*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
- #define DEBUG
-#else
- #undef DEBUG
-#endif
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/ioctl.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
-#include <linux/suspend.h>
+#include <linux/kthread.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
#include "hcd.h"
#include "hub.h"
-/* Protect all struct usb_device state members */
-static spinlock_t device_state_lock = SPIN_LOCK_UNLOCKED;
-
-/* Wakes up khubd */
-static spinlock_t hub_event_lock = SPIN_LOCK_UNLOCKED;
+/* Protect struct usb_device->state and ->children members
+ * Note: Both are also protected by ->dev.sem, except that ->state can
+ * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
+static DEFINE_SPINLOCK(device_state_lock);
+/* khubd's worklist and its lock */
+static DEFINE_SPINLOCK(hub_event_lock);
static LIST_HEAD(hub_event_list); /* List of hubs needing servicing */
+/* Wakes up khubd */
static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);
-static pid_t khubd_pid = 0; /* PID of khubd */
-static DECLARE_COMPLETION(khubd_exited);
+
+static struct task_struct *khubd_task;
/* cycle leds on hubs that aren't blinking for attention */
static int blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
+/*
+ * As of 2.6.10 we introduce a new USB device initialization scheme which
+ * closely resembles the way Windows works. Hopefully it will be compatible
+ * with a wider range of devices than the old scheme. However some previously
+ * working devices may start giving rise to "device not accepting address"
+ * errors; if that happens the user can try the old scheme by adjusting the
+ * following module parameters.
+ *
+ * For maximum flexibility there are two boolean parameters to control the
+ * hub driver's behavior. On the first initialization attempt, if the
+ * "old_scheme_first" parameter is set then the old scheme will be used,
+ * otherwise the new scheme is used. If that fails and "use_both_schemes"
+ * is set, then the driver will make another attempt, using the other scheme.
+ */
+static int old_scheme_first = 0;
+module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(old_scheme_first,
+ "start with the old device initialization scheme");
+
+static int use_both_schemes = 1;
+module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(use_both_schemes,
+ "try the other device initialization scheme if the "
+ "first one fails");
+
#ifdef DEBUG
static inline char *portspeed (int portstatus)
}
#endif
-/* for dev_info, dev_dbg, etc */
-static inline struct device *hubdev (struct usb_device *hdev)
+/* Note that hdev or one of its children must be locked! */
+static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
{
- return &hdev->actconfig->interface[0]->dev;
+ return usb_get_intfdata(hdev->actconfig->interface[0]);
}
/* USB 2.0 spec Section 11.24.4.5 */
static int get_hub_descriptor(struct usb_device *hdev, void *data, int size)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
- USB_DT_HUB << 8, 0, data, size, HZ * USB_CTRL_GET_TIMEOUT);
+ int i, ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
+ USB_DT_HUB << 8, 0, data, size,
+ USB_CTRL_GET_TIMEOUT);
+ if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
+ return ret;
+ }
+ return -EINVAL;
}
/*
static int clear_hub_feature(struct usb_device *hdev, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, HZ);
+ USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000);
}
/*
* USB 2.0 spec Section 11.24.2.2
*/
-static int clear_port_feature(struct usb_device *hdev, int port, int feature)
+static int clear_port_feature(struct usb_device *hdev, int port1, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port, NULL, 0, HZ);
+ USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
+ NULL, 0, 1000);
}
/*
* USB 2.0 spec Section 11.24.2.13
*/
-static int set_port_feature(struct usb_device *hdev, int port, int feature)
+static int set_port_feature(struct usb_device *hdev, int port1, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port, NULL, 0, HZ);
+ USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
+ NULL, 0, 1000);
}
/*
* for info about using port indicators
*/
static void set_port_led(
- struct usb_device *hdev,
- int port,
+ struct usb_hub *hub,
+ int port1,
int selector
)
{
- int status = set_port_feature(hdev, (selector << 8) | port,
+ int status = set_port_feature(hub->hdev, (selector << 8) | port1,
USB_PORT_FEAT_INDICATOR);
if (status < 0)
- dev_dbg (hubdev (hdev),
+ dev_dbg (hub->intfdev,
"port %d indicator %s status %d\n",
- port,
+ port1,
({ char *s; switch (selector) {
case HUB_LED_AMBER: s = "amber"; break;
case HUB_LED_GREEN: s = "green"; break;
unsigned changed = 0;
int cursor = -1;
- if (hdev->state != USB_STATE_CONFIGURED)
+ if (hdev->state != USB_STATE_CONFIGURED || hub->quiescing)
return;
for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
}
if (selector != HUB_LED_AUTO)
changed = 1;
- set_port_led(hdev, i + 1, selector);
+ set_port_led(hub, i + 1, selector);
hub->indicator[i] = mode;
}
if (!changed && blinkenlights) {
cursor++;
cursor %= hub->descriptor->bNbrPorts;
- set_port_led(hdev, cursor + 1, HUB_LED_GREEN);
+ set_port_led(hub, cursor + 1, HUB_LED_GREEN);
hub->indicator[cursor] = INDICATOR_CYCLE;
changed++;
}
schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
}
+/* use a short timeout for hub/port status fetches */
+#define USB_STS_TIMEOUT 1000
+#define USB_STS_RETRIES 5
+
/*
* USB 2.0 spec Section 11.24.2.6
*/
static int get_hub_status(struct usb_device *hdev,
struct usb_hub_status *data)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
- data, sizeof(*data), HZ * USB_CTRL_GET_TIMEOUT);
+ int i, status = -ETIMEDOUT;
+
+ for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
+ data, sizeof(*data), USB_STS_TIMEOUT);
+ }
+ return status;
}
/*
* USB 2.0 spec Section 11.24.2.7
*/
-static int get_port_status(struct usb_device *hdev, int port,
+static int get_port_status(struct usb_device *hdev, int port1,
struct usb_port_status *data)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
- data, sizeof(*data), HZ * USB_CTRL_GET_TIMEOUT);
+ int i, status = -ETIMEDOUT;
+
+ for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
+ data, sizeof(*data), USB_STS_TIMEOUT);
+ }
+ return status;
+}
+
+static void kick_khubd(struct usb_hub *hub)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hub_event_lock, flags);
+ if (list_empty(&hub->event_list)) {
+ list_add_tail(&hub->event_list, &hub_event_list);
+ wake_up(&khubd_wait);
+ }
+ spin_unlock_irqrestore(&hub_event_lock, flags);
+}
+
+void usb_kick_khubd(struct usb_device *hdev)
+{
+ kick_khubd(hdev_to_hub(hdev));
}
+
/* completion function, fires on port status changes and various faults */
static void hub_irq(struct urb *urb, struct pt_regs *regs)
{
default: /* presumably an error */
/* Cause a hub reset after 10 consecutive errors */
- dev_dbg (&hub->intf->dev, "transfer --> %d\n", urb->status);
+ dev_dbg (hub->intfdev, "transfer --> %d\n", urb->status);
if ((++hub->nerrors < 10) || hub->error)
goto resubmit;
hub->error = urb->status;
hub->nerrors = 0;
/* Something happened, let khubd figure it out */
- spin_lock(&hub_event_lock);
- if (list_empty(&hub->event_list)) {
- list_add_tail(&hub->event_list, &hub_event_list);
- wake_up(&khubd_wait);
- }
- spin_unlock(&hub_event_lock);
+ kick_khubd(hub);
resubmit:
+ if (hub->quiescing)
+ return;
+
if ((status = usb_submit_urb (hub->urb, GFP_ATOMIC)) != 0
&& status != -ENODEV && status != -EPERM)
- dev_err (&hub->intf->dev, "resubmit --> %d\n", status);
+ dev_err (hub->intfdev, "resubmit --> %d\n", status);
}
/* USB 2.0 spec Section 11.24.2.3 */
{
return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
- tt, NULL, 0, HZ);
+ tt, NULL, 0, 1000);
}
/*
dev_err (&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
- kfree (clear);
+ kfree(clear);
}
spin_unlock_irqrestore (&hub->tt.lock, flags);
}
/**
* usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @dev: the device whose split transaction failed
+ * @udev: the device whose split transaction failed
* @pipe: identifies the endpoint of the failed transaction
*
* High speed HCDs use this to tell the hub driver that some split control or
* since each TT has "at least two" buffers that can need it (and
* there can be many TTs per hub). even if they're uncommon.
*/
- if ((clear = kmalloc (sizeof *clear, SLAB_ATOMIC)) == 0) {
+ if ((clear = kmalloc (sizeof *clear, SLAB_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
return;
static void hub_power_on(struct usb_hub *hub)
{
- int i;
+ int port1;
+ unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
/* if hub supports power switching, enable power on each port */
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
- dev_dbg(&hub->intf->dev, "enabling power on all ports\n");
- for (i = 0; i < hub->descriptor->bNbrPorts; i++)
- set_port_feature(hub->hdev, i + 1,
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
+ dev_dbg(hub->intfdev, "enabling power on all ports\n");
+ for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
+ set_port_feature(hub->hdev, port1,
USB_PORT_FEAT_POWER);
}
- /* Wait for power to be enabled */
- msleep(hub->descriptor->bPwrOn2PwrGood * 2);
+ /* Wait at least 100 msec for power to become stable */
+ msleep(max(pgood_delay, (unsigned) 100));
+}
+
+static inline void __hub_quiesce(struct usb_hub *hub)
+{
+ /* (nonblocking) khubd and related activity won't re-trigger */
+ hub->quiescing = 1;
+ hub->activating = 0;
+ hub->resume_root_hub = 0;
+}
+
+static void hub_quiesce(struct usb_hub *hub)
+{
+ /* (blocking) stop khubd and related activity */
+ __hub_quiesce(hub);
+ usb_kill_urb(hub->urb);
+ if (hub->has_indicators)
+ cancel_delayed_work(&hub->leds);
+ if (hub->has_indicators || hub->tt.hub)
+ flush_scheduled_work();
+}
+
+static void hub_activate(struct usb_hub *hub)
+{
+ int status;
+
+ hub->quiescing = 0;
+ hub->activating = 1;
+ hub->resume_root_hub = 0;
+ status = usb_submit_urb(hub->urb, GFP_NOIO);
+ if (status < 0)
+ dev_err(hub->intfdev, "activate --> %d\n", status);
+ if (hub->has_indicators && blinkenlights)
+ schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+
+ /* scan all ports ASAP */
+ kick_khubd(hub);
}
static int hub_hub_status(struct usb_hub *hub,
ret = get_hub_status(hub->hdev, &hub->status->hub);
if (ret < 0)
- dev_err (&hub->intf->dev,
+ dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
else {
*status = le16_to_cpu(hub->status->hub.wHubStatus);
return ret;
}
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+ struct usb_device *hdev = hub->hdev;
+ int ret;
+
+ if (hdev->children[port1-1] && set_state) {
+ usb_set_device_state(hdev->children[port1-1],
+ USB_STATE_NOTATTACHED);
+ }
+ ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+ if (ret)
+ dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+ port1, ret);
+
+ return ret;
+}
+
+
+/* caller has locked the hub device */
+static void hub_pre_reset(struct usb_hub *hub, int disable_ports)
+{
+ struct usb_device *hdev = hub->hdev;
+ int port1;
+
+ for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+ if (hdev->children[port1 - 1]) {
+ usb_disconnect(&hdev->children[port1 - 1]);
+ if (disable_ports)
+ hub_port_disable(hub, port1, 0);
+ }
+ }
+ hub_quiesce(hub);
+}
+
+/* caller has locked the hub device */
+static void hub_post_reset(struct usb_hub *hub)
+{
+ hub_activate(hub);
+ hub_power_on(hub);
+}
+
+
static int hub_configure(struct usb_hub *hub,
struct usb_endpoint_descriptor *endpoint)
{
struct usb_device *hdev = hub->hdev;
- struct device *hub_dev = &hub->intf->dev;
+ struct device *hub_dev = hub->intfdev;
u16 hubstatus, hubchange;
+ u16 wHubCharacteristics;
unsigned int pipe;
int maxp, ret;
char *message;
dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
(hdev->maxchild == 1) ? "" : "s");
- le16_to_cpus(&hub->descriptor->wHubCharacteristics);
+ wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND) {
+ if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
int i;
char portstr [USB_MAXCHILDREN + 1];
} else
dev_dbg(hub_dev, "standalone hub\n");
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) {
+ switch (wHubCharacteristics & HUB_CHAR_LPSM) {
case 0x00:
dev_dbg(hub_dev, "ganged power switching\n");
break;
break;
}
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) {
+ switch (wHubCharacteristics & HUB_CHAR_OCPM) {
case 0x00:
dev_dbg(hub_dev, "global over-current protection\n");
break;
break;
}
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) {
- case 0x00:
- if (hdev->descriptor.bDeviceProtocol != 0)
- dev_dbg(hub_dev, "TT requires at most 8 FS bit times\n");
+ /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
+ switch (wHubCharacteristics & HUB_CHAR_TTTT) {
+ case HUB_TTTT_8_BITS:
+ if (hdev->descriptor.bDeviceProtocol != 0) {
+ hub->tt.think_time = 666;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 8, hub->tt.think_time);
+ }
break;
- case 0x20:
- dev_dbg(hub_dev, "TT requires at most 16 FS bit times\n");
+ case HUB_TTTT_16_BITS:
+ hub->tt.think_time = 666 * 2;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 16, hub->tt.think_time);
break;
- case 0x40:
- dev_dbg(hub_dev, "TT requires at most 24 FS bit times\n");
+ case HUB_TTTT_24_BITS:
+ hub->tt.think_time = 666 * 3;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 24, hub->tt.think_time);
break;
- case 0x60:
- dev_dbg(hub_dev, "TT requires at most 32 FS bit times\n");
+ case HUB_TTTT_32_BITS:
+ hub->tt.think_time = 666 * 4;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 32, hub->tt.think_time);
break;
}
/* probe() zeroes hub->indicator[] */
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) {
+ if (wHubCharacteristics & HUB_CHAR_PORTIND) {
hub->has_indicators = 1;
dev_dbg(hub_dev, "Port indicators are supported\n");
}
* and battery-powered root hubs (may provide just 8 mA).
*/
ret = usb_get_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus);
- if (ret < 0) {
+ if (ret < 2) {
message = "can't get hub status";
goto fail;
}
- cpu_to_le16s(&hubstatus);
- if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+ le16_to_cpus(&hubstatus);
+ if (hdev == hdev->bus->root_hub) {
+ if (hdev->bus_mA == 0 || hdev->bus_mA >= 500)
+ hub->mA_per_port = 500;
+ else {
+ hub->mA_per_port = hdev->bus_mA;
+ hub->limited_power = 1;
+ }
+ } else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
hub->descriptor->bHubContrCurrent);
- hub->power_budget = (501 - hub->descriptor->bHubContrCurrent)
- / 2;
- dev_dbg(hub_dev, "%dmA bus power budget for children\n",
- hub->power_budget * 2);
+ hub->limited_power = 1;
+ if (hdev->maxchild > 0) {
+ int remaining = hdev->bus_mA -
+ hub->descriptor->bHubContrCurrent;
+
+ if (remaining < hdev->maxchild * 100)
+ dev_warn(hub_dev,
+ "insufficient power available "
+ "to use all downstream ports\n");
+ hub->mA_per_port = 100; /* 7.2.1.1 */
+ }
+ } else { /* Self-powered external hub */
+ /* FIXME: What about battery-powered external hubs that
+ * provide less current per port? */
+ hub->mA_per_port = 500;
}
-
+ if (hub->mA_per_port < 500)
+ dev_dbg(hub_dev, "%umA bus power budget for each child\n",
+ hub->mA_per_port);
ret = hub_hub_status(hub, &hubstatus, &hubchange);
if (ret < 0) {
(hubstatus & HUB_STATUS_LOCAL_POWER)
? "lost (inactive)" : "good");
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0)
+ if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
- /* Start the interrupt endpoint */
+ /* set up the interrupt endpoint */
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
hub, endpoint->bInterval);
hub->urb->transfer_dma = hub->buffer_dma;
hub->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- ret = usb_submit_urb(hub->urb, GFP_KERNEL);
- if (ret) {
- message = "couldn't submit status urb";
- goto fail;
- }
-
- /* Wake up khubd */
- wake_up(&khubd_wait);
- /* maybe start cycling the hub leds */
- if (hub->has_indicators && blinkenlights) {
- set_port_led(hdev, 1, HUB_LED_GREEN);
+ /* maybe cycle the hub leds */
+ if (hub->has_indicators && blinkenlights)
hub->indicator [0] = INDICATOR_CYCLE;
- schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
- }
hub_power_on(hub);
-
+ hub_activate(hub);
return 0;
fail:
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev;
- if (!hub)
- return;
+ usb_set_intfdata (intf, NULL);
hdev = hub->hdev;
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
- usb_set_intfdata (intf, NULL);
+ /* Disconnect all children and quiesce the hub */
+ hub_pre_reset(hub, 1);
- if (hub->urb) {
- usb_kill_urb(hub->urb);
- usb_free_urb(hub->urb);
- hub->urb = NULL;
- }
+ usb_free_urb(hub->urb);
+ hub->urb = NULL;
spin_lock_irq(&hub_event_lock);
list_del_init(&hub->event_list);
spin_unlock_irq(&hub_event_lock);
- /* assuming we used keventd, it must quiesce too */
- if (hub->has_indicators)
- cancel_delayed_work (&hub->leds);
- if (hub->has_indicators || hub->tt.hub)
- flush_scheduled_work ();
-
- if (hub->descriptor) {
- kfree(hub->descriptor);
- hub->descriptor = NULL;
- }
+ kfree(hub->descriptor);
+ hub->descriptor = NULL;
- if (hub->status) {
- kfree(hub->status);
- hub->status = NULL;
- }
+ kfree(hub->status);
+ hub->status = NULL;
if (hub->buffer) {
usb_buffer_free(hdev, sizeof(*hub->buffer), hub->buffer,
hub->buffer = NULL;
}
- /* Free the memory */
kfree(hub);
}
struct usb_endpoint_descriptor *endpoint;
struct usb_device *hdev;
struct usb_hub *hub;
- struct device *hub_dev;
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
- hub_dev = &intf->dev;
/* Some hubs have a subclass of 1, which AFAICT according to the */
/* specs is not defined, but it works */
if ((desc->desc.bInterfaceSubClass != 0) &&
(desc->desc.bInterfaceSubClass != 1)) {
descriptor_error:
- dev_err (hub_dev, "bad descriptor, ignoring hub\n");
+ dev_err (&intf->dev, "bad descriptor, ignoring hub\n");
return -EIO;
}
goto descriptor_error;
/* We found a hub */
- dev_info (hub_dev, "USB hub found\n");
+ dev_info (&intf->dev, "USB hub found\n");
- hub = kmalloc(sizeof(*hub), GFP_KERNEL);
+ hub = kzalloc(sizeof(*hub), GFP_KERNEL);
if (!hub) {
- dev_dbg (hub_dev, "couldn't kmalloc hub struct\n");
+ dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
return -ENOMEM;
}
- memset(hub, 0, sizeof(*hub));
-
INIT_LIST_HEAD(&hub->event_list);
- hub->intf = intf;
+ hub->intfdev = &intf->dev;
hub->hdev = hdev;
INIT_WORK(&hub->leds, led_work, hub);
switch (code) {
case USBDEVFS_HUB_PORTINFO: {
struct usbdevfs_hub_portinfo *info = user_data;
- unsigned long flags;
int i;
- spin_lock_irqsave(&hub_event_lock, flags);
+ spin_lock_irq(&device_state_lock);
if (hdev->devnum <= 0)
info->nports = 0;
else {
hdev->children[i]->devnum;
}
}
- spin_unlock_irqrestore(&hub_event_lock, flags);
+ spin_unlock_irq(&device_state_lock);
return info->nports + 1;
}
}
}
-static int hub_reset(struct usb_hub *hub)
-{
- struct usb_device *hdev = hub->hdev;
- int i;
-
- /* Disconnect any attached devices */
- for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
- if (hdev->children[i])
- usb_disconnect(&hdev->children[i]);
- }
- /* Attempt to reset the hub */
- if (hub->urb)
- usb_kill_urb(hub->urb);
- else
- return -1;
-
- if (usb_reset_device(hdev))
- return -1;
-
- hub->urb->dev = hdev;
- if (usb_submit_urb(hub->urb, GFP_KERNEL))
- return -1;
+/* grab device/port lock, returning index of that port (zero based).
+ * protects the upstream link used by this device from concurrent
+ * tree operations like suspend, resume, reset, and disconnect, which
+ * apply to everything downstream of a given port.
+ */
+static int locktree(struct usb_device *udev)
+{
+ int t;
+ struct usb_device *hdev;
- hub_power_on(hub);
+ if (!udev)
+ return -ENODEV;
- return 0;
-}
+ /* root hub is always the first lock in the series */
+ hdev = udev->parent;
+ if (!hdev) {
+ usb_lock_device(udev);
+ return 0;
+ }
-/* FIXME! This routine should be subsumed into hub_reset */
-static void hub_start_disconnect(struct usb_device *hdev)
-{
- struct usb_device *parent = hdev->parent;
- int i;
+ /* on the path from root to us, lock everything from
+ * top down, dropping parent locks when not needed
+ */
+ t = locktree(hdev);
+ if (t < 0)
+ return t;
- /* Find the device pointer to disconnect */
- if (parent) {
- for (i = 0; i < parent->maxchild; i++) {
- if (parent->children[i] == hdev) {
- usb_disconnect(&parent->children[i]);
- return;
- }
- }
+ /* everything is fail-fast once disconnect
+ * processing starts
+ */
+ if (udev->state == USB_STATE_NOTATTACHED) {
+ usb_unlock_device(hdev);
+ return -ENODEV;
}
- dev_err(&hdev->dev, "cannot disconnect hub!\n");
+ /* when everyone grabs locks top->bottom,
+ * non-overlapping work may be concurrent
+ */
+ usb_lock_device(udev);
+ usb_unlock_device(hdev);
+ return udev->portnum;
}
-
static void recursively_mark_NOTATTACHED(struct usb_device *udev)
{
int i;
}
/**
- * usb_set_device_state - change a device's current state (usbcore-internal)
+ * usb_set_device_state - change a device's current state (usbcore, hcds)
* @udev: pointer to device whose state should be changed
* @new_state: new state value to be stored
*
- * udev->state is _not_ protected by the udev->serialize semaphore. This
+ * udev->state is _not_ fully protected by the device lock. Although
+ * most transitions are made only while holding the lock, the state can
+ * can change to USB_STATE_NOTATTACHED at almost any time. This
* is so that devices can be marked as disconnected as soon as possible,
- * without having to wait for the semaphore to be released. Instead,
- * changes to the state must be protected by the device_state_lock spinlock.
+ * without having to wait for any semaphores to be released. As a result,
+ * all changes to any device's state must be protected by the
+ * device_state_lock spinlock.
*
* Once a device has been added to the device tree, all changes to its state
* should be made using this routine. The state should _not_ be set directly.
*
* If udev->state is already USB_STATE_NOTATTACHED then no change is made.
* Otherwise udev->state is set to new_state, and if new_state is
- * USB_STATE_NOTATTACHED then all of udev's descendant's states are also set
+ * USB_STATE_NOTATTACHED then all of udev's descendants' states are also set
* to USB_STATE_NOTATTACHED.
*/
void usb_set_device_state(struct usb_device *udev,
spin_lock_irqsave(&device_state_lock, flags);
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
- else if (new_state != USB_STATE_NOTATTACHED)
+ else if (new_state != USB_STATE_NOTATTACHED) {
udev->state = new_state;
- else
+ if (new_state == USB_STATE_CONFIGURED)
+ device_init_wakeup(&udev->dev,
+ (udev->actconfig->desc.bmAttributes
+ & USB_CONFIG_ATT_WAKEUP));
+ else if (new_state != USB_STATE_SUSPENDED)
+ device_init_wakeup(&udev->dev, 0);
+ } else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
+EXPORT_SYMBOL(usb_set_device_state);
+
+
+#ifdef CONFIG_PM
+
+/**
+ * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
+ * @rhdev: struct usb_device for the root hub
+ *
+ * The USB host controller driver calls this function when its root hub
+ * is resumed and Vbus power has been interrupted or the controller
+ * has been reset. The routine marks all the children of the root hub
+ * as NOTATTACHED and marks logical connect-change events on their ports.
+ */
+void usb_root_hub_lost_power(struct usb_device *rhdev)
+{
+ struct usb_hub *hub;
+ int port1;
+ unsigned long flags;
+
+ dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
+ spin_lock_irqsave(&device_state_lock, flags);
+ hub = hdev_to_hub(rhdev);
+ for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
+ if (rhdev->children[port1 - 1]) {
+ recursively_mark_NOTATTACHED(
+ rhdev->children[port1 - 1]);
+ set_bit(port1, hub->change_bits);
+ }
+ }
+ spin_unlock_irqrestore(&device_state_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
+#endif
static void choose_address(struct usb_device *udev)
{
* @pdev: pointer to device being disconnected
* Context: !in_interrupt ()
*
- * Something got disconnected. Get rid of it, and all of its children.
- * If *pdev is a normal device then the parent hub should be locked.
+ * Something got disconnected. Get rid of it and all of its children.
+ *
+ * If *pdev is a normal device then the parent hub must already be locked.
* If *pdev is a root hub then this routine will acquire the
* usb_bus_list_lock on behalf of the caller.
*
}
/* mark the device as inactive, so any further urb submissions for
- * this device will fail.
+ * this device (and any of its children) will fail immediately.
+ * this quiesces everyting except pending urbs.
*/
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
-
- /* lock the bus list on behalf of HCDs unregistering their root hubs */
- if (!udev->parent)
- down(&usb_bus_list_lock);
- down(&udev->serialize);
-
dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
+ usb_lock_device(udev);
+
/* Free up all the children before we remove this device */
for (i = 0; i < USB_MAXCHILDREN; i++) {
if (udev->children[i])
/* deallocate hcd/hardware state ... nuking all pending urbs and
* cleaning up all state associated with the current configuration
+ * so that the hardware is now fully quiesced.
*/
usb_disable_device(udev, 0);
+ usb_notify_remove_device(udev);
+
/* Free the device number, remove the /proc/bus/usb entry and
* the sysfs attributes, and delete the parent's children[]
* (or root_hub) pointer.
*/
dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
- usbfs_remove_device(udev);
usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
- up(&udev->serialize);
- if (!udev->parent)
- up(&usb_bus_list_lock);
+ usb_unlock_device(udev);
device_unregister(&udev->dev);
}
+static inline const char *plural(int n)
+{
+ return (n == 1 ? "" : "s");
+}
+
static int choose_configuration(struct usb_device *udev)
{
- int c, i;
+ int i;
+ u16 devstatus;
+ int bus_powered;
+ int num_configs;
+ struct usb_host_config *c, *best;
+
+ /* If this fails, assume the device is bus-powered */
+ devstatus = 0;
+ usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+ le16_to_cpus(&devstatus);
+ bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
+ dev_dbg(&udev->dev, "device is %s-powered\n",
+ bus_powered ? "bus" : "self");
+
+ best = NULL;
+ c = udev->config;
+ num_configs = udev->descriptor.bNumConfigurations;
+ for (i = 0; i < num_configs; (i++, c++)) {
+ struct usb_interface_descriptor *desc =
+ &c->intf_cache[0]->altsetting->desc;
+
+ /*
+ * HP's USB bus-powered keyboard has only one configuration
+ * and it claims to be self-powered; other devices may have
+ * similar errors in their descriptors. If the next test
+ * were allowed to execute, such configurations would always
+ * be rejected and the devices would not work as expected.
+ */
+#if 0
+ /* Rule out self-powered configs for a bus-powered device */
+ if (bus_powered && (c->desc.bmAttributes &
+ USB_CONFIG_ATT_SELFPOWER))
+ continue;
+#endif
- /* NOTE: this should interact with hub power budgeting */
+ /*
+ * The next test may not be as effective as it should be.
+ * Some hubs have errors in their descriptor, claiming
+ * to be self-powered when they are really bus-powered.
+ * We will overestimate the amount of current such hubs
+ * make available for each port.
+ *
+ * This is a fairly benign sort of failure. It won't
+ * cause us to reject configurations that we should have
+ * accepted.
+ */
- c = udev->config[0].desc.bConfigurationValue;
- if (udev->descriptor.bNumConfigurations != 1) {
- for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
- struct usb_interface_descriptor *desc;
+ /* Rule out configs that draw too much bus current */
+ if (c->desc.bMaxPower * 2 > udev->bus_mA)
+ continue;
- /* heuristic: Linux is more likely to have class
- * drivers, so avoid vendor-specific interfaces.
- */
- desc = &udev->config[i].intf_cache[0]
- ->altsetting->desc;
- if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
- continue;
- /* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS */
- if (desc->bInterfaceClass == USB_CLASS_COMM
- && desc->bInterfaceSubClass == 2
- && desc->bInterfaceProtocol == 0xff)
- continue;
- c = udev->config[i].desc.bConfigurationValue;
+ /* If the first config's first interface is COMM/2/0xff
+ * (MSFT RNDIS), rule it out unless Linux has host-side
+ * RNDIS support. */
+ if (i == 0 && desc->bInterfaceClass == USB_CLASS_COMM
+ && desc->bInterfaceSubClass == 2
+ && desc->bInterfaceProtocol == 0xff) {
+#ifndef CONFIG_USB_NET_RNDIS
+ continue;
+#else
+ best = c;
+#endif
+ }
+
+ /* From the remaining configs, choose the first one whose
+ * first interface is for a non-vendor-specific class.
+ * Reason: Linux is more likely to have a class driver
+ * than a vendor-specific driver. */
+ else if (udev->descriptor.bDeviceClass !=
+ USB_CLASS_VENDOR_SPEC &&
+ desc->bInterfaceClass !=
+ USB_CLASS_VENDOR_SPEC) {
+ best = c;
break;
}
+
+ /* If all the remaining configs are vendor-specific,
+ * choose the first one. */
+ else if (!best)
+ best = c;
+ }
+
+ if (best) {
+ i = best->desc.bConfigurationValue;
dev_info(&udev->dev,
- "configuration #%d chosen from %d choices\n",
- c, udev->descriptor.bNumConfigurations);
+ "configuration #%d chosen from %d choice%s\n",
+ i, num_configs, plural(num_configs));
+ } else {
+ i = -1;
+ dev_warn(&udev->dev,
+ "no configuration chosen from %d choice%s\n",
+ num_configs, plural(num_configs));
}
- return c;
+ return i;
}
#ifdef DEBUG
-static void show_string(struct usb_device *udev, char *id, int index)
+static void show_string(struct usb_device *udev, char *id, char *string)
{
- char *buf;
-
- if (!index)
+ if (!string)
return;
- if (!(buf = kmalloc(256, GFP_KERNEL)))
- return;
- if (usb_string(udev, index, buf, 256) > 0)
- dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, buf);
- kfree(buf);
+ dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string);
}
#else
-static inline void show_string(struct usb_device *udev, char *id, int index)
+static inline void show_string(struct usb_device *udev, char *id, char *string)
{}
#endif
+
+#ifdef CONFIG_USB_OTG
+#include "otg_whitelist.h"
+#endif
+
/**
* usb_new_device - perform initial device setup (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
* This is called with devices which have been enumerated, but not yet
* configured. The device descriptor is available, but not descriptors
- * for any device configuration. The caller must have locked udev and
- * either the parent hub (if udev is a normal device) or else the
+ * for any device configuration. The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
* usb_bus_list_lock (if udev is a root hub). The parent's pointer to
* udev has already been installed, but udev is not yet visible through
* sysfs or other filesystem code.
*
* This call is synchronous, and may not be used in an interrupt context.
*
- * Only the hub driver should ever call this; root hub registration
- * uses it indirectly.
+ * Only the hub driver or root-hub registrar should ever call this.
*/
int usb_new_device(struct usb_device *udev)
{
goto fail;
}
+ /* read the standard strings and cache them if present */
+ udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+ udev->manufacturer = usb_cache_string(udev,
+ udev->descriptor.iManufacturer);
+ udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+
/* Tell the world! */
dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
"SerialNumber=%d\n",
udev->descriptor.iManufacturer,
udev->descriptor.iProduct,
udev->descriptor.iSerialNumber);
+ show_string(udev, "Product", udev->product);
+ show_string(udev, "Manufacturer", udev->manufacturer);
+ show_string(udev, "SerialNumber", udev->serial);
+
+#ifdef CONFIG_USB_OTG
+ /*
+ * OTG-aware devices on OTG-capable root hubs may be able to use SRP,
+ * to wake us after we've powered off VBUS; and HNP, switching roles
+ * "host" to "peripheral". The OTG descriptor helps figure this out.
+ */
+ if (!udev->bus->is_b_host
+ && udev->config
+ && udev->parent == udev->bus->root_hub) {
+ struct usb_otg_descriptor *desc = 0;
+ struct usb_bus *bus = udev->bus;
+
+ /* descriptor may appear anywhere in config */
+ if (__usb_get_extra_descriptor (udev->rawdescriptors[0],
+ le16_to_cpu(udev->config[0].desc.wTotalLength),
+ USB_DT_OTG, (void **) &desc) == 0) {
+ if (desc->bmAttributes & USB_OTG_HNP) {
+ unsigned port1 = udev->portnum;
+ struct usb_device *root = udev->parent;
+
+ dev_info(&udev->dev,
+ "Dual-Role OTG device on %sHNP port\n",
+ (port1 == bus->otg_port)
+ ? "" : "non-");
+
+ /* enable HNP before suspend, it's simpler */
+ if (port1 == bus->otg_port)
+ bus->b_hnp_enable = 1;
+ err = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ bus->b_hnp_enable
+ ? USB_DEVICE_B_HNP_ENABLE
+ : USB_DEVICE_A_ALT_HNP_SUPPORT,
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (err < 0) {
+ /* OTG MESSAGE: report errors here,
+ * customize to match your product.
+ */
+ dev_info(&udev->dev,
+ "can't set HNP mode; %d\n",
+ err);
+ bus->b_hnp_enable = 0;
+ }
+ }
+ }
+ }
- if (udev->descriptor.iProduct)
- show_string(udev, "Product",
- udev->descriptor.iProduct);
- if (udev->descriptor.iManufacturer)
- show_string(udev, "Manufacturer",
- udev->descriptor.iManufacturer);
- if (udev->descriptor.iSerialNumber)
- show_string(udev, "SerialNumber",
- udev->descriptor.iSerialNumber);
+ if (!is_targeted(udev)) {
+
+ /* Maybe it can talk to us, though we can't talk to it.
+ * (Includes HNP test device.)
+ */
+ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
+ static int __usb_suspend_device(struct usb_device *,
+ int port1);
+ err = __usb_suspend_device(udev, udev->bus->otg_port);
+ if (err < 0)
+ dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+ }
+ err = -ENODEV;
+ goto fail;
+ }
+#endif
/* put device-specific files into sysfs */
err = device_add (&udev->dev);
}
usb_create_sysfs_dev_files (udev);
+ usb_lock_device(udev);
+
/* choose and set the configuration. that registers the interfaces
* with the driver core, and lets usb device drivers bind to them.
*/
c = choose_configuration(udev);
- if (c < 0)
- dev_warn(&udev->dev,
- "can't choose an initial configuration\n");
- else {
+ if (c >= 0) {
err = usb_set_configuration(udev, c);
if (err) {
dev_err(&udev->dev, "can't set config #%d, error %d\n",
c, err);
- usb_remove_sysfs_dev_files(udev);
- device_del(&udev->dev);
- goto fail;
+ /* This need not be fatal. The user can try to
+ * set other configurations. */
}
}
/* USB device state == configured ... usable */
+ usb_notify_add_device(udev);
+
+ usb_unlock_device(udev);
- /* add a /proc/bus/usb entry */
- usbfs_add_device(udev);
return 0;
fail:
}
-static int hub_port_status(struct usb_device *hdev, int port,
+static int hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change)
{
- struct usb_hub *hub = usb_get_intfdata(hdev->actconfig->interface[0]);
int ret;
- if (!hub)
- return -ENODEV;
-
- ret = get_port_status(hdev, port + 1, &hub->status->port);
+ ret = get_port_status(hub->hdev, port1, &hub->status->port);
if (ret < 0)
- dev_err (&hub->intf->dev,
+ dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
-#define SET_CONFIG_TRIES 2
+#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
+#define USE_NEW_SCHEME(i) ((i) / 2 == old_scheme_first)
#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
#define HUB_LONG_RESET_TIME 200
#define HUB_RESET_TIMEOUT 500
-static int hub_port_wait_reset(struct usb_device *hdev, int port,
+static int hub_port_wait_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay)
{
int delay_time, ret;
msleep(delay);
/* read and decode port status */
- ret = hub_port_status(hdev, port, &portstatus, &portchange);
+ ret = hub_port_status(hub, port1, &portstatus, &portchange);
if (ret < 0)
return ret;
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
- dev_dbg (hubdev (hdev),
+ dev_dbg (hub->intfdev,
"port %d not reset yet, waiting %dms\n",
- port + 1, delay);
+ port1, delay);
}
return -EBUSY;
}
-static int hub_port_reset(struct usb_device *hdev, int port,
+static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay)
{
int i, status;
- struct device *hub_dev = hubdev (hdev);
/* Reset the port */
for (i = 0; i < PORT_RESET_TRIES; i++) {
- status = set_port_feature(hdev, port + 1, USB_PORT_FEAT_RESET);
+ status = set_port_feature(hub->hdev,
+ port1, USB_PORT_FEAT_RESET);
if (status)
- dev_err(hub_dev, "cannot reset port %d (err = %d)\n",
- port + 1, status);
- else
- status = hub_port_wait_reset(hdev, port, udev, delay);
+ dev_err(hub->intfdev,
+ "cannot reset port %d (err = %d)\n",
+ port1, status);
+ else {
+ status = hub_port_wait_reset(hub, port1, udev, delay);
+ if (status && status != -ENOTCONN)
+ dev_dbg(hub->intfdev,
+ "port_wait_reset: err = %d\n",
+ status);
+ }
/* return on disconnect or reset */
- if (status == -ENOTCONN || status == 0) {
- clear_port_feature(hdev,
- port + 1, USB_PORT_FEAT_C_RESET);
+ switch (status) {
+ case 0:
+ /* TRSTRCY = 10 ms; plus some extra */
+ msleep(10 + 40);
+ /* FALL THROUGH */
+ case -ENOTCONN:
+ case -ENODEV:
+ clear_port_feature(hub->hdev,
+ port1, USB_PORT_FEAT_C_RESET);
+ /* FIXME need disconnect() for NOTATTACHED device */
usb_set_device_state(udev, status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
return status;
}
- dev_dbg (hub_dev,
+ dev_dbg (hub->intfdev,
"port %d not enabled, trying reset again...\n",
- port + 1);
+ port1);
delay = HUB_LONG_RESET_TIME;
}
- dev_err (hub_dev,
+ dev_err (hub->intfdev,
"Cannot enable port %i. Maybe the USB cable is bad?\n",
- port + 1);
+ port1);
return status;
}
-static int hub_port_disable(struct usb_device *hdev, int port)
+/*
+ * Disable a port and mark a logical connnect-change event, so that some
+ * time later khubd will disconnect() any existing usb_device on the port
+ * and will re-enumerate if there actually is a device attached.
+ */
+static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
{
- int ret;
-
- if (hdev->children[port])
- usb_set_device_state(hdev->children[port],
- USB_STATE_NOTATTACHED);
- ret = clear_port_feature(hdev, port + 1, USB_PORT_FEAT_ENABLE);
- if (ret)
- dev_err(hubdev(hdev), "cannot disable port %d (err = %d)\n",
- port + 1, ret);
+ dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1);
+ hub_port_disable(hub, port1, 1);
+
+ /* FIXME let caller ask to power down the port:
+ * - some devices won't enumerate without a VBUS power cycle
+ * - SRP saves power that way
+ * - ... new call, TBD ...
+ * That's easy if this hub can switch power per-port, and
+ * khubd reactivates the port later (timer, SRP, etc).
+ * Powerdown must be optional, because of reset/DFU.
+ */
- return ret;
+ set_bit(port1, hub->change_bits);
+ kick_khubd(hub);
}
+
#ifdef CONFIG_USB_SUSPEND
- /* no USB_SUSPEND yet! */
+/*
+ * Selective port suspend reduces power; most suspended devices draw
+ * less than 500 uA. It's also used in OTG, along with remote wakeup.
+ * All devices below the suspended port are also suspended.
+ *
+ * Devices leave suspend state when the host wakes them up. Some devices
+ * also support "remote wakeup", where the device can activate the USB
+ * tree above them to deliver data, such as a keypress or packet. In
+ * some cases, this wakes the USB host.
+ */
+static int hub_port_suspend(struct usb_hub *hub, int port1,
+ struct usb_device *udev)
+{
+ int status;
+
+ // dev_dbg(hub->intfdev, "suspend port %d\n", port1);
-#else /* !CONFIG_USB_SUSPEND */
+ /* enable remote wakeup when appropriate; this lets the device
+ * wake up the upstream hub (including maybe the root hub).
+ *
+ * NOTE: OTG devices may issue remote wakeup (or SRP) even when
+ * we don't explicitly enable it here.
+ */
+ if (device_may_wakeup(&udev->dev)) {
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (status)
+ dev_dbg(&udev->dev,
+ "won't remote wakeup, status %d\n",
+ status);
+ }
+
+ /* see 7.1.7.6 */
+ status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
+ if (status) {
+ dev_dbg(hub->intfdev,
+ "can't suspend port %d, status %d\n",
+ port1, status);
+ /* paranoia: "should not happen" */
+ (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ /* device has up to 10 msec to fully suspend */
+ dev_dbg(&udev->dev, "usb suspend\n");
+ usb_set_device_state(udev, USB_STATE_SUSPENDED);
+ msleep(10);
+ }
+ return status;
+}
-int usb_suspend_device(struct usb_device *udev, u32 state)
+/*
+ * Devices on USB hub ports have only one "suspend" state, corresponding
+ * to ACPI D2, "may cause the device to lose some context".
+ * State transitions include:
+ *
+ * - suspend, resume ... when the VBUS power link stays live
+ * - suspend, disconnect ... VBUS lost
+ *
+ * Once VBUS drop breaks the circuit, the port it's using has to go through
+ * normal re-enumeration procedures, starting with enabling VBUS power.
+ * Other than re-initializing the hub (plug/unplug, except for root hubs),
+ * Linux (2.6) currently has NO mechanisms to initiate that: no khubd
+ * timer, no SRP, no requests through sysfs.
+ *
+ * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when
+ * the root hub for their bus goes into global suspend ... so we don't
+ * (falsely) update the device power state to say it suspended.
+ */
+static int __usb_suspend_device (struct usb_device *udev, int port1)
{
+ int status = 0;
+
+ /* caller owns the udev device lock */
+ if (port1 < 0)
+ return port1;
+
+ if (udev->state == USB_STATE_SUSPENDED
+ || udev->state == USB_STATE_NOTATTACHED) {
+ return 0;
+ }
+
+ /* all interfaces must already be suspended */
+ if (udev->actconfig) {
+ int i;
+
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+
+ intf = udev->actconfig->interface[i];
+ if (is_active(intf)) {
+ dev_dbg(&intf->dev, "nyet suspended\n");
+ return -EBUSY;
+ }
+ }
+ }
+
+ /* we only change a device's upstream USB link.
+ * root hubs have no upstream USB link.
+ */
+ if (udev->parent)
+ status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
+ udev);
+
+ if (status == 0)
+ udev->dev.power.power_state = PMSG_SUSPEND;
+ return status;
+}
+
+#endif
+
+/*
+ * usb_suspend_device - suspend a usb device
+ * @udev: device that's no longer in active use
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * Suspends a USB device that isn't in active use, conserving power.
+ * Devices may wake out of a suspend, if anything important happens,
+ * using the remote wakeup mechanism. They may also be taken out of
+ * suspend by the host, using usb_resume_device(). It's also routine
+ * to disconnect devices while they are suspended.
+ *
+ * This only affects the USB hardware for a device; its interfaces
+ * (and, for hubs, child devices) must already have been suspended.
+ *
+ * Suspending OTG devices may trigger HNP, if that's been enabled
+ * between a pair of dual-role devices. That will change roles, such
+ * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_suspend_device(struct usb_device *udev)
+{
+#ifdef CONFIG_USB_SUSPEND
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return -ENODEV;
+ return __usb_suspend_device(udev, udev->portnum);
+#else
+ /* NOTE: udev->state unchanged, it's not lying ... */
+ udev->dev.power.power_state = PMSG_SUSPEND;
return 0;
+#endif
+}
+
+/*
+ * If the USB "suspend" state is in use (rather than "global suspend"),
+ * many devices will be individually taken out of suspend state using
+ * special" resume" signaling. These routines kick in shortly after
+ * hardware resume signaling is finished, either because of selective
+ * resume (by host) or remote wakeup (by device) ... now see what changed
+ * in the tree that's rooted at this device.
+ */
+static int finish_device_resume(struct usb_device *udev)
+{
+ int status;
+ u16 devstatus;
+
+ /* caller owns the udev device lock */
+ dev_dbg(&udev->dev, "finish resume\n");
+
+ /* usb ch9 identifies four variants of SUSPENDED, based on what
+ * state the device resumes to. Linux currently won't see the
+ * first two on the host side; they'd be inside hub_port_init()
+ * during many timeouts, but khubd can't suspend until later.
+ */
+ usb_set_device_state(udev, udev->actconfig
+ ? USB_STATE_CONFIGURED
+ : USB_STATE_ADDRESS);
+ udev->dev.power.power_state = PMSG_ON;
+
+ /* 10.5.4.5 says be sure devices in the tree are still there.
+ * For now let's assume the device didn't go crazy on resume,
+ * and device drivers will know about any resume quirks.
+ */
+ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+ if (status < 2)
+ dev_dbg(&udev->dev,
+ "gone after usb resume? status %d\n",
+ status);
+ else if (udev->actconfig) {
+ unsigned i;
+ int (*resume)(struct device *);
+
+ le16_to_cpus(&devstatus);
+ if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
+ && udev->parent) {
+ status = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (status) {
+ dev_dbg(&udev->dev, "disable remote "
+ "wakeup, status %d\n", status);
+ status = 0;
+ }
+ }
+
+ /* resume interface drivers; if this is a hub, it
+ * may have a child resume event to deal with soon
+ */
+ resume = udev->dev.bus->resume;
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct device *dev =
+ &udev->actconfig->interface[i]->dev;
+
+ down(&dev->sem);
+ (void) resume(dev);
+ up(&dev->sem);
+ }
+ status = 0;
+
+ } else if (udev->devnum <= 0) {
+ dev_dbg(&udev->dev, "bogus resume!\n");
+ status = -EINVAL;
+ }
+ return status;
}
+#ifdef CONFIG_USB_SUSPEND
+
+static int
+hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
+{
+ int status;
+
+ // dev_dbg(hub->intfdev, "resume port %d\n", port1);
+
+ /* see 7.1.7.7; affects power usage, but not budgeting */
+ status = clear_port_feature(hub->hdev,
+ port1, USB_PORT_FEAT_SUSPEND);
+ if (status) {
+ dev_dbg(hub->intfdev,
+ "can't resume port %d, status %d\n",
+ port1, status);
+ } else {
+ u16 devstatus;
+ u16 portchange;
+
+ /* drive resume for at least 20 msec */
+ if (udev)
+ dev_dbg(&udev->dev, "RESUME\n");
+ msleep(25);
+
+#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
+ | USB_PORT_STAT_ENABLE \
+ | USB_PORT_STAT_CONNECTION)
+
+ /* Virtual root hubs can trigger on GET_PORT_STATUS to
+ * stop resume signaling. Then finish the resume
+ * sequence.
+ */
+ devstatus = portchange = 0;
+ status = hub_port_status(hub, port1,
+ &devstatus, &portchange);
+ if (status < 0
+ || (devstatus & LIVE_FLAGS) != LIVE_FLAGS
+ || (devstatus & USB_PORT_STAT_SUSPEND) != 0
+ ) {
+ dev_dbg(hub->intfdev,
+ "port %d status %04x.%04x after resume, %d\n",
+ port1, portchange, devstatus, status);
+ } else {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ if (udev)
+ status = finish_device_resume(udev);
+ }
+ }
+ if (status < 0)
+ hub_port_logical_disconnect(hub, port1);
+
+ return status;
+}
+
+#endif
+
+/*
+ * usb_resume_device - re-activate a suspended usb device
+ * @udev: device to re-activate
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * This will re-activate the suspended device, increasing power usage
+ * while letting drivers communicate again with its endpoints.
+ * USB resume explicitly guarantees that the power session between
+ * the host and the device is the same as it was when the device
+ * suspended.
+ *
+ * Returns 0 on success, else negative errno.
+ */
int usb_resume_device(struct usb_device *udev)
{
+ int status;
+
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return -ENODEV;
+
+#ifdef CONFIG_USB_SUSPEND
+ /* selective resume of one downstream hub-to-device port */
+ if (udev->parent) {
+ if (udev->state == USB_STATE_SUSPENDED) {
+ // NOTE swsusp may bork us, device state being wrong...
+ // NOTE this fails if parent is also suspended...
+ status = hub_port_resume(hdev_to_hub(udev->parent),
+ udev->portnum, udev);
+ } else
+ status = 0;
+ } else
+#endif
+ status = finish_device_resume(udev);
+ if (status < 0)
+ dev_dbg(&udev->dev, "can't resume, status %d\n",
+ status);
+
+ /* rebind drivers that had no suspend() */
+ if (status == 0) {
+ usb_unlock_device(udev);
+ bus_rescan_devices(&usb_bus_type);
+ usb_lock_device(udev);
+ }
+ return status;
+}
+
+static int remote_wakeup(struct usb_device *udev)
+{
+ int status = 0;
+
+#ifdef CONFIG_USB_SUSPEND
+
+ /* don't repeat RESUME sequence if this device
+ * was already woken up by some other task
+ */
+ usb_lock_device(udev);
+ if (udev->state == USB_STATE_SUSPENDED) {
+ dev_dbg(&udev->dev, "RESUME (wakeup)\n");
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ status = finish_device_resume(udev);
+ }
+ usb_unlock_device(udev);
+#endif
+ return status;
+}
+
+static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+ struct usb_hub *hub = usb_get_intfdata (intf);
+ struct usb_device *hdev = hub->hdev;
+ unsigned port1;
+
+ /* fail if children aren't already suspended */
+ for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+ struct usb_device *udev;
+
+ udev = hdev->children [port1-1];
+ if (udev && (udev->dev.power.power_state.event
+ == PM_EVENT_ON
+#ifdef CONFIG_USB_SUSPEND
+ || udev->state != USB_STATE_SUSPENDED
+#endif
+ )) {
+ dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ return -EBUSY;
+ }
+ }
+
+ /* "global suspend" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ int status = hcd_bus_suspend (bus);
+
+ if (status != 0) {
+ dev_dbg(&hdev->dev, "'global' suspend %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ }
+
+ /* stop khubd and related activity */
+ hub_quiesce(hub);
+ return 0;
+}
+
+static int hub_resume(struct usb_interface *intf)
+{
+ struct usb_device *hdev = interface_to_usbdev(intf);
+ struct usb_hub *hub = usb_get_intfdata (intf);
+ int status;
+
+ /* "global resume" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ status = hcd_bus_resume (bus);
+ if (status) {
+ dev_dbg(&intf->dev, "'global' resume %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ }
+ }
+
+ hub_activate(hub);
+
+ /* REVISIT: this recursion probably shouldn't exist. Remove
+ * this code sometime, after retesting with different root and
+ * external hubs.
+ */
+#ifdef CONFIG_USB_SUSPEND
+ {
+ unsigned port1;
+
+ for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+ struct usb_device *udev;
+ u16 portstat, portchange;
+
+ udev = hdev->children [port1-1];
+ status = hub_port_status(hub, port1, &portstat, &portchange);
+ if (status == 0) {
+ if (portchange & USB_PORT_STAT_C_SUSPEND) {
+ clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_C_SUSPEND);
+ portchange &= ~USB_PORT_STAT_C_SUSPEND;
+ }
+
+ /* let khubd handle disconnects etc */
+ if (portchange)
+ continue;
+ }
+
+ if (!udev || status < 0)
+ continue;
+ usb_lock_device(udev);
+ if (portstat & USB_PORT_STAT_SUSPEND)
+ status = hub_port_resume(hub, port1, udev);
+ else {
+ status = finish_device_resume(udev);
+ if (status < 0) {
+ dev_dbg(&intf->dev, "resume port %d --> %d\n",
+ port1, status);
+ hub_port_logical_disconnect(hub, port1);
+ }
+ }
+ usb_unlock_device(udev);
+ }
+ }
+#endif
return 0;
}
-#define hub_suspend NULL
-#define hub_resume NULL
-#define remote_wakeup(x) 0
+void usb_suspend_root_hub(struct usb_device *hdev)
+{
+ struct usb_hub *hub = hdev_to_hub(hdev);
-#endif /* CONFIG_USB_SUSPEND */
+ /* This also makes any led blinker stop retriggering. We're called
+ * from irq, so the blinker might still be scheduled. Caller promises
+ * that the root hub status URB will be canceled.
+ */
+ __hub_quiesce(hub);
+ mark_quiesced(to_usb_interface(hub->intfdev));
+}
-EXPORT_SYMBOL(usb_suspend_device);
-EXPORT_SYMBOL(usb_resume_device);
+void usb_resume_root_hub(struct usb_device *hdev)
+{
+ struct usb_hub *hub = hdev_to_hub(hdev);
+ hub->resume_root_hub = 1;
+ kick_khubd(hub);
+}
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
#define HUB_DEBOUNCE_STEP 25
#define HUB_DEBOUNCE_STABLE 100
-static int hub_port_debounce(struct usb_device *hdev, int port)
+static int hub_port_debounce(struct usb_hub *hub, int port1)
{
int ret;
int total_time, stable_time = 0;
unsigned connection = 0xffff;
for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
- ret = hub_port_status(hdev, port, &portstatus, &portchange);
+ ret = hub_port_status(hub, port1, &portstatus, &portchange);
if (ret < 0)
return ret;
}
if (portchange & USB_PORT_STAT_C_CONNECTION) {
- clear_port_feature(hdev, port+1,
+ clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_CONNECTION);
}
msleep(HUB_DEBOUNCE_STEP);
}
- dev_dbg (hubdev (hdev),
+ dev_dbg (hub->intfdev,
"debounce: port %d: total %dms stable %dms status 0x%x\n",
- port + 1, total_time, stable_time, portstatus);
+ port1, total_time, stable_time, portstatus);
if (stable_time < HUB_DEBOUNCE_STABLE)
return -ETIMEDOUT;
return portstatus;
}
+static void ep0_reinit(struct usb_device *udev)
+{
+ usb_disable_endpoint(udev, 0 + USB_DIR_IN);
+ usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ udev->ep_in[0] = udev->ep_out[0] = &udev->ep0;
+}
+
+#define usb_sndaddr0pipe() (PIPE_CONTROL << 30)
+#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN)
+
static int hub_set_address(struct usb_device *udev)
{
int retval;
if (udev->devnum == 0)
return -EINVAL;
- if (udev->state != USB_STATE_DEFAULT &&
- udev->state != USB_STATE_ADDRESS)
+ if (udev->state == USB_STATE_ADDRESS)
+ return 0;
+ if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
- retval = usb_control_msg(udev, (PIPE_CONTROL << 30) /* Address 0 */,
+ retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
- NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
- if (retval == 0)
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (retval == 0) {
usb_set_device_state(udev, USB_STATE_ADDRESS);
+ ep0_reinit(udev);
+ }
return retval;
}
* pointers, it's not necessary to lock the device.
*/
static int
-hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
+hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+ int retry_counter)
{
static DECLARE_MUTEX(usb_address0_sem);
+ struct usb_device *hdev = hub->hdev;
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
*/
if (!hdev->parent) {
delay = HUB_ROOT_RESET_TIME;
- if (port + 1 == hdev->bus->otg_port)
+ if (port1 == hdev->bus->otg_port)
hdev->bus->b_hnp_enable = 0;
}
down(&usb_address0_sem);
/* Reset the device; full speed may morph to high speed */
- retval = hub_port_reset(hdev, port, udev, delay);
+ retval = hub_port_reset(hub, port1, udev, delay);
if (retval < 0) /* error or disconnect */
goto fail;
/* success, speed is known */
dev_dbg(&udev->dev, "device reset changed speed!\n");
goto fail;
}
+ oldspeed = udev->speed;
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
*/
switch (udev->speed) {
case USB_SPEED_HIGH: /* fixed at 64 */
- i = 64;
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
- /* to determine the ep0 maxpacket size, read the first 8
- * bytes from the device descriptor to get bMaxPacketSize0;
- * then correct our initial (small) guess.
+ /* to determine the ep0 maxpacket size, try to read
+ * the device descriptor to get bMaxPacketSize0 and
+ * then correct our initial guess.
*/
- // FALLTHROUGH
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+ break;
case USB_SPEED_LOW: /* fixed at 8 */
- i = 8;
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
break;
default:
goto fail;
}
- udev->epmaxpacketin [0] = i;
- udev->epmaxpacketout[0] = i;
dev_info (&udev->dev,
- "%s %s speed USB device using address %d\n",
+ "%s %s speed USB device using %s and address %d\n",
(udev->config) ? "reset" : "new",
({ char *speed; switch (udev->speed) {
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_HIGH: speed = "high"; break;
default: speed = "?"; break;
}; speed;}),
+ udev->bus->controller->driver->name,
udev->devnum);
/* Set up TT records, if needed */
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {
- struct usb_hub *hub;
-
- hub = usb_get_intfdata(hdev->actconfig->interface[0]);
udev->tt = &hub->tt;
- udev->ttport = port + 1;
+ udev->ttport = port1;
}
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
* this area, and this is how Linux has done it for ages.
* Change it cautiously.
*
- * NOTE: Windows gets the descriptor first, seemingly to help
- * work around device bugs like "can't use addresses with bit 3
- * set in certain configurations". Yes, really.
+ * NOTE: If USE_NEW_SCHEME() is true we will start by issuing
+ * a 64-byte GET_DESCRIPTOR request. This is what Windows does,
+ * so it may help with some non-standards-compliant devices.
+ * Otherwise we start with SET_ADDRESS and then try to read the
+ * first 8 bytes of the device descriptor to get the ep0 maxpacket
+ * value.
*/
- for (i = 0; i < GET_DESCRIPTOR_TRIES; ++i) {
+ for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
+ if (USE_NEW_SCHEME(retry_counter)) {
+ struct usb_device_descriptor *buf;
+ int r = 0;
+
+#define GET_DESCRIPTOR_BUFSIZE 64
+ buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
+ if (!buf) {
+ retval = -ENOMEM;
+ continue;
+ }
+
+ /* Use a short timeout the first time through,
+ * so that recalcitrant full-speed devices with
+ * 8- or 16-byte ep0-maxpackets won't slow things
+ * down tremendously by NAKing the unexpectedly
+ * early status stage. Also, retry on all errors;
+ * some devices are flakey.
+ */
+ for (j = 0; j < 3; ++j) {
+ buf->bMaxPacketSize0 = 0;
+ r = usb_control_msg(udev, usb_rcvaddr0pipe(),
+ USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+ USB_DT_DEVICE << 8, 0,
+ buf, GET_DESCRIPTOR_BUFSIZE,
+ (i ? USB_CTRL_GET_TIMEOUT : 1000));
+ switch (buf->bMaxPacketSize0) {
+ case 8: case 16: case 32: case 64:
+ if (buf->bDescriptorType ==
+ USB_DT_DEVICE) {
+ r = 0;
+ break;
+ }
+ /* FALL THROUGH */
+ default:
+ if (r == 0)
+ r = -EPROTO;
+ break;
+ }
+ if (r == 0)
+ break;
+ }
+ udev->descriptor.bMaxPacketSize0 =
+ buf->bMaxPacketSize0;
+ kfree(buf);
+
+ retval = hub_port_reset(hub, port1, udev, delay);
+ if (retval < 0) /* error or disconnect */
+ goto fail;
+ if (oldspeed != udev->speed) {
+ dev_dbg(&udev->dev,
+ "device reset changed speed!\n");
+ retval = -ENODEV;
+ goto fail;
+ }
+ if (r) {
+ dev_err(&udev->dev, "device descriptor "
+ "read/%s, error %d\n",
+ "64", r);
+ retval = -EMSGSIZE;
+ continue;
+ }
+#undef GET_DESCRIPTOR_BUFSIZE
+ }
+
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev);
if (retval >= 0)
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
+ if (USE_NEW_SCHEME(retry_counter))
+ break;
+
retval = usb_get_device_descriptor(udev, 8);
- if (retval >= 8)
+ if (retval < 8) {
+ dev_err(&udev->dev, "device descriptor "
+ "read/%s, error %d\n",
+ "8", retval);
+ if (retval >= 0)
+ retval = -EMSGSIZE;
+ } else {
+ retval = 0;
break;
- msleep(100);
+ }
}
- if (retval != 8) {
- dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
- "8", retval);
- if (retval >= 0)
- retval = -EMSGSIZE;
+ if (retval)
goto fail;
- }
- if (udev->speed == USB_SPEED_FULL
- && (udev->epmaxpacketin [0]
- != udev->descriptor.bMaxPacketSize0)) {
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
- usb_endpoint_running(udev, 0, 1);
- usb_endpoint_running(udev, 0, 0);
- udev->epmaxpacketin [0] = udev->descriptor.bMaxPacketSize0;
- udev->epmaxpacketout[0] = udev->descriptor.bMaxPacketSize0;
+
+ i = udev->descriptor.bMaxPacketSize0;
+ if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
+ if (udev->speed != USB_SPEED_FULL ||
+ !(i == 8 || i == 16 || i == 32 || i == 64)) {
+ dev_err(&udev->dev, "ep0 maxpacket = %d\n", i);
+ retval = -EMSGSIZE;
+ goto fail;
+ }
+ dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
+ ep0_reinit(udev);
}
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
retval = 0;
fail:
+ if (retval)
+ hub_port_disable(hub, port1, 0);
up(&usb_address0_sem);
return retval;
}
static void
-check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port)
+check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
{
struct usb_qualifier_descriptor *qual;
int status;
qual = kmalloc (sizeof *qual, SLAB_KERNEL);
- if (qual == 0)
+ if (qual == NULL)
return;
status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
"connect to a high speed hub\n");
/* hub LEDs are probably harder to miss than syslog */
if (hub->has_indicators) {
- hub->indicator[port] = INDICATOR_GREEN_BLINK;
+ hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
schedule_work (&hub->leds);
}
}
- kfree (qual);
+ kfree(qual);
}
static unsigned
{
struct usb_device *hdev = hub->hdev;
int remaining;
- unsigned i;
+ int port1;
- remaining = hub->power_budget;
- if (!remaining) /* self-powered */
+ if (!hub->limited_power)
return 0;
- for (i = 0; i < hdev->maxchild; i++) {
- struct usb_device *udev = hdev->children[i];
- int delta, ceiling;
+ remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent;
+ for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+ struct usb_device *udev = hdev->children[port1 - 1];
+ int delta;
if (!udev)
continue;
- /* 100mA per-port ceiling, or 8mA for OTG ports */
- if (i != (udev->bus->otg_port - 1) || hdev->parent)
- ceiling = 50;
- else
- ceiling = 4;
-
+ /* Unconfigured devices may not use more than 100mA,
+ * or 8mA for OTG ports */
if (udev->actconfig)
- delta = udev->actconfig->desc.bMaxPower;
+ delta = udev->actconfig->desc.bMaxPower * 2;
+ else if (port1 != udev->bus->otg_port || hdev->parent)
+ delta = 100;
else
- delta = ceiling;
- // dev_dbg(&udev->dev, "budgeted %dmA\n", 2 * delta);
- if (delta > ceiling)
- dev_warn(&udev->dev, "%dmA over %dmA budget!\n",
- 2 * (delta - ceiling), 2 * ceiling);
+ delta = 8;
+ if (delta > hub->mA_per_port)
+ dev_warn(&udev->dev, "%dmA is over %umA budget "
+ "for port %d!\n",
+ delta, hub->mA_per_port, port1);
remaining -= delta;
}
if (remaining < 0) {
- dev_warn(&hub->intf->dev,
- "%dmA over power budget!\n",
- -2 * remaining);
+ dev_warn(hub->intfdev, "%dmA over power budget!\n",
+ - remaining);
remaining = 0;
}
return remaining;
* a port enable-change occurs (often caused by EMI);
* usb_reset_device() encounters changed descriptors (as from
* a firmware download)
+ * caller already locked the hub
*/
-static void hub_port_connect_change(struct usb_hub *hub, int port,
+static void hub_port_connect_change(struct usb_hub *hub, int port1,
u16 portstatus, u16 portchange)
{
struct usb_device *hdev = hub->hdev;
- struct device *hub_dev = &hub->intf->dev;
+ struct device *hub_dev = hub->intfdev;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
int status, i;
dev_dbg (hub_dev,
"port %d, status %04x, change %04x, %s\n",
- port + 1, portstatus, portchange, portspeed (portstatus));
+ port1, portstatus, portchange, portspeed (portstatus));
if (hub->has_indicators) {
- set_port_led(hdev, port + 1, HUB_LED_AUTO);
- hub->indicator[port] = INDICATOR_AUTO;
+ set_port_led(hub, port1, HUB_LED_AUTO);
+ hub->indicator[port1-1] = INDICATOR_AUTO;
}
/* Disconnect any existing devices under this port */
- if (hdev->children[port])
- usb_disconnect(&hdev->children[port]);
- clear_bit(port, hub->change_bits);
+ if (hdev->children[port1-1])
+ usb_disconnect(&hdev->children[port1-1]);
+ clear_bit(port1, hub->change_bits);
+
+#ifdef CONFIG_USB_OTG
+ /* during HNP, don't repeat the debounce */
+ if (hdev->bus->is_b_host)
+ portchange &= ~USB_PORT_STAT_C_CONNECTION;
+#endif
if (portchange & USB_PORT_STAT_C_CONNECTION) {
- status = hub_port_debounce(hdev, port);
+ status = hub_port_debounce(hub, port1);
if (status < 0) {
dev_err (hub_dev,
"connect-debounce failed, port %d disabled\n",
- port+1);
+ port1);
goto done;
}
portstatus = status;
if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
/* maybe switch power back on (e.g. root hub was reset) */
- if ((hub->descriptor->wHubCharacteristics
- & HUB_CHAR_LPSM) < 2
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
- set_port_feature(hdev, port + 1, USB_PORT_FEAT_POWER);
+ set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)
goto done;
return;
}
+#ifdef CONFIG_USB_SUSPEND
+ /* If something is connected, but the port is suspended, wake it up. */
+ if (portstatus & USB_PORT_STAT_SUSPEND) {
+ status = hub_port_resume(hub, port1, NULL);
+ if (status < 0) {
+ dev_dbg(hub_dev,
+ "can't clear suspend on port %d; %d\n",
+ port1, status);
+ goto done;
+ }
+ }
+#endif
+
for (i = 0; i < SET_CONFIG_TRIES; i++) {
struct usb_device *udev;
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
*/
- udev = usb_alloc_dev(hdev, hdev->bus, port);
+ udev = usb_alloc_dev(hdev, hdev->bus, port1);
if (!udev) {
dev_err (hub_dev,
- "couldn't allocate port %d usb_device\n", port+1);
+ "couldn't allocate port %d usb_device\n",
+ port1);
goto done;
}
usb_set_device_state(udev, USB_STATE_POWERED);
udev->speed = USB_SPEED_UNKNOWN;
-
+ udev->bus_mA = hub->mA_per_port;
+
/* set the address */
choose_address(udev);
if (udev->devnum <= 0) {
}
/* reset and get descriptor */
- status = hub_port_init(hdev, udev, port);
+ status = hub_port_init(hub, udev, port1, i);
if (status < 0)
goto loop;
* on the parent.
*/
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB
- && hub->power_budget) {
+ && udev->bus_mA <= 100) {
u16 devstat;
status = usb_get_status(udev, USB_RECIP_DEVICE, 0,
&devstat);
- if (status < 0) {
+ if (status < 2) {
dev_dbg(&udev->dev, "get status %d ?\n", status);
- goto loop;
+ goto loop_disable;
}
- cpu_to_le16s(&devstat);
+ le16_to_cpus(&devstat);
if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
dev_err(&udev->dev,
"can't connect bus-powered hub "
"to this port\n");
if (hub->has_indicators) {
- hub->indicator[port] =
+ hub->indicator[port1-1] =
INDICATOR_AMBER_BLINK;
schedule_work (&hub->leds);
}
status = -ENOTCONN; /* Don't retry */
- goto loop;
+ goto loop_disable;
}
}
/* check for devices running slower than they could */
- if (udev->descriptor.bcdUSB >= 0x0200
+ if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
&& udev->speed == USB_SPEED_FULL
&& highspeed_hubs != 0)
- check_highspeed (hub, udev, port);
+ check_highspeed (hub, udev, port1);
/* Store the parent's children[] pointer. At this point
* udev becomes globally accessible, although presumably
* no one will look at it until hdev is unlocked.
*/
- down (&udev->serialize);
status = 0;
/* We mustn't add new devices if the parent hub has
if (hdev->state == USB_STATE_NOTATTACHED)
status = -ENOTCONN;
else
- hdev->children[port] = udev;
+ hdev->children[port1-1] = udev;
spin_unlock_irq(&device_state_lock);
/* Run it through the hoops (find a driver, etc) */
status = usb_new_device(udev);
if (status) {
spin_lock_irq(&device_state_lock);
- hdev->children[port] = NULL;
+ hdev->children[port1-1] = NULL;
spin_unlock_irq(&device_state_lock);
}
}
- up (&udev->serialize);
if (status)
- goto loop;
+ goto loop_disable;
status = hub_power_remaining(hub);
if (status)
- dev_dbg(hub_dev,
- "%dmA power budget left\n",
- 2 * status);
+ dev_dbg(hub_dev, "%dmA power budget left\n", status);
return;
+loop_disable:
+ hub_port_disable(hub, port1, 1);
loop:
- hub_port_disable(hdev, port);
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ ep0_reinit(udev);
release_address(udev);
usb_put_dev(udev);
if (status == -ENOTCONN)
}
done:
- hub_port_disable(hdev, port);
+ hub_port_disable(hub, port1, 1);
}
static void hub_events(void)
{
struct list_head *tmp;
struct usb_device *hdev;
+ struct usb_interface *intf;
struct usb_hub *hub;
struct device *hub_dev;
u16 hubstatus;
hub = list_entry(tmp, struct usb_hub, event_list);
hdev = hub->hdev;
- hub_dev = &hub->intf->dev;
+ intf = to_usb_interface(hub->intfdev);
+ hub_dev = &intf->dev;
+
+ i = hub->resume_root_hub;
- usb_get_dev(hdev);
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
+ hdev->state, hub->descriptor
+ ? hub->descriptor->bNbrPorts
+ : 0,
+ /* NOTE: expects max 15 ports... */
+ (u16) hub->change_bits[0],
+ (u16) hub->event_bits[0],
+ i ? ", resume root" : "");
+
+ usb_get_intf(intf);
spin_unlock_irq(&hub_event_lock);
+ /* Is this is a root hub wanting to reactivate the downstream
+ * ports? If so, be sure the interface resumes even if its
+ * stub "device" node was never suspended.
+ */
+ if (i) {
+ dpm_runtime_resume(&hdev->dev);
+ dpm_runtime_resume(&intf->dev);
+ usb_put_intf(intf);
+ continue;
+ }
+
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
- down(&hdev->serialize);
- if (hdev->state != USB_STATE_CONFIGURED ||
- !hdev->actconfig ||
- hub != usb_get_intfdata(
- hdev->actconfig->interface[0]))
+ if (locktree(hdev) < 0) {
+ usb_put_intf(intf);
+ continue;
+ }
+ if (hub != usb_get_intfdata(intf))
+ goto loop;
+
+ /* If the hub has died, clean up after it */
+ if (hdev->state == USB_STATE_NOTATTACHED) {
+ hub_pre_reset(hub, 0);
+ goto loop;
+ }
+
+ /* If this is an inactive or suspended hub, do nothing */
+ if (hub->quiescing)
goto loop;
if (hub->error) {
dev_dbg (hub_dev, "resetting for error %d\n",
hub->error);
- if (hub_reset(hub)) {
+ ret = usb_reset_device(hdev);
+ if (ret) {
dev_dbg (hub_dev,
- "can't reset; disconnecting\n");
- hub_start_disconnect(hdev);
+ "error resetting hub: %d\n", ret);
goto loop;
}
}
/* deal with port status changes */
- for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
+ for (i = 1; i <= hub->descriptor->bNbrPorts; i++) {
+ if (test_bit(i, hub->busy_bits))
+ continue;
connect_change = test_bit(i, hub->change_bits);
- if (!test_and_clear_bit(i+1, hub->event_bits) &&
- !connect_change)
+ if (!test_and_clear_bit(i, hub->event_bits) &&
+ !connect_change && !hub->activating)
continue;
- ret = hub_port_status(hdev, i,
+ ret = hub_port_status(hub, i,
&portstatus, &portchange);
if (ret < 0)
continue;
+ if (hub->activating && !hdev->children[i-1] &&
+ (portstatus &
+ USB_PORT_STAT_CONNECTION))
+ connect_change = 1;
+
if (portchange & USB_PORT_STAT_C_CONNECTION) {
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_CONNECTION);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_CONNECTION);
connect_change = 1;
}
dev_dbg (hub_dev,
"port %d enable change, "
"status %08x\n",
- i + 1, portstatus);
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_ENABLE);
+ i, portstatus);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_ENABLE);
/*
* EM interference sometimes causes badly
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
&& !connect_change
- && hdev->children[i]) {
+ && hdev->children[i-1]) {
dev_err (hub_dev,
"port %i "
"disabled by hub (EMI?), "
"re-enabling...\n",
- i + 1);
+ i);
connect_change = 1;
}
}
if (portchange & USB_PORT_STAT_C_SUSPEND) {
- clear_port_feature(hdev, i + 1,
+ clear_port_feature(hdev, i,
USB_PORT_FEAT_C_SUSPEND);
- if (hdev->children[i])
- ret = remote_wakeup(hdev->children[i]);
- else
+ if (hdev->children[i-1]) {
+ ret = remote_wakeup(hdev->
+ children[i-1]);
+ if (ret < 0)
+ connect_change = 1;
+ } else {
ret = -ENODEV;
+ hub_port_disable(hub, i, 1);
+ }
dev_dbg (hub_dev,
"resume on port %d, status %d\n",
- i + 1, ret);
- if (ret < 0)
- ret = hub_port_disable(hdev, i);
+ i, ret);
}
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
dev_err (hub_dev,
"over-current change on port %d\n",
- i + 1);
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_OVER_CURRENT);
+ i);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_OVER_CURRENT);
hub_power_on(hub);
}
if (portchange & USB_PORT_STAT_C_RESET) {
dev_dbg (hub_dev,
"reset change on port %d\n",
- i + 1);
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_RESET);
+ i);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_RESET);
}
if (connect_change)
if (hubchange & HUB_CHANGE_LOCAL_POWER) {
dev_dbg (hub_dev, "power change\n");
clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
+ if (hubstatus & HUB_STATUS_LOCAL_POWER)
+ /* FIXME: Is this always true? */
+ hub->limited_power = 0;
+ else
+ hub->limited_power = 1;
}
if (hubchange & HUB_CHANGE_OVERCURRENT) {
dev_dbg (hub_dev, "overcurrent change\n");
}
}
+ hub->activating = 0;
+
+ /* If this is a root hub, tell the HCD it's okay to
+ * re-enable port-change interrupts now. */
+ if (!hdev->parent)
+ usb_enable_root_hub_irq(hdev->bus);
+
loop:
- up(&hdev->serialize);
- usb_put_dev(hdev);
+ usb_unlock_device(hdev);
+ usb_put_intf(intf);
} /* end while (1) */
}
static int hub_thread(void *__unused)
{
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources
- */
-
- daemonize("khubd");
- allow_signal(SIGKILL);
-
- /* Send me a signal to get me die (for debugging) */
do {
hub_events();
- wait_event_interruptible(khubd_wait, !list_empty(&hub_event_list));
- if (current->flags & PF_FREEZE)
- refrigerator(PF_FREEZE);
- } while (!signal_pending(current));
+ wait_event_interruptible(khubd_wait,
+ !list_empty(&hub_event_list) ||
+ kthread_should_stop());
+ try_to_freeze();
+ } while (!kthread_should_stop() || !list_empty(&hub_event_list));
- pr_debug ("%s: khubd exiting\n", usbcore_name);
- complete_and_exit(&khubd_exited, 0);
+ pr_debug("%s: khubd exiting\n", usbcore_name);
+ return 0;
}
static struct usb_device_id hub_id_table [] = {
MODULE_DEVICE_TABLE (usb, hub_id_table);
static struct usb_driver hub_driver = {
- .owner = THIS_MODULE,
.name = "hub",
.probe = hub_probe,
.disconnect = hub_disconnect,
int usb_hub_init(void)
{
- pid_t pid;
-
if (usb_register(&hub_driver) < 0) {
printk(KERN_ERR "%s: can't register hub driver\n",
usbcore_name);
return -1;
}
- pid = kernel_thread(hub_thread, NULL, CLONE_KERNEL);
- if (pid >= 0) {
- khubd_pid = pid;
-
+ khubd_task = kthread_run(hub_thread, NULL, "khubd");
+ if (!IS_ERR(khubd_task))
return 0;
- }
/* Fall through if kernel_thread failed */
usb_deregister(&hub_driver);
void usb_hub_cleanup(void)
{
- int ret;
-
- /* Kill the thread */
- ret = kill_proc(khubd_pid, SIGKILL, 1);
-
- wait_for_completion(&khubd_exited);
+ kthread_stop(khubd_task);
/*
* Hub resources are freed for us by usb_deregister. It calls
usb_deregister(&hub_driver);
} /* usb_hub_cleanup() */
-
static int config_descriptors_changed(struct usb_device *udev)
{
unsigned index;
struct usb_config_descriptor *buf;
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
- if (len < udev->config[index].desc.wTotalLength)
- len = udev->config[index].desc.wTotalLength;
+ if (len < le16_to_cpu(udev->config[index].desc.wTotalLength))
+ len = le16_to_cpu(udev->config[index].desc.wTotalLength);
}
buf = kmalloc (len, SLAB_KERNEL);
- if (buf == 0) {
+ if (buf == NULL) {
dev_err(&udev->dev, "no mem to re-read configs after reset\n");
/* assume the worst */
return 1;
}
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
int length;
- int old_length = udev->config[index].desc.wTotalLength;
+ int old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf,
old_length);
}
/**
- * usb_reset_devce - perform a USB port reset to reinitialize a device
+ * usb_reset_device - perform a USB port reset to reinitialize a device
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
*
* WARNING - don't reset any device unless drivers for all of its
*
* The caller must own the device lock. For example, it's safe to use
* this from a driver probe() routine after downloading new firmware.
+ * For calls that might not occur during probe(), drivers should lock
+ * the device using usb_lock_device_for_reset().
*/
-int __usb_reset_device(struct usb_device *udev)
+int usb_reset_device(struct usb_device *udev)
{
- struct usb_device *parent = udev->parent;
- struct usb_device_descriptor descriptor = udev->descriptor;
- int i, ret, port = -1;
- struct usb_hub *hub;
+ struct usb_device *parent_hdev = udev->parent;
+ struct usb_hub *parent_hub;
+ struct usb_device_descriptor descriptor = udev->descriptor;
+ struct usb_hub *hub = NULL;
+ int i, ret = 0;
+ int port1 = udev->portnum;
if (udev->state == USB_STATE_NOTATTACHED ||
udev->state == USB_STATE_SUSPENDED) {
return -EINVAL;
}
- /* FIXME: This should be legal for regular hubs. Root hubs may
- * have special requirements. */
- if (udev->maxchild) {
- /* this requires hub- or hcd-specific logic;
- * see hub_reset() and OHCI hc_restart()
- */
- dev_dbg(&udev->dev, "%s for hub!\n", __FUNCTION__);
+ if (!parent_hdev) {
+ /* this requires hcd-specific logic; see OHCI hc_restart() */
+ dev_dbg(&udev->dev, "%s for root hub!\n", __FUNCTION__);
return -EISDIR;
}
+ parent_hub = hdev_to_hub(parent_hdev);
- for (i = 0; i < parent->maxchild; i++)
- if (parent->children[i] == udev) {
- port = i;
- break;
- }
-
- if (port < 0) {
- /* If this ever happens, it's very bad */
- dev_err(&udev->dev, "Can't locate device's port!\n");
- return -ENOENT;
+ /* If we're resetting an active hub, take some special actions */
+ if (udev->actconfig &&
+ udev->actconfig->interface[0]->dev.driver ==
+ &hub_driver.driver &&
+ (hub = hdev_to_hub(udev)) != NULL) {
+ hub_pre_reset(hub, 0);
}
- ret = hub_port_init(parent, udev, port);
+ set_bit(port1, parent_hub->busy_bits);
+ for (i = 0; i < SET_CONFIG_TRIES; ++i) {
+
+ /* ep0 maxpacket size may change; let the HCD know about it.
+ * Other endpoints will be handled by re-enumeration. */
+ ep0_reinit(udev);
+ ret = hub_port_init(parent_hub, udev, port1, i);
+ if (ret >= 0)
+ break;
+ }
+ clear_bit(port1, parent_hub->busy_bits);
if (ret < 0)
goto re_enumerate;
}
if (!udev->actconfig)
- return 0;
+ goto done;
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_CONFIGURATION, 0,
udev->actconfig->desc.bConfigurationValue, 0,
- NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
if (ret < 0) {
dev_err(&udev->dev,
"can't restore configuration #%d (error=%d)\n",
struct usb_interface *intf = udev->actconfig->interface[i];
struct usb_interface_descriptor *desc;
- /* set_interface resets host side toggle and halt status even
+ /* set_interface resets host side toggle even
* for altsetting zero. the interface may have no driver.
*/
desc = &intf->cur_altsetting->desc;
}
}
+done:
+ if (hub)
+ hub_post_reset(hub);
return 0;
re_enumerate:
- hub_port_disable(parent, port);
-
- hub = usb_get_intfdata(parent->actconfig->interface[0]);
- set_bit(port, hub->change_bits);
-
- spin_lock_irq(&hub_event_lock);
- if (list_empty(&hub->event_list)) {
- list_add_tail(&hub->event_list, &hub_event_list);
- wake_up(&khubd_wait);
- }
- spin_unlock_irq(&hub_event_lock);
-
+ hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
}
-EXPORT_SYMBOL(__usb_reset_device);
-
-int usb_reset_device(struct usb_device *udev)
-{
- int r;
-
- down(&udev->serialize);
- r = __usb_reset_device(udev);
- up(&udev->serialize);
-
- return r;
-}