* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
- * Copyright 2003 Red Hat, Inc.
- * Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2003-2005 Red Hat, Inc.
+ * Copyright 2003 Benjamin Herrenschmidt
*
- * The contents of this file are subject to the Open
- * Software License version 1.1 that can be found at
- * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
- * by reference.
*
- * Alternatively, the contents of this file may be used under the terms
- * of the GNU General Public License version 2 (the "GPL") as distributed
- * in the kernel source COPYING file, in which case the provisions of
- * the GPL are applicable instead of the above. If you wish to allow
- * the use of your version of this file only under the terms of the
- * GPL and not to allow others to use your version of this file under
- * the OSL, indicate your decision by deleting the provisions above and
- * replace them with the notice and other provisions required by the GPL.
- * If you do not delete the provisions above, a recipient may use your
- * version of this file under either the OSL or the GPL.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Documentation for SiI 3112:
+ * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ * Other errata and documentation available under NDA.
*
*/
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include "scsi.h"
+#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "0.54"
+#define DRV_VERSION "2.0"
enum {
+ /*
+ * host flags
+ */
+ SIL_FLAG_NO_SATA_IRQ = (1 << 28),
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
+ SIL_FLAG_MOD15WRITE = (1 << 30),
+
+ SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME,
+
+ /*
+ * Controller IDs
+ */
sil_3112 = 0,
- sil_3114 = 1,
+ sil_3112_no_sata_irq = 1,
+ sil_3512 = 2,
+ sil_3114 = 3,
+ /*
+ * Register offsets
+ */
SIL_SYSCFG = 0x48,
+
+ /*
+ * Register bits
+ */
+ /* SYSCFG */
SIL_MASK_IDE0_INT = (1 << 22),
SIL_MASK_IDE1_INT = (1 << 23),
SIL_MASK_IDE2_INT = (1 << 24),
SIL_MASK_4PORT = SIL_MASK_2PORT |
SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT,
- SIL_IDE2_BMDMA = 0x200,
-
+ /* BMDMA/BMDMA2 */
SIL_INTR_STEERING = (1 << 1),
+
+ SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */
+ SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */
+ SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */
+ SIL_DMA_ACTIVE = (1 << 16), /* DMA running */
+ SIL_DMA_ERROR = (1 << 17), /* PCI bus error */
+ SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */
+ SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */
+ SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */
+ SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */
+ SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */
+
+ /* SIEN */
+ SIL_SIEN_N = (1 << 16), /* triggered by SError.N */
+
+ /*
+ * Others
+ */
SIL_QUIRK_MOD15WRITE = (1 << 0),
SIL_QUIRK_UDMA5MAX = (1 << 1),
};
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil_pci_device_resume(struct pci_dev *pdev);
static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void sil_post_set_mode (struct ata_port *ap);
+static irqreturn_t sil_interrupt(int irq, void *dev_instance,
+ struct pt_regs *regs);
+static void sil_freeze(struct ata_port *ap);
+static void sil_thaw(struct ata_port *ap);
+
-static struct pci_device_id sil_pci_tbl[] = {
+static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
+ { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
+ { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_no_sata_irq },
{ } /* terminate list */
};
/* TODO firmware versions should be added - eric */
-struct sil_drivelist {
+static const struct sil_drivelist {
const char * product;
unsigned int quirk;
} sil_blacklist [] = {
{ "ST330013AS", SIL_QUIRK_MOD15WRITE },
{ "ST340017AS", SIL_QUIRK_MOD15WRITE },
{ "ST360015AS", SIL_QUIRK_MOD15WRITE },
+ { "ST380013AS", SIL_QUIRK_MOD15WRITE },
{ "ST380023AS", SIL_QUIRK_MOD15WRITE },
{ "ST3120023AS", SIL_QUIRK_MOD15WRITE },
{ "ST3160023AS", SIL_QUIRK_MOD15WRITE },
+ { "ST3120026AS", SIL_QUIRK_MOD15WRITE },
+ { "ST3200822AS", SIL_QUIRK_MOD15WRITE },
{ "ST340014ASL", SIL_QUIRK_MOD15WRITE },
{ "ST360014ASL", SIL_QUIRK_MOD15WRITE },
{ "ST380011ASL", SIL_QUIRK_MOD15WRITE },
.id_table = sil_pci_tbl,
.probe = sil_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = sil_pci_device_resume,
};
-static Scsi_Host_Template sil_sht = {
+static struct scsi_host_template sil_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
- .eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
};
-static struct ata_port_operations sil_ops = {
+static const struct ata_port_operations sil_ops = {
.port_disable = ata_port_disable,
.dev_config = sil_dev_config,
- .tf_load = ata_tf_load_mmio,
- .tf_read = ata_tf_read_mmio,
- .check_status = ata_check_status_mmio,
- .exec_command = ata_exec_command_mmio,
- .phy_reset = sata_phy_reset,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
.post_set_mode = sil_post_set_mode,
- .bmdma_setup = ata_bmdma_setup_mmio,
- .bmdma_start = ata_bmdma_start_mmio,
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
- .irq_handler = ata_interrupt,
+ .data_xfer = ata_mmio_data_xfer,
+ .freeze = sil_freeze,
+ .thaw = sil_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .irq_handler = sil_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_pci_host_stop,
};
-static struct ata_port_info sil_port_info[] = {
+static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.sht = &sil_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
- .pio_mask = 0x03, /* pio3-4 */
+ .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3112_no_sata_irq */
+ {
+ .sht = &sil_sht,
+ .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE |
+ SIL_FLAG_NO_SATA_IRQ,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3512 */
+ {
+ .sht = &sil_sht,
+ .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
{
.sht = &sil_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
- .pio_mask = 0x03, /* pio3-4 */
+ .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
},
unsigned long tf; /* ATA taskfile register block */
unsigned long ctl; /* ATA control/altstatus register block */
unsigned long bmdma; /* DMA register block */
+ unsigned long bmdma2; /* DMA register block #2 */
+ unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+static int slow_down = 0;
+module_param(slow_down, int, 0444);
+MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
+
+
+static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
+{
+ u8 cache_line = 0;
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line);
+ return cache_line;
+}
static void sil_post_set_mode (struct ata_port *ap)
{
struct ata_host_set *host_set = ap->host_set;
struct ata_device *dev;
- void *addr = host_set->mmio_base + sil_port[ap->port_no].xfer_mode;
+ void __iomem *addr =
+ host_set->mmio_base + sil_port[ap->port_no].xfer_mode;
u32 tmp, dev_mode[2];
unsigned int i;
for (i = 0; i < 2; i++) {
dev = &ap->device[i];
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
dev_mode[i] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
dev_mode[i] = 1; /* PIO3/4 */
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
return readl(mmio);
return 0xffffffffU;
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
writel(val, mmio);
}
+static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
+{
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ u8 status;
+
+ if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
+ u32 serror;
+
+ /* SIEN doesn't mask SATA IRQs on some 3112s. Those
+ * controllers continue to assert IRQ as long as
+ * SError bits are pending. Clear SError immediately.
+ */
+ serror = sil_scr_read(ap, SCR_ERROR);
+ sil_scr_write(ap, SCR_ERROR, serror);
+
+ /* Trigger hotplug and accumulate SError only if the
+ * port isn't already frozen. Otherwise, PHY events
+ * during hardreset makes controllers with broken SIEN
+ * repeat probing needlessly.
+ */
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+ ata_ehi_hotplugged(&ap->eh_info);
+ ap->eh_info.serror |= serror;
+ }
+
+ goto freeze;
+ }
+
+ if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
+ goto freeze;
+
+ /* Check whether we are expecting interrupt in this state */
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ /* Some pre-ATAPI-4 devices assert INTRQ
+ * at this state when ready to receive CDB.
+ */
+
+ /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
+ * The flag was turned on only for atapi devices.
+ * No need to check is_atapi_taskfile(&qc->tf) again.
+ */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ goto err_hsm;
+ break;
+ case HSM_ST_LAST:
+ if (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ /* clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+
+ if (bmdma2 & SIL_DMA_ERROR) {
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+ }
+ break;
+ case HSM_ST:
+ break;
+ default:
+ goto err_hsm;
+ }
+
+ /* check main status, clearing INTRQ */
+ status = ata_chk_status(ap);
+ if (unlikely(status & ATA_BUSY))
+ goto err_hsm;
+
+ /* ack bmdma irq events */
+ ata_bmdma_irq_clear(ap);
+
+ /* kick HSM in the ass */
+ ata_hsm_move(ap, qc, status, 0);
+
+ return;
+
+ err_hsm:
+ qc->err_mask |= AC_ERR_HSM;
+ freeze:
+ ata_port_freeze(ap);
+}
+
+static irqreturn_t sil_interrupt(int irq, void *dev_instance,
+ struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ void __iomem *mmio_base = host_set->mmio_base;
+ int handled = 0;
+ int i;
+
+ spin_lock(&host_set->lock);
+
+ for (i = 0; i < host_set->n_ports; i++) {
+ struct ata_port *ap = host_set->ports[i];
+ u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
+
+ if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+ continue;
+
+ /* turn off SATA_IRQ if not supported */
+ if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
+ bmdma2 &= ~SIL_DMA_SATA_IRQ;
+
+ if (bmdma2 == 0xffffffff ||
+ !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ)))
+ continue;
+
+ sil_host_intr(ap, bmdma2);
+ handled = 1;
+ }
+
+ spin_unlock(&host_set->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void sil_freeze(struct ata_port *ap)
+{
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ u32 tmp;
+
+ /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */
+ writel(0, mmio_base + sil_port[ap->port_no].sien);
+
+ /* plug IRQ */
+ tmp = readl(mmio_base + SIL_SYSCFG);
+ tmp |= SIL_MASK_IDE0_INT << ap->port_no;
+ writel(tmp, mmio_base + SIL_SYSCFG);
+ readl(mmio_base + SIL_SYSCFG); /* flush */
+}
+
+static void sil_thaw(struct ata_port *ap)
+{
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ u32 tmp;
+
+ /* clear IRQ */
+ ata_chk_status(ap);
+ ata_bmdma_irq_clear(ap);
+
+ /* turn on SATA IRQ if supported */
+ if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
+ writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
+
+ /* turn on IRQ */
+ tmp = readl(mmio_base + SIL_SYSCFG);
+ tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no);
+ writel(tmp, mmio_base + SIL_SYSCFG);
+}
+
/**
* sil_dev_config - Apply device/host-specific errata fixups
* @ap: Port containing device to be examined
static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
{
unsigned int n, quirks = 0;
- unsigned char model_num[40];
- const char *s;
- unsigned int len;
-
- ata_dev_id_string(dev, model_num, ATA_ID_PROD_OFS,
- sizeof(model_num));
- s = &model_num[0];
- len = strnlen(s, sizeof(model_num));
-
- /* ATAPI specifies that empty space is blank-filled; remove blanks */
- while ((len > 0) && (s[len - 1] == ' '))
- len--;
-
- for (n = 0; sil_blacklist[n].product; n++)
- if (!memcmp(sil_blacklist[n].product, s,
- strlen(sil_blacklist[n].product))) {
+ unsigned char model_num[41];
+
+ ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
+
+ for (n = 0; sil_blacklist[n].product; n++)
+ if (!strcmp(sil_blacklist[n].product, model_num)) {
quirks = sil_blacklist[n].quirk;
break;
}
-
+
/* limit requests to 15 sectors */
- if (quirks & SIL_QUIRK_MOD15WRITE) {
- printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n",
- ap->id, dev->devno);
- ap->host->max_sectors = 15;
- ap->host->hostt->max_sectors = 15;
- dev->flags |= ATA_DFLAG_LOCK_SECTORS;
+ if (slow_down ||
+ ((ap->flags & SIL_FLAG_MOD15WRITE) &&
+ (quirks & SIL_QUIRK_MOD15WRITE))) {
+ ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix "
+ "(mod15write workaround)\n");
+ dev->max_sectors = 15;
return;
}
/* limit to udma5 */
if (quirks & SIL_QUIRK_UDMA5MAX) {
- printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n",
- ap->id, dev->devno, s);
- ap->udma_mask &= ATA_UDMA5;
+ ata_dev_printk(dev, KERN_INFO,
+ "applying Maxtor errata fix %s\n", model_num);
+ dev->udma_mask &= ATA_UDMA5;
return;
}
}
+static void sil_init_controller(struct pci_dev *pdev,
+ int n_ports, unsigned long host_flags,
+ void __iomem *mmio_base)
+{
+ u8 cls;
+ u32 tmp;
+ int i;
+
+ /* Initialize FIFO PCI bus arbitration */
+ cls = sil_get_device_cache_line(pdev);
+ if (cls) {
+ cls >>= 3;
+ cls++; /* cls = (line_size/8)+1 */
+ for (i = 0; i < n_ports; i++)
+ writew(cls << 8 | cls,
+ mmio_base + sil_port[i].fifo_cfg);
+ } else
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "cache line size not set. Driver may not function\n");
+
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
+ if (n_ports == 4) {
+ /* flip the magic "make 4 ports work" bit */
+ tmp = readl(mmio_base + sil_port[2].bmdma);
+ if ((tmp & SIL_INTR_STEERING) == 0)
+ writel(tmp | SIL_INTR_STEERING,
+ mmio_base + sil_port[2].bmdma);
+ }
+}
+
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
- void *mmio_base;
+ void __iomem *mmio_base;
int rc;
unsigned int i;
- u32 tmp, irq_mask;
+ int pci_dev_busy = 0;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
- /*
- * If this driver happens to only be useful on Apple's K2, then
- * we should check that here as it has a normal Serverworks ID
- */
rc = pci_enable_device(pdev);
if (rc)
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
if (rc)
goto err_out_regions;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
goto err_out_regions;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
INIT_LIST_HEAD(&probe_ent->node);
- probe_ent->pdev = pdev;
+ probe_ent->dev = pci_dev_to_dev(pdev);
probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
probe_ent->sht = sil_port_info[ent->driver_data].sht;
probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
+ probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
- mmio_base = ioremap(pci_resource_start(pdev, 5),
- pci_resource_len(pdev, 5));
+ mmio_base = pci_iomap(pdev, 5, 0);
if (mmio_base == NULL) {
rc = -ENOMEM;
goto err_out_free_ent;
ata_std_ports(&probe_ent->port[i]);
}
- if (ent->driver_data == sil_3114) {
- irq_mask = SIL_MASK_4PORT;
-
- /* flip the magic "make 4 ports work" bit */
- tmp = readl(mmio_base + SIL_IDE2_BMDMA);
- if ((tmp & SIL_INTR_STEERING) == 0)
- writel(tmp | SIL_INTR_STEERING,
- mmio_base + SIL_IDE2_BMDMA);
-
- } else {
- irq_mask = SIL_MASK_2PORT;
- }
-
- /* make sure IDE0/1/2/3 interrupts are not masked */
- tmp = readl(mmio_base + SIL_SYSCFG);
- if (tmp & irq_mask) {
- tmp &= ~irq_mask;
- writel(tmp, mmio_base + SIL_SYSCFG);
- readl(mmio_base + SIL_SYSCFG); /* flush */
- }
-
- /* mask all SATA phy-related interrupts */
- /* TODO: unmask bit 6 (SError N bit) for hotplug */
- for (i = 0; i < probe_ent->n_ports; i++)
- writel(0, mmio_base + sil_port[i].sien);
+ sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
+ mmio_base);
pci_set_master(pdev);
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
+static int sil_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+
+ ata_pci_device_do_resume(pdev);
+ sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags,
+ host_set->mmio_base);
+ ata_host_set_resume(host_set);
+
+ return 0;
+}
+
static int __init sil_init(void)
{
return pci_module_init(&sil_pci_driver);