* Some of the code has been inspired/copied from the 2.4 code written
* by Dale Farnsworth <dfarnsworth@mvista.com>.
*
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
* Copyright (C) 2003 MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* kind, whether express or implied.
*/
-/* OCP Usage :
+/* Platform device Usage :
*
- * This drivers uses the OCP model. To load the serial driver for one of the
- * PSCs, just add this to the core_ocp table :
+ * Since PSCs can have multiple function, the correct driver for each one
+ * is selected by calling mpc52xx_match_psc_function(...). The function
+ * handled by this driver is "uart".
*
- * {
- * .vendor = OCP_VENDOR_FREESCALE,
- * .function = OCP_FUNC_PSC_UART,
- * .index = 0,
- * .paddr = MPC52xx_PSC1,
- * .irq = MPC52xx_PSC1_IRQ,
- * .pm = OCP_CPM_NA,
- * },
- *
- * This is for PSC1, replace the paddr and irq according to the PSC you want to
- * use. The driver all necessary registers to place the PSC in uart mode without
+ * The driver init all necessary registers to place the PSC in uart mode without
* DCD. However, the pin multiplexing aren't changed and should be set either
* by the bootloader or in the platform init code.
- * The index field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyS0, PSC2 to /dev/ttyS1 and so
- * on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly for
- * the console code : without this 1:1 mapping, at early boot time, when we are
- * parsing the kernel args console=ttyS?, we wouldn't know wich PSC it will be
- * mapped to because OCP stuff is not yet initialized.
+ *
+ * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
+ * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
+ * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
+ * fpr the console code : without this 1:1 mapping, at early boot time, when we
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
+ * will be mapped to.
*/
#include <linux/config.h>
+#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <asm/delay.h>
#include <asm/io.h>
-#include <asm/ocp.h>
#include <asm/mpc52xx.h>
#include <asm/mpc52xx_psc.h>
#include <linux/serial_core.h>
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_PSC_MAJOR 204
+#define SERIAL_PSC_MINOR 148
+
#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
* the console_init
*/
-#define PSC(port) ((struct mpc52xx_psc *)((port)->membase))
+#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
/* Forward declaration of the interruption handling routine */
}
static void
-mpc52xx_uart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+mpc52xx_uart_stop_tx(struct uart_port *port)
{
/* port->lock taken by caller */
port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
}
static void
-mpc52xx_uart_start_tx(struct uart_port *port, unsigned int tty_start)
+mpc52xx_uart_start_tx(struct uart_port *port)
{
/* port->lock taken by caller */
port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
static int
mpc52xx_uart_startup(struct uart_port *port)
{
- struct mpc52xx_psc *psc = PSC(port);
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+ int ret;
+
+ /* Request IRQ */
+ ret = request_irq(port->irq, mpc52xx_uart_int,
+ SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
+ if (ret)
+ return ret;
/* Reset/activate the port, clear and enable interrupts */
out_8(&psc->command,MPC52xx_PSC_RST_RX);
static void
mpc52xx_uart_shutdown(struct uart_port *port)
{
- struct mpc52xx_psc *psc = PSC(port);
+ struct mpc52xx_psc __iomem *psc = PSC(port);
/* Shut down the port, interrupt and all */
out_8(&psc->command,MPC52xx_PSC_RST_RX);
port->read_status_mask = 0;
out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+
+ /* Release interrupt */
+ free_irq(port->irq, port);
}
static void
mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
struct termios *old)
{
- struct mpc52xx_psc *psc = PSC(port);
+ struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned long flags;
unsigned char mr1, mr2;
unsigned short ctr;
iounmap(port->membase);
port->membase = NULL;
}
+
+ release_mem_region(port->mapbase, MPC52xx_PSC_SIZE);
}
static int
mpc52xx_uart_request_port(struct uart_port *port)
{
if (port->flags & UPF_IOREMAP) /* Need to remap ? */
- port->membase = ioremap(port->mapbase, sizeof(struct mpc52xx_psc));
-
- return port->membase != NULL ? 0 : -EBUSY;
+ port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
+
+ if (!port->membase)
+ return -EINVAL;
+
+ return request_mem_region(port->mapbase, MPC52xx_PSC_SIZE,
+ "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
}
static void
if ( (ser->irq != port->irq) ||
(ser->io_type != SERIAL_IO_MEM) ||
(ser->baud_base != port->uartclk) ||
- // FIXME Should check addresses/irq as well ?
+ (ser->iomem_base != (void*)port->mapbase) ||
(ser->hub6 != 0 ) )
return -EINVAL;
mpc52xx_uart_int_rx_chars(struct uart_port *port, struct pt_regs *regs)
{
struct tty_struct *tty = port->info->tty;
- unsigned char ch;
+ unsigned char ch, flag;
unsigned short status;
/* While we can read, do so ! */
while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
MPC52xx_PSC_SR_RXRDY) {
- /* If we are full, just stop reading */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
/* Get the char */
ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
#endif
/* Store it */
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = 0;
+
+ flag = TTY_NORMAL;
port->icount.rx++;
if ( status & (MPC52xx_PSC_SR_PE |
MPC52xx_PSC_SR_FE |
- MPC52xx_PSC_SR_RB |
- MPC52xx_PSC_SR_OE) ) {
+ MPC52xx_PSC_SR_RB) ) {
if (status & MPC52xx_PSC_SR_RB) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
uart_handle_break(port);
} else if (status & MPC52xx_PSC_SR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & MPC52xx_PSC_SR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- if (status & MPC52xx_PSC_SR_OE) {
- /*
- * Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- if (tty->flip.count < (TTY_FLIPBUF_SIZE-1)) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
+ flag = TTY_FRAME;
/* Clear error condition */
out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT);
}
-
- tty->flip.char_buf_ptr++;
- tty->flip.flag_buf_ptr++;
- tty->flip.count++;
-
+ tty_insert_flip_char(tty, ch, flag);
+ if (status & MPC52xx_PSC_SR_OE) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
}
tty_flip_buffer_push(tty);
/* Nothing to do ? */
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mpc52xx_uart_stop_tx(port,0);
+ mpc52xx_uart_stop_tx(port);
return 0;
}
/* Maybe we're done after all */
if (uart_circ_empty(xmit)) {
- mpc52xx_uart_stop_tx(port,0);
+ mpc52xx_uart_stop_tx(port);
return 0;
}
mpc52xx_console_get_options(struct uart_port *port,
int *baud, int *parity, int *bits, int *flow)
{
- struct mpc52xx_psc *psc = PSC(port);
+ struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned char mr1;
/* Read the mode registers */
mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_port *port = &mpc52xx_uart_ports[co->index];
- struct mpc52xx_psc *psc = PSC(port);
+ struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned int i, j;
/* Disable interrupts */
udelay(1);
/* Write all the chars */
- for ( i=0 ; i<count ; i++ ) {
-
- /* Send the char */
- out_8(&psc->mpc52xx_psc_buffer_8, *s);
-
+ for (i = 0; i < count; i++, s++) {
/* Line return handling */
- if ( *s++ == '\n' )
+ if (*s == '\n')
out_8(&psc->mpc52xx_psc_buffer_8, '\r');
+ /* Send the char */
+ out_8(&psc->mpc52xx_psc_buffer_8, *s);
+
/* Wait the TX buffer to be empty */
j = 20000; /* Maximum wait */
while (!(in_be16(&psc->mpc52xx_psc_status) &
{
struct uart_port *port = &mpc52xx_uart_ports[co->index];
- int baud = 9600;
+ int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
int bits = 8;
int parity = 'n';
int flow = 'n';
spin_lock_init(&port->lock);
port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
port->ops = &mpc52xx_uart_ops;
- port->mapbase = MPC52xx_PSCx(co->index);
+ port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
- /* We ioremap ourself */
- port->membase = ioremap(port->mapbase, sizeof(struct mpc52xx_psc));
- if (port->membase == NULL) {
- release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
- return -EBUSY;
- }
+ /* We ioremap ourself */
+ port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
+ if (port->membase == NULL)
+ return -EINVAL;
/* Setup the port parameters accoding to options */
if (options)
}
-extern struct uart_driver mpc52xx_uart_driver;
+static struct uart_driver mpc52xx_uart_driver;
static struct console mpc52xx_console = {
- .name = "ttyS",
+ .name = "ttyPSC",
.write = mpc52xx_console_write,
.device = uart_console_device,
.setup = mpc52xx_console_setup,
.flags = CON_PRINTBUFFER,
- .index = -1, /* Specified on the cmdline (e.g. console=ttyS0 ) */
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0 ) */
.data = &mpc52xx_uart_driver,
};
static struct uart_driver mpc52xx_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "mpc52xx_psc_uart",
- .dev_name = "ttyS",
- .devfs_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
+ .dev_name = "ttyPSC",
+ .devfs_name = "ttyPSC",
+ .major = SERIAL_PSC_MAJOR,
+ .minor = SERIAL_PSC_MINOR,
.nr = MPC52xx_PSC_MAXNUM,
.cons = MPC52xx_PSC_CONSOLE,
};
/* ======================================================================== */
-/* OCP Driver */
+/* Platform Driver */
/* ======================================================================== */
static int __devinit
-mpc52xx_uart_probe(struct ocp_device *ocp)
+mpc52xx_uart_probe(struct platform_device *dev)
{
+ struct resource *res = dev->resource;
+
struct uart_port *port = NULL;
- int idx, ret;
+ int i, idx, ret;
- /* Get the corresponding port struct */
- idx = ocp->def->index;
+ /* Check validity & presence */
+ idx = dev->id;
if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
return -EINVAL;
-
- port = &mpc52xx_uart_ports[idx];
+
+ if (!mpc52xx_match_psc_function(idx,"uart"))
+ return -ENODEV;
/* Init the port structure */
+ port = &mpc52xx_uart_ports[idx];
+
+ memset(port, 0x00, sizeof(struct uart_port));
+
spin_lock_init(&port->lock);
- port->mapbase = ocp->def->paddr;
- port->irq = ocp->def->irq;
port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
port->fifosize = 255; /* Should be 512 ! But it can't be */
/* stored in a unsigned char */
( uart_console(port) ? 0 : UPF_IOREMAP );
port->line = idx;
port->ops = &mpc52xx_uart_ops;
- port->read_status_mask = 0;
-
- /* Requests the mem & irqs */
- /* Unlike other serial drivers, we reserve the resources here, so we
- * can detect early if multiple drivers uses the same PSC. Special
- * care must be taken with the console PSC
- */
- ret = request_irq(
- port->irq, mpc52xx_uart_int,
- SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
- if (ret)
- goto error;
- ret = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc),
- "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
- if (ret)
- goto free_irq;
+ /* Search for IRQ and mapbase */
+ for (i=0 ; i<dev->num_resources ; i++, res++) {
+ if (res->flags & IORESOURCE_MEM)
+ port->mapbase = res->start;
+ else if (res->flags & IORESOURCE_IRQ)
+ port->irq = res->start;
+ }
+ if (!port->irq || !port->mapbase)
+ return -EINVAL;
/* Add the port to the uart sub-system */
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (ret)
- goto release_mem;
-
- ocp_set_drvdata(ocp, (void*)port);
-
- return 0;
-
-
-free_irq:
- free_irq(port->irq, mpc52xx_uart_int);
-
-release_mem:
- release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
-
-error:
- if (uart_console(port))
- printk( "mpc52xx_uart.c: Error during resource alloction for "
- "the console port !!! Check that the console PSC is "
- "not used by another OCP driver !!!\n" );
+ if (!ret)
+ platform_set_drvdata(dev, (void*)port);
return ret;
}
-static void
-mpc52xx_uart_remove(struct ocp_device *ocp)
+static int
+mpc52xx_uart_remove(struct platform_device *dev)
{
- struct uart_port *port = (struct uart_port *) ocp_get_drvdata(ocp);
+ struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
- ocp_set_drvdata(ocp, NULL);
+ platform_set_drvdata(dev, NULL);
- if (port) {
+ if (port)
uart_remove_one_port(&mpc52xx_uart_driver, port);
- release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
- free_irq(port->irq, mpc52xx_uart_int);
- }
+
+ return 0;
}
#ifdef CONFIG_PM
static int
-mpc52xx_uart_suspend(struct ocp_device *ocp, u32 state)
+mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
{
- struct uart_port *port = (struct uart_port *) ocp_get_drvdata(ocp);
+ struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
- uart_suspend_port(&mpc52xx_uart_driver, port);
+ if (sport)
+ uart_suspend_port(&mpc52xx_uart_driver, port);
return 0;
}
static int
-mpc52xx_uart_resume(struct ocp_device *ocp)
+mpc52xx_uart_resume(struct platform_device *dev)
{
- struct uart_port *port = (struct uart_port *) ocp_get_drvdata(ocp);
+ struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
- uart_resume_port(&mpc52xx_uart_driver, port);
+ if (port)
+ uart_resume_port(&mpc52xx_uart_driver, port);
return 0;
}
#endif
-static struct ocp_device_id mpc52xx_uart_ids[] __devinitdata = {
- { .vendor = OCP_VENDOR_FREESCALE, .function = OCP_FUNC_PSC_UART },
- { .vendor = OCP_VENDOR_INVALID /* Terminating entry */ }
-};
-
-MODULE_DEVICE_TABLE(ocp, mpc52xx_uart_ids);
-
-static struct ocp_driver mpc52xx_uart_ocp_driver = {
- .name = "mpc52xx_psc_uart",
- .id_table = mpc52xx_uart_ids,
+static struct platform_driver mpc52xx_uart_platform_driver = {
.probe = mpc52xx_uart_probe,
.remove = mpc52xx_uart_remove,
#ifdef CONFIG_PM
.suspend = mpc52xx_uart_suspend,
.resume = mpc52xx_uart_resume,
#endif
+ .driver = {
+ .name = "mpc52xx-psc",
+ },
};
printk(KERN_INFO "Serial: MPC52xx PSC driver\n");
ret = uart_register_driver(&mpc52xx_uart_driver);
- if (ret)
- return ret;
-
- ret = ocp_register_driver(&mpc52xx_uart_ocp_driver);
+ if (ret == 0) {
+ ret = platform_driver_register(&mpc52xx_uart_platform_driver);
+ if (ret)
+ uart_unregister_driver(&mpc52xx_uart_driver);
+ }
return ret;
}
static void __exit
mpc52xx_uart_exit(void)
{
- ocp_unregister_driver(&mpc52xx_uart_ocp_driver);
+ platform_driver_unregister(&mpc52xx_uart_platform_driver);
uart_unregister_driver(&mpc52xx_uart_driver);
}