#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "0.9"
enum {
/*
* host flags
*/
- SIL_FLAG_NO_SATA_IRQ = (1 << 28),
SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
-
SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME,
+ ATA_FLAG_MMIO,
/*
* Controller IDs
*/
sil_3112 = 0,
- sil_3112_no_sata_irq = 1,
- sil_3512 = 2,
- sil_3114 = 3,
+ sil_3512 = 1,
+ sil_3114 = 2,
/*
* Register offsets
/* BMDMA/BMDMA2 */
SIL_INTR_STEERING = (1 << 1),
- SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */
- SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */
- SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */
- SIL_DMA_ACTIVE = (1 << 16), /* DMA running */
- SIL_DMA_ERROR = (1 << 17), /* PCI bus error */
- SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */
- SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */
- SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */
- SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */
- SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */
-
- /* SIEN */
- SIL_SIEN_N = (1 << 16), /* triggered by SError.N */
-
/*
* Others
*/
};
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static int sil_pci_device_resume(struct pci_dev *pdev);
static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void sil_post_set_mode (struct ata_port *ap);
-static irqreturn_t sil_interrupt(int irq, void *dev_instance,
- struct pt_regs *regs);
-static void sil_freeze(struct ata_port *ap);
-static void sil_thaw(struct ata_port *ap);
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
- { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
+ { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ } /* terminate list */
};
.id_table = sil_pci_tbl,
.probe = sil_init_one,
.remove = ata_pci_remove_one,
- .suspend = ata_pci_device_suspend,
- .resume = sil_pci_device_resume,
};
static struct scsi_host_template sil_sht = {
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
};
static const struct ata_port_operations sil_ops = {
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .probe_reset = ata_std_probe_reset,
.post_set_mode = sil_post_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_mmio_data_xfer,
- .freeze = sil_freeze,
- .thaw = sil_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = sil_interrupt,
+ .eng_timeout = ata_eng_timeout,
+ .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
},
- /* sil_3112_no_sata_irq */
- {
- .sht = &sil_sht,
- .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE |
- SIL_FLAG_NO_SATA_IRQ,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x3f, /* udma0-5 */
- .port_ops = &sil_ops,
- },
/* sil_3512 */
{
.sht = &sil_sht,
unsigned long tf; /* ATA taskfile register block */
unsigned long ctl; /* ATA control/altstatus register block */
unsigned long bmdma; /* DMA register block */
- unsigned long bmdma2; /* DMA register block #2 */
unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c },
- { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
- { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
- { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
+ { 0x80, 0x8A, 0x00, 0x40, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
for (i = 0; i < 2; i++) {
dev = &ap->device[i];
- if (!ata_dev_enabled(dev))
+ if (!ata_dev_present(dev))
dev_mode[i] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
dev_mode[i] = 1; /* PIO3/4 */
writel(val, mmio);
}
-static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
-{
- struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
- u8 status;
-
- if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
- u32 serror;
-
- /* SIEN doesn't mask SATA IRQs on some 3112s. Those
- * controllers continue to assert IRQ as long as
- * SError bits are pending. Clear SError immediately.
- */
- serror = sil_scr_read(ap, SCR_ERROR);
- sil_scr_write(ap, SCR_ERROR, serror);
-
- /* Trigger hotplug and accumulate SError only if the
- * port isn't already frozen. Otherwise, PHY events
- * during hardreset makes controllers with broken SIEN
- * repeat probing needlessly.
- */
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- ata_ehi_hotplugged(&ap->eh_info);
- ap->eh_info.serror |= serror;
- }
-
- goto freeze;
- }
-
- if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
- goto freeze;
-
- /* Check whether we are expecting interrupt in this state */
- switch (ap->hsm_task_state) {
- case HSM_ST_FIRST:
- /* Some pre-ATAPI-4 devices assert INTRQ
- * at this state when ready to receive CDB.
- */
-
- /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
- * The flag was turned on only for atapi devices.
- * No need to check is_atapi_taskfile(&qc->tf) again.
- */
- if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- goto err_hsm;
- break;
- case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
- /* clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- if (bmdma2 & SIL_DMA_ERROR) {
- qc->err_mask |= AC_ERR_HOST_BUS;
- ap->hsm_task_state = HSM_ST_ERR;
- }
- }
- break;
- case HSM_ST:
- break;
- default:
- goto err_hsm;
- }
-
- /* check main status, clearing INTRQ */
- status = ata_chk_status(ap);
- if (unlikely(status & ATA_BUSY))
- goto err_hsm;
-
- /* ack bmdma irq events */
- ata_bmdma_irq_clear(ap);
-
- /* kick HSM in the ass */
- ata_hsm_move(ap, qc, status, 0);
-
- return;
-
- err_hsm:
- qc->err_mask |= AC_ERR_HSM;
- freeze:
- ata_port_freeze(ap);
-}
-
-static irqreturn_t sil_interrupt(int irq, void *dev_instance,
- struct pt_regs *regs)
-{
- struct ata_host_set *host_set = dev_instance;
- void __iomem *mmio_base = host_set->mmio_base;
- int handled = 0;
- int i;
-
- spin_lock(&host_set->lock);
-
- for (i = 0; i < host_set->n_ports; i++) {
- struct ata_port *ap = host_set->ports[i];
- u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
-
- if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
- continue;
-
- /* turn off SATA_IRQ if not supported */
- if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
- bmdma2 &= ~SIL_DMA_SATA_IRQ;
-
- if (bmdma2 == 0xffffffff ||
- !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ)))
- continue;
-
- sil_host_intr(ap, bmdma2);
- handled = 1;
- }
-
- spin_unlock(&host_set->lock);
-
- return IRQ_RETVAL(handled);
-}
-
-static void sil_freeze(struct ata_port *ap)
-{
- void __iomem *mmio_base = ap->host_set->mmio_base;
- u32 tmp;
-
- /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */
- writel(0, mmio_base + sil_port[ap->port_no].sien);
-
- /* plug IRQ */
- tmp = readl(mmio_base + SIL_SYSCFG);
- tmp |= SIL_MASK_IDE0_INT << ap->port_no;
- writel(tmp, mmio_base + SIL_SYSCFG);
- readl(mmio_base + SIL_SYSCFG); /* flush */
-}
-
-static void sil_thaw(struct ata_port *ap)
-{
- void __iomem *mmio_base = ap->host_set->mmio_base;
- u32 tmp;
-
- /* clear IRQ */
- ata_chk_status(ap);
- ata_bmdma_irq_clear(ap);
-
- /* turn on SATA IRQ if supported */
- if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
- writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
-
- /* turn on IRQ */
- tmp = readl(mmio_base + SIL_SYSCFG);
- tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no);
- writel(tmp, mmio_base + SIL_SYSCFG);
-}
-
/**
* sil_dev_config - Apply device/host-specific errata fixups
* @ap: Port containing device to be examined
if (slow_down ||
((ap->flags & SIL_FLAG_MOD15WRITE) &&
(quirks & SIL_QUIRK_MOD15WRITE))) {
- ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix "
- "(mod15write workaround)\n");
+ printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n",
+ ap->id, dev->devno);
dev->max_sectors = 15;
return;
}
/* limit to udma5 */
if (quirks & SIL_QUIRK_UDMA5MAX) {
- ata_dev_printk(dev, KERN_INFO,
- "applying Maxtor errata fix %s\n", model_num);
+ printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n",
+ ap->id, dev->devno, model_num);
dev->udma_mask &= ATA_UDMA5;
return;
}
}
-static void sil_init_controller(struct pci_dev *pdev,
- int n_ports, unsigned long host_flags,
- void __iomem *mmio_base)
-{
- u8 cls;
- u32 tmp;
- int i;
-
- /* Initialize FIFO PCI bus arbitration */
- cls = sil_get_device_cache_line(pdev);
- if (cls) {
- cls >>= 3;
- cls++; /* cls = (line_size/8)+1 */
- for (i = 0; i < n_ports; i++)
- writew(cls << 8 | cls,
- mmio_base + sil_port[i].fifo_cfg);
- } else
- dev_printk(KERN_WARNING, &pdev->dev,
- "cache line size not set. Driver may not function\n");
-
- /* Apply R_ERR on DMA activate FIS errata workaround */
- if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
- int cnt;
-
- for (i = 0, cnt = 0; i < n_ports; i++) {
- tmp = readl(mmio_base + sil_port[i].sfis_cfg);
- if ((tmp & 0x3) != 0x01)
- continue;
- if (!cnt)
- dev_printk(KERN_INFO, &pdev->dev,
- "Applying R_ERR on DMA activate "
- "FIS errata fix\n");
- writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
- cnt++;
- }
- }
-
- if (n_ports == 4) {
- /* flip the magic "make 4 ports work" bit */
- tmp = readl(mmio_base + sil_port[2].bmdma);
- if ((tmp & SIL_INTR_STEERING) == 0)
- writel(tmp | SIL_INTR_STEERING,
- mmio_base + sil_port[2].bmdma);
- }
-}
-
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
int rc;
unsigned int i;
int pci_dev_busy = 0;
+ u32 tmp, irq_mask;
+ u8 cls;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /*
+ * If this driver happens to only be useful on Apple's K2, then
+ * we should check that here as it has a normal Serverworks ID
+ */
rc = pci_enable_device(pdev);
if (rc)
return rc;
probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
+ probe_ent->irq_flags = SA_SHIRQ;
probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
mmio_base = pci_iomap(pdev, 5, 0);
ata_std_ports(&probe_ent->port[i]);
}
- sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
- mmio_base);
+ /* Initialize FIFO PCI bus arbitration */
+ cls = sil_get_device_cache_line(pdev);
+ if (cls) {
+ cls >>= 3;
+ cls++; /* cls = (line_size/8)+1 */
+ for (i = 0; i < probe_ent->n_ports; i++)
+ writew(cls << 8 | cls,
+ mmio_base + sil_port[i].fifo_cfg);
+ } else
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "cache line size not set. Driver may not function\n");
+
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
+ if (ent->driver_data == sil_3114) {
+ irq_mask = SIL_MASK_4PORT;
+
+ /* flip the magic "make 4 ports work" bit */
+ tmp = readl(mmio_base + sil_port[2].bmdma);
+ if ((tmp & SIL_INTR_STEERING) == 0)
+ writel(tmp | SIL_INTR_STEERING,
+ mmio_base + sil_port[2].bmdma);
+
+ } else {
+ irq_mask = SIL_MASK_2PORT;
+ }
+
+ /* make sure IDE0/1/2/3 interrupts are not masked */
+ tmp = readl(mmio_base + SIL_SYSCFG);
+ if (tmp & irq_mask) {
+ tmp &= ~irq_mask;
+ writel(tmp, mmio_base + SIL_SYSCFG);
+ readl(mmio_base + SIL_SYSCFG); /* flush */
+ }
+
+ /* mask all SATA phy-related interrupts */
+ /* TODO: unmask bit 6 (SError N bit) for hotplug */
+ for (i = 0; i < probe_ent->n_ports; i++)
+ writel(0, mmio_base + sil_port[i].sien);
pci_set_master(pdev);
return rc;
}
-static int sil_pci_device_resume(struct pci_dev *pdev)
-{
- struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
-
- ata_pci_device_do_resume(pdev);
- sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags,
- host_set->mmio_base);
- ata_host_set_resume(host_set);
-
- return 0;
-}
-
static int __init sil_init(void)
{
return pci_module_init(&sil_pci_driver);
git://git.onelab.eu / linux-2.6.git / blobdiff