* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
- * Copyright 2003 Red Hat, Inc.
+ * Copyright 2003-2005 Red Hat, Inc.
* Copyright 2003 Benjamin Herrenschmidt
*
- * The contents of this file are subject to the Open
- * Software License version 1.1 that can be found at
- * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
- * by reference.
*
- * Alternatively, the contents of this file may be used under the terms
- * of the GNU General Public License version 2 (the "GPL") as distributed
- * in the kernel source COPYING file, in which case the provisions of
- * the GPL are applicable instead of the above. If you wish to allow
- * the use of your version of this file only under the terms of the
- * GPL and not to allow others to use your version of this file under
- * the OSL, indicate your decision by deleting the provisions above and
- * replace them with the notice and other provisions required by the GPL.
- * If you do not delete the provisions above, a recipient may use your
- * version of this file under either the OSL or the GPL.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Documentation for SiI 3112:
+ * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ * Other errata and documentation available under NDA.
*
*/
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include "scsi.h"
+#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
+ SIL_FLAG_MOD15WRITE = (1 << 30),
+
sil_3112 = 0,
- sil_3114 = 1,
+ sil_3112_m15w = 1,
+ sil_3512 = 2,
+ sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void sil_post_set_mode (struct ata_port *ap);
-static struct pci_device_id sil_pci_tbl[] = {
- { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+
+static const struct pci_device_id sil_pci_tbl[] = {
+ { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
+ { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
- { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
+ { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
+ { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ } /* terminate list */
};
.remove = ata_pci_remove_one,
};
-static Scsi_Host_Template sil_sht = {
+static struct scsi_host_template sil_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
- .ordered_flush = 1,
};
-static struct ata_port_operations sil_ops = {
+static const struct ata_port_operations sil_ops = {
.port_disable = ata_port_disable,
.dev_config = sil_dev_config,
.tf_load = ata_tf_load,
.scr_write = sil_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .host_stop = ata_pci_host_stop,
};
-static struct ata_port_info sil_port_info[] = {
+static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.sht = &sil_sht,
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_MOD15WRITE,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3512 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+static int slow_down = 0;
+module_param(slow_down, int, 0444);
+MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
+
+
static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
{
u8 cache_line = 0;
{
struct ata_host_set *host_set = ap->host_set;
struct ata_device *dev;
- void *addr = host_set->mmio_base + sil_port[ap->port_no].xfer_mode;
+ void __iomem *addr =
+ host_set->mmio_base + sil_port[ap->port_no].xfer_mode;
u32 tmp, dev_mode[2];
unsigned int i;
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
return readl(mmio);
return 0xffffffffU;
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
writel(val, mmio);
}
while ((len > 0) && (s[len - 1] == ' '))
len--;
- for (n = 0; sil_blacklist[n].product; n++)
+ for (n = 0; sil_blacklist[n].product; n++)
if (!memcmp(sil_blacklist[n].product, s,
strlen(sil_blacklist[n].product))) {
quirks = sil_blacklist[n].quirk;
break;
}
-
+
/* limit requests to 15 sectors */
- if (quirks & SIL_QUIRK_MOD15WRITE) {
- printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n",
+ if (slow_down ||
+ ((ap->flags & SIL_FLAG_MOD15WRITE) &&
+ (quirks & SIL_QUIRK_MOD15WRITE))) {
+ printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n",
ap->id, dev->devno);
ap->host->max_sectors = 15;
ap->host->hostt->max_sectors = 15;
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
- void *mmio_base;
+ void __iomem *mmio_base;
int rc;
unsigned int i;
int pci_dev_busy = 0;
u8 cls;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
probe_ent->irq_flags = SA_SHIRQ;
probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
- mmio_base = ioremap(pci_resource_start(pdev, 5),
- pci_resource_len(pdev, 5));
+ mmio_base = pci_iomap(pdev, 5, 0);
if (mmio_base == NULL) {
rc = -ENOMEM;
goto err_out_free_ent;
writeb(cls, mmio_base + SIL_FIFO_W3);
}
} else
- printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n",
- pci_name(pdev));
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "cache line size not set. Driver may not function\n");
+
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
git://git.onelab.eu / linux-2.6.git / blobdiff