /*
- ** DEL 441 - 53C876 Rev 5 - Part Number 609-0392787/2788 - ITEM 2.
- ** Disable overlapped arbitration.
- ** All 896 chips are also affected by this errata.
- */
- if (np->device_id == PCI_DEVICE_ID_NCR_53C875)
- OUTB (nc_ctest0, (1<<5));
- else if (np->device_id == PCI_DEVICE_ID_NCR_53C896)
- OUTB (nc_ccntl0, DPR);
-
/*
** Fill in target structure.
** Reinitialize usrsync.
*/
for (i=0;i<MAX_TARGET;i++) {
- tcb_p tp = &np->target[i];
+ struct tcb *tp = &np->target[i];
tp->sval = 0;
tp->wval = np->rv_scntl3;
}
else
tp->usrsync = 255;
- };
+ }
if (tp->usrwide > np->maxwide)
tp->usrwide = np->maxwide;
- ncr_negotiate (np, tp);
}
/*
if (minsync > np->maxsync)
minsync = 255;
+ if (tp->maxoffs > np->maxoffs)
+ tp->maxoffs = np->maxoffs;
+
tp->minsync = minsync;
- tp->maxoffs = (minsync<255 ? np->maxoffs : 0);
+ tp->maxoffs = (minsync<255 ? tp->maxoffs : 0);
/*
** period=0: has to negotiate sync transfer
**==========================================================
*/
-static void ncr_getsync(ncb_p np, u_char sfac, u_char *fakp, u_char *scntl3p)
+static void ncr_getsync(struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p)
{
u_long clk = np->clock_khz; /* SCSI clock frequency in kHz */
int div = np->clock_divn; /* Number of divisors supported */
**==========================================================
*/
-static void ncr_set_sync_wide_status (ncb_p np, u_char target)
+static void ncr_set_sync_wide_status (struct ncb *np, u_char target)
{
- ccb_p cp;
- tcb_p tp = &np->target[target];
+ struct ccb *cp;
+ struct tcb *tp = &np->target[target];
/*
** set actual value and sync_status
*/
for (cp = np->ccb; cp; cp = cp->link_ccb) {
if (!cp->cmd) continue;
- if (cp->cmd->device->id != target) continue;
+ if (scmd_id(cp->cmd) != target) continue;
#if 0
cp->sync_status = tp->sval;
cp->wide_status = tp->wval;
#endif
cp->phys.select.sel_scntl3 = tp->wval;
cp->phys.select.sel_sxfer = tp->sval;
- };
+ }
}
/*==========================================================
**==========================================================
*/
-static void ncr_setsync (ncb_p np, ccb_p cp, u_char scntl3, u_char sxfer)
+static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer)
{
- Scsi_Cmnd *cmd;
- tcb_p tp;
+ struct scsi_cmnd *cmd = cp->cmd;
+ struct tcb *tp;
u_char target = INB (nc_sdid) & 0x0f;
u_char idiv;
- assert (cp && cp->cmd);
- if (!cp) return;
-
- cmd = cp->cmd;
- if (!cmd) return;
-
- assert (target == (cmd->device->id & 0xf));
+ BUG_ON(target != (scmd_id(cmd) & 0xf));
tp = &np->target[target];
else
tp->period = 0xffff;
- /*
- ** Stop there if sync parameters are unchanged
- */
- if (tp->sval == sxfer && tp->wval == scntl3) return;
+ /* Stop there if sync parameters are unchanged */
+ if (tp->sval == sxfer && tp->wval == scntl3)
+ return;
tp->sval = sxfer;
tp->wval = scntl3;
- /*
- ** Bells and whistles ;-)
- */
- PRINT_TARGET(np, target);
if (sxfer & 0x01f) {
- unsigned f10 = 100000 << (tp->widedone ? tp->widedone -1 : 0);
- unsigned mb10 = (f10 + tp->period/2) / tp->period;
- char *scsi;
-
- /*
- ** Disable extended Sreq/Sack filtering
- */
- if (tp->period <= 2000) OUTOFFB (nc_stest2, EXT);
-
- /*
- ** Bells and whistles ;-)
- */
- if (tp->period < 500) scsi = "FAST-40";
- else if (tp->period < 1000) scsi = "FAST-20";
- else if (tp->period < 2000) scsi = "FAST-10";
- else scsi = "FAST-5";
-
- printk ("%s %sSCSI %d.%d MB/s (%d ns, offset %d)\n", scsi,
- tp->widedone > 1 ? "WIDE " : "",
- mb10 / 10, mb10 % 10, tp->period / 10, sxfer & 0x1f);
- } else
- printk ("%sasynchronous.\n", tp->widedone > 1 ? "wide " : "");
+ /* Disable extended Sreq/Sack filtering */
+ if (tp->period <= 2000)
+ OUTOFFB(nc_stest2, EXT);
+ }
+
+ spi_display_xfer_agreement(tp->starget);
/*
** set actual value and sync_status
**==========================================================
*/
-static void ncr_setwide (ncb_p np, ccb_p cp, u_char wide, u_char ack)
+static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack)
{
- Scsi_Cmnd *cmd;
- u_short target = INB (nc_sdid) & 0x0f;
- tcb_p tp;
+ struct scsi_cmnd *cmd = cp->cmd;
+ u16 target = INB (nc_sdid) & 0x0f;
+ struct tcb *tp;
u_char scntl3;
u_char sxfer;
- assert (cp && cp->cmd);
- if (!cp) return;
-
- cmd = cp->cmd;
- if (!cmd) return;
-
- assert (target == (cmd->device->id & 0xf));
+ BUG_ON(target != (scmd_id(cmd) & 0xf));
tp = &np->target[target];
tp->widedone = wide+1;
** Bells and whistles ;-)
*/
if (bootverbose >= 2) {
- PRINT_TARGET(np, target);
- if (scntl3 & EWS)
- printk ("WIDE SCSI (16 bit) enabled.\n");
- else
- printk ("WIDE SCSI disabled.\n");
+ dev_info(&cmd->device->sdev_target->dev, "WIDE SCSI %sabled.\n",
+ (scntl3 & EWS) ? "en" : "dis");
}
/*
**==========================================================
*/
-static void ncr_setup_tags (ncb_p np, u_char tn, u_char ln)
+static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev)
{
- tcb_p tp = &np->target[tn];
- lcb_p lp = tp->lp[ln];
+ unsigned char tn = sdev->id, ln = sdev->lun;
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
u_char reqtags, maxdepth;
/*
** Just in case ...
*/
- if ((!tp) || (!lp))
+ if ((!tp) || (!lp) || !sdev)
return;
/*
** only devices capable of tagged commands
** only if enabled by user ..
*/
- if ((lp->inq_byte7 & INQ7_QUEUE) && lp->numtags > 1) {
+ if (sdev->tagged_supported && lp->numtags > 1) {
reqtags = lp->numtags;
} else {
reqtags = 1;
- };
+ }
/*
** Update max number of tags
** Announce change to user.
*/
if (bootverbose) {
- PRINT_LUN(np, tn, ln);
if (lp->usetags) {
- printk("tagged command queue depth set to %d\n", reqtags);
- }
- else {
- printk("tagged command queueing disabled\n");
+ dev_info(&sdev->sdev_gendev,
+ "tagged command queue depth set to %d\n",
+ reqtags);
+ } else {
+ dev_info(&sdev->sdev_gendev,
+ "tagged command queueing disabled\n");
}
}
}
-/*----------------------------------------------------
-**
-** handle user commands
-**
-**----------------------------------------------------
-*/
-
-#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
-
-static void ncr_usercmd (ncb_p np)
-{
- u_char t;
- tcb_p tp;
-
- switch (np->user.cmd) {
-
- case 0: return;
-
- case UC_SETSYNC:
- for (t=0; t<MAX_TARGET; t++) {
- if (!((np->user.target>>t)&1)) continue;
- tp = &np->target[t];
- tp->usrsync = np->user.data;
- ncr_negotiate (np, tp);
- };
- break;
-
- case UC_SETTAGS:
- for (t=0; t<MAX_TARGET; t++) {
- int ln;
- if (!((np->user.target>>t)&1)) continue;
- np->target[t].usrtags = np->user.data;
- for (ln = 0; ln < MAX_LUN; ln++) {
- lcb_p lp = np->target[t].lp[ln];
- if (!lp)
- continue;
- lp->maxtags = lp->numtags = np->user.data;
- ncr_setup_tags (np, t, ln);
- }
- };
- break;
-
- case UC_SETDEBUG:
-#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
- ncr_debug = np->user.data;
-#endif
- break;
-
- case UC_SETORDER:
- np->order = np->user.data;
- break;
-
- case UC_SETVERBOSE:
- np->verbose = np->user.data;
- break;
-
- case UC_SETWIDE:
- for (t=0; t<MAX_TARGET; t++) {
- u_long size;
- if (!((np->user.target>>t)&1)) continue;
- tp = &np->target[t];
- size = np->user.data;
- if (size > np->maxwide) size=np->maxwide;
- tp->usrwide = size;
- ncr_negotiate (np, tp);
- };
- break;
-
- case UC_SETFLAG:
- for (t=0; t<MAX_TARGET; t++) {
- if (!((np->user.target>>t)&1)) continue;
- tp = &np->target[t];
- tp->usrflag = np->user.data;
- };
- break;
- }
- np->user.cmd=0;
-}
-#endif
-
/*==========================================================
**
**
**----------------------------------------------------------
*/
-static void ncr_timeout (ncb_p np)
+static void ncr_timeout (struct ncb *np)
{
- u_long thistime = ktime_get(0);
+ u_long thistime = jiffies;
/*
** If release process in progress, let's go
return;
}
- np->timer.expires = ktime_get(SCSI_NCR_TIMER_INTERVAL);
+ np->timer.expires = jiffies + SCSI_NCR_TIMER_INTERVAL;
add_timer(&np->timer);
/*
**==========================================================
*/
-static void ncr_log_hard_error(ncb_p np, u_short sist, u_char dstat)
+static void ncr_log_hard_error(struct ncb *np, u16 sist, u_char dstat)
{
u32 dsp;
int script_ofs;
} else {
script_ofs = dsp;
script_size = 0;
- script_base = 0;
+ script_base = NULL;
script_name = "mem";
}
scr_to_cpu((int) *(ncrcmd *)(script_base + script_ofs)));
}
- printk ("%s: regdump:", ncr_name(np));
- for (i=0; i<16;i++)
+ printk ("%s: regdump:", ncr_name(np));
+ for (i=0; i<16;i++)
printk (" %02x", (unsigned)INB_OFF(i));
- printk (".\n");
+ printk (".\n");
}
/*============================================================
**============================================================
*/
-void ncr_exception (ncb_p np)
+void ncr_exception (struct ncb *np)
{
u_char istat, dstat;
- u_short sist;
+ u16 sist;
int i;
/*
istat = INB (nc_istat);
if (DEBUG_FLAGS & DEBUG_TINY) printk ("F ");
ncr_wakeup_done (np);
- };
+ }
if (!(istat & (SIP|DIP)))
return;
}
OUTONB_STD ();
return;
- };
+ }
/*========================================================
** Now, interrupts that need some fixing up.
if (sist & RST) {
ncr_init (np, 1, bootverbose ? "scsi reset" : NULL, HS_RESET);
return;
- };
+ }
if ((sist & STO) &&
!(dstat & (MDPE|BF|ABRT))) {
ncr_int_sto (np);
return;
- };
+ }
/*=========================================================
** Now, interrupts we are not able to recover cleanly.
**=========================================================
*/
- if (ktime_exp(np->regtime)) {
- np->regtime = ktime_get(10*HZ);
+ if (time_after(jiffies, np->regtime)) {
+ np->regtime = jiffies + 10*HZ;
for (i = 0; i<sizeof(np->regdump); i++)
((char*)&np->regdump)[i] = INB_OFF(i);
np->regdump.nc_dstat = dstat;
np->regdump.nc_sist = sist;
- };
+ }
ncr_log_hard_error(np, sist, dstat);
(dstat & (MDPE|BF|ABRT|IID))) {
ncr_start_reset(np);
return;
- };
+ }
if (sist & HTH) {
printk ("%s: handshake timeout\n", ncr_name(np));
ncr_start_reset(np);
return;
- };
+ }
if (sist & UDC) {
printk ("%s: unexpected disconnect\n", ncr_name(np));
OUTB (HS_PRT, HS_UNEXPECTED);
OUTL_DSP (NCB_SCRIPT_PHYS (np, cleanup));
return;
- };
+ }
/*=========================================================
** We just miss the cause of the interrupt. :(
**----------------------------------------------------------
*/
-void ncr_int_sto (ncb_p np)
+void ncr_int_sto (struct ncb *np)
{
u_long dsa;
- ccb_p cp;
+ struct ccb *cp;
if (DEBUG_FLAGS & DEBUG_TINY) printk ("T");
/*
if (cp) {
cp-> host_status = HS_SEL_TIMEOUT;
ncr_complete (np, cp);
- };
+ }
/*
** repair start queue and jump to start point.
**----------------------------------------------------------
*/
-static int ncr_int_sbmc (ncb_p np)
+static int ncr_int_sbmc (struct ncb *np)
{
u_char scsi_mode = INB (nc_stest4) & SMODE;
** Suspend command processing for 1 second and
** reinitialize all except the chip.
*/
- np->settle_time = ktime_get(1*HZ);
+ np->settle_time = jiffies + HZ;
ncr_init (np, 0, bootverbose ? "scsi mode change" : NULL, HS_RESET);
return 1;
}
**----------------------------------------------------------
*/
-static int ncr_int_par (ncb_p np)
+static int ncr_int_par (struct ncb *np)
{
u_char hsts = INB (HS_PRT);
u32 dbc = INL (nc_dbc);
if (!(dbc & 0xc0000000))
phase = (dbc >> 24) & 7;
if (phase == 7)
- msg = M_PARITY;
+ msg = MSG_PARITY_ERROR;
else
- msg = M_ID_ERROR;
+ msg = INITIATOR_ERROR;
-#ifdef SCSI_NCR_INTEGRITY_CHECKING
- /*
- ** Save error message. For integrity check use only.
- */
- if (np->check_integrity)
- np->check_integ_par = msg;
-#endif
/*
* If the NCR stopped on a MOVE ^ DATA_IN, we jump to a
**----------------------------------------------------------
*/
-static void ncr_int_ma (ncb_p np)
+static void ncr_int_ma (struct ncb *np)
{
u32 dbc;
u32 rest;
u32 *vdsp;
u32 oadr, olen;
u32 *tblp;
- ncrcmd *newcmd;
+ ncrcmd *newcmd;
u_char cmd, sbcl;
- ccb_p cp;
+ struct ccb *cp;
dsp = INL (nc_dsp);
dbc = INL (nc_dbc);
if ((cmd & 1) == 0) {
u_char ctest5, ss0, ss2;
- u_short delta;
+ u16 delta;
ctest5 = (np->rv_ctest5 & DFS) ? INB (nc_ctest5) : 0;
if (ctest5 & DFS)
ss2 = INB (nc_sstat2);
if (ss2 & OLF1) rest++;
if (ss2 & ORF1) rest++;
- };
+ }
if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE))
printk ("P%x%x RL=%d D=%d SS0=%x ", cmd&7, sbcl&7,
if (!(cmd & 6)) {
cp = np->header.cp;
if (CCB_PHYS(cp, phys) != dsa)
- cp = 0;
+ cp = NULL;
} else {
cp = np->ccb;
while (cp && (CCB_PHYS (cp, phys) != dsa))
** try to find the interrupted script command,
** and the address at which to continue.
*/
- vdsp = 0;
+ vdsp = NULL;
nxtdsp = 0;
if (dsp > np->p_script &&
dsp <= np->p_script + sizeof(struct script)) {
cp, np->header.cp,
(unsigned)dsp,
(unsigned)nxtdsp, vdsp, cmd);
- };
+ }
/*
** cp=0 means that the DSA does not point to a valid control
} else {
tblp = (u32 *) 0;
olen = scr_to_cpu(vdsp[0]) & 0xffffff;
- };
+ }
if (DEBUG_FLAGS & DEBUG_PHASE) {
printk ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n",
tblp,
(unsigned) olen,
(unsigned) oadr);
- };
+ }
/*
** check cmd against assumed interrupted script command.
*/
if (cmd != (scr_to_cpu(vdsp[0]) >> 24)) {
- PRINT_ADDR(cp->cmd);
- printk ("internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n",
- (unsigned)cmd, (unsigned)scr_to_cpu(vdsp[0]) >> 24);
+ PRINT_ADDR(cp->cmd, "internal error: cmd=%02x != %02x=(vdsp[0] "
+ ">> 24)\n", cmd, scr_to_cpu(vdsp[0]) >> 24);
goto reset_all;
}
*/
if (cmd & 0x06) {
- PRINT_ADDR(cp->cmd);
- printk ("phase change %x-%x %d@%08x resid=%d.\n",
+ PRINT_ADDR(cp->cmd, "phase change %x-%x %d@%08x resid=%d.\n",
cmd&7, sbcl&7, (unsigned)olen,
(unsigned)oadr, (unsigned)rest);
goto unexpected_phase;
- };
+ }
/*
** choose the correct patch area.
newcmd[3] = cpu_to_scr(nxtdsp);
if (DEBUG_FLAGS & DEBUG_PHASE) {
- PRINT_ADDR(cp->cmd);
- printk ("newcmd[%d] %x %x %x %x.\n",
+ PRINT_ADDR(cp->cmd, "newcmd[%d] %x %x %x %x.\n",
(int) (newcmd - cp->patch),
(unsigned)scr_to_cpu(newcmd[0]),
(unsigned)scr_to_cpu(newcmd[1]),
}
-static void ncr_sir_to_redo(ncb_p np, int num, ccb_p cp)
+static void ncr_sir_to_redo(struct ncb *np, int num, struct ccb *cp)
{
- Scsi_Cmnd *cmd = cp->cmd;
- tcb_p tp = &np->target[cmd->device->id];
- lcb_p lp = tp->lp[cmd->device->lun];
- XPT_QUEHEAD *qp;
- ccb_p cp2;
+ struct scsi_cmnd *cmd = cp->cmd;
+ struct tcb *tp = &np->target[cmd->device->id];
+ struct lcb *lp = tp->lp[cmd->device->lun];
+ struct list_head *qp;
+ struct ccb * cp2;
int disc_cnt = 0;
int busy_cnt = 0;
u32 startp;
** are before cp and busy ones after.
*/
if (lp) {
- qp = lp->busy_ccbq.blink;
+ qp = lp->busy_ccbq.prev;
while (qp != &lp->busy_ccbq) {
- cp2 = xpt_que_entry(qp, struct ccb, link_ccbq);
- qp = qp->blink;
+ cp2 = list_entry(qp, struct ccb, link_ccbq);
+ qp = qp->prev;
++busy_cnt;
if (cp2 == cp)
break;
if (!lp)
goto out;
if (bootverbose >= 1) {
- PRINT_ADDR(cmd);
- printk ("QUEUE FULL! %d busy, %d disconnected CCBs\n",
- busy_cnt, disc_cnt);
+ PRINT_ADDR(cmd, "QUEUE FULL! %d busy, %d disconnected "
+ "CCBs\n", busy_cnt, disc_cnt);
}
if (disc_cnt < lp->numtags) {
lp->numtags = disc_cnt > 2 ? disc_cnt : 2;
lp->num_good = 0;
- ncr_setup_tags (np, cmd->device->id, cmd->device->lun);
+ ncr_setup_tags (np, cmd->device);
}
/*
** Requeue the command to the start queue.
**
** identify message
*/
- cp->scsi_smsg2[0] = M_IDENTIFY | cmd->device->lun;
+ cp->scsi_smsg2[0] = IDENTIFY(0, cmd->device->lun);
cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg2));
cp->phys.smsg.size = cpu_to_scr(1);
/*
** sense data
*/
- bzero(cp->sense_buf, sizeof(cp->sense_buf));
+ memset(cp->sense_buf, 0, sizeof(cp->sense_buf));
cp->phys.sense.addr = cpu_to_scr(CCB_PHYS(cp,sense_buf[0]));
cp->phys.sense.size = cpu_to_scr(sizeof(cp->sense_buf));
/*
** Select without ATN for quirky devices.
*/
- if (tp->quirks & QUIRK_NOMSG)
+ if (cmd->device->select_no_atn)
cp->start.schedule.l_paddr =
cpu_to_scr(NCB_SCRIPTH_PHYS (np, select_no_atn));
**==========================================================
*/
-static int ncr_show_msg (u_char * msg)
-{
- u_char i;
- printk ("%x",*msg);
- if (*msg==M_EXTENDED) {
- for (i=1;i<8;i++) {
- if (i-1>msg[1]) break;
- printk ("-%x",msg[i]);
- };
- return (i+1);
- } else if ((*msg & 0xf0) == 0x20) {
- printk ("-%x",msg[1]);
- return (2);
- };
- return (1);
-}
-
-static void ncr_print_msg ( ccb_p cp, char *label, u_char *msg)
-{
- if (cp)
- PRINT_ADDR(cp->cmd);
- if (label)
- printk("%s: ", label);
-
- (void) ncr_show_msg (msg);
- printk(".\n");
-}
-
-void ncr_int_sir (ncb_p np)
+void ncr_int_sir (struct ncb *np)
{
u_char scntl3;
u_char chg, ofs, per, fak, wide;
u_char num = INB (nc_dsps);
- ccb_p cp=0;
+ struct ccb *cp=NULL;
u_long dsa = INL (nc_dsa);
u_char target = INB (nc_sdid) & 0x0f;
- tcb_p tp = &np->target[target];
+ struct tcb *tp = &np->target[target];
+ struct scsi_target *starget = tp->starget;
if (DEBUG_FLAGS & DEBUG_TINY) printk ("I#%d", num);
while (cp && (CCB_PHYS (cp, phys) != dsa))
cp = cp->link_ccb;
- assert (cp && cp == np->header.cp);
+ BUG_ON(!cp);
+ BUG_ON(cp != np->header.cp);
if (!cp || cp != np->header.cp)
goto out;
/*-----------------------------------------------------------------------------
**
** Was Sie schon immer ueber transfermode negotiation wissen wollten ...
+** ("Everything you've always wanted to know about transfer mode
+** negotiation")
**
** We try to negotiate sync and wide transfer only after
** a successful inquire command. We look at byte 7 of the
*/
if (DEBUG_FLAGS & DEBUG_NEGO) {
- PRINT_ADDR(cp->cmd);
- printk ("negotiation failed sir=%x status=%x.\n",
- num, cp->nego_status);
- };
+ PRINT_ADDR(cp->cmd, "negotiation failed sir=%x "
+ "status=%x.\n", num, cp->nego_status);
+ }
/*
** any error in negotiation:
switch (cp->nego_status) {
case NS_SYNC:
+ spi_period(starget) = 0;
+ spi_offset(starget) = 0;
ncr_setsync (np, cp, 0, 0xe0);
break;
case NS_WIDE:
+ spi_width(starget) = 0;
ncr_setwide (np, cp, 0, 0);
break;
- };
- np->msgin [0] = M_NOOP;
- np->msgout[0] = M_NOOP;
+ }
+ np->msgin [0] = NOP;
+ np->msgout[0] = NOP;
cp->nego_status = 0;
break;
case SIR_NEGO_SYNC:
- /*
- ** Synchronous request message received.
- */
-
if (DEBUG_FLAGS & DEBUG_NEGO) {
- PRINT_ADDR(cp->cmd);
- printk ("sync msgin: ");
- (void) ncr_show_msg (np->msgin);
- printk (".\n");
- };
-
- /*
- ** get requested values.
- */
+ ncr_print_msg(cp, "sync msgin", np->msgin);
+ }
chg = 0;
per = np->msgin[3];
** it CAN transfer synch.
*/
- if (ofs)
- tp->inq_byte7 |= INQ7_SYNC;
+ if (ofs && starget)
+ spi_support_sync(starget) = 1;
/*
** check values against driver limits.
}
if (DEBUG_FLAGS & DEBUG_NEGO) {
- PRINT_ADDR(cp->cmd);
- printk ("sync: per=%d scntl3=0x%x ofs=%d fak=%d chg=%d.\n",
- per, scntl3, ofs, fak, chg);
+ PRINT_ADDR(cp->cmd, "sync: per=%d scntl3=0x%x ofs=%d "
+ "fak=%d chg=%d.\n", per, scntl3, ofs, fak, chg);
}
if (INB (HS_PRT) == HS_NEGOTIATE) {
switch (cp->nego_status) {
case NS_SYNC:
- /*
- ** This was an answer message
- */
+ /* This was an answer message */
if (chg) {
- /*
- ** Answer wasn't acceptable.
- */
- ncr_setsync (np, cp, 0, 0xe0);
- OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad));
+ /* Answer wasn't acceptable. */
+ spi_period(starget) = 0;
+ spi_offset(starget) = 0;
+ ncr_setsync(np, cp, 0, 0xe0);
+ OUTL_DSP(NCB_SCRIPT_PHYS (np, msg_bad));
} else {
- /*
- ** Answer is ok.
- */
- ncr_setsync (np, cp, scntl3, (fak<<5)|ofs);
- OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack));
- };
+ /* Answer is ok. */
+ spi_period(starget) = per;
+ spi_offset(starget) = ofs;
+ ncr_setsync(np, cp, scntl3, (fak<<5)|ofs);
+ OUTL_DSP(NCB_SCRIPT_PHYS (np, clrack));
+ }
return;
case NS_WIDE:
- ncr_setwide (np, cp, 0, 0);
+ spi_width(starget) = 0;
+ ncr_setwide(np, cp, 0, 0);
break;
- };
- };
+ }
+ }
/*
** It was a request. Set value and
** prepare an answer message
*/
- ncr_setsync (np, cp, scntl3, (fak<<5)|ofs);
-
- np->msgout[0] = M_EXTENDED;
- np->msgout[1] = 3;
- np->msgout[2] = M_X_SYNC_REQ;
- np->msgout[3] = per;
- np->msgout[4] = ofs;
+ spi_period(starget) = per;
+ spi_offset(starget) = ofs;
+ ncr_setsync(np, cp, scntl3, (fak<<5)|ofs);
+ spi_populate_sync_msg(np->msgout, per, ofs);
cp->nego_status = NS_SYNC;
if (DEBUG_FLAGS & DEBUG_NEGO) {
- PRINT_ADDR(cp->cmd);
- printk ("sync msgout: ");
- (void) ncr_show_msg (np->msgout);
- printk (".\n");
+ ncr_print_msg(cp, "sync msgout", np->msgout);
}
if (!ofs) {
OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad));
return;
}
- np->msgin [0] = M_NOOP;
+ np->msgin [0] = NOP;
break;
** Wide request message received.
*/
if (DEBUG_FLAGS & DEBUG_NEGO) {
- PRINT_ADDR(cp->cmd);
- printk ("wide msgin: ");
- (void) ncr_show_msg (np->msgin);
- printk (".\n");
- };
+ ncr_print_msg(cp, "wide msgin", np->msgin);
+ }
/*
** get requested values.
** it CAN transfer wide.
*/
- if (wide)
- tp->inq_byte7 |= INQ7_WIDE16;
+ if (wide && starget)
+ spi_support_wide(starget) = 1;
/*
** check values against driver limits.
{chg = 1; wide = tp->usrwide;}
if (DEBUG_FLAGS & DEBUG_NEGO) {
- PRINT_ADDR(cp->cmd);
- printk ("wide: wide=%d chg=%d.\n", wide, chg);
+ PRINT_ADDR(cp->cmd, "wide: wide=%d chg=%d.\n", wide,
+ chg);
}
if (INB (HS_PRT) == HS_NEGOTIATE) {
** This was an answer message
*/
if (chg) {
- /*
- ** Answer wasn't acceptable.
- */
- ncr_setwide (np, cp, 0, 1);
+ /* Answer wasn't acceptable. */
+ spi_width(starget) = 0;
+ ncr_setwide(np, cp, 0, 1);
OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad));
} else {
- /*
- ** Answer is ok.
- */
- ncr_setwide (np, cp, wide, 1);
+ /* Answer is ok. */
+ spi_width(starget) = wide;
+ ncr_setwide(np, cp, wide, 1);
OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack));
- };
+ }
return;
case NS_SYNC:
- ncr_setsync (np, cp, 0, 0xe0);
+ spi_period(starget) = 0;
+ spi_offset(starget) = 0;
+ ncr_setsync(np, cp, 0, 0xe0);
break;
- };
- };
+ }
+ }
/*
** It was a request, set value and
** prepare an answer message
*/
- ncr_setwide (np, cp, wide, 1);
+ spi_width(starget) = wide;
+ ncr_setwide(np, cp, wide, 1);
+ spi_populate_width_msg(np->msgout, wide);
- np->msgout[0] = M_EXTENDED;
- np->msgout[1] = 2;
- np->msgout[2] = M_X_WIDE_REQ;
- np->msgout[3] = wide;
-
- np->msgin [0] = M_NOOP;
+ np->msgin [0] = NOP;
cp->nego_status = NS_WIDE;
if (DEBUG_FLAGS & DEBUG_NEGO) {
- PRINT_ADDR(cp->cmd);
- printk ("wide msgout: ");
- (void) ncr_show_msg (np->msgin);
- printk (".\n");
+ ncr_print_msg(cp, "wide msgout", np->msgin);
}
break;
case SIR_REJECT_RECEIVED:
/*-----------------------------------------------
**
- ** We received a M_REJECT message.
+ ** We received a MESSAGE_REJECT.
**
**-----------------------------------------------
*/
- PRINT_ADDR(cp->cmd);
- printk ("M_REJECT received (%x:%x).\n",
+ PRINT_ADDR(cp->cmd, "MESSAGE_REJECT received (%x:%x).\n",
(unsigned)scr_to_cpu(np->lastmsg), np->msgout[0]);
break;
**-----------------------------------------------
*/
- PRINT_ADDR(cp->cmd);
- printk ("M_REJECT sent for ");
- (void) ncr_show_msg (np->msgin);
- printk (".\n");
+ ncr_print_msg(cp, "MESSAGE_REJECT sent for", np->msgin);
break;
/*--------------------------------------------------------------------
**-----------------------------------------------
*/
- PRINT_ADDR(cp->cmd);
- printk ("M_IGN_RESIDUE received, but not yet implemented.\n");
+ PRINT_ADDR(cp->cmd, "IGNORE_WIDE_RESIDUE received, but not yet "
+ "implemented.\n");
break;
#if 0
case SIR_MISSING_SAVE:
**-----------------------------------------------
*/
- PRINT_ADDR(cp->cmd);
- printk ("M_DISCONNECT received, but datapointer not saved: "
- "data=%x save=%x goal=%x.\n",
+ PRINT_ADDR(cp->cmd, "DISCONNECT received, but datapointer "
+ "not saved: data=%x save=%x goal=%x.\n",
(unsigned) INL (nc_temp),
(unsigned) scr_to_cpu(np->header.savep),
(unsigned) scr_to_cpu(np->header.goalp));
break;
#endif
- };
+ }
out:
OUTONB_STD ();
**==========================================================
*/
-static ccb_p ncr_get_ccb (ncb_p np, u_char tn, u_char ln)
+static struct ccb *ncr_get_ccb(struct ncb *np, struct scsi_cmnd *cmd)
{
- tcb_p tp = &np->target[tn];
- lcb_p lp = tp->lp[ln];
+ u_char tn = cmd->device->id;
+ u_char ln = cmd->device->lun;
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
u_char tag = NO_TAG;
- ccb_p cp = (ccb_p) 0;
+ struct ccb *cp = NULL;
/*
** Lun structure available ?
*/
if (lp) {
- XPT_QUEHEAD *qp;
+ struct list_head *qp;
/*
** Keep from using more tags than we can handle.
*/
if (lp->usetags && lp->busyccbs >= lp->maxnxs)
- return (ccb_p) 0;
+ return NULL;
/*
** Allocate a new CCB if needed.
*/
- if (xpt_que_empty(&lp->free_ccbq))
+ if (list_empty(&lp->free_ccbq))
ncr_alloc_ccb(np, tn, ln);
- /*
- ** Tune tag mode if asked by user.
- */
- if (lp->queuedepth != lp->numtags) {
- ncr_setup_tags(np, tn, ln);
- }
-
/*
** Look for free CCB
*/
- qp = xpt_remque_head(&lp->free_ccbq);
+ qp = ncr_list_pop(&lp->free_ccbq);
if (qp) {
- cp = xpt_que_entry(qp, struct ccb, link_ccbq);
+ cp = list_entry(qp, struct ccb, link_ccbq);
if (cp->magic) {
- PRINT_LUN(np, tn, ln);
- printk ("ccb free list corrupted (@%p)\n", cp);
- cp = 0;
- }
- else {
- xpt_insque_tail(qp, &lp->wait_ccbq);
+ PRINT_ADDR(cmd, "ccb free list corrupted "
+ "(@%p)\n", cp);
+ cp = NULL;
+ } else {
+ list_add_tail(qp, &lp->wait_ccbq);
++lp->busyccbs;
}
}
tag = lp->cb_tags[lp->ia_tag];
}
else if (lp->actccbs > 0)
- return (ccb_p) 0;
+ return NULL;
}
/*
if (flags & SCSI_NOSLEEP) break;
if (tsleep ((caddr_t)cp, PRIBIO|PCATCH, "ncr", 0))
break;
- };
+ }
#endif
if (cp->magic)
- return ((ccb_p) 0);
+ return NULL;
cp->magic = 1;
cp->lun = ln;
if (DEBUG_FLAGS & DEBUG_TAGS) {
- PRINT_LUN(np, tn, ln);
- printk ("ccb @%p using tag %d.\n", cp, tag);
+ PRINT_ADDR(cmd, "ccb @%p using tag %d.\n", cp, tag);
}
return cp;
**==========================================================
*/
-static void ncr_free_ccb (ncb_p np, ccb_p cp)
+static void ncr_free_ccb (struct ncb *np, struct ccb *cp)
{
- tcb_p tp = &np->target[cp->target];
- lcb_p lp = tp->lp[cp->lun];
+ struct tcb *tp = &np->target[cp->target];
+ struct lcb *lp = tp->lp[cp->lun];
if (DEBUG_FLAGS & DEBUG_TAGS) {
- PRINT_LUN(np, cp->target, cp->lun);
- printk ("ccb @%p freeing tag %d.\n", cp, cp->tag);
+ PRINT_ADDR(cp->cmd, "ccb @%p freeing tag %d.\n", cp, cp->tag);
}
/*
*/
if (lp) {
- if (cp != np->ccb) {
- xpt_remque(&cp->link_ccbq);
- xpt_insque_head(&cp->link_ccbq, &lp->free_ccbq);
- }
+ if (cp != np->ccb)
+ list_move(&cp->link_ccbq, &lp->free_ccbq);
--lp->busyccbs;
if (cp->queued) {
--lp->queuedccbs;
**------------------------------------------------------------------------
**------------------------------------------------------------------------
*/
-static void ncr_init_ccb(ncb_p np, ccb_p cp)
+static void ncr_init_ccb(struct ncb *np, struct ccb *cp)
{
ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4);
cp->phys.header.cp = cp;
/*
- ** This allows xpt_remque to work for the default ccb.
+ ** This allows list_del to work for the default ccb.
*/
- xpt_que_init(&cp->link_ccbq);
+ INIT_LIST_HEAD(&cp->link_ccbq);
/*
** Initialyze the start and restart launch script.
**------------------------------------------------------------------------
**------------------------------------------------------------------------
*/
-static void ncr_alloc_ccb(ncb_p np, u_char tn, u_char ln)
+static void ncr_alloc_ccb(struct ncb *np, u_char tn, u_char ln)
{
- tcb_p tp = &np->target[tn];
- lcb_p lp = tp->lp[ln];
- ccb_p cp = 0;
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
+ struct ccb *cp = NULL;
/*
** Allocate memory for this CCB.
*/
lp->actccbs++;
np->actccbs++;
- bzero (cp, sizeof (*cp));
+ memset(cp, 0, sizeof (*cp));
ncr_init_ccb(np, cp);
/*
cp->link_ccb = np->ccb->link_ccb;
np->ccb->link_ccb = cp;
- xpt_insque_head(&cp->link_ccbq, &lp->free_ccbq);
- ncr_setup_tags (np, tn, ln);
+ list_add(&cp->link_ccbq, &lp->free_ccbq);
}
/*==========================================================
** It contains a SCRIPT that is called on target reselection.
**------------------------------------------------------------------------
*/
-static void ncr_init_tcb (ncb_p np, u_char tn)
+static void ncr_init_tcb (struct ncb *np, u_char tn)
{
- tcb_p tp = &np->target[tn];
+ struct tcb *tp = &np->target[tn];
ncrcmd copy_1 = np->features & FE_PFEN ? SCR_COPY(1) : SCR_COPY_F(1);
int th = tn & 3;
int i;
** These assert's should be moved at driver initialisations.
*/
#ifdef SCSI_NCR_BIG_ENDIAN
- assert (( (offsetof(struct ncr_reg, nc_sxfer) ^
- offsetof(struct tcb , sval )) &3) == 3);
- assert (( (offsetof(struct ncr_reg, nc_scntl3) ^
- offsetof(struct tcb , wval )) &3) == 3);
+ BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^
+ offsetof(struct tcb , sval )) &3) != 3);
+ BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^
+ offsetof(struct tcb , wval )) &3) != 3);
#else
- assert (( (offsetof(struct ncr_reg, nc_sxfer) ^
- offsetof(struct tcb , sval )) &3) == 0);
- assert (( (offsetof(struct ncr_reg, nc_scntl3) ^
- offsetof(struct tcb , wval )) &3) == 0);
+ BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^
+ offsetof(struct tcb , sval )) &3) != 0);
+ BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^
+ offsetof(struct tcb , wval )) &3) != 0);
#endif
}
** command has been successfully completed for this target/lun.
**------------------------------------------------------------------------
*/
-static lcb_p ncr_alloc_lcb (ncb_p np, u_char tn, u_char ln)
+static struct lcb *ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln)
{
- tcb_p tp = &np->target[tn];
- lcb_p lp = tp->lp[ln];
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4);
int lh = ln & 3;
lp = m_calloc_dma(sizeof(struct lcb), "LCB");
if (!lp)
goto fail;
- bzero(lp, sizeof(*lp));
+ memset(lp, 0, sizeof(*lp));
tp->lp[ln] = lp;
/*
/*
** Initialize the CCB queue headers.
*/
- xpt_que_init(&lp->free_ccbq);
- xpt_que_init(&lp->busy_ccbq);
- xpt_que_init(&lp->wait_ccbq);
- xpt_que_init(&lp->skip_ccbq);
+ INIT_LIST_HEAD(&lp->free_ccbq);
+ INIT_LIST_HEAD(&lp->busy_ccbq);
+ INIT_LIST_HEAD(&lp->wait_ccbq);
+ INIT_LIST_HEAD(&lp->skip_ccbq);
/*
** Set max CCBs to 1 and use the default 1 entry
** will play with CHANGE DEFINITION commands. :-)
**------------------------------------------------------------------------
*/
-static lcb_p ncr_setup_lcb (ncb_p np, u_char tn, u_char ln, u_char *inq_data)
+static struct lcb *ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev)
{
- tcb_p tp = &np->target[tn];
- lcb_p lp = tp->lp[ln];
- u_char inq_byte7;
+ unsigned char tn = sdev->id, ln = sdev->lun;
+ struct tcb *tp = &np->target[tn];
+ struct lcb *lp = tp->lp[ln];
- /*
- ** If no lcb, try to allocate it.
- */
+ /* If no lcb, try to allocate it. */
if (!lp && !(lp = ncr_alloc_lcb(np, tn, ln)))
goto fail;
- /*
- ** Get device quirks from a speciality table.
- */
- tp->quirks = ncr_lookup (inq_data);
- if (tp->quirks && bootverbose) {
- PRINT_LUN(np, tn, ln);
- printk ("quirks=%x.\n", tp->quirks);
- }
-
- /*
- ** Evaluate trustable target/unit capabilities.
- ** We only believe device version >= SCSI-2 that
- ** use appropriate response data format (2).
- ** But it seems that some CCS devices also
- ** support SYNC and I donnot want to frustrate
- ** anybody. ;-)
- */
- inq_byte7 = 0;
- if ((inq_data[2] & 0x7) >= 2 && (inq_data[3] & 0xf) == 2)
- inq_byte7 = inq_data[7];
- else if ((inq_data[2] & 0x7) == 1 && (inq_data[3] & 0xf) == 1)
- inq_byte7 = INQ7_SYNC;
-
- /*
- ** Throw away announced LUN capabilities if we are told
- ** that there is no real device supported by the logical unit.
- */
- if ((inq_data[0] & 0xe0) > 0x20 || (inq_data[0] & 0x1f) == 0x1f)
- inq_byte7 &= (INQ7_SYNC | INQ7_WIDE16);
-
- /*
- ** If user is wanting SYNC, force this feature.
- */
- if (driver_setup.force_sync_nego)
- inq_byte7 |= INQ7_SYNC;
-
- /*
- ** Prepare negotiation if SIP capabilities have changed.
- */
- tp->inq_done = 1;
- if ((inq_byte7 ^ tp->inq_byte7) & (INQ7_SYNC | INQ7_WIDE16)) {
- tp->inq_byte7 = inq_byte7;
- ncr_negotiate(np, tp);
- }
-
/*
** If unit supports tagged commands, allocate the
** CCB JUMP table if not yet.
*/
- if ((inq_byte7 & INQ7_QUEUE) && lp->jump_ccb == &lp->jump_ccb_0) {
+ if (sdev->tagged_supported && lp->jump_ccb == &lp->jump_ccb_0) {
int i;
lp->jump_ccb = m_calloc_dma(256, "JUMP_CCB");
if (!lp->jump_ccb) {
for (i = 0 ; i < MAX_TAGS ; i++)
lp->cb_tags[i] = i;
lp->maxnxs = MAX_TAGS;
- lp->tags_stime = ktime_get(3*HZ);
+ lp->tags_stime = jiffies + 3*HZ;
+ ncr_setup_tags (np, sdev);
}
- /*
- ** Adjust tagged queueing status if needed.
- */
- if ((inq_byte7 ^ lp->inq_byte7) & INQ7_QUEUE) {
- lp->inq_byte7 = inq_byte7;
- lp->numtags = lp->maxtags;
- ncr_setup_tags (np, tn, ln);
- }
fail:
return lp;
** sizes to the data segment array.
*/
-static int ncr_scatter(ncb_p np, ccb_p cp, Scsi_Cmnd *cmd)
+static int ncr_scatter_no_sglist(struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd)
+{
+ struct scr_tblmove *data = &cp->phys.data[MAX_SCATTER - 1];
+ int segment;
+
+ cp->data_len = cmd->request_bufflen;
+
+ if (cmd->request_bufflen) {
+ dma_addr_t baddr = map_scsi_single_data(np, cmd);
+ if (baddr) {
+ ncr_build_sge(np, data, baddr, cmd->request_bufflen);
+ segment = 1;
+ } else {
+ segment = -2;
+ }
+ } else {
+ segment = 0;
+ }
+
+ return segment;
+}
+
+static int ncr_scatter(struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd)
{
- struct scr_tblmove *data;
int segment = 0;
int use_sg = (int) cmd->use_sg;
- data = cp->phys.data;
cp->data_len = 0;
- if (!use_sg) {
- if (cmd->request_bufflen) {
- u_long baddr = map_scsi_single_data(np, cmd);
+ if (!use_sg)
+ segment = ncr_scatter_no_sglist(np, cp, cmd);
+ else if ((use_sg = map_scsi_sg_data(np, cmd)) > 0) {
+ struct scatterlist *scatter = (struct scatterlist *)cmd->request_buffer;
+ struct scr_tblmove *data;
- data = &data[MAX_SCATTER - 1];
- data[0].addr = cpu_to_scr(baddr);
- data[0].size = cpu_to_scr(cmd->request_bufflen);
- cp->data_len = cmd->request_bufflen;
- segment = 1;
+ if (use_sg > MAX_SCATTER) {
+ unmap_scsi_data(np, cmd);
+ return -1;
}
- }
- else if (use_sg <= MAX_SCATTER) {
- struct scatterlist *scatter = (struct scatterlist *)cmd->buffer;
- use_sg = map_scsi_sg_data(np, cmd);
- data = &data[MAX_SCATTER - use_sg];
+ data = &cp->phys.data[MAX_SCATTER - use_sg];
- while (segment < use_sg) {
- u_long baddr = scsi_sg_dma_address(&scatter[segment]);
- unsigned int len = scsi_sg_dma_len(&scatter[segment]);
+ for (segment = 0; segment < use_sg; segment++) {
+ dma_addr_t baddr = sg_dma_address(&scatter[segment]);
+ unsigned int len = sg_dma_len(&scatter[segment]);
- data[segment].addr = cpu_to_scr(baddr);
- data[segment].size = cpu_to_scr(len);
- cp->data_len += len;
- ++segment;
+ ncr_build_sge(np, &data[segment], baddr, len);
+ cp->data_len += len;
}
- }
- else {
- return -1;
+ } else {
+ segment = -2;
}
return segment;
**==========================================================
*/
-#ifndef SCSI_NCR_IOMAPPED
static int __init ncr_regtest (struct ncb* np)
{
register volatile u32 data;
printk ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
(unsigned) data);
return (0x10);
- };
+ }
return (0);
}
-#endif
static int __init ncr_snooptest (struct ncb* np)
{
u32 ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc;
int i, err=0;
-#ifndef SCSI_NCR_IOMAPPED
if (np->reg) {
- err |= ncr_regtest (np);
- if (err) return (err);
+ err |= ncr_regtest (np);
+ if (err)
+ return (err);
}
-#endif
- /*
- ** init
- */
+
+ /* init */
pc = NCB_SCRIPTH_PHYS (np, snooptest);
host_wr = 1;
ncr_wr = 2;
if (i>=NCR_SNOOP_TIMEOUT) {
printk ("CACHE TEST FAILED: timeout.\n");
return (0x20);
- };
+ }
/*
** Check termination position.
*/
(u_long) NCB_SCRIPTH_PHYS (np, snooptest), (u_long) pc,
(u_long) NCB_SCRIPTH_PHYS (np, snoopend) +8);
return (0x40);
- };
+ }
/*
** Show results.
*/
printk ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n",
(int) host_wr, (int) ncr_rd);
err |= 1;
- };
+ }
if (host_rd != ncr_wr) {
printk ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n",
(int) ncr_wr, (int) host_rd);
err |= 2;
- };
+ }
if (ncr_bk != ncr_wr) {
printk ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n",
(int) ncr_wr, (int) ncr_bk);
err |= 4;
- };
- return (err);
-}
-
-/*==========================================================
-**
-**
-** Device lookup.
-**
-** @GENSCSI@ should be integrated to scsiconf.c
-**
-**
-**==========================================================
-*/
-
-struct table_entry {
- char * manufacturer;
- char * model;
- char * version;
- u_long info;
-};
-
-static struct table_entry device_tab[] =
-{
-#if 0
- {"", "", "", QUIRK_NOMSG},
-#endif
- {"SONY", "SDT-5000", "3.17", QUIRK_NOMSG},
- {"WangDAT", "Model 2600", "01.7", QUIRK_NOMSG},
- {"WangDAT", "Model 3200", "02.2", QUIRK_NOMSG},
- {"WangDAT", "Model 1300", "02.4", QUIRK_NOMSG},
- {"", "", "", 0} /* catch all: must be last entry. */
-};
-
-static u_long ncr_lookup(char * id)
-{
- struct table_entry * p = device_tab;
- char *d, *r, c;
-
- for (;;p++) {
-
- d = id+8;
- r = p->manufacturer;
- while ((c=*r++)) if (c!=*d++) break;
- if (c) continue;
-
- d = id+16;
- r = p->model;
- while ((c=*r++)) if (c!=*d++) break;
- if (c) continue;
-
- d = id+32;
- r = p->version;
- while ((c=*r++)) if (c!=*d++) break;
- if (c) continue;
-
- return (p->info);
}
+ return (err);
}
/*==========================================================
**==========================================================
**
** Note: we have to return the correct value.
-** THERE IS NO SAVE DEFAULT VALUE.
+** THERE IS NO SAFE DEFAULT VALUE.
**
** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock.
** 53C860 and 53C875 rev. 1 support fast20 transfers but
/*
* Select NCR SCSI clock frequency
*/
-static void ncr_selectclock(ncb_p np, u_char scntl3)
+static void ncr_selectclock(struct ncb *np, u_char scntl3)
{
if (np->multiplier < 2) {
OUTB(nc_scntl3, scntl3);
if (np->multiplier > 2) { /* Poll bit 5 of stest4 for quadrupler */
int i = 20;
while (!(INB(nc_stest4) & LCKFRQ) && --i > 0)
- UDELAY (20);
+ udelay(20);
if (!i)
printk("%s: the chip cannot lock the frequency\n", ncr_name(np));
} else /* Wait 20 micro-seconds for doubler */
- UDELAY (20);
+ udelay(20);
OUTB(nc_stest3, HSC); /* Halt the scsi clock */
OUTB(nc_scntl3, scntl3);
OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */
/*
* calculate NCR SCSI clock frequency (in KHz)
*/
-static unsigned __init ncrgetfreq (ncb_p np, int gen)
+static unsigned __init ncrgetfreq (struct ncb *np, int gen)
{
unsigned ms = 0;
char count = 0;
OUTB (nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */
while (!(INW(nc_sist) & GEN) && ms++ < 100000) {
for (count = 0; count < 10; count ++)
- UDELAY (100); /* count ms */
+ udelay(100); /* count ms */
}
OUTB (nc_stime1, 0); /* disable general purpose timer */
/*
/*
* Get/probe NCR SCSI clock frequency
*/
-static void __init ncr_getclock (ncb_p np, int mult)
+static void __init ncr_getclock (struct ncb *np, int mult)
{
unsigned char scntl3 = INB(nc_scntl3);
unsigned char stest1 = INB(nc_stest1);
/*===================== LINUX ENTRY POINTS SECTION ==========================*/
-/*
-** Linux select queue depths function
-*/
+static int ncr53c8xx_slave_alloc(struct scsi_device *device)
+{
+ struct Scsi_Host *host = device->host;
+ struct ncb *np = ((struct host_data *) host->hostdata)->ncb;
+ struct tcb *tp = &np->target[device->id];
+ tp->starget = device->sdev_target;
+
+ return 0;
+}
-int ncr53c8xx_slave_configure(Scsi_Device *device)
+static int ncr53c8xx_slave_configure(struct scsi_device *device)
{
struct Scsi_Host *host = device->host;
- ncb_p np;
- tcb_p tp;
- lcb_p lp;
+ struct ncb *np = ((struct host_data *) host->hostdata)->ncb;
+ struct tcb *tp = &np->target[device->id];
+ struct lcb *lp = tp->lp[device->lun];
int numtags, depth_to_use;
- np = ((struct host_data *) host->hostdata)->ncb;
- tp = &np->target[device->id];
- lp = tp->lp[device->lun];
+ ncr_setup_lcb(np, device);
/*
** Select queue depth from driver setup.
** Since the queue depth is not tunable under Linux,
** we need to know this value in order not to
** announce stupid things to user.
+ **
+ ** XXX(hch): As of Linux 2.6 it certainly _is_ tunable..
+ ** In fact we just tuned it, or did I miss
+ ** something important? :)
*/
if (lp) {
lp->numtags = lp->maxtags = numtags;
lp->scdev_depth = depth_to_use;
}
- ncr_setup_tags (np, device->id, device->lun);
+ ncr_setup_tags (np, device);
#ifdef DEBUG_NCR53C8XX
printk("ncr53c8xx_select_queue_depth: host=%d, id=%d, lun=%d, depth=%d\n",
np->unit, device->id, device->lun, depth_to_use);
#endif
+ if (spi_support_sync(device->sdev_target) &&
+ !spi_initial_dv(device->sdev_target))
+ spi_dv_device(device);
return 0;
}
-/*
-** Linux entry point of queuecommand() function
-*/
-
-int ncr53c8xx_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *))
+static int ncr53c8xx_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
{
- ncb_p np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
+ struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
unsigned long flags;
int sts;
cmd->scsi_done = done;
cmd->host_scribble = NULL;
-#ifdef SCSI_NCR_DYNAMIC_DMA_MAPPING
cmd->__data_mapped = 0;
cmd->__data_mapping = 0;
-#endif
- NCR_LOCK_NCB(np, flags);
+ spin_lock_irqsave(&np->smp_lock, flags);
if ((sts = ncr_queue_command(np, cmd)) != DID_OK) {
cmd->result = ScsiResult(sts, 0);
printk("ncr53c8xx : command successfully queued\n");
#endif
- NCR_UNLOCK_NCB(np, flags);
+ spin_unlock_irqrestore(&np->smp_lock, flags);
if (sts != DID_OK) {
unmap_scsi_data(np, cmd);
done(cmd);
+ sts = 0;
}
return sts;
}
-/*
-** Linux entry point of the interrupt handler.
-** Since linux versions > 1.3.70, we trust the kernel for
-** passing the internal host descriptor as 'dev_id'.
-** Otherwise, we scan the host list and call the interrupt
-** routine for each host that uses this IRQ.
-*/
-
irqreturn_t ncr53c8xx_intr(int irq, void *dev_id, struct pt_regs * regs)
{
unsigned long flags;
struct Scsi_Host *shost = (struct Scsi_Host *)dev_id;
struct host_data *host_data = (struct host_data *)shost->hostdata;
- ncb_p np = host_data->ncb;
- Scsi_Cmnd *done_list;
+ struct ncb *np = host_data->ncb;
+ struct scsi_cmnd *done_list;
#ifdef DEBUG_NCR53C8XX
printk("ncr53c8xx : interrupt received\n");
if (DEBUG_FLAGS & DEBUG_TINY) printk ("[");
- NCR_LOCK_NCB(np, flags);
+ spin_lock_irqsave(&np->smp_lock, flags);
ncr_exception(np);
done_list = np->done_list;
- np->done_list = 0;
- NCR_UNLOCK_NCB(np, flags);
+ np->done_list = NULL;
+ spin_unlock_irqrestore(&np->smp_lock, flags);
if (DEBUG_FLAGS & DEBUG_TINY) printk ("]\n");
- if (done_list) {
- NCR_LOCK_SCSI_DONE(done_list->device->host, flags);
- ncr_flush_done_cmds(done_list);
- NCR_UNLOCK_SCSI_DONE(done_list->device->host, flags);
- }
+ if (done_list)
+ ncr_flush_done_cmds(done_list);
return IRQ_HANDLED;
}
-/*
-** Linux entry point of the timer handler
-*/
-
static void ncr53c8xx_timeout(unsigned long npref)
{
- ncb_p np = (ncb_p) npref;
- unsigned long flags;
- Scsi_Cmnd *done_list;
+ struct ncb *np = (struct ncb *) npref;
+ unsigned long flags;
+ struct scsi_cmnd *done_list;
- NCR_LOCK_NCB(np, flags);
- ncr_timeout((ncb_p) np);
- done_list = np->done_list;
- np->done_list = 0;
- NCR_UNLOCK_NCB(np, flags);
+ spin_lock_irqsave(&np->smp_lock, flags);
+ ncr_timeout(np);
+ done_list = np->done_list;
+ np->done_list = NULL;
+ spin_unlock_irqrestore(&np->smp_lock, flags);
- if (done_list) {
- NCR_LOCK_SCSI_DONE(done_list->device->host, flags);
- ncr_flush_done_cmds(done_list);
- NCR_UNLOCK_SCSI_DONE(done_list->device->host, flags);
- }
+ if (done_list)
+ ncr_flush_done_cmds(done_list);
}
-/*
-** Linux entry point of reset() function
-*/
-
-int ncr53c8xx_bus_reset(Scsi_Cmnd *cmd)
+static int ncr53c8xx_bus_reset(struct scsi_cmnd *cmd)
{
- ncb_p np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
+ struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
int sts;
unsigned long flags;
- Scsi_Cmnd *done_list;
-
- NCR_LOCK_NCB(np, flags);
+ struct scsi_cmnd *done_list;
/*
* If the mid-level driver told us reset is synchronous, it seems
* before returning SUCCESS.
*/
+ spin_lock_irqsave(&np->smp_lock, flags);
sts = ncr_reset_bus(np, cmd, 1);
done_list = np->done_list;
- np->done_list = 0;
- NCR_UNLOCK_NCB(np, flags);
+ np->done_list = NULL;
+ spin_unlock_irqrestore(&np->smp_lock, flags);
ncr_flush_done_cmds(done_list);
return sts;
}
-/*
-** Linux entry point of abort() function
-*/
-
-int ncr53c8xx_abort(Scsi_Cmnd *cmd)
+#if 0 /* unused and broken */
+static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
{
- ncb_p np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
+ struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
int sts;
unsigned long flags;
- Scsi_Cmnd *done_list;
+ struct scsi_cmnd *done_list;
#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
- printk("ncr53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n",
- cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout);
+ printk("ncr53c8xx_abort: pid=%lu serial_number=%ld\n",
+ cmd->pid, cmd->serial_number);
#else
printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid);
#endif
NCR_LOCK_NCB(np, flags);
-#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
- /*
- * We have to just ignore abort requests in some situations.
- */
- if (cmd->serial_number != cmd->serial_number_at_timeout) {
- sts = SCSI_ABORT_NOT_RUNNING;
- goto out;
- }
-#endif
-
sts = ncr_abort_command(np, cmd);
out:
done_list = np->done_list;
- np->done_list = 0;
+ np->done_list = NULL;
NCR_UNLOCK_NCB(np, flags);
ncr_flush_done_cmds(done_list);
return sts;
}
-
-
-int ncr53c8xx_release(struct Scsi_Host *host)
-{
-#ifdef DEBUG_NCR53C8XX
-printk("ncr53c8xx : release\n");
#endif
- ncr_detach(((struct host_data *) host->hostdata)->ncb);
-
- return 1;
-}
/*
#define next_wcmd host_scribble
-static void insert_into_waiting_list(ncb_p np, Scsi_Cmnd *cmd)
+static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd)
{
- Scsi_Cmnd *wcmd;
+ struct scsi_cmnd *wcmd;
#ifdef DEBUG_WAITING_LIST
printk("%s: cmd %lx inserted into waiting list\n", ncr_name(np), (u_long) cmd);
#endif
- cmd->next_wcmd = 0;
+ cmd->next_wcmd = NULL;
if (!(wcmd = np->waiting_list)) np->waiting_list = cmd;
else {
while ((wcmd->next_wcmd) != 0)
- wcmd = (Scsi_Cmnd *) wcmd->next_wcmd;
+ wcmd = (struct scsi_cmnd *) wcmd->next_wcmd;
wcmd->next_wcmd = (char *) cmd;
}
}
-static Scsi_Cmnd *retrieve_from_waiting_list(int to_remove, ncb_p np, Scsi_Cmnd *cmd)
+static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd)
{
- Scsi_Cmnd **pcmd = &np->waiting_list;
+ struct scsi_cmnd **pcmd = &np->waiting_list;
while (*pcmd) {
if (cmd == *pcmd) {
if (to_remove) {
- *pcmd = (Scsi_Cmnd *) cmd->next_wcmd;
- cmd->next_wcmd = 0;
+ *pcmd = (struct scsi_cmnd *) cmd->next_wcmd;
+ cmd->next_wcmd = NULL;
}
#ifdef DEBUG_WAITING_LIST
printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_long) cmd);
#endif
return cmd;
}
- pcmd = (Scsi_Cmnd **) &(*pcmd)->next_wcmd;
+ pcmd = (struct scsi_cmnd **) &(*pcmd)->next_wcmd;
}
- return 0;
+ return NULL;
}
-static void process_waiting_list(ncb_p np, int sts)
+static void process_waiting_list(struct ncb *np, int sts)
{
- Scsi_Cmnd *waiting_list, *wcmd;
+ struct scsi_cmnd *waiting_list, *wcmd;
waiting_list = np->waiting_list;
- np->waiting_list = 0;
+ np->waiting_list = NULL;
#ifdef DEBUG_WAITING_LIST
if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts);
#endif
while ((wcmd = waiting_list) != 0) {
- waiting_list = (Scsi_Cmnd *) wcmd->next_wcmd;
- wcmd->next_wcmd = 0;
+ waiting_list = (struct scsi_cmnd *) wcmd->next_wcmd;
+ wcmd->next_wcmd = NULL;
if (sts == DID_OK) {
#ifdef DEBUG_WAITING_LIST
printk("%s: cmd %lx trying to requeue\n", ncr_name(np), (u_long) wcmd);
#undef next_wcmd
-#ifdef SCSI_NCR_PROC_INFO_SUPPORT
+static ssize_t show_ncr53c8xx_revision(struct class_device *dev, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ struct host_data *host_data = (struct host_data *)host->hostdata;
+
+ return snprintf(buf, 20, "0x%x\n", host_data->ncb->revision_id);
+}
+
+static struct class_device_attribute ncr53c8xx_revision_attr = {
+ .attr = { .name = "revision", .mode = S_IRUGO, },
+ .show = show_ncr53c8xx_revision,
+};
+
+static struct class_device_attribute *ncr53c8xx_host_attrs[] = {
+ &ncr53c8xx_revision_attr,
+ NULL
+};
-/*=========================================================================
-** Proc file system stuff
+/*==========================================================
**
-** A read operation returns profile information.
-** A write operation is a control command.
-** The string is parsed in the driver code and the command is passed
-** to the ncr_usercmd() function.
-**=========================================================================
+** Boot command line.
+**
+**==========================================================
*/
+#ifdef MODULE
+char *ncr53c8xx; /* command line passed by insmod */
+module_param(ncr53c8xx, charp, 0);
+#endif
+
+static int __init ncr53c8xx_setup(char *str)
+{
+ return sym53c8xx__setup(str);
+}
-#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
+#ifndef MODULE
+__setup("ncr53c8xx=", ncr53c8xx_setup);
+#endif
-#define is_digit(c) ((c) >= '0' && (c) <= '9')
-#define digit_to_bin(c) ((c) - '0')
-#define is_space(c) ((c) == ' ' || (c) == '\t')
-static int skip_spaces(char *ptr, int len)
+/*
+ * Host attach and initialisations.
+ *
+ * Allocate host data and ncb structure.
+ * Request IO region and remap MMIO region.
+ * Do chip initialization.
+ * If all is OK, install interrupt handling and
+ * start the timer daemon.
+ */
+struct Scsi_Host * __init ncr_attach(struct scsi_host_template *tpnt,
+ int unit, struct ncr_device *device)
{
- int cnt, c;
+ struct host_data *host_data;
+ struct ncb *np = NULL;
+ struct Scsi_Host *instance = NULL;
+ u_long flags = 0;
+ int i;
- for (cnt = len; cnt > 0 && (c = *ptr++) && is_space(c); cnt--);
+ if (!tpnt->name)
+ tpnt->name = SCSI_NCR_DRIVER_NAME;
+ if (!tpnt->shost_attrs)
+ tpnt->shost_attrs = ncr53c8xx_host_attrs;
- return (len - cnt);
-}
+ tpnt->queuecommand = ncr53c8xx_queue_command;
+ tpnt->slave_configure = ncr53c8xx_slave_configure;
+ tpnt->slave_alloc = ncr53c8xx_slave_alloc;
+ tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset;
+ tpnt->can_queue = SCSI_NCR_CAN_QUEUE;
+ tpnt->this_id = 7;
+ tpnt->sg_tablesize = SCSI_NCR_SG_TABLESIZE;
+ tpnt->cmd_per_lun = SCSI_NCR_CMD_PER_LUN;
+ tpnt->use_clustering = ENABLE_CLUSTERING;
-static int get_int_arg(char *ptr, int len, u_long *pv)
-{
- int cnt, c;
- u_long v;
+ if (device->differential)
+ driver_setup.diff_support = device->differential;
- for (v = 0, cnt = len; cnt > 0 && (c = *ptr++) && is_digit(c); cnt--) {
- v = (v * 10) + digit_to_bin(c);
- }
+ printk(KERN_INFO "ncr53c720-%d: rev 0x%x irq %d\n",
+ unit, device->chip.revision_id, device->slot.irq);
- if (pv)
- *pv = v;
+ instance = scsi_host_alloc(tpnt, sizeof(*host_data));
+ if (!instance)
+ goto attach_error;
+ host_data = (struct host_data *) instance->hostdata;
- return (len - cnt);
-}
+ np = __m_calloc_dma(device->dev, sizeof(struct ncb), "NCB");
+ if (!np)
+ goto attach_error;
+ spin_lock_init(&np->smp_lock);
+ np->dev = device->dev;
+ np->p_ncb = vtobus(np);
+ host_data->ncb = np;
-static int is_keyword(char *ptr, int len, char *verb)
-{
- int verb_len = strlen(verb);
+ np->ccb = m_calloc_dma(sizeof(struct ccb), "CCB");
+ if (!np->ccb)
+ goto attach_error;
+
+ /* Store input information in the host data structure. */
+ np->unit = unit;
+ np->verbose = driver_setup.verbose;
+ sprintf(np->inst_name, "ncr53c720-%d", np->unit);
+ np->revision_id = device->chip.revision_id;
+ np->features = device->chip.features;
+ np->clock_divn = device->chip.nr_divisor;
+ np->maxoffs = device->chip.offset_max;
+ np->maxburst = device->chip.burst_max;
+ np->myaddr = device->host_id;
+
+ /* Allocate SCRIPTS areas. */
+ np->script0 = m_calloc_dma(sizeof(struct script), "SCRIPT");
+ if (!np->script0)
+ goto attach_error;
+ np->scripth0 = m_calloc_dma(sizeof(struct scripth), "SCRIPTH");
+ if (!np->scripth0)
+ goto attach_error;
+
+ init_timer(&np->timer);
+ np->timer.data = (unsigned long) np;
+ np->timer.function = ncr53c8xx_timeout;
- if (len >= strlen(verb) && !memcmp(verb, ptr, verb_len))
- return verb_len;
+ /* Try to map the controller chip to virtual and physical memory. */
+
+ np->paddr = device->slot.base;
+ np->paddr2 = (np->features & FE_RAM) ? device->slot.base_2 : 0;
+
+ if (device->slot.base_v)
+ np->vaddr = device->slot.base_v;
else
- return 0;
+ np->vaddr = ioremap(device->slot.base_c, 128);
-}
+ if (!np->vaddr) {
+ printk(KERN_ERR
+ "%s: can't map memory mapped IO region\n",ncr_name(np));
+ goto attach_error;
+ } else {
+ if (bootverbose > 1)
+ printk(KERN_INFO
+ "%s: using memory mapped IO at virtual address 0x%lx\n", ncr_name(np), (u_long) np->vaddr);
+ }
+
+ /* Make the controller's registers available. Now the INB INW INL
+ * OUTB OUTW OUTL macros can be used safely.
+ */
-#define SKIP_SPACES(min_spaces) \
- if ((arg_len = skip_spaces(ptr, len)) < (min_spaces)) \
- return -EINVAL; \
- ptr += arg_len; len -= arg_len;
+ np->reg = (struct ncr_reg __iomem *)np->vaddr;
-#define GET_INT_ARG(v) \
- if (!(arg_len = get_int_arg(ptr, len, &(v)))) \
- return -EINVAL; \
- ptr += arg_len; len -= arg_len;
+ /* Do chip dependent initialization. */
+ ncr_prepare_setting(np);
+ if (np->paddr2 && sizeof(struct script) > 4096) {
+ np->paddr2 = 0;
+ printk(KERN_WARNING "%s: script too large, NOT using on chip RAM.\n",
+ ncr_name(np));
+ }
-/*
-** Parse a control command
-*/
+ instance->max_channel = 0;
+ instance->this_id = np->myaddr;
+ instance->max_id = np->maxwide ? 16 : 8;
+ instance->max_lun = SCSI_NCR_MAX_LUN;
+ instance->base = (unsigned long) np->reg;
+ instance->irq = device->slot.irq;
+ instance->unique_id = device->slot.base;
+ instance->dma_channel = 0;
+ instance->cmd_per_lun = MAX_TAGS;
+ instance->can_queue = (MAX_START-4);
+ /* This can happen if you forget to call ncr53c8xx_init from
+ * your module_init */
+ BUG_ON(!ncr53c8xx_transport_template);
+ instance->transportt = ncr53c8xx_transport_template;
-static int ncr_user_command(ncb_p np, char *buffer, int length)
-{
- char *ptr = buffer;
- int len = length;
- struct usrcmd *uc = &np->user;
- int arg_len;
- u_long target;
-
- bzero(uc, sizeof(*uc));
-
- if (len > 0 && ptr[len-1] == '\n')
- --len;
-
- if ((arg_len = is_keyword(ptr, len, "setsync")) != 0)
- uc->cmd = UC_SETSYNC;
- else if ((arg_len = is_keyword(ptr, len, "settags")) != 0)
- uc->cmd = UC_SETTAGS;
- else if ((arg_len = is_keyword(ptr, len, "setorder")) != 0)
- uc->cmd = UC_SETORDER;
- else if ((arg_len = is_keyword(ptr, len, "setverbose")) != 0)
- uc->cmd = UC_SETVERBOSE;
- else if ((arg_len = is_keyword(ptr, len, "setwide")) != 0)
- uc->cmd = UC_SETWIDE;
- else if ((arg_len = is_keyword(ptr, len, "setdebug")) != 0)
- uc->cmd = UC_SETDEBUG;
- else if ((arg_len = is_keyword(ptr, len, "setflag")) != 0)
- uc->cmd = UC_SETFLAG;
- else
- arg_len = 0;
+ /* Patch script to physical addresses */
+ ncr_script_fill(&script0, &scripth0);
-#ifdef DEBUG_PROC_INFO
-printk("ncr_user_command: arg_len=%d, cmd=%ld\n", arg_len, uc->cmd);
-#endif
+ np->scripth = np->scripth0;
+ np->p_scripth = vtobus(np->scripth);
+ np->p_script = (np->paddr2) ? np->paddr2 : vtobus(np->script0);
- if (!arg_len)
- return -EINVAL;
- ptr += arg_len; len -= arg_len;
-
- switch(uc->cmd) {
- case UC_SETSYNC:
- case UC_SETTAGS:
- case UC_SETWIDE:
- case UC_SETFLAG:
- SKIP_SPACES(1);
- if ((arg_len = is_keyword(ptr, len, "all")) != 0) {
- ptr += arg_len; len -= arg_len;
- uc->target = ~0;
- } else {
- GET_INT_ARG(target);
- uc->target = (1<<target);
-#ifdef DEBUG_PROC_INFO
-printk("ncr_user_command: target=%ld\n", target);
-#endif
- }
- break;
+ ncr_script_copy_and_bind(np, (ncrcmd *) &script0,
+ (ncrcmd *) np->script0, sizeof(struct script));
+ ncr_script_copy_and_bind(np, (ncrcmd *) &scripth0,
+ (ncrcmd *) np->scripth0, sizeof(struct scripth));
+ np->ccb->p_ccb = vtobus (np->ccb);
+
+ /* Patch the script for LED support. */
+
+ if (np->features & FE_LED0) {
+ np->script0->idle[0] =
+ cpu_to_scr(SCR_REG_REG(gpreg, SCR_OR, 0x01));
+ np->script0->reselected[0] =
+ cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe));
+ np->script0->start[0] =
+ cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe));
}
- switch(uc->cmd) {
- case UC_SETVERBOSE:
- case UC_SETSYNC:
- case UC_SETTAGS:
- case UC_SETWIDE:
- SKIP_SPACES(1);
- GET_INT_ARG(uc->data);
-#ifdef DEBUG_PROC_INFO
-printk("ncr_user_command: data=%ld\n", uc->data);
-#endif
- break;
- case UC_SETORDER:
- SKIP_SPACES(1);
- if ((arg_len = is_keyword(ptr, len, "simple")))
- uc->data = M_SIMPLE_TAG;
- else if ((arg_len = is_keyword(ptr, len, "ordered")))
- uc->data = M_ORDERED_TAG;
- else if ((arg_len = is_keyword(ptr, len, "default")))
- uc->data = 0;
- else
- return -EINVAL;
- break;
- case UC_SETDEBUG:
- while (len > 0) {
- SKIP_SPACES(1);
- if ((arg_len = is_keyword(ptr, len, "alloc")))
- uc->data |= DEBUG_ALLOC;
- else if ((arg_len = is_keyword(ptr, len, "phase")))
- uc->data |= DEBUG_PHASE;
- else if ((arg_len = is_keyword(ptr, len, "queue")))
- uc->data |= DEBUG_QUEUE;
- else if ((arg_len = is_keyword(ptr, len, "result")))
- uc->data |= DEBUG_RESULT;
- else if ((arg_len = is_keyword(ptr, len, "scatter")))
- uc->data |= DEBUG_SCATTER;
- else if ((arg_len = is_keyword(ptr, len, "script")))
- uc->data |= DEBUG_SCRIPT;
- else if ((arg_len = is_keyword(ptr, len, "tiny")))
- uc->data |= DEBUG_TINY;
- else if ((arg_len = is_keyword(ptr, len, "timing")))
- uc->data |= DEBUG_TIMING;
- else if ((arg_len = is_keyword(ptr, len, "nego")))
- uc->data |= DEBUG_NEGO;
- else if ((arg_len = is_keyword(ptr, len, "tags")))
- uc->data |= DEBUG_TAGS;
- else
- return -EINVAL;
- ptr += arg_len; len -= arg_len;
- }
-#ifdef DEBUG_PROC_INFO
-printk("ncr_user_command: data=%ld\n", uc->data);
-#endif
- break;
- case UC_SETFLAG:
- while (len > 0) {
- SKIP_SPACES(1);
- if ((arg_len = is_keyword(ptr, len, "trace")))
- uc->data |= UF_TRACE;
- else if ((arg_len = is_keyword(ptr, len, "no_disc")))
- uc->data |= UF_NODISC;
- else
- return -EINVAL;
- ptr += arg_len; len -= arg_len;
- }
- break;
- default:
- break;
+ /*
+ * Look for the target control block of this nexus.
+ * For i = 0 to 3
+ * JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb)
+ */
+ for (i = 0 ; i < 4 ; i++) {
+ np->jump_tcb[i].l_cmd =
+ cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3))));
+ np->jump_tcb[i].l_paddr =
+ cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_target));
}
- if (len)
- return -EINVAL;
- else {
- unsigned long flags;
+ ncr_chip_reset(np, 100);
- NCR_LOCK_NCB(np, flags);
- ncr_usercmd (np);
- NCR_UNLOCK_NCB(np, flags);
- }
- return length;
-}
+ /* Now check the cache handling of the chipset. */
-#endif /* SCSI_NCR_USER_COMMAND_SUPPORT */
+ if (ncr_snooptest(np)) {
+ printk(KERN_ERR "CACHE INCORRECTLY CONFIGURED.\n");
+ goto attach_error;
+ }
+ /* Install the interrupt handler. */
+ np->irq = device->slot.irq;
-#ifdef SCSI_NCR_USER_INFO_SUPPORT
-/*
-** Copy formatted information into the input buffer.
-*/
+ /* Initialize the fixed part of the default ccb. */
+ ncr_init_ccb(np, np->ccb);
-static int ncr_host_info(ncb_p np, char *ptr, off_t offset, int len)
-{
- struct info_str info;
+ /*
+ * After SCSI devices have been opened, we cannot reset the bus
+ * safely, so we do it here. Interrupt handler does the real work.
+ * Process the reset exception if interrupts are not enabled yet.
+ * Then enable disconnects.
+ */
+ spin_lock_irqsave(&np->smp_lock, flags);
+ if (ncr_reset_scsi_bus(np, 0, driver_setup.settle_delay) != 0) {
+ printk(KERN_ERR "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np));
- info.buffer = ptr;
- info.length = len;
- info.offset = offset;
- info.pos = 0;
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+ goto attach_error;
+ }
+ ncr_exception(np);
- copy_info(&info, " Chip NCR53C%s, device id 0x%x, "
- "revision id 0x%x\n",
- np->chip_name, np->device_id, np->revision_id);
- copy_info(&info, " On PCI bus %d, device %d, function %d, IRQ %d\n",
- np->bus, (np->device_fn & 0xf8) >> 3, np->device_fn & 7,
- (int) np->irq);
- copy_info(&info, " Synchronous period factor %d, "
- "max commands per lun %d\n",
- (int) np->minsync, MAX_TAGS);
+ np->disc = 1;
- if (driver_setup.debug || driver_setup.verbose > 1) {
- copy_info(&info, " Debug flags 0x%x, verbosity level %d\n",
- driver_setup.debug, driver_setup.verbose);
+ /*
+ * The middle-level SCSI driver does not wait for devices to settle.
+ * Wait synchronously if more than 2 seconds.
+ */
+ if (driver_setup.settle_delay > 2) {
+ printk(KERN_INFO "%s: waiting %d seconds for scsi devices to settle...\n",
+ ncr_name(np), driver_setup.settle_delay);
+ mdelay(1000 * driver_setup.settle_delay);
}
- return info.pos > info.offset? info.pos - info.offset : 0;
-}
+ /* start the timeout daemon */
+ np->lasttime=0;
+ ncr_timeout (np);
+
+ /* use SIMPLE TAG messages by default */
+#ifdef SCSI_NCR_ALWAYS_SIMPLE_TAG
+ np->order = SIMPLE_QUEUE_TAG;
+#endif
-#endif /* SCSI_NCR_USER_INFO_SUPPORT */
+ spin_unlock_irqrestore(&np->smp_lock, flags);
+
+ return instance;
+
+ attach_error:
+ if (!instance)
+ return NULL;
+ printk(KERN_INFO "%s: detaching...\n", ncr_name(np));
+ if (!np)
+ goto unregister;
+ if (np->scripth0)
+ m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH");
+ if (np->script0)
+ m_free_dma(np->script0, sizeof(struct script), "SCRIPT");
+ if (np->ccb)
+ m_free_dma(np->ccb, sizeof(struct ccb), "CCB");
+ m_free_dma(np, sizeof(struct ncb), "NCB");
+ host_data->ncb = NULL;
+
+ unregister:
+ scsi_host_put(instance);
+
+ return NULL;
+}
-/*
-** Entry point of the scsi proc fs of the driver.
-** - func = 0 means read (returns profile data)
-** - func = 1 means write (parse user control command)
-*/
-static int ncr53c8xx_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
- int length, int func)
+int ncr53c8xx_release(struct Scsi_Host *host)
{
struct host_data *host_data;
- ncb_p ncb = 0;
- int retv;
-
-#ifdef DEBUG_PROC_INFO
-printk("ncr53c8xx_proc_info: hostno=%d, func=%d\n", host->host_no, func);
+#ifdef DEBUG_NCR53C8XX
+ printk("ncr53c8xx: release\n");
#endif
+ if (!host)
+ return 1;
+ host_data = (struct host_data *)host->hostdata;
+ if (host_data && host_data->ncb)
+ ncr_detach(host_data->ncb);
+ return 1;
+}
+
+static void ncr53c8xx_set_period(struct scsi_target *starget, int period)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ struct tcb *tp = &np->target[starget->id];
- host_data = (struct host_data *) host->hostdata;
- ncb = host_data->ncb;
+ if (period > np->maxsync)
+ period = np->maxsync;
+ else if (period < np->minsync)
+ period = np->minsync;
- if (func) {
-#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
- retv = ncr_user_command(ncb, buffer, length);
-#else
- retv = -EINVAL;
-#endif
- }
- else {
- if (start)
- *start = buffer;
-#ifdef SCSI_NCR_USER_INFO_SUPPORT
- retv = ncr_host_info(ncb, buffer, offset, length);
-#else
- retv = -EINVAL;
-#endif
- }
+ tp->usrsync = period;
- return retv;
+ ncr_negotiate(np, tp);
}
-/*=========================================================================
-** End of proc file system stuff
-**=========================================================================
-*/
-#endif
+static void ncr53c8xx_set_offset(struct scsi_target *starget, int offset)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ struct tcb *tp = &np->target[starget->id];
+ if (offset > np->maxoffs)
+ offset = np->maxoffs;
+ else if (offset < 0)
+ offset = 0;
-/*==========================================================
-**
-** Boot command line.
-**
-**==========================================================
-*/
-#ifdef MODULE
-char *ncr53c8xx = 0; /* command line passed by insmod */
-MODULE_PARM(ncr53c8xx, "s");
-#endif
+ tp->maxoffs = offset;
-int __init ncr53c8xx_setup(char *str)
+ ncr_negotiate(np, tp);
+}
+
+static void ncr53c8xx_set_width(struct scsi_target *starget, int width)
{
- return sym53c8xx__setup(str);
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ struct tcb *tp = &np->target[starget->id];
+
+ if (width > np->maxwide)
+ width = np->maxwide;
+ else if (width < 0)
+ width = 0;
+
+ tp->usrwide = width;
+
+ ncr_negotiate(np, tp);
}
-#ifndef MODULE
-__setup("ncr53c8xx=", ncr53c8xx_setup);
-#endif
+static void ncr53c8xx_get_signalling(struct Scsi_Host *shost)
+{
+ struct ncb *np = ((struct host_data *)shost->hostdata)->ncb;
+ enum spi_signal_type type;
-/*==========================================================
-**
-** Entry point for info() function
-**
-**==========================================================
-*/
-const char *ncr53c8xx_info (struct Scsi_Host *host)
+ switch (np->scsi_mode) {
+ case SMODE_SE:
+ type = SPI_SIGNAL_SE;
+ break;
+ case SMODE_HVD:
+ type = SPI_SIGNAL_HVD;
+ break;
+ default:
+ type = SPI_SIGNAL_UNKNOWN;
+ break;
+ }
+ spi_signalling(shost) = type;
+}
+
+static struct spi_function_template ncr53c8xx_transport_functions = {
+ .set_period = ncr53c8xx_set_period,
+ .show_period = 1,
+ .set_offset = ncr53c8xx_set_offset,
+ .show_offset = 1,
+ .set_width = ncr53c8xx_set_width,
+ .show_width = 1,
+ .get_signalling = ncr53c8xx_get_signalling,
+};
+
+int __init ncr53c8xx_init(void)
+{
+ ncr53c8xx_transport_template = spi_attach_transport(&ncr53c8xx_transport_functions);
+ if (!ncr53c8xx_transport_template)
+ return -ENODEV;
+ return 0;
+}
+
+void ncr53c8xx_exit(void)
{
- return SCSI_NCR_DRIVER_NAME;
+ spi_release_transport(ncr53c8xx_transport_template);
}