/*-------------------------------------------------------------------------*/
-struct usb_hcd { /* usb_bus.hcpriv points to this */
+struct usb_hcd {
/*
* housekeeping
*/
struct usb_bus self; /* hcd is-a bus */
+ struct kref kref; /* reference counter */
const char *product_desc; /* product/vendor string */
+ char irq_descr[24]; /* driver + bus # */
- struct timer_list rh_timer; /* drives root hub */
+ struct timer_list rh_timer; /* drives root-hub polling */
+ struct urb *status_urb; /* the current status urb */
/*
* hardware info/state
*/
const struct hc_driver *driver; /* hw-specific hooks */
- unsigned saw_irq : 1;
- unsigned can_wakeup:1; /* hw supports wakeup? */
- unsigned remote_wakeup:1;/* sw should use wakeup? */
+
+ /* Flags that need to be manipulated atomically */
+ unsigned long flags;
+#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
+#define HCD_FLAG_SAW_IRQ 0x00000002
+
+ unsigned rh_registered:1;/* is root hub registered? */
+
+ /* The next flag is a stopgap, to be removed when all the HCDs
+ * support the new root-hub polling mechanism. */
+ unsigned uses_new_polling:1;
+ unsigned poll_rh:1; /* poll for rh status? */
+ unsigned poll_pending:1; /* status has changed? */
+ unsigned wireless:1; /* Wireless USB HCD */
+
int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
-
-#ifdef CONFIG_PCI
- int region; /* pci region for regs */
-#endif
+ u64 rsrc_start; /* memory/io resource start */
+ u64 rsrc_len; /* memory/io resource length */
+ unsigned power_budget; /* in mA, 0 = no limit */
#define HCD_BUFFER_POOLS 4
struct dma_pool *pool [HCD_BUFFER_POOLS];
# define __SUSPEND 0x04
# define __TRANSIENT 0x80
-# define USB_STATE_HALT 0
-# define USB_STATE_RUNNING (__ACTIVE)
-# define USB_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
-# define USB_STATE_RESUMING (__SUSPEND|__TRANSIENT)
-# define HCD_STATE_SUSPENDED (__SUSPEND)
+# define HC_STATE_HALT 0
+# define HC_STATE_RUNNING (__ACTIVE)
+# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
+# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
+# define HC_STATE_SUSPENDED (__SUSPEND)
-#define HCD_IS_RUNNING(state) ((state) & __ACTIVE)
-#define HCD_IS_SUSPENDED(state) ((state) & __SUSPEND)
+#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
+#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
/* more shared queuing code would be good; it should support
* smarter scheduling, handle transaction translators, etc;
return &hcd->self;
}
-
-// urb.hcpriv is really hardware-specific
+static inline struct usb_hcd *bus_to_hcd (struct usb_bus *bus)
+{
+ return container_of(bus, struct usb_hcd, self);
+}
struct hcd_timeout { /* timeouts we allocate */
struct list_head timeout_list;
/*-------------------------------------------------------------------------*/
-/*
- * FIXME usb_operations should vanish or become hc_driver,
- * when usb_bus and usb_hcd become the same thing.
- */
-
-struct usb_operations {
- int (*get_frame_number) (struct usb_device *usb_dev);
- int (*submit_urb) (struct urb *urb, int mem_flags);
- int (*unlink_urb) (struct urb *urb, int status);
-
- /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
- void *(*buffer_alloc)(struct usb_bus *bus, size_t size,
- int mem_flags,
- dma_addr_t *dma);
- void (*buffer_free)(struct usb_bus *bus, size_t size,
- void *addr, dma_addr_t dma);
-
- void (*disable)(struct usb_device *udev,
- struct usb_host_endpoint *ep);
-
- /* global suspend/resume of bus */
- int (*hub_suspend)(struct usb_bus *);
- int (*hub_resume)(struct usb_bus *);
-};
-
-/* each driver provides one of these, and hardware init support */
-
-struct pt_regs;
struct hc_driver {
const char *description; /* "ehci-hcd" etc */
size_t hcd_priv_size; /* size of private data */
/* irq handler */
- irqreturn_t (*irq) (struct usb_hcd *hcd, struct pt_regs *regs);
+ irqreturn_t (*irq) (struct usb_hcd *hcd);
int flags;
#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
int (*start) (struct usb_hcd *hcd);
/* NOTE: these suspend/resume calls relate to the HC as
- * a whole, not just the root hub; they're for bus glue.
+ * a whole, not just the root hub; they're for PCI bus glue.
*/
- /* called after all devices were suspended */
- int (*suspend) (struct usb_hcd *hcd, u32 state);
+ /* called after suspending the hub, before entering D3 etc */
+ int (*suspend) (struct usb_hcd *hcd, pm_message_t message);
- /* called before any devices get resumed */
+ /* called after entering D0 (etc), before resuming the hub */
int (*resume) (struct usb_hcd *hcd);
/* cleanly make HCD stop writing memory and doing I/O */
void (*stop) (struct usb_hcd *hcd);
+ /* shutdown HCD */
+ void (*shutdown) (struct usb_hcd *hcd);
+
/* return current frame number */
int (*get_frame_number) (struct usb_hcd *hcd);
int (*urb_enqueue) (struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
struct urb *urb,
- int mem_flags);
+ gfp_t mem_flags);
int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
/* hw synch, freeing endpoint resources that urb_dequeue can't */
int (*hub_control) (struct usb_hcd *hcd,
u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
- int (*hub_suspend)(struct usb_hcd *);
- int (*hub_resume)(struct usb_hcd *);
+ int (*bus_suspend)(struct usb_hcd *);
+ int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+ void (*hub_irq_enable)(struct usb_hcd *);
+ /* Needed only if port-change IRQs are level-triggered */
};
-extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs);
-extern void usb_bus_init (struct usb_bus *bus);
+extern int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags);
+extern int usb_hcd_unlink_urb (struct urb *urb, int status);
+extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb);
+extern void usb_hcd_endpoint_disable (struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern int usb_hcd_get_frame_number (struct usb_device *udev);
-extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver);
+extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
+ struct device *dev, char *bus_name);
+extern struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd);
extern void usb_put_hcd (struct usb_hcd *hcd);
+extern int usb_add_hcd(struct usb_hcd *hcd,
+ unsigned int irqnum, unsigned long irqflags);
+extern void usb_remove_hcd(struct usb_hcd *hcd);
+struct platform_device;
+extern void usb_hcd_platform_shutdown(struct platform_device* dev);
#ifdef CONFIG_PCI
struct pci_dev;
extern void usb_hcd_pci_remove (struct pci_dev *dev);
#ifdef CONFIG_PM
-extern int usb_hcd_pci_suspend (struct pci_dev *dev, u32 state);
+extern int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t state);
extern int usb_hcd_pci_resume (struct pci_dev *dev);
#endif /* CONFIG_PM */
+extern void usb_hcd_pci_shutdown (struct pci_dev *dev);
+
#endif /* CONFIG_PCI */
/* pci-ish (pdev null is ok) buffer alloc/mapping support */
void hcd_buffer_destroy (struct usb_hcd *hcd);
void *hcd_buffer_alloc (struct usb_bus *bus, size_t size,
- int mem_flags, dma_addr_t *dma);
+ gfp_t mem_flags, dma_addr_t *dma);
void hcd_buffer_free (struct usb_bus *bus, size_t size,
void *addr, dma_addr_t dma);
/* generic bus glue, needed for host controllers that don't use PCI */
-extern irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs *r);
+extern irqreturn_t usb_hcd_irq (int irq, void *__hcd);
+
extern void usb_hc_died (struct usb_hcd *hcd);
+extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
/* -------------------------------------------------------------------------- */
extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
/*
- * Ceiling microseconds (typical) for that many bytes at high speed
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
* ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
* to preallocate bandwidth)
*/
#define USB2_HOST_DELAY 5 /* nsec, guess */
-#define HS_USECS(bytes) NS_TO_US ( ((55 * 8 * 2083)/1000) \
- + ((2083UL * (3167 + BitTime (bytes)))/1000) \
+#define HS_NSECS(bytes) ( ((55 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ USB2_HOST_DELAY)
-#define HS_USECS_ISO(bytes) NS_TO_US ( ((38 * 8 * 2083)/1000) \
- + ((2083UL * (3167 + BitTime (bytes)))/1000) \
+#define HS_NSECS_ISO(bytes) ( ((38 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ USB2_HOST_DELAY)
+#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
extern long usb_calc_bus_time (int speed, int is_input,
int isoc, int bytecount);
/*-------------------------------------------------------------------------*/
-extern struct usb_bus *usb_alloc_bus (struct usb_operations *);
-
-extern int usb_register_bus (struct usb_bus *);
-extern void usb_deregister_bus (struct usb_bus *);
-
-extern int usb_register_root_hub (struct usb_device *usb_dev,
- struct device *parent_dev);
-
-static inline int hcd_register_root (struct usb_device *usb_dev,
- struct usb_hcd *hcd)
-{
- /* hcd->driver->start() reported can_wakeup, probably with
- * assistance from board's boot firmware.
- * NOTE: normal devices won't enable wakeup by default.
- */
- if (hcd->can_wakeup)
- dev_dbg (hcd->self.controller, "supports USB remote wakeup\n");
- hcd->remote_wakeup = hcd->can_wakeup;
-
- return usb_register_root_hub (usb_dev, hcd->self.controller);
-}
-
extern void usb_set_device_state(struct usb_device *udev,
enum usb_device_state new_state);
/* exported only within usbcore */
extern struct list_head usb_bus_list;
-extern struct semaphore usb_bus_list_lock;
+extern struct mutex usb_bus_list_lock;
extern wait_queue_head_t usb_kill_urb_queue;
-extern struct usb_bus *usb_bus_get (struct usb_bus *bus);
-extern void usb_bus_put (struct usb_bus *bus);
+extern void usb_enable_root_hub_irq (struct usb_bus *bus);
extern int usb_find_interface_driver (struct usb_device *dev,
struct usb_interface *interface);
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
+#ifdef CONFIG_PM
+extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
+extern void usb_root_hub_lost_power (struct usb_device *rhdev);
+extern int hcd_bus_suspend (struct usb_bus *bus);
+extern int hcd_bus_resume (struct usb_bus *bus);
+#else
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+
+static inline int hcd_bus_suspend(struct usb_bus *bus)
+{
+ return 0;
+}
+
+static inline int hcd_bus_resume (struct usb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_PM */
+
/*
* USB device fs stuff
*/
* these are expected to be called from the USB core/hub thread
* with the kernel lock held
*/
-extern void usbfs_add_bus(struct usb_bus *bus);
-extern void usbfs_remove_bus(struct usb_bus *bus);
-extern void usbfs_add_device(struct usb_device *dev);
-extern void usbfs_remove_device(struct usb_device *dev);
extern void usbfs_update_special (void);
-
extern int usbfs_init(void);
extern void usbfs_cleanup(void);
#else /* CONFIG_USB_DEVICEFS */
-static inline void usbfs_add_bus(struct usb_bus *bus) {}
-static inline void usbfs_remove_bus(struct usb_bus *bus) {}
-static inline void usbfs_add_device(struct usb_device *dev) {}
-static inline void usbfs_remove_device(struct usb_device *dev) {}
static inline void usbfs_update_special (void) {}
-
static inline int usbfs_init(void) { return 0; }
static inline void usbfs_cleanup(void) { }
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_USB_MON)
+
+struct usb_mon_operations {
+ void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
+ void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
+ void (*urb_complete)(struct usb_bus *bus, struct urb *urb);
+ /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
+};
+
+extern struct usb_mon_operations *mon_ops;
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit)(bus, urb);
+}
+
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit_error)(bus, urb, error);
+}
+
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_complete)(bus, urb);
+}
+
+int usb_mon_register(struct usb_mon_operations *ops);
+void usb_mon_deregister(void);
+
+#else
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
+
+#endif /* CONFIG_USB_MON */
+
+/*-------------------------------------------------------------------------*/
+
/* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
// bleech -- resurfaced in 2.4.11 or 2.4.12
#define bitmap DeviceRemovable
git://git.onelab.eu / linux-2.6.git / blobdiff