#include <linux/keyboard.h>
#include <linux/init.h>
#include <linux/pm.h>
+#include <linux/pm_legacy.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/segment.h>
-#include <asm/bitops.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
* memory if large numbers of serial ports are open.
*/
static unsigned char tmp_buf[SERIAL_XMIT_SIZE]; /* This is cheating */
-DECLARE_MUTEX(tmp_buf_sem);
static inline int serial_paranoia_check(struct m68k_serial *info,
char *name, const char *routine)
{
struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
- unsigned char ch;
+ unsigned char ch, flag;
/*
* This do { } while() loop will get ALL chars out of Rx FIFO
/* show_net_buffers(); */
return;
} else if (ch == 0x12) { /* ^R */
- machine_restart(NULL);
+ emergency_restart();
return;
#endif /* CONFIG_MAGIC_SYSRQ */
}
/*
* Make sure that we do not overflow the buffer
*/
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- schedule_work(&tty->flip.work);
+ if (tty_request_buffer_room(tty, 1) == 0) {
+ tty_schedule_flip(tty);
return;
}
+ flag = TTY_NORMAL;
+
if(rx & URX_PARITY_ERROR) {
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ flag = TTY_PARITY;
status_handle(info, rx);
} else if(rx & URX_OVRUN) {
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ flag = TTY_OVERRUN;
status_handle(info, rx);
} else if(rx & URX_FRAME_ERROR) {
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ flag = TTY_FRAME;
status_handle(info, rx);
- } else {
- *tty->flip.flag_buf_ptr++ = 0; /* XXX */
}
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
-
+ tty_insert_flip_char(tty, ch, flag);
#ifndef CONFIG_XCOPILOT_BUGS
} while((rx = uart->urx.w) & URX_DATA_READY);
#endif
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
clear_and_exit:
return;
extern void console_printn(const char * b, int count);
-static int rs_write(struct tty_struct * tty, int from_user,
+static int rs_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
int c, total = 0;
if (c <= 0)
break;
- if (from_user) {
- down(&tmp_buf_sem);
- copy_from_user(tmp_buf, buf, c);
- c = min_t(int, c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
- up(&tmp_buf_sem);
- } else
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt += c;
restore_flags(flags);
/*
* This routine sends a break character out the serial port.
*/
-static void send_break( struct m68k_serial * info, int duration)
+static void send_break(struct m68k_serial * info, unsigned int duration)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (!info->port)
return;
- current->state = TASK_INTERRUPTIBLE;
save_flags(flags);
cli();
#ifdef USE_INTS
uart->utx.w |= UTX_SEND_BREAK;
- schedule_timeout(duration);
+ msleep_interruptible(duration);
uart->utx.w &= ~UTX_SEND_BREAK;
#endif
restore_flags(flags);
return retval;
tty_wait_until_sent(tty, 0);
if (!arg)
- send_break(info, HZ/4); /* 1/4 second */
+ send_break(info, 250); /* 1/4 second */
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg*(HZ/10) : HZ/4);
+ send_break(info, arg ? arg*(100) : 250);
return 0;
case TIOCGSOFTCAR:
error = put_user(C_CLOCAL(tty) ? 1 : 0,
(arg ? CLOCAL : 0));
return 0;
case TIOCGSERIAL:
- error = verify_area(VERIFY_WRITE, (void *) arg,
- sizeof(struct serial_struct));
- if (error)
- return error;
- return get_serial_info(info,
+ if (access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(struct serial_struct)))
+ return get_serial_info(info,
(struct serial_struct *) arg);
+ return -EFAULT;
case TIOCSSERIAL:
return set_serial_info(info,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
- error = verify_area(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int));
- if (error)
- return error;
- else
- return get_lsr_info(info, (unsigned int *) arg);
-
+ if (access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(unsigned int));
+ return get_lsr_info(info, (unsigned int *) arg);
+ return -EFAULT;
case TIOCSERGSTRUCT:
- error = verify_area(VERIFY_WRITE, (void *) arg,
- sizeof(struct m68k_serial));
- if (error)
- return error;
+ if (!access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(struct m68k_serial)))
+ return -EFAULT;
copy_to_user((struct m68k_serial *) arg,
info, sizeof(struct m68k_serial));
return 0;
#endif
if (info->blocked_open) {
if (info->close_delay) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(info->close_delay);
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
}
wake_up_interruptible(&info->open_wait);
}
printk("MC68328 serial driver version 1.00\n");
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
/* Serial Power management
* The console (currently fixed at line 0) is a special case for power
* management because the kernel is so chatty. The console will be
struct m68k_serial *info = &m68k_soft[0];
startup(info);
}
-#endif
+#endif /* CONFIG_PM_LEGACY */
static struct tty_operations rs_ops = {
IRQ_FLG_STD,
"M68328_UART", NULL))
panic("Unable to attach 68328 serial interrupt\n");
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback);
if (serial_pm[i])
serial_pm[i]->data = info;
return 0;
}
-
-
-/*
- * register_serial and unregister_serial allows for serial ports to be
- * configured at run-time, to support PCMCIA modems.
- */
-/* SPARC: Unused at this time, just here to make things link. */
-int register_serial(struct serial_struct *req)
-{
- return -1;
-}
-
-void unregister_serial(int line)
-{
- return;
-}
-
module_init(rs68328_init);
git://git.onelab.eu / linux-2.6.git / blobdiff