* required, these have to be supplied via some other means (eg, GPIO)
* and hooked into this driver.
*/
-#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/module.h>
-#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/init.h>
-#include <linux/serial.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/device.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
-
-#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/clk.h>
-#include <asm/hardware/amba_serial.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
#define UART_NR 14
#define AMBA_ISR_PASS_LIMIT 256
-#define UART_DUMMY_RSR_RX 256
+#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
+#define UART_DUMMY_DR_RX (1 << 16)
/*
* We wrap our port structure around the generic uart_port.
unsigned int old_status;
};
-static void pl011_stop_tx(struct uart_port *port, unsigned int tty_stop)
+static void pl011_stop_tx(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
writew(uap->im, uap->port.membase + UART011_IMSC);
}
-static void pl011_start_tx(struct uart_port *port, unsigned int tty_start)
+static void pl011_start_tx(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
writew(uap->im, uap->port.membase + UART011_IMSC);
}
-static void
-#ifdef SUPPORT_SYSRQ
-pl011_rx_chars(struct uart_amba_port *uap, struct pt_regs *regs)
-#else
-pl011_rx_chars(struct uart_amba_port *uap)
-#endif
+static void pl011_rx_chars(struct uart_amba_port *uap)
{
struct tty_struct *tty = uap->port.info->tty;
- unsigned int status, ch, rsr, max_count = 256;
+ unsigned int status, ch, flag, max_count = 256;
status = readw(uap->port.membase + UART01x_FR);
while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty->flip.work.func((void *)tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- printk(KERN_WARNING "TTY_DONT_FLIP set\n");
- return;
- }
- }
-
- ch = readw(uap->port.membase + UART01x_DR);
-
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
+ flag = TTY_NORMAL;
uap->port.icount.rx++;
/*
* Note that the error handling code is
* out of the main execution path
*/
- rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
- if (rsr & UART01x_RSR_ANY) {
- if (rsr & UART01x_RSR_BE) {
- rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+ if (unlikely(ch & UART_DR_ERROR)) {
+ if (ch & UART011_DR_BE) {
+ ch &= ~(UART011_DR_FE | UART011_DR_PE);
uap->port.icount.brk++;
if (uart_handle_break(&uap->port))
goto ignore_char;
- } else if (rsr & UART01x_RSR_PE)
+ } else if (ch & UART011_DR_PE)
uap->port.icount.parity++;
- else if (rsr & UART01x_RSR_FE)
+ else if (ch & UART011_DR_FE)
uap->port.icount.frame++;
- if (rsr & UART01x_RSR_OE)
+ if (ch & UART011_DR_OE)
uap->port.icount.overrun++;
- rsr &= uap->port.read_status_mask;
+ ch &= uap->port.read_status_mask;
- if (rsr & UART01x_RSR_BE)
- *tty->flip.flag_buf_ptr = TTY_BREAK;
- else if (rsr & UART01x_RSR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
- else if (rsr & UART01x_RSR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ if (ch & UART011_DR_BE)
+ flag = TTY_BREAK;
+ else if (ch & UART011_DR_PE)
+ flag = TTY_PARITY;
+ else if (ch & UART011_DR_FE)
+ flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&uap->port, ch, regs))
+ if (uart_handle_sysrq_char(&uap->port, ch & 255))
goto ignore_char;
- if ((rsr & uap->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((rsr & UART01x_RSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- *tty->flip.char_buf_ptr++ = 0;
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
- tty->flip.count++;
- }
+ uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
+
ignore_char:
status = readw(uap->port.membase + UART01x_FR);
}
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
- pl011_stop_tx(&uap->port, 0);
+ pl011_stop_tx(&uap->port);
return;
}
uart_write_wakeup(&uap->port);
if (uart_circ_empty(xmit))
- pl011_stop_tx(&uap->port, 0);
+ pl011_stop_tx(&uap->port);
}
static void pl011_modem_status(struct uart_amba_port *uap)
wake_up_interruptible(&uap->port.info->delta_msr_wait);
}
-static irqreturn_t pl011_int(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t pl011_int(int irq, void *dev_id)
{
struct uart_amba_port *uap = dev_id;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
uap->port.membase + UART011_ICR);
if (status & (UART011_RTIS|UART011_RXIS))
-#ifdef SUPPORT_SYSRQ
- pl011_rx_chars(uap, regs);
-#else
pl011_rx_chars(uap);
-#endif
if (status & (UART011_DSRMIS|UART011_DCDMIS|
UART011_CTSMIS|UART011_RIMIS))
pl011_modem_status(uap);
}
static void
-pl011_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int lcr_h, old_cr;
unsigned long flags;
*/
uart_update_timeout(port, termios->c_cflag, baud);
- port->read_status_mask = UART01x_RSR_OE;
+ port->read_status_mask = UART011_DR_OE | 255;
if (termios->c_iflag & INPCK)
- port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= UART01x_RSR_BE;
+ port->read_status_mask |= UART011_DR_BE;
/*
* Characters to ignore
*/
port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= UART01x_RSR_BE;
+ port->ignore_status_mask |= UART011_DR_BE;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART01x_RSR_OE;
+ port->ignore_status_mask |= UART011_DR_OE;
}
/*
* Ignore all characters if CREAD is not set.
*/
if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+ port->ignore_status_mask |= UART_DUMMY_DR_RX;
if (UART_ENABLE_MS(port, termios->c_cflag))
pl011_enable_ms(port);
#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
-static inline void
-pl011_console_write_char(struct uart_amba_port *uap, char ch)
+static void pl011_console_putchar(struct uart_port *port, int ch)
{
- unsigned int status;
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
- do {
- status = readw(uap->port.membase + UART01x_FR);
- } while (status & UART01x_FR_TXFF);
+ while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ barrier();
writew(ch, uap->port.membase + UART01x_DR);
}
{
struct uart_amba_port *uap = amba_ports[co->index];
unsigned int status, old_cr, new_cr;
- int i;
clk_enable(uap->clk);
new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(new_cr, uap->port.membase + UART011_CR);
- /*
- * Now, do each character
- */
- for (i = 0; i < count; i++) {
- pl011_console_write_char(uap, s[i]);
- if (s[i] == '\n')
- pl011_console_write_char(uap, '\r');
- }
+ uart_console_write(&uap->port, s, count, pl011_console_putchar);
/*
* Finally, wait for transmitter to become empty
if (co->index >= UART_NR)
co->index = 0;
uap = amba_ports[co->index];
+ if (!uap)
+ return -ENODEV;
uap->port.uartclk = clk_get_rate(uap->clk);
return uart_set_options(&uap->port, co, baud, parity, bits, flow);
}
-extern struct uart_driver amba_reg;
+static struct uart_driver amba_reg;
static struct console amba_console = {
.name = "ttyAMA",
.write = pl011_console_write,
static int pl011_probe(struct amba_device *dev, void *id)
{
struct uart_amba_port *uap;
- void *base;
+ void __iomem *base;
int i, ret;
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
goto unmap;
}
- ret = clk_use(uap->clk);
- if (ret)
- goto putclk;
-
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
if (ret) {
amba_set_drvdata(dev, NULL);
amba_ports[i] = NULL;
- clk_unuse(uap->clk);
- putclk:
clk_put(uap->clk);
unmap:
iounmap(base);
amba_ports[i] = NULL;
iounmap(uap->port.membase);
- clk_unuse(uap->clk);
clk_put(uap->clk);
kfree(uap);
return 0;