* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
#include <asm/scatterlist.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
+#include <linux/platform_device.h>
#include <linux/usb.h>
static struct usb_busmap busmap;
/* used when updating list of hcds */
-DECLARE_MUTEX (usb_bus_list_lock); /* exported only for usbfs */
+DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
EXPORT_SYMBOL_GPL (usb_bus_list_lock);
/* used for controlling access to virtual root hubs */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
0x05, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+ * see hub.c:hub_configure() for details. */
+ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
};
// id 3 == vendor description
} else if (id == 3) {
- snprintf (buf, sizeof buf, "%s %s %s", system_utsname.sysname,
- system_utsname.release, hcd->driver->description);
+ snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
+ init_utsname()->release, hcd->driver->description);
// unsupported IDs --> "protocol stall"
} else
struct usb_ctrlrequest *cmd;
u16 typeReq, wValue, wIndex, wLength;
u8 *ubuf = urb->transfer_buffer;
- u8 tbuf [sizeof (struct usb_hub_descriptor)];
+ u8 tbuf [sizeof (struct usb_hub_descriptor)]
+ __attribute__((aligned(4)));
const u8 *bufp = tbuf;
int len = 0;
int patch_wakeup = 0;
/* DEVICE REQUESTS */
+ /* The root hub's remote wakeup enable bit is implemented using
+ * driver model wakeup flags. If this system supports wakeup
+ * through USB, userspace may change the default "allow wakeup"
+ * policy through sysfs or these calls.
+ *
+ * Most root hubs support wakeup from downstream devices, for
+ * runtime power management (disabling USB clocks and reducing
+ * VBUS power usage). However, not all of them do so; silicon,
+ * board, and BIOS bugs here are not uncommon, so these can't
+ * be treated quite like external hubs.
+ *
+ * Likewise, not all root hubs will pass wakeup events upstream,
+ * to wake up the whole system. So don't assume root hub and
+ * controller capabilities are identical.
+ */
+
case DeviceRequest | USB_REQ_GET_STATUS:
- tbuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP)
+ tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+ << USB_DEVICE_REMOTE_WAKEUP)
| (1 << USB_DEVICE_SELF_POWERED);
tbuf [1] = 0;
len = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (wValue == USB_DEVICE_REMOTE_WAKEUP)
- hcd->remote_wakeup = 0;
+ device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
else
goto error;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
- if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP)
- hcd->remote_wakeup = 1;
+ if (device_can_wakeup(&hcd->self.root_hub->dev)
+ && wValue == USB_DEVICE_REMOTE_WAKEUP)
+ device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
else
goto error;
break;
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
}
- if (hcd->can_wakeup)
+ if (device_can_wakeup(&hcd->self.root_hub->dev))
patch_wakeup = 1;
break;
case USB_DT_STRING << 8:
default:
/* non-generic request */
- if (HC_IS_SUSPENDED (hcd->state))
- status = -EAGAIN;
- else {
- switch (typeReq) {
- case GetHubStatus:
- case GetPortStatus:
- len = 4;
- break;
- case GetHubDescriptor:
- len = sizeof (struct usb_hub_descriptor);
- break;
- }
- status = hcd->driver->hub_control (hcd,
- typeReq, wValue, wIndex,
- tbuf, wLength);
+ switch (typeReq) {
+ case GetHubStatus:
+ case GetPortStatus:
+ len = 4;
+ break;
+ case GetHubDescriptor:
+ len = sizeof (struct usb_hub_descriptor);
+ break;
}
+ status = hcd->driver->hub_control (hcd,
+ typeReq, wValue, wIndex,
+ tbuf, wLength);
break;
error:
/* "protocol stall" on error */
"CTRL: TypeReq=0x%x val=0x%x "
"idx=0x%x len=%d ==> %d\n",
typeReq, wValue, wIndex,
- wLength, urb->status);
+ wLength, status);
}
}
if (len) {
if (urb->status == -EINPROGRESS)
urb->status = status;
spin_unlock (&urb->lock);
- usb_hcd_giveback_urb (hcd, urb, NULL);
+ usb_hcd_giveback_urb (hcd, urb);
local_irq_restore (flags);
return 0;
}
/*-------------------------------------------------------------------------*/
/*
- * Root Hub interrupt transfers are synthesized with a timer.
- * Completions are called in_interrupt() but not in_irq().
+ * Root Hub interrupt transfers are polled using a timer if the
+ * driver requests it; otherwise the driver is responsible for
+ * calling usb_hcd_poll_rh_status() when an event occurs.
*
- * Note: some root hubs (including common UHCI based designs) can't
- * correctly issue port change IRQs. They're the ones that _need_ a
- * timer; most other root hubs don't. Some systems could save a
- * lot of battery power by eliminating these root hub timer IRQs.
+ * Completions are called in_interrupt(), but they may or may not
+ * be in_irq().
*/
+void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
+{
+ struct urb *urb;
+ int length;
+ unsigned long flags;
+ char buffer[4]; /* Any root hubs with > 31 ports? */
-static void rh_report_status (unsigned long ptr);
+ if (!hcd->uses_new_polling && !hcd->status_urb)
+ return;
-static int rh_status_urb (struct usb_hcd *hcd, struct urb *urb)
-{
- int len = 1 + (urb->dev->maxchild / 8);
+ length = hcd->driver->hub_status_data(hcd, buffer);
+ if (length > 0) {
- /* rh_timer protected by hcd_data_lock */
- if (hcd->rh_timer.data || urb->transfer_buffer_length < len) {
- dev_dbg (hcd->self.controller,
- "not queuing rh status urb, stat %d\n",
- urb->status);
- return -EINVAL;
+ /* try to complete the status urb */
+ local_irq_save (flags);
+ spin_lock(&hcd_root_hub_lock);
+ urb = hcd->status_urb;
+ if (urb) {
+ spin_lock(&urb->lock);
+ if (urb->status == -EINPROGRESS) {
+ hcd->poll_pending = 0;
+ hcd->status_urb = NULL;
+ urb->status = 0;
+ urb->hcpriv = NULL;
+ urb->actual_length = length;
+ memcpy(urb->transfer_buffer, buffer, length);
+ } else /* urb has been unlinked */
+ length = 0;
+ spin_unlock(&urb->lock);
+ } else
+ length = 0;
+ spin_unlock(&hcd_root_hub_lock);
+
+ /* local irqs are always blocked in completions */
+ if (length > 0)
+ usb_hcd_giveback_urb (hcd, urb);
+ else
+ hcd->poll_pending = 1;
+ local_irq_restore (flags);
}
- init_timer (&hcd->rh_timer);
- hcd->rh_timer.function = rh_report_status;
- hcd->rh_timer.data = (unsigned long) urb;
- /* USB 2.0 spec says 256msec; this is close enough */
- hcd->rh_timer.expires = jiffies + HZ/4;
- add_timer (&hcd->rh_timer);
- urb->hcpriv = hcd; /* nonzero to indicate it's queued */
- return 0;
+ /* The USB 2.0 spec says 256 ms. This is close enough and won't
+ * exceed that limit if HZ is 100. */
+ if (hcd->uses_new_polling ? hcd->poll_rh :
+ (length == 0 && hcd->status_urb != NULL))
+ mod_timer (&hcd->rh_timer, jiffies + msecs_to_jiffies(250));
}
+EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
/* timer callback */
+static void rh_timer_func (unsigned long _hcd)
+{
+ usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
+}
-static void rh_report_status (unsigned long ptr)
+/*-------------------------------------------------------------------------*/
+
+static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
{
- struct urb *urb;
- struct usb_hcd *hcd;
- int length = 0;
+ int retval;
unsigned long flags;
+ int len = 1 + (urb->dev->maxchild / 8);
- urb = (struct urb *) ptr;
- local_irq_save (flags);
- spin_lock (&urb->lock);
+ spin_lock_irqsave (&hcd_root_hub_lock, flags);
+ if (urb->status != -EINPROGRESS) /* already unlinked */
+ retval = urb->status;
+ else if (hcd->status_urb || urb->transfer_buffer_length < len) {
+ dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
+ retval = -EINVAL;
+ } else {
+ hcd->status_urb = urb;
+ urb->hcpriv = hcd; /* indicate it's queued */
- /* do nothing if the urb's been unlinked */
- if (!urb->dev
- || urb->status != -EINPROGRESS
- || (hcd = urb->dev->bus->hcpriv) == NULL) {
- spin_unlock (&urb->lock);
- local_irq_restore (flags);
- return;
- }
+ if (!hcd->uses_new_polling)
+ mod_timer (&hcd->rh_timer, jiffies +
+ msecs_to_jiffies(250));
- /* complete the status urb, or retrigger the timer */
- spin_lock (&hcd_data_lock);
- if (urb->dev->state == USB_STATE_CONFIGURED) {
- length = hcd->driver->hub_status_data (
- hcd, urb->transfer_buffer);
- if (length > 0) {
- hcd->rh_timer.data = 0;
- urb->actual_length = length;
- urb->status = 0;
- urb->hcpriv = NULL;
- } else
- mod_timer (&hcd->rh_timer, jiffies + HZ/4);
+ /* If a status change has already occurred, report it ASAP */
+ else if (hcd->poll_pending)
+ mod_timer (&hcd->rh_timer, jiffies);
+ retval = 0;
}
- spin_unlock (&hcd_data_lock);
- spin_unlock (&urb->lock);
-
- /* local irqs are always blocked in completions */
- if (length > 0)
- usb_hcd_giveback_urb (hcd, urb, NULL);
- local_irq_restore (flags);
+ spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+ return retval;
}
-/*-------------------------------------------------------------------------*/
-
static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
{
- if (usb_pipeint (urb->pipe)) {
- int retval;
- unsigned long flags;
-
- spin_lock_irqsave (&hcd_data_lock, flags);
- retval = rh_status_urb (hcd, urb);
- spin_unlock_irqrestore (&hcd_data_lock, flags);
- return retval;
- }
+ if (usb_pipeint (urb->pipe))
+ return rh_queue_status (hcd, urb);
if (usb_pipecontrol (urb->pipe))
return rh_call_control (hcd, urb);
- else
- return -EINVAL;
+ return -EINVAL;
}
/*-------------------------------------------------------------------------*/
+/* Unlinks of root-hub control URBs are legal, but they don't do anything
+ * since these URBs always execute synchronously.
+ */
static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
{
unsigned long flags;
- /* note: always a synchronous unlink */
- if ((unsigned long) urb == hcd->rh_timer.data) {
- del_timer_sync (&hcd->rh_timer);
- hcd->rh_timer.data = 0;
+ if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */
+ ; /* Do nothing */
+ } else { /* Status URB */
+ if (!hcd->uses_new_polling)
+ del_timer (&hcd->rh_timer);
local_irq_save (flags);
- urb->hcpriv = NULL;
- usb_hcd_giveback_urb (hcd, urb, NULL);
+ spin_lock (&hcd_root_hub_lock);
+ if (urb == hcd->status_urb) {
+ hcd->status_urb = NULL;
+ urb->hcpriv = NULL;
+ } else
+ urb = NULL; /* wasn't fully queued */
+ spin_unlock (&hcd_root_hub_lock);
+ if (urb)
+ usb_hcd_giveback_urb (hcd, urb);
local_irq_restore (flags);
-
- } else if (usb_pipeendpoint(urb->pipe) == 0) {
- spin_lock_irq(&urb->lock); /* from usb_kill_urb */
- ++urb->reject;
- spin_unlock_irq(&urb->lock);
-
- wait_event(usb_kill_urb_queue,
- atomic_read(&urb->use_count) == 0);
-
- spin_lock_irq(&urb->lock);
- --urb->reject;
- spin_unlock_irq(&urb->lock);
- } else
- return -EINVAL;
+ }
return 0;
}
/*-------------------------------------------------------------------------*/
-/* exported only within usbcore */
-struct usb_bus *usb_bus_get (struct usb_bus *bus)
-{
- struct class_device *tmp;
-
- if (!bus)
- return NULL;
-
- tmp = class_device_get(&bus->class_dev);
- if (tmp)
- return to_usb_bus(tmp);
- else
- return NULL;
-}
-
-/* exported only within usbcore */
-void usb_bus_put (struct usb_bus *bus)
-{
- if (bus)
- class_device_put(&bus->class_dev);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void usb_host_release(struct class_device *class_dev)
-{
- struct usb_bus *bus = to_usb_bus(class_dev);
-
- if (bus->release)
- bus->release(bus);
-}
-
-static struct class usb_host_class = {
- .name = "usb_host",
- .release = &usb_host_release,
-};
+static struct class *usb_host_class;
int usb_host_init(void)
{
- return class_register(&usb_host_class);
+ int retval = 0;
+
+ usb_host_class = class_create(THIS_MODULE, "usb_host");
+ if (IS_ERR(usb_host_class))
+ retval = PTR_ERR(usb_host_class);
+ return retval;
}
void usb_host_cleanup(void)
{
- class_unregister(&usb_host_class);
+ class_destroy(usb_host_class);
}
/**
bus->devnum_next = 1;
bus->root_hub = NULL;
- bus->hcpriv = NULL;
bus->busnum = -1;
bus->bandwidth_allocated = 0;
bus->bandwidth_int_reqs = 0;
bus->bandwidth_isoc_reqs = 0;
INIT_LIST_HEAD (&bus->bus_list);
-
- class_device_initialize(&bus->class_dev);
- bus->class_dev.class = &usb_host_class;
-}
-
-/**
- * usb_alloc_bus - creates a new USB host controller structure
- * @op: pointer to a struct usb_operations that this bus structure should use
- * Context: !in_interrupt()
- *
- * Creates a USB host controller bus structure with the specified
- * usb_operations and initializes all the necessary internal objects.
- *
- * If no memory is available, NULL is returned.
- *
- * The caller should call usb_put_bus() when it is finished with the structure.
- */
-struct usb_bus *usb_alloc_bus (struct usb_operations *op)
-{
- struct usb_bus *bus;
-
- bus = kmalloc (sizeof *bus, GFP_KERNEL);
- if (!bus)
- return NULL;
- memset(bus, 0, sizeof(struct usb_bus));
- usb_bus_init (bus);
- bus->op = op;
- return bus;
}
/*-------------------------------------------------------------------------*/
static int usb_register_bus(struct usb_bus *bus)
{
int busnum;
- int retval;
- down (&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
if (busnum < USB_MAXBUS) {
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
} else {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
- up(&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
return -E2BIG;
}
- snprintf(bus->class_dev.class_id, BUS_ID_SIZE, "usb%d", busnum);
- bus->class_dev.dev = bus->controller;
- retval = class_device_add(&bus->class_dev);
- if (retval) {
+ bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
+ bus->controller, "usb_host%d", busnum);
+ if (IS_ERR(bus->class_dev)) {
clear_bit(busnum, busmap.busmap);
- up(&usb_bus_list_lock);
- return retval;
+ mutex_unlock(&usb_bus_list_lock);
+ return PTR_ERR(bus->class_dev);
}
+ class_set_devdata(bus->class_dev, bus);
+
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
- usbfs_add_bus (bus);
- usbmon_notify_bus_add (bus);
+ usb_notify_add_bus(bus);
dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
return 0;
* controller code, as well as having it call this when cleaning
* itself up
*/
- down (&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
list_del (&bus->bus_list);
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
- usbmon_notify_bus_remove (bus);
- usbfs_remove_bus (bus);
+ usb_notify_remove_bus(bus);
clear_bit (bus->busnum, busmap.busmap);
- class_device_del(&bus->class_dev);
+ class_device_unregister(bus->class_dev);
}
/**
- * usb_hcd_register_root_hub - called by HCD to register its root hub
- * @usb_dev: the usb root hub device to be registered.
+ * register_root_hub - called by usb_add_hcd() to register a root hub
* @hcd: host controller for this root hub
*
- * The USB host controller calls this function to register the root hub
- * properly with the USB subsystem. It sets up the device properly in
- * the device tree and stores the root_hub pointer in the bus structure,
- * then calls usb_new_device() to register the usb device. It also
- * assigns the root hub's USB address (always 1).
+ * This function registers the root hub with the USB subsystem. It sets up
+ * the device properly in the device tree and then calls usb_new_device()
+ * to register the usb device. It also assigns the root hub's USB address
+ * (always 1).
*/
-int usb_hcd_register_root_hub (struct usb_device *usb_dev, struct usb_hcd *hcd)
+static int register_root_hub(struct usb_hcd *hcd)
{
struct device *parent_dev = hcd->self.controller;
+ struct usb_device *usb_dev = hcd->self.root_hub;
const int devnum = 1;
int retval;
- /* hcd->driver->start() reported can_wakeup, probably with
- * assistance from board's boot firmware.
- * NOTE: normal devices won't enable wakeup by default.
- */
- if (hcd->can_wakeup)
- dev_dbg (parent_dev, "supports USB remote wakeup\n");
- hcd->remote_wakeup = hcd->can_wakeup;
-
usb_dev->devnum = devnum;
usb_dev->bus->devnum_next = devnum + 1;
memset (&usb_dev->bus->devmap.devicemap, 0,
set_bit (devnum, usb_dev->bus->devmap.devicemap);
usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
- down (&usb_bus_list_lock);
- usb_dev->bus->root_hub = usb_dev;
+ mutex_lock(&usb_bus_list_lock);
usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
if (retval != sizeof usb_dev->descriptor) {
- usb_dev->bus->root_hub = NULL;
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
usb_dev->dev.bus_id, retval);
return (retval < 0) ? retval : -EMSGSIZE;
}
- usb_lock_device (usb_dev);
retval = usb_new_device (usb_dev);
- usb_unlock_device (usb_dev);
if (retval) {
- usb_dev->bus->root_hub = NULL;
dev_err (parent_dev, "can't register root hub for %s, %d\n",
usb_dev->dev.bus_id, retval);
}
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
if (retval == 0) {
spin_lock_irq (&hcd_root_hub_lock);
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_register_root_hub);
+
+void usb_enable_root_hub_irq (struct usb_bus *bus)
+{
+ struct usb_hcd *hcd;
+
+ hcd = container_of (bus, struct usb_hcd, self);
+ if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
+ hcd->driver->hub_irq_enable (hcd);
+}
/*-------------------------------------------------------------------------*/
case USB_SPEED_HIGH: /* ISOC or INTR */
// FIXME adjust for input vs output
if (isoc)
- tmp = HS_USECS (bytecount);
+ tmp = HS_NSECS_ISO (bytecount);
else
- tmp = HS_USECS_ISO (bytecount);
+ tmp = HS_NSECS (bytecount);
return tmp;
default:
pr_debug ("%s: bogus device speed!\n", usbcore_name);
spin_lock_irqsave (&hcd_data_lock, flags);
list_del_init (&urb->urb_list);
spin_unlock_irqrestore (&hcd_data_lock, flags);
- usb_put_dev (urb->dev);
}
* expects usb_submit_urb() to have sanity checked and conditioned all
* inputs in the urb
*/
-static int hcd_submit_urb (struct urb *urb, int mem_flags)
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
{
int status;
- struct usb_hcd *hcd = urb->dev->bus->hcpriv;
+ struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
struct usb_host_endpoint *ep;
unsigned long flags;
else switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
- usb_get_dev (urb->dev);
+doit:
list_add_tail (&urb->urb_list, &ep->urb_list);
status = 0;
break;
+ case HC_STATE_SUSPENDED:
+ /* HC upstream links (register access, wakeup signaling) can work
+ * even when the downstream links (and DMA etc) are quiesced; let
+ * usbcore talk to the root hub.
+ */
+ if (hcd->self.controller->power.power_state.event == PM_EVENT_ON
+ && urb->dev->parent == NULL)
+ goto doit;
+ /* FALL THROUGH */
default:
status = -ESHUTDOWN;
break;
/* lower level hcd code should use *_dma exclusively,
* unless it uses pio or talks to another transport.
*/
- if (hcd->self.controller->dma_mask) {
+ if (hcd->self.uses_dma) {
if (usb_pipecontrol (urb->pipe)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
urb->setup_dma = dma_map_single (
/*-------------------------------------------------------------------------*/
/* called in any context */
-static int hcd_get_frame_number (struct usb_device *udev)
+int usb_hcd_get_frame_number (struct usb_device *udev)
{
- struct usb_hcd *hcd = (struct usb_hcd *)udev->bus->hcpriv;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
if (!HC_IS_RUNNING (hcd->state))
return -ESHUTDOWN;
return hcd->driver->get_frame_number (hcd);
* caller guarantees urb won't be recycled till both unlink()
* and the urb's completion function return
*/
-static int hcd_unlink_urb (struct urb *urb, int status)
+int usb_hcd_unlink_urb (struct urb *urb, int status)
{
struct usb_host_endpoint *ep;
struct usb_hcd *hcd = NULL;
spin_lock (&hcd_data_lock);
sys = &urb->dev->dev;
- hcd = urb->dev->bus->hcpriv;
+ hcd = bus_to_hcd(urb->dev->bus);
if (hcd == NULL) {
retval = -ENODEV;
goto done;
}
- /* running ~= hc unlink handshake works (irq, timer, etc)
- * halted ~= no unlink handshake is needed
- * suspended, resuming == should never happen
- */
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT);
-
/* insist the urb is still queued */
list_for_each(tmp, &ep->urb_list) {
if (tmp == &urb->urb_list)
* finish unlinking the initial failed usb_set_address()
* or device descriptor fetch.
*/
- if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) {
+ if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags)
+ && hcd->self.root_hub != urb->dev) {
dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
"Controller is probably using the wrong IRQ."
"\n");
- hcd->saw_irq = 1;
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
}
urb->status = status;
/*-------------------------------------------------------------------------*/
/* disables the endpoint: cancels any pending urbs, then synchronizes with
- * the hcd to make sure all endpoint state is gone from hardware. use for
+ * the hcd to make sure all endpoint state is gone from hardware, and then
+ * waits until the endpoint's queue is completely drained. use for
* set_configuration, set_interface, driver removal, physical disconnect.
*
* example: a qh stored in ep->hcpriv, holding state related to endpoint
* type, maxpacket size, toggle, halt status, and scheduling.
*/
-static void
-hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep)
+void usb_hcd_endpoint_disable (struct usb_device *udev,
+ struct usb_host_endpoint *ep)
{
struct usb_hcd *hcd;
struct urb *urb;
- hcd = udev->bus->hcpriv;
+ hcd = bus_to_hcd(udev->bus);
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT);
+ WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT &&
+ udev->state != USB_STATE_NOTATTACHED);
local_irq_disable ();
- /* FIXME move most of this into message.c as part of its
- * endpoint disable logic
- */
-
/* ep is already gone from udev->ep_{in,out}[]; no more submits */
rescan:
spin_lock (&hcd_data_lock);
list_for_each_entry (urb, &ep->urb_list, urb_list) {
int tmp;
- /* another cpu may be in hcd, spinning on hcd_data_lock
- * to giveback() this urb. the races here should be
- * small, but a full fix needs a new "can't submit"
- * urb state.
- * FIXME urb->reject should allow that...
- */
+ /* the urb may already have been unlinked */
if (urb->status != -EINPROGRESS)
continue;
usb_get_urb (urb);
might_sleep ();
if (hcd->driver->endpoint_disable)
hcd->driver->endpoint_disable (hcd, ep);
+
+ /* Wait until the endpoint queue is completely empty. Most HCDs
+ * will have done this already in their endpoint_disable method,
+ * but some might not. And there could be root-hub control URBs
+ * still pending since they aren't affected by the HCDs'
+ * endpoint_disable methods.
+ */
+ while (!list_empty (&ep->urb_list)) {
+ spin_lock_irq (&hcd_data_lock);
+
+ /* The list may have changed while we acquired the spinlock */
+ urb = NULL;
+ if (!list_empty (&ep->urb_list)) {
+ urb = list_entry (ep->urb_list.prev, struct urb,
+ urb_list);
+ usb_get_urb (urb);
+ }
+ spin_unlock_irq (&hcd_data_lock);
+
+ if (urb) {
+ usb_kill_urb (urb);
+ usb_put_urb (urb);
+ }
+ }
}
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_USB_SUSPEND
+#ifdef CONFIG_PM
-static int hcd_hub_suspend (struct usb_bus *bus)
+int hcd_bus_suspend (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_suspend)
- return hcd->driver->hub_suspend (hcd);
- return 0;
+ if (!hcd->driver->bus_suspend)
+ return -ENOENT;
+ hcd->state = HC_STATE_QUIESCING;
+ status = hcd->driver->bus_suspend (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_SUSPENDED;
+ else
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "suspend", status);
+ return status;
}
-static int hcd_hub_resume (struct usb_bus *bus)
+int hcd_bus_resume (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_resume)
- return hcd->driver->hub_resume (hcd);
- return 0;
+ if (!hcd->driver->bus_resume)
+ return -ENOENT;
+ if (hcd->state == HC_STATE_RUNNING)
+ return 0;
+ hcd->state = HC_STATE_RESUMING;
+ status = hcd->driver->bus_resume (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_RUNNING;
+ else {
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "resume", status);
+ usb_hc_died(hcd);
+ }
+ return status;
}
/**
* The USB host controller calls this function when its root hub is
* suspended (with the remote wakeup feature enabled) and a remote
* wakeup request is received. It queues a request for khubd to
- * resume the root hub.
+ * resume the root hub (that is, manage its downstream ports again).
*/
void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
{
usb_resume_root_hub (hcd->self.root_hub);
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
+EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
-#else
-void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
-{
-}
#endif
-EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
/*-------------------------------------------------------------------------*/
/*-------------------------------------------------------------------------*/
-/*
- * usb_hcd_operations - adapts usb_bus framework to HCD framework (bus glue)
- */
-static struct usb_operations usb_hcd_operations = {
- .get_frame_number = hcd_get_frame_number,
- .submit_urb = hcd_submit_urb,
- .unlink_urb = hcd_unlink_urb,
- .buffer_alloc = hcd_buffer_alloc,
- .buffer_free = hcd_buffer_free,
- .disable = hcd_endpoint_disable,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = hcd_hub_suspend,
- .hub_resume = hcd_hub_resume,
-#endif
-};
-
-/*-------------------------------------------------------------------------*/
-
/**
* usb_hcd_giveback_urb - return URB from HCD to device driver
* @hcd: host controller returning the URB
* @urb: urb being returned to the USB device driver.
- * @regs: pt_regs, passed down to the URB completion handler
* Context: in_interrupt()
*
* This hands the URB from HCD to its USB device driver, using its
* the device driver won't cause problems if it frees, modifies,
* or resubmits this URB.
*/
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
+void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
{
int at_root_hub;
at_root_hub = (urb->dev == hcd->self.root_hub);
urb_unlink (urb);
- /* lower level hcd code should use *_dma exclusively */
- if (hcd->self.controller->dma_mask && !at_root_hub) {
+ /* lower level hcd code should use *_dma exclusively if the
+ * host controller does DMA */
+ if (hcd->self.uses_dma && !at_root_hub) {
if (usb_pipecontrol (urb->pipe)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
dma_unmap_single (hcd->self.controller, urb->setup_dma,
usbmon_urb_complete (&hcd->self, urb);
/* pass ownership to the completion handler */
- urb->complete (urb, regs);
+ urb->complete (urb);
atomic_dec (&urb->use_count);
if (unlikely (urb->reject))
wake_up (&usb_kill_urb_queue);
* If the controller isn't HALTed, calls the driver's irq handler.
* Checks whether the controller is now dead.
*/
-irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r)
+irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
int start = hcd->state;
- if (start == HC_STATE_HALT)
+ if (unlikely(start == HC_STATE_HALT ||
+ !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
return IRQ_NONE;
- if (hcd->driver->irq (hcd, r) == IRQ_NONE)
+ if (hcd->driver->irq (hcd) == IRQ_NONE)
return IRQ_NONE;
- hcd->saw_irq = 1;
- if (hcd->state != start && hcd->state == HC_STATE_HALT)
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ if (unlikely(hcd->state == HC_STATE_HALT))
usb_hc_died (hcd);
return IRQ_HANDLED;
}
spin_lock_irqsave (&hcd_root_hub_lock, flags);
if (hcd->rh_registered) {
+ hcd->poll_rh = 0;
/* make khubd clean up old urbs and devices */
usb_set_device_state (hcd->self.root_hub,
/*-------------------------------------------------------------------------*/
-static void hcd_release (struct usb_bus *bus)
-{
- struct usb_hcd *hcd;
-
- hcd = container_of(bus, struct usb_hcd, self);
- kfree(hcd);
-}
-
/**
* usb_create_hcd - create and initialize an HCD structure
* @driver: HC driver that will use this hcd
{
struct usb_hcd *hcd;
- hcd = kcalloc(1, sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
+ hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
if (!hcd) {
dev_dbg (dev, "hcd alloc failed\n");
return NULL;
}
dev_set_drvdata(dev, hcd);
+ kref_init(&hcd->kref);
usb_bus_init(&hcd->self);
- hcd->self.op = &usb_hcd_operations;
- hcd->self.hcpriv = hcd;
- hcd->self.release = &hcd_release;
hcd->self.controller = dev;
hcd->self.bus_name = bus_name;
+ hcd->self.uses_dma = (dev->dma_mask != NULL);
init_timer(&hcd->rh_timer);
+ hcd->rh_timer.function = rh_timer_func;
+ hcd->rh_timer.data = (unsigned long) hcd;
hcd->driver = driver;
hcd->product_desc = (driver->product_desc) ? driver->product_desc :
}
EXPORT_SYMBOL (usb_create_hcd);
+static void hcd_release (struct kref *kref)
+{
+ struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
+
+ kfree(hcd);
+}
+
+struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
+{
+ if (hcd)
+ kref_get (&hcd->kref);
+ return hcd;
+}
+EXPORT_SYMBOL (usb_get_hcd);
+
void usb_put_hcd (struct usb_hcd *hcd)
{
- dev_set_drvdata(hcd->self.controller, NULL);
- usb_bus_put(&hcd->self);
+ if (hcd)
+ kref_put (&hcd->kref, hcd_release);
}
EXPORT_SYMBOL (usb_put_hcd);
int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags)
{
- int retval;
+ int retval;
+ struct usb_device *rhdev;
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
- /* till now HC has been in an indeterminate state ... */
- if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
- dev_err(hcd->self.controller, "can't reset\n");
- return retval;
- }
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ /* HC is in reset state, but accessible. Now do the one-time init,
+ * bottom up so that hcds can customize the root hubs before khubd
+ * starts talking to them. (Note, bus id is assigned early too.)
+ */
if ((retval = hcd_buffer_create(hcd)) != 0) {
dev_dbg(hcd->self.controller, "pool alloc failed\n");
return retval;
}
if ((retval = usb_register_bus(&hcd->self)) < 0)
- goto err1;
+ goto err_register_bus;
- if (hcd->driver->irq) {
- char buf[8], *bufp = buf;
+ if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+ dev_err(hcd->self.controller, "unable to allocate root hub\n");
+ retval = -ENOMEM;
+ goto err_allocate_root_hub;
+ }
+ rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
+ USB_SPEED_FULL;
+ hcd->self.root_hub = rhdev;
-#ifdef __sparc__
- bufp = __irq_itoa(irqnum);
-#else
- sprintf(buf, "%d", irqnum);
-#endif
+ /* wakeup flag init defaults to "everything works" for root hubs,
+ * but drivers can override it in reset() if needed, along with
+ * recording the overall controller's system wakeup capability.
+ */
+ device_init_wakeup(&rhdev->dev, 1);
+
+ /* "reset" is misnamed; its role is now one-time init. the controller
+ * should already have been reset (and boot firmware kicked off etc).
+ */
+ if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
+ dev_err(hcd->self.controller, "can't setup\n");
+ goto err_hcd_driver_setup;
+ }
+
+ /* NOTE: root hub and controller capabilities may not be the same */
+ if (device_can_wakeup(hcd->self.controller)
+ && device_can_wakeup(&hcd->self.root_hub->dev))
+ dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
+ /* enable irqs just before we start the controller */
+ if (hcd->driver->irq) {
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
hcd->irq_descr, hcd)) != 0) {
dev_err(hcd->self.controller,
- "request interrupt %s failed\n", bufp);
- goto err2;
+ "request interrupt %d failed\n", irqnum);
+ goto err_request_irq;
}
hcd->irq = irqnum;
- dev_info(hcd->self.controller, "irq %s, %s 0x%08llx\n", bufp,
+ dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
(hcd->driver->flags & HCD_MEMORY) ?
"io mem" : "io base",
(unsigned long long)hcd->rsrc_start);
if ((retval = hcd->driver->start(hcd)) < 0) {
dev_err(hcd->self.controller, "startup error %d\n", retval);
- goto err3;
+ goto err_hcd_driver_start;
}
+ /* starting here, usbcore will pay attention to this root hub */
+ rhdev->bus_mA = min(500u, hcd->power_budget);
+ if ((retval = register_root_hub(hcd)) != 0)
+ goto err_register_root_hub;
+
+ if (hcd->uses_new_polling && hcd->poll_rh)
+ usb_hcd_poll_rh_status(hcd);
return retval;
- err3:
+err_register_root_hub:
+ hcd->driver->stop(hcd);
+err_hcd_driver_start:
if (hcd->irq >= 0)
free_irq(irqnum, hcd);
- err2:
+err_request_irq:
+err_hcd_driver_setup:
+ hcd->self.root_hub = NULL;
+ usb_put_dev(rhdev);
+err_allocate_root_hub:
usb_deregister_bus(&hcd->self);
- err1:
+err_register_bus:
hcd_buffer_destroy(hcd);
return retval;
}
spin_lock_irq (&hcd_root_hub_lock);
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);
+
+ mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
+ mutex_unlock(&usb_bus_list_lock);
+
+ hcd->poll_rh = 0;
+ del_timer_sync(&hcd->rh_timer);
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
}
EXPORT_SYMBOL (usb_remove_hcd);
+void
+usb_hcd_platform_shutdown(struct platform_device* dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL (usb_hcd_platform_shutdown);
+
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+#if defined(CONFIG_USB_MON)
struct usb_mon_operations *mon_ops;
git://git.onelab.eu / linux-2.6.git / blobdiff