*
* Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
*
- * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
- *
+ *
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
+ * (C) 2006 MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
void smc1_lineif(struct uart_cpm_port *pinfo)
{
- volatile cpm8xx_t *cp = cpmp;
- unsigned int iobits = 0x000000c0;
-
- if (!pinfo->is_portb) {
- cp->cp_pbpar |= iobits;
- cp->cp_pbdir &= ~iobits;
- cp->cp_pbodr &= ~iobits;
- } else {
- ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
- ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
- ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
- }
-
pinfo->brg = 1;
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
- /* XXX SMC2: insert port configuration here */
pinfo->brg = 2;
}
}
/*
- * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
* receive buffer descriptors from dual port ram, and a character
* buffer area from host mem. If we are allocating for the console we need
* to do it from bootmem
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
- mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
- dma_addr = 0;
+ /* was hostalloc but changed cause it blows away the */
+ /* large tlb mapping when pinning the kernel area */
+ mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
+ dma_addr = (u32)mem_addr;
} else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
}
pinfo->dp_addr = dp_offset;
- pinfo->mem_addr = mem_addr;
- pinfo->dma_addr = dma_addr;
+ pinfo->mem_addr = mem_addr; /* virtual address*/
+ pinfo->dma_addr = dma_addr; /* physical address*/
+ pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
}
/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
+int __init cpm_uart_init_portdesc(void)
{
pr_debug("CPM uart[-]:init portdesc\n");