fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / serial / 8250.h

diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 79c0368..91bd28f 100644 (file)
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -15,11 +15,7 @@
  *  $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
  */
 
-#include <linux/config.h>
-
-void serial8250_get_irq_map(unsigned int *map);
-void serial8250_suspend_port(int line);
-void serial8250_resume_port(int line);
+#include <linux/serial_8250.h>
 
 struct old_serial_port {
        unsigned int uart;
@@ -38,26 +34,21 @@ struct old_serial_port {
  */
 struct serial8250_config {
        const char      *name;
-       unsigned int    fifo_size;
-       unsigned int    tx_loadsz;
+       unsigned short  fifo_size;
+       unsigned short  tx_loadsz;
+       unsigned char   fcr;
        unsigned int    flags;
 };
 
 #define UART_CAP_FIFO  (1 << 8)        /* UART has FIFO */
 #define UART_CAP_EFR   (1 << 9)        /* UART has EFR */
 #define UART_CAP_SLEEP (1 << 10)       /* UART has IER sleep */
+#define UART_CAP_AFE   (1 << 11)       /* MCR-based hw flow control */
+#define UART_CAP_UUE   (1 << 12)       /* UART needs IER bit 6 set (Xscale) */
 
-#undef SERIAL_DEBUG_PCI
-
-#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
-#define SERIAL_INLINE
-#endif
-  
-#ifdef SERIAL_INLINE
-#define _INLINE_ inline
-#else
-#define _INLINE_
-#endif
+#define UART_BUG_QUOT  (1 << 0)        /* UART has buggy quot LSB */
+#define UART_BUG_TXEN  (1 << 1)        /* UART has buggy TX IIR status */
+#define UART_BUG_NOMSR (1 << 2)        /* UART has buggy MSR status bits (Au1x00) */
 
 #define PROBE_RSA      (1 << 0)
 #define PROBE_ANY      (~0)
@@ -69,3 +60,21 @@ struct serial8250_config {
 #else
 #define SERIAL8250_SHARE_IRQS 0
 #endif
+
+#if defined(__alpha__) && !defined(CONFIG_PCI)
+/*
+ * Digital did something really horribly wrong with the OUT1 and OUT2
+ * lines on at least some ALPHA's.  The failure mode is that if either
+ * is cleared, the machine locks up with endless interrupts.
+ */
+#define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
+#elif defined(CONFIG_SBC8560)
+/*
+ * WindRiver did something similarly broken on their SBC8560 board. The
+ * UART tristates its IRQ output while OUT2 is clear, but they pulled
+ * the interrupt line _up_ instead of down, so if we register the IRQ
+ * while the UART is in that state, we die in an IRQ storm. */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#else
+#define ALPHA_KLUDGE_MCR 0
+#endif