* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/slab.h>
*/
static DEFINE_MUTEX(port_mutex);
+/*
+ * lockdep: port->lock is initialized in two places, but we
+ * want only one lock-class:
+ */
+static struct lock_class_key port_lock_key;
+
#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->blocked_open : 0))
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state, struct termios *old_termios);
+static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
* we're actually going to be using.
*/
unsigned int
-uart_get_baud_rate(struct uart_port *port, struct termios *termios,
- struct termios *old, unsigned int min, unsigned int max)
+uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old, unsigned int min, unsigned int max)
{
unsigned int try, baud, altbaud = 38400;
upf_t flags = port->flags & UPF_SPD_MASK;
EXPORT_SYMBOL(uart_get_divisor);
static void
-uart_change_speed(struct uart_state *state, struct termios *old_termios)
+uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
struct tty_struct *tty = state->info->tty;
struct uart_port *port = state->port;
- struct termios *termios;
+ struct ktermios *termios;
/*
* If we have no tty, termios, or the port does not exist,
(new_serial.baud_base != port->uartclk / 16) ||
(close_delay != state->close_delay) ||
(closing_wait != state->closing_wait) ||
- (new_serial.xmit_fifo_size != port->fifosize) ||
+ (new_serial.xmit_fifo_size &&
+ new_serial.xmit_fifo_size != port->fifosize) ||
(((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
goto exit;
port->flags = ((port->flags & ~UPF_USR_MASK) |
* We failed anyway.
*/
retval = -EBUSY;
+ goto exit; // Added to return the correct error -Ram Gupta
}
}
port->custom_divisor = new_serial.custom_divisor;
state->close_delay = close_delay;
state->closing_wait = closing_wait;
- port->fifosize = new_serial.xmit_fifo_size;
+ if (new_serial.xmit_fifo_size)
+ port->fifosize = new_serial.xmit_fifo_size;
if (state->info->tty)
state->info->tty->low_latency =
(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
return ret;
}
-static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
- int ret;
+ int mmio, ret;
if (!port)
return 0;
+ mmio = port->iotype >= UPIO_MEM;
ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
port->line, uart_type(port),
- port->iotype == UPIO_MEM ? "mmio:0x" : "port:",
- port->iotype == UPIO_MEM ? port->mapbase :
- (unsigned long) port->iobase,
+ mmio ? "mmio:0x" : "port:",
+ mmio ? port->mapbase : (unsigned long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
uart_set_options(struct uart_port *port, struct console *co,
int baud, int parity, int bits, int flow)
{
- struct termios termios;
+ struct ktermios termios;
int i;
/*
* early.
*/
spin_lock_init(&port->lock);
+ lockdep_set_class(&port->lock, &port_lock_key);
- memset(&termios, 0, sizeof(struct termios));
+ memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = CREAD | HUPCL | CLOCAL;
mutex_lock(&state->mutex);
+#ifdef CONFIG_DISABLE_CONSOLE_SUSPEND
+ if (uart_console(port)) {
+ mutex_unlock(&state->mutex);
+ return 0;
+ }
+#endif
+
if (state->info && state->info->flags & UIF_INITIALIZED) {
const struct uart_ops *ops = port->ops;
+ state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
+ | UIF_SUSPENDED;
+
spin_lock_irq(&port->lock);
ops->stop_tx(port);
ops->set_mctrl(port, 0);
mutex_lock(&state->mutex);
+#ifdef CONFIG_DISABLE_CONSOLE_SUSPEND
+ if (uart_console(port)) {
+ mutex_unlock(&state->mutex);
+ return 0;
+ }
+#endif
+
uart_change_pm(state, 0);
/*
* Re-enable the console device after suspending.
*/
if (uart_console(port)) {
- struct termios termios;
+ struct ktermios termios;
/*
- * Get the termios for this line
+ * First try to use the console cflag setting.
*/
- tty_get_termios(drv->tty_driver, port->line, &termios);
+ memset(&termios, 0, sizeof(struct ktermios));
+ termios.c_cflag = port->cons->cflag;
/*
- * If the console cflag is still set, subsitute that
- * for the termios cflag.
+ * If that's unset, use the tty termios setting.
*/
- if (port->cons->cflag)
- termios.c_cflag = port->cons->cflag;
+ if (state->info && state->info->tty && termios.c_cflag == 0)
+ termios = *state->info->tty->termios;
port->ops->set_termios(port, &termios, NULL);
console_start(port->cons);
}
- if (state->info && state->info->flags & UIF_INITIALIZED) {
+ if (state->info && state->info->flags & UIF_SUSPENDED) {
const struct uart_ops *ops = port->ops;
int ret;
ops->set_mctrl(port, port->mctrl);
ops->start_tx(port);
spin_unlock_irq(&port->lock);
+ state->info->flags |= UIF_INITIALIZED;
} else {
/*
* Failed to resume - maybe hardware went away?
* Clear the "initialized" flag so we won't try
* to call the low level drivers shutdown method.
*/
- state->info->flags &= ~UIF_INITIALIZED;
uart_shutdown(state);
}
+
+ state->info->flags &= ~UIF_SUSPENDED;
}
mutex_unlock(&state->mutex);
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
+ case UPIO_TSI:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
}
}
-static struct tty_operations uart_ops = {
+static const struct tty_operations uart_ops = {
.open = uart_open,
.close = uart_close,
.write = uart_write,
normal->owner = drv->owner;
normal->driver_name = drv->driver_name;
- normal->devfs_name = drv->devfs_name;
normal->name = drv->dev_name;
normal->major = drv->major;
normal->minor_start = drv->minor;
normal->subtype = SERIAL_TYPE_NORMAL;
normal->init_termios = tty_std_termios;
normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+ normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600;
+ normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
normal->driver_state = drv;
tty_set_operations(normal, &uart_ops);
* If this port is a console, then the spinlock is already
* initialised.
*/
- if (!(uart_console(port) && (port->cons->flags & CON_ENABLED)))
+ if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
spin_lock_init(&port->lock);
+ lockdep_set_class(&port->lock, &port_lock_key);
+ }
uart_configure_port(drv, state, port);
mutex_unlock(&state->mutex);
/*
- * Remove the devices from devfs
+ * Remove the devices from the tty layer
*/
tty_unregister_device(drv->tty_driver, port->line);
return (port1->iobase == port2->iobase) &&
(port1->hub6 == port2->hub6);
case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_AU:
+ case UPIO_TSI:
return (port1->mapbase == port2->mapbase);
}
return 0;