static _INLINE_ void receive_chars(ser_info_t *info)
{
struct tty_struct *tty = info->tty;
- unsigned char ch, *cp;
+ unsigned char ch, flag, *cp;
/*int ignored = 0;*/
int i;
ushort status;
cp = (char *)bdp->buf;
status = bdp->status;
- /* Check to see if there is room in the tty buffer for
- * the characters in our BD buffer. If not, we exit
- * now, leaving the BD with the characters. We'll pick
- * them up again on the next receive interrupt (which could
- * be a timeout).
- */
- if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE)
- break;
-
while (i-- > 0) {
ch = *cp++;
- *tty->flip.char_buf_ptr = ch;
icount->rx++;
#ifdef SERIAL_DEBUG_INTR
printk("DR%02x:%02x...", ch, status);
#endif
- *tty->flip.flag_buf_ptr = 0;
+ flag = TTY_NORMAL;
+
if (status & (BD_SC_BR | BD_SC_FR |
BD_SC_PR | BD_SC_OV)) {
/*
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & BD_SC_PR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & BD_SC_FR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- if (status & BD_SC_OV) {
- /*
- * Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr =
- TTY_OVERRUN;
- }
- }
+ flag = TTY_FRAME;
}
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, flag);
+ if (status & BD_SC_OV)
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
/* This BD is ready to be used again. Clear status.
info->rx_cur = (QUICC_BD *)bdp;
- schedule_work(&tty->flip.work);
+ tty_schedule_flip(tty);
}
static _INLINE_ void receive_break(ser_info_t *info)
/* Check to see if there is room in the tty buffer for
* the break. If not, we exit now, losing the break. FIXME
*/
- if ((tty->flip.count + 1) >= TTY_FLIPBUF_SIZE)
- return;
- *(tty->flip.flag_buf_ptr++) = TTY_BREAK;
- *(tty->flip.char_buf_ptr++) = 0;
- tty->flip.count++;
-
- schedule_work(&tty->flip.work);
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ tty_schedule_flip(tty);
}
static _INLINE_ void transmit_chars(ser_info_t *info)
if (!tty)
return;
- if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
- wake_up_interruptible(&tty->write_wait);
- }
+ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
+ tty_wakeup(tty);
}
}
-static int rs_360_write(struct tty_struct * tty, int from_user,
+static int rs_360_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
int c, ret = 0;
break;
}
- if (from_user) {
- if (copy_from_user((void *)bdp->buf, buf, c)) {
- if (!ret)
- ret = -EFAULT;
- break;
- }
- } else {
- /* memcpy(__va(bdp->buf), buf, c); */
- memcpy((void *)bdp->buf, buf, c);
- }
+ /* memcpy(__va(bdp->buf), buf, c); */
+ memcpy((void *)bdp->buf, buf, c);
bdp->length = c;
bdp->status |= BD_SC_READY;
/* There is nothing to "flush", whatever we gave the CPM
* is on its way out.
*/
- wake_up_interruptible(&tty->write_wait);
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
+ tty_wakeup(tty);
info->flags &= ~TX_WAKEUP;
}
/*
* This routine sends a break character out the serial port.
*/
-static void send_break(ser_info_t *info, int duration)
+static void send_break(ser_info_t *info, unsigned int duration)
{
- current->state = TASK_INTERRUPTIBLE;
#ifdef SERIAL_DEBUG_SEND_BREAK
printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
#endif
begin_break(info);
- schedule_timeout(duration);
+ msleep_interruptible(duration);
end_break(info);
#ifdef SERIAL_DEBUG_SEND_BREAK
printk("done jiffies=%lu\n", jiffies);
if (signal_pending(current))
return -EINTR;
if (!arg) {
- send_break(info, HZ/4); /* 1/4 second */
+ send_break(info, 250); /* 1/4 second */
if (signal_pending(current))
return -EINTR;
}
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
- send_break(info, arg ? arg*(HZ/10) : HZ/4);
+ send_break(info, arg ? arg*100 : 250);
if (signal_pending(current))
return -EINTR;
return 0;
if (tty_hung_up_p(filp)) {
DBG_CNT("before DEC-hung");
- MOD_DEC_USE_COUNT;
local_irq_restore(flags);
return;
}
}
if (state->count) {
DBG_CNT("before DEC-2");
- MOD_DEC_USE_COUNT;
local_irq_restore(flags);
return;
}
shutdown(info);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
+ tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
if (info->blocked_open) {
if (info->close_delay) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(info->close_delay);
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
}
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
- MOD_DEC_USE_COUNT;
local_irq_restore(flags);
}
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
#endif
- current->state = TASK_INTERRUPTIBLE;
/* current->counter = 0; make us low-priority */
- schedule_timeout(char_time);
+ msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
break;
if (timeout && ((orig_jiffies + timeout) < jiffies))
if (retval)
return retval;
- MOD_INC_USE_COUNT;
retval = block_til_ready(tty, filp, info);
if (retval) {
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open returning after block_til_ready with %d\n",
retval);
#endif
- MOD_DEC_USE_COUNT;
return retval;
}
static int baud_idx;
static struct tty_operations rs_360_ops = {
+ .owner = THIS_MODULE,
.open = rs_360_open,
.close = rs_360_close,
.write = rs_360_write,
.tiocmset = rs_360_tiocmset,
};
-/* int __init rs_360_init(void) */
-int rs_360_init(void)
+static int __init rs_360_init(void)
{
struct serial_state * state;
ser_info_t *info;
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
state->icount.overrun = state->icount.brk = 0;
- printk(KERN_INFO "ttyS%02d at irq 0x%02x is an %s\n",
+ printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n",
i, (unsigned int)(state->irq),
(state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
return 0;
}
-
-
-
-
+module_init(rs_360_init);
/* This must always be called before the rs_360_init() function, otherwise
* it blows away the port control information.