#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
-#define DRV_VERSION "1.2"
-
-enum {
- /* Interrupt register offsets (from chip base address) */
- VSC_SATA_INT_STAT_OFFSET = 0x00,
- VSC_SATA_INT_MASK_OFFSET = 0x04,
-
- /* Taskfile registers offsets */
- VSC_SATA_TF_CMD_OFFSET = 0x00,
- VSC_SATA_TF_DATA_OFFSET = 0x00,
- VSC_SATA_TF_ERROR_OFFSET = 0x04,
- VSC_SATA_TF_FEATURE_OFFSET = 0x06,
- VSC_SATA_TF_NSECT_OFFSET = 0x08,
- VSC_SATA_TF_LBAL_OFFSET = 0x0c,
- VSC_SATA_TF_LBAM_OFFSET = 0x10,
- VSC_SATA_TF_LBAH_OFFSET = 0x14,
- VSC_SATA_TF_DEVICE_OFFSET = 0x18,
- VSC_SATA_TF_STATUS_OFFSET = 0x1c,
- VSC_SATA_TF_COMMAND_OFFSET = 0x1d,
- VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28,
- VSC_SATA_TF_CTL_OFFSET = 0x29,
-
- /* DMA base */
- VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64,
- VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C,
- VSC_SATA_DMA_CMD_OFFSET = 0x70,
-
- /* SCRs base */
- VSC_SATA_SCR_STATUS_OFFSET = 0x100,
- VSC_SATA_SCR_ERROR_OFFSET = 0x104,
- VSC_SATA_SCR_CONTROL_OFFSET = 0x108,
-
- /* Port stride */
- VSC_SATA_PORT_OFFSET = 0x200,
-
- /* Error interrupt status bit offsets */
- VSC_SATA_INT_ERROR_CRC = 0x40,
- VSC_SATA_INT_ERROR_T = 0x20,
- VSC_SATA_INT_ERROR_P = 0x10,
- VSC_SATA_INT_ERROR_R = 0x8,
- VSC_SATA_INT_ERROR_E = 0x4,
- VSC_SATA_INT_ERROR_M = 0x2,
- VSC_SATA_INT_PHY_CHANGE = 0x1,
- VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \
- VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \
- VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \
- VSC_SATA_INT_PHY_CHANGE),
-};
-
-
+#define DRV_VERSION "1.1"
+
+/* Interrupt register offsets (from chip base address) */
+#define VSC_SATA_INT_STAT_OFFSET 0x00
+#define VSC_SATA_INT_MASK_OFFSET 0x04
+
+/* Taskfile registers offsets */
+#define VSC_SATA_TF_CMD_OFFSET 0x00
+#define VSC_SATA_TF_DATA_OFFSET 0x00
+#define VSC_SATA_TF_ERROR_OFFSET 0x04
+#define VSC_SATA_TF_FEATURE_OFFSET 0x06
+#define VSC_SATA_TF_NSECT_OFFSET 0x08
+#define VSC_SATA_TF_LBAL_OFFSET 0x0c
+#define VSC_SATA_TF_LBAM_OFFSET 0x10
+#define VSC_SATA_TF_LBAH_OFFSET 0x14
+#define VSC_SATA_TF_DEVICE_OFFSET 0x18
+#define VSC_SATA_TF_STATUS_OFFSET 0x1c
+#define VSC_SATA_TF_COMMAND_OFFSET 0x1d
+#define VSC_SATA_TF_ALTSTATUS_OFFSET 0x28
+#define VSC_SATA_TF_CTL_OFFSET 0x29
+
+/* DMA base */
+#define VSC_SATA_UP_DESCRIPTOR_OFFSET 0x64
+#define VSC_SATA_UP_DATA_BUFFER_OFFSET 0x6C
+#define VSC_SATA_DMA_CMD_OFFSET 0x70
+
+/* SCRs base */
+#define VSC_SATA_SCR_STATUS_OFFSET 0x100
+#define VSC_SATA_SCR_ERROR_OFFSET 0x104
+#define VSC_SATA_SCR_CONTROL_OFFSET 0x108
+
+/* Port stride */
+#define VSC_SATA_PORT_OFFSET 0x200
+
+/* Error interrupt status bit offsets */
+#define VSC_SATA_INT_ERROR_E_OFFSET 2
+#define VSC_SATA_INT_ERROR_P_OFFSET 4
+#define VSC_SATA_INT_ERROR_T_OFFSET 5
+#define VSC_SATA_INT_ERROR_M_OFFSET 1
#define is_vsc_sata_int_err(port_idx, int_status) \
- (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
+ (int_status & ((1 << (VSC_SATA_INT_ERROR_E_OFFSET + (8 * port_idx))) | \
+ (1 << (VSC_SATA_INT_ERROR_P_OFFSET + (8 * port_idx))) | \
+ (1 << (VSC_SATA_INT_ERROR_T_OFFSET + (8 * port_idx))) | \
+ (1 << (VSC_SATA_INT_ERROR_M_OFFSET + (8 * port_idx))) \
+ )\
+ )
static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
ap = host_set->ports[i];
+ if (is_vsc_sata_int_err(i, int_status)) {
+ u32 err_status;
+ printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
+ err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
+ vsc_sata_scr_write(ap, SCR_ERROR, err_status);
+ handled++;
+ }
+
if (ap && !(ap->flags &
(ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
handled += ata_host_intr(ap, qc);
- } else if (is_vsc_sata_int_err(i, int_status)) {
- /*
- * On some chips (i.e. Intel 31244), an error
- * interrupt will sneak in at initialization
- * time (phy state changes). Clearing the SCR
- * error register is not required, but it prevents
- * the phy state change interrupts from recurring
- * later.
- */
- u32 err_status;
- err_status = vsc_sata_scr_read(ap, SCR_ERROR);
- printk(KERN_DEBUG "%s: clearing interrupt, "
- "status %x; sata err status %x\n",
- __FUNCTION__,
- int_status, err_status);
- vsc_sata_scr_write(ap, SCR_ERROR, err_status);
- /* Clear interrupt status */
+ } else {
+ printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
ata_chk_status(ap);
handled++;
}
+
}
}
}
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,