*/
#include "qla_def.h"
+#include <scsi/scsi_tcq.h>
+
static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
static void qla2x00_async_event(scsi_qla_host_t *, uint16_t *);
static void qla2x00_process_completed_request(struct scsi_qla_host *, uint32_t);
* qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
* @irq:
* @dev_id: SCSI driver HA context
- * @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
-qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
+qla2100_intr_handler(int irq, void *dev_id)
{
scsi_qla_host_t *ha;
struct device_reg_2xxx __iomem *reg;
* qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
- * @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
-qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
+qla2300_intr_handler(int irq, void *dev_id)
{
scsi_qla_host_t *ha;
struct device_reg_2xxx __iomem *reg;
if (stat & HSR_RISC_PAUSED) {
hccr = RD_REG_WORD(®->hccr);
if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
- qla_printk(KERN_INFO, ha,
- "Parity error -- HCCR=%x.\n", hccr);
+ qla_printk(KERN_INFO, ha, "Parity error -- "
+ "HCCR=%x, Dumping firmware!\n", hccr);
else
- qla_printk(KERN_INFO, ha,
- "RISC paused -- HCCR=%x.\n", hccr);
+ qla_printk(KERN_INFO, ha, "RISC paused -- "
+ "HCCR=%x, Dumping firmware!\n", hccr);
/*
* Issue a "HARD" reset in order for the RISC
*/
WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
RD_REG_WORD(®->hccr);
+
+ ha->isp_ops.fw_dump(ha, 1);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
} else if ((stat & HSR_RISC_INT) == 0)
ha->isp_ops.fw_dump(ha, 1);
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
if (mb[1] == 0 && mb[2] == 0) {
qla_printk(KERN_ERR, ha,
"Unrecoverable Hardware Error: adapter "
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
ha->flags.management_server_logged_in = 0;
-
- /* Update AEN queue. */
- qla2x00_enqueue_aen(ha, MBA_LIP_OCCURRED, NULL);
-
break;
case MBA_LOOP_UP: /* Loop Up Event */
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
link_speed = link_speeds[0];
- ha->link_data_rate = LDR_1GB;
+ ha->link_data_rate = PORT_SPEED_1GB;
} else {
link_speed = link_speeds[LS_UNKNOWN];
if (mb[1] < 5)
link_speed);
ha->flags.management_server_logged_in = 0;
-
- /* Update AEN queue. */
- qla2x00_enqueue_aen(ha, MBA_LOOP_UP, NULL);
break;
case MBA_LOOP_DOWN: /* Loop Down Event */
}
ha->flags.management_server_logged_in = 0;
- ha->link_data_rate = LDR_UNKNOWN;
+ ha->link_data_rate = PORT_SPEED_UNKNOWN;
if (ql2xfdmienable)
set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
-
- /* Update AEN queue. */
- qla2x00_enqueue_aen(ha, MBA_LOOP_DOWN, NULL);
break;
case MBA_LIP_RESET: /* LIP reset occurred */
ha->operating_mode = LOOP;
ha->flags.management_server_logged_in = 0;
-
- /* Update AEN queue. */
- qla2x00_enqueue_aen(ha, MBA_LIP_RESET, NULL);
-
break;
case MBA_POINT_TO_POINT: /* Point-to-Point */
set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
}
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
+
+ ha->flags.gpsc_supported = 1;
break;
case MBA_CHG_IN_CONNECTION: /* Change in connection mode */
break;
case MBA_PORT_UPDATE: /* Port database update */
- /*
- * If a single remote port just logged into (or logged out of)
- * us, create a new entry in our rscn fcports list and handle
- * the event like an RSCN.
- */
- if (ql2xprocessrscn &&
- !IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA6312(ha) &&
- !IS_QLA6322(ha) && !IS_QLA24XX(ha) && !IS_QLA25XX(ha) &&
- ha->flags.init_done && mb[1] != 0xffff &&
- ((ha->operating_mode == P2P && mb[1] != 0) ||
- (ha->operating_mode != P2P && mb[1] !=
- SNS_FIRST_LOOP_ID)) && (mb[2] == 6 || mb[2] == 7)) {
- int rval;
- fc_port_t *rscn_fcport;
-
- /* Create new fcport for login. */
- rscn_fcport = qla2x00_alloc_rscn_fcport(ha, GFP_ATOMIC);
- if (rscn_fcport) {
- DEBUG14(printk("scsi(%ld): Port Update -- "
- "creating RSCN fcport %p for %x/%x/%x.\n",
- ha->host_no, rscn_fcport, mb[1], mb[2],
- mb[3]));
-
- rscn_fcport->loop_id = mb[1];
- rscn_fcport->d_id.b24 = INVALID_PORT_ID;
- atomic_set(&rscn_fcport->state,
- FCS_DEVICE_LOST);
- list_add_tail(&rscn_fcport->list,
- &ha->rscn_fcports);
-
- rval = qla2x00_handle_port_rscn(ha, 0,
- rscn_fcport, 1);
- if (rval == QLA_SUCCESS)
- break;
- } else {
- DEBUG14(printk("scsi(%ld): Port Update -- "
- "-- unable to allocate RSCN fcport "
- "login.\n", ha->host_no));
- }
- }
-
/*
* If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
* event etc. earlier indicating loop is down) then process
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
-
- /* Update AEN queue. */
- qla2x00_enqueue_aen(ha, MBA_PORT_UPDATE, NULL);
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
set_bit(RSCN_UPDATE, &ha->dpc_flags);
-
- /* Update AEN queue. */
- qla2x00_enqueue_aen(ha, MBA_RSCN_UPDATE, &mb[0]);
break;
/* case MBA_RIO_RESPONSE: */
"scsi(%ld): [R|Z]IO update completion.\n",
ha->host_no));
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
qla24xx_process_response_queue(ha);
else
qla2x00_process_response_queue(ha);
DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x "
"%04x.\n", ha->host_no, mb[1], mb[2], mb[3]));
break;
+
+ case MBA_TRACE_NOTIFICATION:
+ DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n",
+ ha->host_no, mb[1], mb[2]));
+ break;
}
}
+static void
+qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data)
+{
+ fc_port_t *fcport = data;
+
+ if (fcport->ha->max_q_depth <= sdev->queue_depth)
+ return;
+
+ if (sdev->ordered_tags)
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG,
+ sdev->queue_depth + 1);
+ else
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG,
+ sdev->queue_depth + 1);
+
+ fcport->last_ramp_up = jiffies;
+
+ DEBUG2(qla_printk(KERN_INFO, fcport->ha,
+ "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
+ fcport->ha->host_no, sdev->channel, sdev->id, sdev->lun,
+ sdev->queue_depth));
+}
+
+static void
+qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data)
+{
+ fc_port_t *fcport = data;
+
+ if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1))
+ return;
+
+ DEBUG2(qla_printk(KERN_INFO, fcport->ha,
+ "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
+ fcport->ha->host_no, sdev->channel, sdev->id, sdev->lun,
+ sdev->queue_depth));
+}
+
+static inline void
+qla2x00_ramp_up_queue_depth(scsi_qla_host_t *ha, srb_t *sp)
+{
+ fc_port_t *fcport;
+ struct scsi_device *sdev;
+
+ sdev = sp->cmd->device;
+ if (sdev->queue_depth >= ha->max_q_depth)
+ return;
+
+ fcport = sp->fcport;
+ if (time_before(jiffies,
+ fcport->last_ramp_up + ql2xqfullrampup * HZ))
+ return;
+ if (time_before(jiffies,
+ fcport->last_queue_full + ql2xqfullrampup * HZ))
+ return;
+
+ spin_unlock_irq(&ha->hardware_lock);
+ starget_for_each_device(sdev->sdev_target, fcport,
+ qla2x00_adjust_sdev_qdepth_up);
+ spin_lock_irq(&ha->hardware_lock);
+}
+
/**
* qla2x00_process_completed_request() - Process a Fast Post response.
* @ha: SCSI driver HA context
/* Save ISP completion status */
sp->cmd->result = DID_OK << 16;
+
+ qla2x00_ramp_up_queue_depth(ha, sp);
qla2x00_sp_compl(ha, sp);
} else {
DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
case MS_IOCB_TYPE:
qla2x00_ms_entry(ha, (ms_iocb_entry_t *)pkt);
break;
- case MBX_IOCB_TYPE:
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha) &&
- !IS_QLA6312(ha) && !IS_QLA6322(ha)) {
- if (pkt->sys_define == SOURCE_ASYNC_IOCB) {
- qla2x00_process_iodesc(ha,
- (struct mbx_entry *)pkt);
- } else {
- /* MBX IOCB Type Not Supported. */
- DEBUG4(printk(KERN_WARNING
- "scsi(%ld): Received unknown MBX "
- "IOCB response pkt type=%x "
- "source=%x entry status=%x.\n",
- ha->host_no, pkt->entry_type,
- pkt->sys_define,
- pkt->entry_status));
- }
- break;
- }
- /* Fallthrough. */
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
uint16_t scsi_status;
uint8_t lscsi_status;
int32_t resid;
- uint32_t sense_len, rsp_info_len, resid_len;
+ uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len;
uint8_t *rsp_info, *sense_data;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
comp_status = le16_to_cpu(sts24->comp_status);
scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK;
} else {
qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
- if (ha->dpc_wait && !ha->dpc_active)
- up(ha->dpc_wait);
-
+ qla2xxx_wake_dpc(ha);
return;
}
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("scsi(%ld): Command already returned back to OS "
- "pkt->handle=%d sp=%p sp->state:%d\n",
- ha->host_no, sts->handle, sp, sp->state));
+ "pkt->handle=%d sp=%p.\n", ha->host_no, sts->handle, sp));
qla_printk(KERN_WARNING, ha,
"Command is NULL: already returned to OS (sp=%p)\n", sp);
fcport = sp->fcport;
- sense_len = rsp_info_len = resid_len = 0;
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ sense_len = rsp_info_len = resid_len = fw_resid_len = 0;
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
sense_len = le32_to_cpu(sts24->sense_len);
rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
resid_len = le32_to_cpu(sts24->rsp_residual_count);
+ fw_resid_len = le32_to_cpu(sts24->residual_len);
rsp_info = sts24->data;
sense_data = sts24->data;
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
/* Check for any FCP transport errors. */
if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) {
/* Sense data lies beyond any FCP RESPONSE data. */
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
sense_data += rsp_info_len;
if (rsp_info_len > 3 && rsp_info[3]) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol "
*/
switch (comp_status) {
case CS_COMPLETE:
+ case CS_QUEUE_FULL:
if (scsi_status == 0) {
cp->result = DID_OK << 16;
break;
}
cp->result = DID_OK << 16 | lscsi_status;
+ if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
+ DEBUG2(printk(KERN_INFO
+ "scsi(%ld): QUEUE FULL status detected "
+ "0x%x-0x%x.\n", ha->host_no, comp_status,
+ scsi_status));
+
+ /* Adjust queue depth for all luns on the port. */
+ fcport->last_queue_full = jiffies;
+ spin_unlock_irq(&ha->hardware_lock);
+ starget_for_each_device(cp->device->sdev_target,
+ fcport, qla2x00_adjust_sdev_qdepth_down);
+ spin_lock_irq(&ha->hardware_lock);
+ break;
+ }
if (lscsi_status != SS_CHECK_CONDITION)
break;
case CS_DATA_UNDERRUN:
resid = resid_len;
+ /* Use F/W calculated residual length. */
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
+ resid = fw_resid_len;
+
if (scsi_status & SS_RESIDUAL_UNDER) {
cp->resid = resid;
CMD_RESID_LEN(cp) = resid;
} else {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d) UNDERRUN status detected "
- "0x%x-0x%x.\n", ha->host_no, cp->device->id,
- cp->device->lun, comp_status, scsi_status));
+ "0x%x-0x%x. resid=0x%x fw_resid=0x%x cdb=0x%x "
+ "os_underflow=0x%x\n", ha->host_no,
+ cp->device->id, cp->device->lun, comp_status,
+ scsi_status, resid_len, resid, cp->cmnd[0],
+ cp->underflow));
}
case CS_TIMEOUT:
cp->result = DID_BUS_BUSY << 16;
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected "
"0x%x-0x%x\n", ha->host_no, cp->device->channel,
qla2x00_mark_device_lost(ha, fcport, 1, 1);
break;
- case CS_QUEUE_FULL:
- DEBUG2(printk(KERN_INFO
- "scsi(%ld): QUEUE FULL status detected 0x%x-0x%x.\n",
- ha->host_no, comp_status, scsi_status));
-
- /* SCSI Mid-Layer handles device queue full */
-
- cp->result = DID_OK << 16 | lscsi_status;
-
- break;
-
default:
DEBUG3(printk("scsi(%ld): Error detected (unknown status) "
"0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status));
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("%s(): Cmd already returned back to OS "
- "sp=%p sp->state:%d\n", __func__, sp, sp->state));
+ "sp=%p.\n", __func__, sp));
qla_printk(KERN_INFO, ha,
"cmd is NULL: already returned to OS (sp=%p)\n",
sp);
}
/* Move sense data. */
- if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
host_to_fcp_swap(pkt->data, sizeof(pkt->data));
memcpy(sp->request_sense_ptr, pkt->data, sense_sz);
DEBUG5(qla2x00_dump_buffer(sp->request_sense_ptr, sense_sz));
"Error entry - invalid handle\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
- if (ha->dpc_wait && !ha->dpc_active)
- up(ha->dpc_wait);
+ qla2xxx_wake_dpc(ha);
}
}
* qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
- * @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
-qla24xx_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
+qla24xx_intr_handler(int irq, void *dev_id)
{
scsi_qla_host_t *ha;
struct device_reg_24xx __iomem *reg;
qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
"Dumping firmware!\n", hccr);
- qla24xx_fw_dump(ha, 1);
-
+ ha->isp_ops.fw_dump(ha, 1);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
} else if ((stat & HSRX_RISC_INT) == 0)
DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
__func__, ha->host_no, pkt, pkt->handle));
- DEBUG9(printk("%s: ct pkt dump:\n", __func__);)
- DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx));)
+ DEBUG9(printk("%s: ct pkt dump:\n", __func__));
+ DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx)));
/* Validate handle. */
if (pkt->handle < MAX_OUTSTANDING_COMMANDS)