#include <linux/interrupt.h>
#include "scsi.h"
-#include "hosts.h"
-#include "../qlogicfas.h"
+#include <scsi/scsi_host.h>
+#include "../qlogicfas408.h"
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ds.h>
#include <pcmcia/ciscode.h>
+/* Set the following to 2 to use normal interrupt (active high/totempole-
+ * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
+ * drain
+ */
+#define INT_TYPE 0
-extern Scsi_Host_Template qlogicfas_driver_template;
-extern void qlogicfas_preset(int port, int irq);
-extern int qlogicfas_bus_reset(Scsi_Cmnd *);
-extern irqreturn_t do_ql_ihandl(int irq, void *dev_id, struct pt_regs *regs);
-
-static char *qlogic_name = "qlogic_cs";
+static char qlogic_name[] = "qlogic_cs";
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
-MODULE_PARM(pc_debug, "i");
+module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version = "qlogic_cs.c 1.79-ac 2002/10/26 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif
-/*====================================================================*/
-
-/* Parameters that can be set with 'insmod' */
-
-/* Bit map of interrupts to choose from */
-static unsigned int irq_mask = 0xdeb8;
-static int irq_list[4] = { -1 };
-
-MODULE_PARM(irq_mask, "i");
-MODULE_PARM(irq_list, "1-4i");
+static Scsi_Host_Template qlogicfas_driver_template = {
+ .module = THIS_MODULE,
+ .name = qlogic_name,
+ .proc_name = qlogic_name,
+ .info = qlogicfas408_info,
+ .queuecommand = qlogicfas408_queuecommand,
+ .eh_abort_handler = qlogicfas408_abort,
+ .eh_bus_reset_handler = qlogicfas408_bus_reset,
+ .eh_device_reset_handler= qlogicfas408_device_reset,
+ .eh_host_reset_handler = qlogicfas408_host_reset,
+ .bios_param = qlogicfas408_biosparam,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = DISABLE_CLUSTERING,
+};
/*====================================================================*/
int qltyp; /* type of chip */
int qinitid;
struct Scsi_Host *shost; /* registered host structure */
- qlogicfas_priv_t priv;
+ struct qlogicfas408_priv *priv;
- qltyp = inb(qbase + 0xe) & 0xf8;
+ qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
qinitid = host->this_id;
if (qinitid < 0)
qinitid = 7; /* if no ID, use 7 */
- outb(1, qbase + 8); /* set for PIO pseudo DMA */
- REG0;
- outb(0x40 | qlcfg8 | qinitid, qbase + 8); /* (ini) bus id, disable scsi rst */
- outb(qlcfg5, qbase + 5); /* select timer */
- outb(qlcfg9, qbase + 9); /* prescaler */
-
-#if QL_RESET_AT_START
- outb(3, qbase + 3);
- REG1;
- /* FIXME: timeout */
- while (inb(qbase + 0xf) & 4)
- cpu_relax();
- REG0;
-#endif
+
+ qlogicfas408_setup(qbase, qinitid, INT_TYPE);
host->name = qlogic_name;
- shost = scsi_host_alloc(host, sizeof(struct qlogicfas_priv));
+ shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
if (!shost)
goto err;
shost->io_port = qbase;
if (qlirq != -1)
shost->irq = qlirq;
- priv = (qlogicfas_priv_t)&(shost->hostdata[0]);
+ priv = get_priv_by_host(shost);
priv->qlirq = qlirq;
priv->qbase = qbase;
priv->qinitid = qinitid;
+ priv->shost = shost;
+ priv->int_type = INT_TYPE;
- if (request_irq(qlirq, do_ql_ihandl, 0, qlogic_name, shost))
+ if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
goto free_scsi_host;
sprintf(priv->qinfo,
scsi_info_t *info;
client_reg_t client_reg;
dev_link_t *link;
- int i, ret;
+ int ret;
DEBUG(0, "qlogic_attach()\n");
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
- link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
- if (irq_list[0] == -1)
- link->irq.IRQInfo2 = irq_mask;
- else
- for (i = 0; i < 4; i++)
- link->irq.IRQInfo2 |= 1 << irq_list[i];
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->next = dev_list;
dev_list = link;
client_reg.dev_info = &dev_info;
- client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
client_reg.event_handler = &qlogic_event;
client_reg.EventMask = CS_EVENT_RESET_REQUEST | CS_EVENT_CARD_RESET | CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
client_reg.Version = 0x0210;
outb(0x04, link->io.BasePort1 + 0xd);
}
- qlogicfas_driver_template.name = qlogic_name;
- qlogicfas_driver_template.proc_name = qlogic_name;
-
/* The KXL-810AN has a bigger IO port window */
if (link->io.NumPorts1 == 32)
host = qlogic_detect(&qlogicfas_driver_template, link,
outb(0x04, link->io.BasePort1 + 0xd);
}
/* Ugggglllyyyy!!! */
- qlogicfas_bus_reset(NULL);
+ qlogicfas408_bus_reset(NULL);
}
break;
}
static void __exit exit_qlogic_cs(void)
{
pcmcia_unregister_driver(&qlogic_cs_driver);
-
- /* XXX: this really needs to move into generic code.. */
- while (dev_list != NULL)
- qlogic_detach(dev_list);
+ BUG_ON(dev_list != NULL);
}
MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
git://git.onelab.eu / linux-2.6.git / blobdiff