#ifndef NCR53C8XX_H
#define NCR53C8XX_H
-#include <linux/config.h>
#include <scsi/scsi_host.h>
+
/*
-** If you want a driver as small as possible, do not define the
+** If you want a driver as small as possible, donnot define the
** following options.
*/
#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
** Same as option 1, but also deal with
** misconfigured interrupts.
**
-** - Edge triggerred instead of level sensitive.
+** - Edge triggered instead of level sensitive.
** - No interrupt line connected.
** - IRQ number misconfigured.
**
/*
** Initial setup.
-** Can be overriden at startup by a command line.
+** Can be overridden at startup by a command line.
*/
#define SCSI_NCR_DRIVER_SETUP \
{ \
**-----------------------------------------------------------
** On 810A, 860, 825A, 875, 895 and 896 chips the content
** of SFBR register can be used as data (SCR_SFBR_DATA).
-** The 896 has additionnal IO registers starting at
+** The 896 has additional IO registers starting at
** offset 0x80. Bit 7 of register offset is stored in
** bit 7 of the SCRIPTS instruction first DWORD.
**-----------------------------------------------------------
**-----------------------------------------------------------
*/
-/*
-** Messages
-*/
-
-#define M_COMPLETE COMMAND_COMPLETE
-#define M_EXTENDED EXTENDED_MESSAGE
-#define M_SAVE_DP SAVE_POINTERS
-#define M_RESTORE_DP RESTORE_POINTERS
-#define M_DISCONNECT DISCONNECT
-#define M_ID_ERROR INITIATOR_ERROR
-#define M_ABORT ABORT_TASK_SET
-#define M_REJECT MESSAGE_REJECT
-#define M_NOOP NOP
-#define M_PARITY MSG_PARITY_ERROR
-#define M_LCOMPLETE LINKED_CMD_COMPLETE
-#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE
-#define M_RESET TARGET_RESET
-#define M_ABORT_TAG ABORT_TASK
-#define M_CLEAR_QUEUE CLEAR_TASK_SET
-#define M_INIT_REC INITIATE_RECOVERY
-#define M_REL_REC RELEASE_RECOVERY
-#define M_TERMINATE (0x11)
-#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG
-#define M_HEAD_TAG HEAD_OF_QUEUE_TAG
-#define M_ORDERED_TAG ORDERED_QUEUE_TAG
-#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE
-#define M_IDENTIFY (0x80)
-
-#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER
-#define M_X_SYNC_REQ EXTENDED_SDTR
-#define M_X_WIDE_REQ EXTENDED_WDTR
-#define M_X_PPR_REQ EXTENDED_PPR
-
/*
** Status
*/
extern struct Scsi_Host *ncr_attach(struct scsi_host_template *tpnt, int unit, struct ncr_device *device);
extern int ncr53c8xx_release(struct Scsi_Host *host);
-irqreturn_t ncr53c8xx_intr(int irq, void *dev_id, struct pt_regs * regs);
+irqreturn_t ncr53c8xx_intr(int irq, void *dev_id);
extern int ncr53c8xx_init(void);
extern void ncr53c8xx_exit(void);