#include <linux/ioctl.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
-#include <linux/suspend.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
#include "hcd.h"
#include "hub.h"
-/* Protect all struct usb_device state members */
-static spinlock_t device_state_lock = SPIN_LOCK_UNLOCKED;
-
-/* Wakes up khubd */
-static spinlock_t hub_event_lock = SPIN_LOCK_UNLOCKED;
+/* Protect struct usb_device->state and ->children members
+ * Note: Both are also protected by ->serialize, except that ->state can
+ * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
+static DEFINE_SPINLOCK(device_state_lock);
+/* khubd's worklist and its lock */
+static DEFINE_SPINLOCK(hub_event_lock);
static LIST_HEAD(hub_event_list); /* List of hubs needing servicing */
+/* Wakes up khubd */
static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);
+
static pid_t khubd_pid = 0; /* PID of khubd */
static DECLARE_COMPLETION(khubd_exited);
module_param (blinkenlights, bool, S_IRUGO);
MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
+/*
+ * As of 2.6.10 we introduce a new USB device initialization scheme which
+ * closely resembles the way Windows works. Hopefully it will be compatible
+ * with a wider range of devices than the old scheme. However some previously
+ * working devices may start giving rise to "device not accepting address"
+ * errors; if that happens the user can try the old scheme by adjusting the
+ * following module parameters.
+ *
+ * For maximum flexibility there are two boolean parameters to control the
+ * hub driver's behavior. On the first initialization attempt, if the
+ * "old_scheme_first" parameter is set then the old scheme will be used,
+ * otherwise the new scheme is used. If that fails and "use_both_schemes"
+ * is set, then the driver will make another attempt, using the other scheme.
+ */
+static int old_scheme_first = 0;
+module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(old_scheme_first,
+ "start with the old device initialization scheme");
+
+static int use_both_schemes = 0;
+module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(use_both_schemes,
+ "try the other device initialization scheme if the "
+ "first one fails");
+
#ifdef DEBUG
static inline char *portspeed (int portstatus)
}
#endif
-/* for dev_info, dev_dbg, etc */
-static inline struct device *hubdev (struct usb_device *hdev)
+/* Note that hdev or one of its children must be locked! */
+static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
{
- return &hdev->actconfig->interface[0]->dev;
+ return usb_get_intfdata(hdev->actconfig->interface[0]);
}
/* USB 2.0 spec Section 11.24.4.5 */
static int get_hub_descriptor(struct usb_device *hdev, void *data, int size)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
- USB_DT_HUB << 8, 0, data, size, HZ * USB_CTRL_GET_TIMEOUT);
+ int i, ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
+ USB_DT_HUB << 8, 0, data, size,
+ HZ * USB_CTRL_GET_TIMEOUT);
+ if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
+ return ret;
+ }
+ return -EINVAL;
}
/*
/*
* USB 2.0 spec Section 11.24.2.2
*/
-static int clear_port_feature(struct usb_device *hdev, int port, int feature)
+static int clear_port_feature(struct usb_device *hdev, int port1, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port, NULL, 0, HZ);
+ USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
+ NULL, 0, HZ);
}
/*
* USB 2.0 spec Section 11.24.2.13
*/
-static int set_port_feature(struct usb_device *hdev, int port, int feature)
+static int set_port_feature(struct usb_device *hdev, int port1, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port, NULL, 0, HZ);
+ USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
+ NULL, 0, HZ);
}
/*
* for info about using port indicators
*/
static void set_port_led(
- struct usb_device *hdev,
- int port,
+ struct usb_hub *hub,
+ int port1,
int selector
)
{
- int status = set_port_feature(hdev, (selector << 8) | port,
+ int status = set_port_feature(hub->hdev, (selector << 8) | port1,
USB_PORT_FEAT_INDICATOR);
if (status < 0)
- dev_dbg (hubdev (hdev),
+ dev_dbg (hub->intfdev,
"port %d indicator %s status %d\n",
- port,
+ port1,
({ char *s; switch (selector) {
case HUB_LED_AMBER: s = "amber"; break;
case HUB_LED_GREEN: s = "green"; break;
unsigned changed = 0;
int cursor = -1;
- if (hdev->state != USB_STATE_CONFIGURED)
+ if (hdev->state != USB_STATE_CONFIGURED || hub->quiescing)
return;
for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
}
if (selector != HUB_LED_AUTO)
changed = 1;
- set_port_led(hdev, i + 1, selector);
+ set_port_led(hub, i + 1, selector);
hub->indicator[i] = mode;
}
if (!changed && blinkenlights) {
cursor++;
cursor %= hub->descriptor->bNbrPorts;
- set_port_led(hdev, cursor + 1, HUB_LED_GREEN);
+ set_port_led(hub, cursor + 1, HUB_LED_GREEN);
hub->indicator[cursor] = INDICATOR_CYCLE;
changed++;
}
schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
}
+/* use a short timeout for hub/port status fetches */
+#define USB_STS_TIMEOUT 1
+#define USB_STS_RETRIES 5
+
/*
* USB 2.0 spec Section 11.24.2.6
*/
static int get_hub_status(struct usb_device *hdev,
struct usb_hub_status *data)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
- data, sizeof(*data), HZ * USB_CTRL_GET_TIMEOUT);
+ int i, status = -ETIMEDOUT;
+
+ for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
+ data, sizeof(*data), HZ * USB_STS_TIMEOUT);
+ }
+ return status;
}
/*
* USB 2.0 spec Section 11.24.2.7
*/
-static int get_port_status(struct usb_device *hdev, int port,
+static int get_port_status(struct usb_device *hdev, int port1,
struct usb_port_status *data)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
- data, sizeof(*data), HZ * USB_CTRL_GET_TIMEOUT);
+ int i, status = -ETIMEDOUT;
+
+ for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
+ data, sizeof(*data), HZ * USB_STS_TIMEOUT);
+ }
+ return status;
}
+static void kick_khubd(struct usb_hub *hub)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hub_event_lock, flags);
+ if (list_empty(&hub->event_list)) {
+ list_add_tail(&hub->event_list, &hub_event_list);
+ wake_up(&khubd_wait);
+ }
+ spin_unlock_irqrestore(&hub_event_lock, flags);
+}
+
+
/* completion function, fires on port status changes and various faults */
static void hub_irq(struct urb *urb, struct pt_regs *regs)
{
default: /* presumably an error */
/* Cause a hub reset after 10 consecutive errors */
- dev_dbg (&hub->intf->dev, "transfer --> %d\n", urb->status);
+ dev_dbg (hub->intfdev, "transfer --> %d\n", urb->status);
if ((++hub->nerrors < 10) || hub->error)
goto resubmit;
hub->error = urb->status;
hub->nerrors = 0;
/* Something happened, let khubd figure it out */
- spin_lock(&hub_event_lock);
- if (list_empty(&hub->event_list)) {
- list_add_tail(&hub->event_list, &hub_event_list);
- wake_up(&khubd_wait);
- }
- spin_unlock(&hub_event_lock);
+ kick_khubd(hub);
resubmit:
+ if (hub->quiescing)
+ return;
+
if ((status = usb_submit_urb (hub->urb, GFP_ATOMIC)) != 0
&& status != -ENODEV && status != -EPERM)
- dev_err (&hub->intf->dev, "resubmit --> %d\n", status);
+ dev_err (hub->intfdev, "resubmit --> %d\n", status);
}
/* USB 2.0 spec Section 11.24.2.3 */
* since each TT has "at least two" buffers that can need it (and
* there can be many TTs per hub). even if they're uncommon.
*/
- if ((clear = kmalloc (sizeof *clear, SLAB_ATOMIC)) == 0) {
+ if ((clear = kmalloc (sizeof *clear, SLAB_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
return;
static void hub_power_on(struct usb_hub *hub)
{
- int i;
+ int port1;
/* if hub supports power switching, enable power on each port */
if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
- dev_dbg(&hub->intf->dev, "enabling power on all ports\n");
- for (i = 0; i < hub->descriptor->bNbrPorts; i++)
- set_port_feature(hub->hdev, i + 1,
+ dev_dbg(hub->intfdev, "enabling power on all ports\n");
+ for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
+ set_port_feature(hub->hdev, port1,
USB_PORT_FEAT_POWER);
}
msleep(hub->descriptor->bPwrOn2PwrGood * 2);
}
+static void hub_quiesce(struct usb_hub *hub)
+{
+ /* stop khubd and related activity */
+ hub->quiescing = 1;
+ usb_kill_urb(hub->urb);
+ if (hub->has_indicators)
+ cancel_delayed_work(&hub->leds);
+ if (hub->has_indicators || hub->tt.hub)
+ flush_scheduled_work();
+}
+
+static void hub_activate(struct usb_hub *hub)
+{
+ int status;
+
+ hub->quiescing = 0;
+ status = usb_submit_urb(hub->urb, GFP_NOIO);
+ if (status < 0)
+ dev_err(hub->intfdev, "activate --> %d\n", status);
+ if (hub->has_indicators && blinkenlights)
+ schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+
+ /* scan all ports ASAP */
+ hub->event_bits[0] = (1UL << (hub->descriptor->bNbrPorts + 1)) - 1;
+ kick_khubd(hub);
+}
+
static int hub_hub_status(struct usb_hub *hub,
u16 *status, u16 *change)
{
ret = get_hub_status(hub->hdev, &hub->status->hub);
if (ret < 0)
- dev_err (&hub->intf->dev,
+ dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
else {
*status = le16_to_cpu(hub->status->hub.wHubStatus);
struct usb_endpoint_descriptor *endpoint)
{
struct usb_device *hdev = hub->hdev;
- struct device *hub_dev = &hub->intf->dev;
+ struct device *hub_dev = hub->intfdev;
u16 hubstatus, hubchange;
unsigned int pipe;
int maxp, ret;
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
- /* Start the interrupt endpoint */
+ /* set up the interrupt endpoint */
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
hub, endpoint->bInterval);
hub->urb->transfer_dma = hub->buffer_dma;
hub->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- ret = usb_submit_urb(hub->urb, GFP_KERNEL);
- if (ret) {
- message = "couldn't submit status urb";
- goto fail;
- }
- /* Wake up khubd */
- wake_up(&khubd_wait);
-
- /* maybe start cycling the hub leds */
- if (hub->has_indicators && blinkenlights) {
- set_port_led(hdev, 1, HUB_LED_GREEN);
+ /* maybe cycle the hub leds */
+ if (hub->has_indicators && blinkenlights)
hub->indicator [0] = INDICATOR_CYCLE;
- schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
- }
hub_power_on(hub);
-
+ hub->change_bits[0] = (1UL << (hub->descriptor->bNbrPorts + 1)) - 2;
+ hub_activate(hub);
return 0;
fail:
usb_set_intfdata (intf, NULL);
- if (hub->urb) {
- usb_kill_urb(hub->urb);
- usb_free_urb(hub->urb);
- hub->urb = NULL;
- }
+ hub_quiesce(hub);
+ usb_free_urb(hub->urb);
+ hub->urb = NULL;
spin_lock_irq(&hub_event_lock);
list_del_init(&hub->event_list);
spin_unlock_irq(&hub_event_lock);
- /* assuming we used keventd, it must quiesce too */
- if (hub->has_indicators)
- cancel_delayed_work (&hub->leds);
- if (hub->has_indicators || hub->tt.hub)
- flush_scheduled_work ();
-
if (hub->descriptor) {
kfree(hub->descriptor);
hub->descriptor = NULL;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *hdev;
struct usb_hub *hub;
- struct device *hub_dev;
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
- hub_dev = &intf->dev;
/* Some hubs have a subclass of 1, which AFAICT according to the */
/* specs is not defined, but it works */
if ((desc->desc.bInterfaceSubClass != 0) &&
(desc->desc.bInterfaceSubClass != 1)) {
descriptor_error:
- dev_err (hub_dev, "bad descriptor, ignoring hub\n");
+ dev_err (&intf->dev, "bad descriptor, ignoring hub\n");
return -EIO;
}
goto descriptor_error;
/* We found a hub */
- dev_info (hub_dev, "USB hub found\n");
+ dev_info (&intf->dev, "USB hub found\n");
hub = kmalloc(sizeof(*hub), GFP_KERNEL);
if (!hub) {
- dev_dbg (hub_dev, "couldn't kmalloc hub struct\n");
+ dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
return -ENOMEM;
}
memset(hub, 0, sizeof(*hub));
INIT_LIST_HEAD(&hub->event_list);
- hub->intf = intf;
+ hub->intfdev = &intf->dev;
hub->hdev = hdev;
INIT_WORK(&hub->leds, led_work, hub);
switch (code) {
case USBDEVFS_HUB_PORTINFO: {
struct usbdevfs_hub_portinfo *info = user_data;
- unsigned long flags;
int i;
- spin_lock_irqsave(&hub_event_lock, flags);
+ spin_lock_irq(&device_state_lock);
if (hdev->devnum <= 0)
info->nports = 0;
else {
hdev->children[i]->devnum;
}
}
- spin_unlock_irqrestore(&hub_event_lock, flags);
+ spin_unlock_irq(&device_state_lock);
return info->nports + 1;
}
}
}
-static int hub_reset(struct usb_hub *hub)
+/* caller has locked the hub device */
+static void hub_pre_reset(struct usb_hub *hub)
{
struct usb_device *hdev = hub->hdev;
int i;
- /* Disconnect any attached devices */
- for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
+ for (i = 0; i < hdev->maxchild; ++i) {
if (hdev->children[i])
usb_disconnect(&hdev->children[i]);
}
+ hub_quiesce(hub);
+}
- /* Attempt to reset the hub */
- if (hub->urb)
- usb_kill_urb(hub->urb);
- else
- return -1;
+/* caller has locked the hub device */
+static void hub_post_reset(struct usb_hub *hub)
+{
+ hub_activate(hub);
+ hub_power_on(hub);
+}
- if (usb_reset_device(hdev))
- return -1;
- hub->urb->dev = hdev;
- if (usb_submit_urb(hub->urb, GFP_KERNEL))
- return -1;
+/* grab device/port lock, returning index of that port (zero based).
+ * protects the upstream link used by this device from concurrent
+ * tree operations like suspend, resume, reset, and disconnect, which
+ * apply to everything downstream of a given port.
+ */
+static int locktree(struct usb_device *udev)
+{
+ int t;
+ struct usb_device *hdev;
- hub_power_on(hub);
+ if (!udev)
+ return -ENODEV;
- return 0;
-}
+ /* root hub is always the first lock in the series */
+ hdev = udev->parent;
+ if (!hdev) {
+ usb_lock_device(udev);
+ return 0;
+ }
-/* FIXME! This routine should be subsumed into hub_reset */
-static void hub_start_disconnect(struct usb_device *hdev)
-{
- struct usb_device *parent = hdev->parent;
- int i;
+ /* on the path from root to us, lock everything from
+ * top down, dropping parent locks when not needed
+ */
+ t = locktree(hdev);
+ if (t < 0)
+ return t;
+ for (t = 0; t < hdev->maxchild; t++) {
+ if (hdev->children[t] == udev) {
+ /* everything is fail-fast once disconnect
+ * processing starts
+ */
+ if (udev->state == USB_STATE_NOTATTACHED)
+ break;
- /* Find the device pointer to disconnect */
- if (parent) {
- for (i = 0; i < parent->maxchild; i++) {
- if (parent->children[i] == hdev) {
- usb_disconnect(&parent->children[i]);
- return;
- }
+ /* when everyone grabs locks top->bottom,
+ * non-overlapping work may be concurrent
+ */
+ down(&udev->serialize);
+ up(&hdev->serialize);
+ return t + 1;
}
}
-
- dev_err(&hdev->dev, "cannot disconnect hub!\n");
+ usb_unlock_device(hdev);
+ return -ENODEV;
}
-
static void recursively_mark_NOTATTACHED(struct usb_device *udev)
{
int i;
}
/**
- * usb_set_device_state - change a device's current state (usbcore-internal)
+ * usb_set_device_state - change a device's current state (usbcore, hcds)
* @udev: pointer to device whose state should be changed
* @new_state: new state value to be stored
*
- * udev->state is _not_ protected by the udev->serialize semaphore. This
+ * udev->state is _not_ fully protected by the device lock. Although
+ * most transitions are made only while holding the lock, the state can
+ * can change to USB_STATE_NOTATTACHED at almost any time. This
* is so that devices can be marked as disconnected as soon as possible,
- * without having to wait for the semaphore to be released. Instead,
- * changes to the state must be protected by the device_state_lock spinlock.
+ * without having to wait for any semaphores to be released. As a result,
+ * all changes to any device's state must be protected by the
+ * device_state_lock spinlock.
*
* Once a device has been added to the device tree, all changes to its state
* should be made using this routine. The state should _not_ be set directly.
*
* If udev->state is already USB_STATE_NOTATTACHED then no change is made.
* Otherwise udev->state is set to new_state, and if new_state is
- * USB_STATE_NOTATTACHED then all of udev's descendant's states are also set
+ * USB_STATE_NOTATTACHED then all of udev's descendants' states are also set
* to USB_STATE_NOTATTACHED.
*/
void usb_set_device_state(struct usb_device *udev,
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
+EXPORT_SYMBOL(usb_set_device_state);
static void choose_address(struct usb_device *udev)
* @pdev: pointer to device being disconnected
* Context: !in_interrupt ()
*
- * Something got disconnected. Get rid of it, and all of its children.
- * If *pdev is a normal device then the parent hub should be locked.
+ * Something got disconnected. Get rid of it and all of its children.
+ *
+ * If *pdev is a normal device then the parent hub must already be locked.
* If *pdev is a root hub then this routine will acquire the
* usb_bus_list_lock on behalf of the caller.
*
}
/* mark the device as inactive, so any further urb submissions for
- * this device will fail.
+ * this device (and any of its children) will fail immediately.
+ * this quiesces everyting except pending urbs.
*/
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
/* lock the bus list on behalf of HCDs unregistering their root hubs */
- if (!udev->parent)
+ if (!udev->parent) {
down(&usb_bus_list_lock);
- down(&udev->serialize);
+ usb_lock_device(udev);
+ } else
+ down(&udev->serialize);
dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
/* deallocate hcd/hardware state ... nuking all pending urbs and
* cleaning up all state associated with the current configuration
+ * so that the hardware is now fully quiesced.
*/
usb_disable_device(udev, 0);
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
- up(&udev->serialize);
- if (!udev->parent)
+ if (!udev->parent) {
+ usb_unlock_device(udev);
up(&usb_bus_list_lock);
+ } else
+ up(&udev->serialize);
device_unregister(&udev->dev);
}
->altsetting->desc;
if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
continue;
- /* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS */
+ /* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS.
+ * MSFT needs this to be the first config; never use
+ * it as the default unless Linux has host-side RNDIS.
+ * A second config would ideally be CDC-Ethernet, but
+ * may instead be the "vendor specific" CDC subset
+ * long used by ARM Linux for sa1100 or pxa255.
+ */
if (desc->bInterfaceClass == USB_CLASS_COMM
&& desc->bInterfaceSubClass == 2
- && desc->bInterfaceProtocol == 0xff)
+ && desc->bInterfaceProtocol == 0xff) {
+ c = udev->config[1].desc.bConfigurationValue;
continue;
+ }
c = udev->config[i].desc.bConfigurationValue;
break;
}
{}
#endif
+#ifdef CONFIG_USB_OTG
+#include "otg_whitelist.h"
+#endif
+
/**
* usb_new_device - perform initial device setup (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
show_string(udev, "SerialNumber",
udev->descriptor.iSerialNumber);
+#ifdef CONFIG_USB_OTG
+ /*
+ * OTG-aware devices on OTG-capable root hubs may be able to use SRP,
+ * to wake us after we've powered off VBUS; and HNP, switching roles
+ * "host" to "peripheral". The OTG descriptor helps figure this out.
+ */
+ if (!udev->bus->is_b_host
+ && udev->config
+ && udev->parent == udev->bus->root_hub) {
+ struct usb_otg_descriptor *desc = 0;
+ struct usb_bus *bus = udev->bus;
+
+ /* descriptor may appear anywhere in config */
+ if (__usb_get_extra_descriptor (udev->rawdescriptors[0],
+ le16_to_cpu(udev->config[0].desc.wTotalLength),
+ USB_DT_OTG, (void **) &desc) == 0) {
+ if (desc->bmAttributes & USB_OTG_HNP) {
+ unsigned port1;
+ struct usb_device *root = udev->parent;
+
+ for (port1 = 1; port1 <= root->maxchild;
+ port1++) {
+ if (root->children[port1-1] == udev)
+ break;
+ }
+
+ dev_info(&udev->dev,
+ "Dual-Role OTG device on %sHNP port\n",
+ (port1 == bus->otg_port)
+ ? "" : "non-");
+
+ /* enable HNP before suspend, it's simpler */
+ if (port1 == bus->otg_port)
+ bus->b_hnp_enable = 1;
+ err = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ bus->b_hnp_enable
+ ? USB_DEVICE_B_HNP_ENABLE
+ : USB_DEVICE_A_ALT_HNP_SUPPORT,
+ 0, NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
+ if (err < 0) {
+ /* OTG MESSAGE: report errors here,
+ * customize to match your product.
+ */
+ dev_info(&udev->dev,
+ "can't set HNP mode; %d\n",
+ err);
+ bus->b_hnp_enable = 0;
+ }
+ }
+ }
+ }
+
+ if (!is_targeted(udev)) {
+
+ /* Maybe it can talk to us, though we can't talk to it.
+ * (Includes HNP test device.)
+ */
+ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
+ static int __usb_suspend_device (struct usb_device *,
+ int port1, u32 state);
+ err = __usb_suspend_device(udev,
+ udev->bus->otg_port,
+ PM_SUSPEND_MEM);
+ if (err < 0)
+ dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+ }
+ err = -ENODEV;
+ goto fail;
+ }
+#endif
+
/* put device-specific files into sysfs */
err = device_add (&udev->dev);
if (err) {
}
-static int hub_port_status(struct usb_device *hdev, int port,
+static int hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change)
{
- struct usb_hub *hub = usb_get_intfdata(hdev->actconfig->interface[0]);
int ret;
- if (!hub)
- return -ENODEV;
-
- ret = get_port_status(hdev, port + 1, &hub->status->port);
+ ret = get_port_status(hub->hdev, port1, &hub->status->port);
if (ret < 0)
- dev_err (&hub->intf->dev,
+ dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
-#define SET_CONFIG_TRIES 2
+#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
+#define USE_NEW_SCHEME(i) ((i) / 2 == old_scheme_first)
#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
#define HUB_LONG_RESET_TIME 200
#define HUB_RESET_TIMEOUT 500
-static int hub_port_wait_reset(struct usb_device *hdev, int port,
+static int hub_port_wait_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay)
{
int delay_time, ret;
msleep(delay);
/* read and decode port status */
- ret = hub_port_status(hdev, port, &portstatus, &portchange);
+ ret = hub_port_status(hub, port1, &portstatus, &portchange);
if (ret < 0)
return ret;
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
- dev_dbg (hubdev (hdev),
+ dev_dbg (hub->intfdev,
"port %d not reset yet, waiting %dms\n",
- port + 1, delay);
+ port1, delay);
}
return -EBUSY;
}
-static int hub_port_reset(struct usb_device *hdev, int port,
+static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay)
{
int i, status;
- struct device *hub_dev = hubdev (hdev);
/* Reset the port */
for (i = 0; i < PORT_RESET_TRIES; i++) {
- status = set_port_feature(hdev, port + 1, USB_PORT_FEAT_RESET);
+ status = set_port_feature(hub->hdev,
+ port1, USB_PORT_FEAT_RESET);
if (status)
- dev_err(hub_dev, "cannot reset port %d (err = %d)\n",
- port + 1, status);
+ dev_err(hub->intfdev,
+ "cannot reset port %d (err = %d)\n",
+ port1, status);
else
- status = hub_port_wait_reset(hdev, port, udev, delay);
+ status = hub_port_wait_reset(hub, port1, udev, delay);
/* return on disconnect or reset */
- if (status == -ENOTCONN || status == 0) {
- clear_port_feature(hdev,
- port + 1, USB_PORT_FEAT_C_RESET);
+ switch (status) {
+ case 0:
+ /* TRSTRCY = 10 ms */
+ msleep(10);
+ /* FALL THROUGH */
+ case -ENOTCONN:
+ case -ENODEV:
+ clear_port_feature(hub->hdev,
+ port1, USB_PORT_FEAT_C_RESET);
+ /* FIXME need disconnect() for NOTATTACHED device */
usb_set_device_state(udev, status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
return status;
}
- dev_dbg (hub_dev,
+ dev_dbg (hub->intfdev,
"port %d not enabled, trying reset again...\n",
- port + 1);
+ port1);
delay = HUB_LONG_RESET_TIME;
}
- dev_err (hub_dev,
+ dev_err (hub->intfdev,
"Cannot enable port %i. Maybe the USB cable is bad?\n",
- port + 1);
+ port1);
return status;
}
-static int hub_port_disable(struct usb_device *hdev, int port)
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
+ struct usb_device *hdev = hub->hdev;
int ret;
- if (hdev->children[port])
- usb_set_device_state(hdev->children[port],
+ if (hdev->children[port1-1] && set_state) {
+ usb_set_device_state(hdev->children[port1-1],
USB_STATE_NOTATTACHED);
- ret = clear_port_feature(hdev, port + 1, USB_PORT_FEAT_ENABLE);
+ }
+ ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
if (ret)
- dev_err(hubdev(hdev), "cannot disable port %d (err = %d)\n",
- port + 1, ret);
+ dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+ port1, ret);
return ret;
}
+/*
+ * Disable a port and mark a logical connnect-change event, so that some
+ * time later khubd will disconnect() any existing usb_device on the port
+ * and will re-enumerate if there actually is a device attached.
+ */
+static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
+{
+ dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1);
+ hub_port_disable(hub, port1, 1);
+
+ /* FIXME let caller ask to power down the port:
+ * - some devices won't enumerate without a VBUS power cycle
+ * - SRP saves power that way
+ * - usb_suspend_device(dev,PM_SUSPEND_DISK)
+ * That's easy if this hub can switch power per-port, and
+ * khubd reactivates the port later (timer, SRP, etc).
+ * Powerdown must be optional, because of reset/DFU.
+ */
+
+ set_bit(port1, hub->change_bits);
+ kick_khubd(hub);
+}
+
+
#ifdef CONFIG_USB_SUSPEND
- /* no USB_SUSPEND yet! */
+/*
+ * Selective port suspend reduces power; most suspended devices draw
+ * less than 500 uA. It's also used in OTG, along with remote wakeup.
+ * All devices below the suspended port are also suspended.
+ *
+ * Devices leave suspend state when the host wakes them up. Some devices
+ * also support "remote wakeup", where the device can activate the USB
+ * tree above them to deliver data, such as a keypress or packet. In
+ * some cases, this wakes the USB host.
+ */
+static int hub_port_suspend(struct usb_hub *hub, int port1,
+ struct usb_device *udev)
+{
+ int status;
+
+ // dev_dbg(hub->intfdev, "suspend port %d\n", port1);
+
+ /* enable remote wakeup when appropriate; this lets the device
+ * wake up the upstream hub (including maybe the root hub).
+ *
+ * NOTE: OTG devices may issue remote wakeup (or SRP) even when
+ * we don't explicitly enable it here.
+ */
+ if (udev->actconfig
+ // && FIXME (remote wakeup enabled on this bus)
+ // ... currently assuming it's always appropriate
+ && (udev->actconfig->desc.bmAttributes
+ & USB_CONFIG_ATT_WAKEUP) != 0) {
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (status)
+ dev_dbg(&udev->dev,
+ "won't remote wakeup, status %d\n",
+ status);
+ }
+
+ /* see 7.1.7.6 */
+ status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
+ if (status) {
+ dev_dbg(hub->intfdev,
+ "can't suspend port %d, status %d\n",
+ port1, status);
+ /* paranoia: "should not happen" */
+ (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ /* device has up to 10 msec to fully suspend */
+ dev_dbg(&udev->dev, "usb suspend\n");
+ usb_set_device_state(udev, USB_STATE_SUSPENDED);
+ msleep(10);
+ }
+ return status;
+}
+
+/*
+ * Devices on USB hub ports have only one "suspend" state, corresponding
+ * to ACPI D2 (PM_SUSPEND_MEM), "may cause the device to lose some context".
+ * State transitions include:
+ *
+ * - suspend, resume ... when the VBUS power link stays live
+ * - suspend, disconnect ... VBUS lost
+ *
+ * Once VBUS drop breaks the circuit, the port it's using has to go through
+ * normal re-enumeration procedures, starting with enabling VBUS power.
+ * Other than re-initializing the hub (plug/unplug, except for root hubs),
+ * Linux (2.6) currently has NO mechanisms to initiate that: no khubd
+ * timer, no SRP, no requests through sysfs.
+ */
+int __usb_suspend_device (struct usb_device *udev, int port1, u32 state)
+{
+ int status;
+
+ /* caller owns the udev device lock */
+ if (port1 < 0)
+ return port1;
+
+ if (udev->state == USB_STATE_SUSPENDED
+ || udev->state == USB_STATE_NOTATTACHED) {
+ return 0;
+ }
+
+ /* suspend interface drivers; if this is a hub, it
+ * suspends the child devices
+ */
+ if (udev->actconfig) {
+ int i;
+
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+
+ intf = udev->actconfig->interface[i];
+ if (state <= intf->dev.power.power_state)
+ continue;
+ if (!intf->dev.driver)
+ continue;
+ driver = to_usb_driver(intf->dev.driver);
+
+ if (driver->suspend) {
+ status = driver->suspend(intf, state);
+ if (intf->dev.power.power_state != state
+ || status)
+ dev_err(&intf->dev,
+ "suspend %d fail, code %d\n",
+ state, status);
+ }
+
+ /* only drivers with suspend() can ever resume();
+ * and after power loss, even they won't.
+ * bus_rescan_devices() can rebind drivers later.
+ *
+ * FIXME the PM core self-deadlocks when unbinding
+ * drivers during suspend/resume ... everything grabs
+ * dpm_sem (not a spinlock, ugh). we want to unbind,
+ * since we know every driver's probe/disconnect works
+ * even for drivers that can't suspend.
+ */
+ if (!driver->suspend || state > PM_SUSPEND_MEM) {
+#if 1
+ dev_warn(&intf->dev, "resume is unsafe!\n");
+#else
+ down_write(&usb_bus_type.rwsem);
+ device_release_driver(&intf->dev);
+ up_write(&usb_bus_type.rwsem);
+#endif
+ }
+ }
+ }
+
+ /*
+ * FIXME this needs port power off call paths too, to help force
+ * USB into the "generic" PM model. At least for devices on
+ * ports that aren't using ganged switching (usually root hubs).
+ *
+ * NOTE: SRP-capable links should adopt more aggressive poweroff
+ * policies (when HNP doesn't apply) once we have mechanisms to
+ * turn power back on! (Likely not before 2.7...)
+ */
+ if (state > PM_SUSPEND_MEM) {
+ dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
+ }
+
+ /* "global suspend" of the HC-to-USB interface (root hub), or
+ * "selective suspend" of just one hub-device link.
+ */
+ if (!udev->parent) {
+ struct usb_bus *bus = udev->bus;
+ if (bus && bus->op->hub_suspend) {
+ status = bus->op->hub_suspend (bus);
+ if (status == 0)
+ usb_set_device_state(udev,
+ USB_STATE_SUSPENDED);
+ } else
+ status = -EOPNOTSUPP;
+ } else
+ status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
+ udev);
+
+ if (status == 0)
+ udev->dev.power.power_state = state;
+ return status;
+}
+
+/**
+ * usb_suspend_device - suspend a usb device
+ * @udev: device that's no longer in active use
+ * @state: PM_SUSPEND_MEM to suspend
+ * Context: must be able to sleep; device not locked
+ *
+ * Suspends a USB device that isn't in active use, conserving power.
+ * Devices may wake out of a suspend, if anything important happens,
+ * using the remote wakeup mechanism. They may also be taken out of
+ * suspend by the host, using usb_resume_device(). It's also routine
+ * to disconnect devices while they are suspended.
+ *
+ * Suspending OTG devices may trigger HNP, if that's been enabled
+ * between a pair of dual-role devices. That will change roles, such
+ * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_suspend_device(struct usb_device *udev, u32 state)
+{
+ int port1, status;
+
+ port1 = locktree(udev);
+ if (port1 < 0)
+ return port1;
+
+ status = __usb_suspend_device(udev, port1, state);
+ usb_unlock_device(udev);
+ return status;
+}
+
+/*
+ * hardware resume signaling is finished, either because of selective
+ * resume (by host) or remote wakeup (by device) ... now see what changed
+ * in the tree that's rooted at this device.
+ */
+static int finish_port_resume(struct usb_device *udev)
+{
+ int status;
+ u16 devstatus;
+
+ /* caller owns the udev device lock */
+ dev_dbg(&udev->dev, "usb resume\n");
+
+ /* usb ch9 identifies four variants of SUSPENDED, based on what
+ * state the device resumes to. Linux currently won't see the
+ * first two on the host side; they'd be inside hub_port_init()
+ * during many timeouts, but khubd can't suspend until later.
+ */
+ usb_set_device_state(udev, udev->actconfig
+ ? USB_STATE_CONFIGURED
+ : USB_STATE_ADDRESS);
+ udev->dev.power.power_state = PM_SUSPEND_ON;
+
+ /* 10.5.4.5 says be sure devices in the tree are still there.
+ * For now let's assume the device didn't go crazy on resume,
+ * and device drivers will know about any resume quirks.
+ */
+ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+ if (status < 0)
+ dev_dbg(&udev->dev,
+ "gone after usb resume? status %d\n",
+ status);
+ else if (udev->actconfig) {
+ unsigned i;
+
+ le16_to_cpus(&devstatus);
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+ status = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (status) {
+ dev_dbg(&udev->dev, "disable remote "
+ "wakeup, status %d\n", status);
+ status = 0;
+ }
+ }
+
+ /* resume interface drivers; if this is a hub, it
+ * resumes the child devices
+ */
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+
+ intf = udev->actconfig->interface[i];
+ if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ continue;
+ if (!intf->dev.driver) {
+ /* FIXME maybe force to alt 0 */
+ continue;
+ }
+ driver = to_usb_driver(intf->dev.driver);
+
+ /* bus_rescan_devices() may rebind drivers */
+ if (!driver->resume)
+ continue;
+
+ /* can we do better than just logging errors? */
+ status = driver->resume(intf);
+ if (intf->dev.power.power_state != PM_SUSPEND_ON
+ || status)
+ dev_dbg(&intf->dev,
+ "resume fail, state %d code %d\n",
+ intf->dev.power.power_state, status);
+ }
+ status = 0;
+
+ } else if (udev->devnum <= 0) {
+ dev_dbg(&udev->dev, "bogus resume!\n");
+ status = -EINVAL;
+ }
+ return status;
+}
+
+static int
+hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
+{
+ int status;
+
+ // dev_dbg(hub->intfdev, "resume port %d\n", port1);
+
+ /* see 7.1.7.7; affects power usage, but not budgeting */
+ status = clear_port_feature(hub->hdev,
+ port1, USB_PORT_FEAT_SUSPEND);
+ if (status) {
+ dev_dbg(hub->intfdev,
+ "can't resume port %d, status %d\n",
+ port1, status);
+ } else {
+ u16 devstatus;
+ u16 portchange;
+
+ /* drive resume for at least 20 msec */
+ if (udev)
+ dev_dbg(&udev->dev, "RESUME\n");
+ msleep(25);
+
+#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
+ | USB_PORT_STAT_ENABLE \
+ | USB_PORT_STAT_CONNECTION)
+
+ /* Virtual root hubs can trigger on GET_PORT_STATUS to
+ * stop resume signaling. Then finish the resume
+ * sequence.
+ */
+ devstatus = portchange = 0;
+ status = hub_port_status(hub, port1,
+ &devstatus, &portchange);
+ if (status < 0
+ || (devstatus & LIVE_FLAGS) != LIVE_FLAGS
+ || (devstatus & USB_PORT_STAT_SUSPEND) != 0
+ ) {
+ dev_dbg(hub->intfdev,
+ "port %d status %04x.%04x after resume, %d\n",
+ port1, portchange, devstatus, status);
+ } else {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ if (udev)
+ status = finish_port_resume(udev);
+ }
+ }
+ if (status < 0)
+ hub_port_logical_disconnect(hub, port1);
+
+ return status;
+}
+
+static int hub_resume (struct usb_interface *intf);
+
+/**
+ * usb_resume_device - re-activate a suspended usb device
+ * @udev: device to re-activate
+ * Context: must be able to sleep; device not locked
+ *
+ * This will re-activate the suspended device, increasing power usage
+ * while letting drivers communicate again with its endpoints.
+ * USB resume explicitly guarantees that the power session between
+ * the host and the device is the same as it was when the device
+ * suspended.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_resume_device(struct usb_device *udev)
+{
+ int port1, status;
+
+ port1 = locktree(udev);
+ if (port1 < 0)
+ return port1;
+
+ /* "global resume" of the HC-to-USB interface (root hub), or
+ * selective resume of one hub-to-device port
+ */
+ if (!udev->parent) {
+ struct usb_bus *bus = udev->bus;
+ if (bus && bus->op->hub_resume) {
+ status = bus->op->hub_resume (bus);
+ } else
+ status = -EOPNOTSUPP;
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ usb_set_device_state (udev, USB_STATE_CONFIGURED);
+ status = hub_resume (udev
+ ->actconfig->interface[0]);
+ }
+ } else if (udev->state == USB_STATE_SUSPENDED) {
+ // NOTE this fails if parent is also suspended...
+ status = hub_port_resume(hdev_to_hub(udev->parent),
+ port1, udev);
+ } else {
+ status = 0;
+ }
+ if (status < 0) {
+ dev_dbg(&udev->dev, "can't resume, status %d\n",
+ status);
+ }
+
+ usb_unlock_device(udev);
+
+ /* rebind drivers that had no suspend() */
+ if (status == 0) {
+ usb_lock_all_devices();
+ bus_rescan_devices(&usb_bus_type);
+ usb_unlock_all_devices();
+ }
+ return status;
+}
+
+static int remote_wakeup(struct usb_device *udev)
+{
+ int status = 0;
+
+ /* don't repeat RESUME sequence if this device
+ * was already woken up by some other task
+ */
+ down(&udev->serialize);
+ if (udev->state == USB_STATE_SUSPENDED) {
+ dev_dbg(&udev->dev, "RESUME (wakeup)\n");
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ status = finish_port_resume(udev);
+ }
+ up(&udev->serialize);
+ return status;
+}
+
+static int hub_suspend(struct usb_interface *intf, u32 state)
+{
+ struct usb_hub *hub = usb_get_intfdata (intf);
+ struct usb_device *hdev = hub->hdev;
+ unsigned port1;
+ int status;
+
+ /* stop khubd and related activity */
+ hub_quiesce(hub);
+
+ /* then suspend every port */
+ for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+ struct usb_device *udev;
+
+ udev = hdev->children [port1-1];
+ if (!udev)
+ continue;
+ down(&udev->serialize);
+ status = __usb_suspend_device(udev, port1, state);
+ up(&udev->serialize);
+ if (status < 0)
+ dev_dbg(&intf->dev, "suspend port %d --> %d\n",
+ port1, status);
+ }
+
+ intf->dev.power.power_state = state;
+ return 0;
+}
+
+static int hub_resume(struct usb_interface *intf)
+{
+ struct usb_device *hdev = interface_to_usbdev(intf);
+ struct usb_hub *hub = usb_get_intfdata (intf);
+ unsigned port1;
+ int status;
+
+ if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ return 0;
+
+ for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+ struct usb_device *udev;
+ u16 portstat, portchange;
+
+ udev = hdev->children [port1-1];
+ status = hub_port_status(hub, port1, &portstat, &portchange);
+ if (status == 0) {
+ if (portchange & USB_PORT_STAT_C_SUSPEND) {
+ clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_C_SUSPEND);
+ portchange &= ~USB_PORT_STAT_C_SUSPEND;
+ }
+
+ /* let khubd handle disconnects etc */
+ if (portchange)
+ continue;
+ }
+
+ if (!udev || status < 0)
+ continue;
+ down (&udev->serialize);
+ if (portstat & USB_PORT_STAT_SUSPEND)
+ status = hub_port_resume(hub, port1, udev);
+ else {
+ status = finish_port_resume(udev);
+ if (status < 0) {
+ dev_dbg(&intf->dev, "resume port %d --> %d\n",
+ port1, status);
+ hub_port_logical_disconnect(hub, port1);
+ }
+ }
+ up(&udev->serialize);
+ }
+ intf->dev.power.power_state = PM_SUSPEND_ON;
+
+ hub_activate(hub);
+ return 0;
+}
#else /* !CONFIG_USB_SUSPEND */
#define HUB_DEBOUNCE_STEP 25
#define HUB_DEBOUNCE_STABLE 100
-static int hub_port_debounce(struct usb_device *hdev, int port)
+static int hub_port_debounce(struct usb_hub *hub, int port1)
{
int ret;
int total_time, stable_time = 0;
unsigned connection = 0xffff;
for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
- ret = hub_port_status(hdev, port, &portstatus, &portchange);
+ ret = hub_port_status(hub, port1, &portstatus, &portchange);
if (ret < 0)
return ret;
}
if (portchange & USB_PORT_STAT_C_CONNECTION) {
- clear_port_feature(hdev, port+1,
+ clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_CONNECTION);
}
msleep(HUB_DEBOUNCE_STEP);
}
- dev_dbg (hubdev (hdev),
+ dev_dbg (hub->intfdev,
"debounce: port %d: total %dms stable %dms status 0x%x\n",
- port + 1, total_time, stable_time, portstatus);
+ port1, total_time, stable_time, portstatus);
if (stable_time < HUB_DEBOUNCE_STABLE)
return -ETIMEDOUT;
return portstatus;
}
+static void ep0_reinit(struct usb_device *udev)
+{
+ usb_disable_endpoint(udev, 0 + USB_DIR_IN);
+ usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ udev->ep_in[0] = udev->ep_out[0] = &udev->ep0;
+}
+
+#define usb_sndaddr0pipe() (PIPE_CONTROL << 30)
+#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN)
+
static int hub_set_address(struct usb_device *udev)
{
int retval;
if (udev->devnum == 0)
return -EINVAL;
- if (udev->state != USB_STATE_DEFAULT &&
- udev->state != USB_STATE_ADDRESS)
+ if (udev->state == USB_STATE_ADDRESS)
+ return 0;
+ if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
- retval = usb_control_msg(udev, (PIPE_CONTROL << 30) /* Address 0 */,
+ retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
- if (retval == 0)
+ if (retval == 0) {
usb_set_device_state(udev, USB_STATE_ADDRESS);
+ ep0_reinit(udev);
+ }
return retval;
}
* pointers, it's not necessary to lock the device.
*/
static int
-hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
+hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+ int retry_counter)
{
static DECLARE_MUTEX(usb_address0_sem);
+ struct usb_device *hdev = hub->hdev;
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
*/
if (!hdev->parent) {
delay = HUB_ROOT_RESET_TIME;
- if (port + 1 == hdev->bus->otg_port)
+ if (port1 == hdev->bus->otg_port)
hdev->bus->b_hnp_enable = 0;
}
down(&usb_address0_sem);
/* Reset the device; full speed may morph to high speed */
- retval = hub_port_reset(hdev, port, udev, delay);
+ retval = hub_port_reset(hub, port1, udev, delay);
if (retval < 0) /* error or disconnect */
goto fail;
/* success, speed is known */
dev_dbg(&udev->dev, "device reset changed speed!\n");
goto fail;
}
+ oldspeed = udev->speed;
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
*/
switch (udev->speed) {
case USB_SPEED_HIGH: /* fixed at 64 */
- i = 64;
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
- /* to determine the ep0 maxpacket size, read the first 8
- * bytes from the device descriptor to get bMaxPacketSize0;
- * then correct our initial (small) guess.
+ /* to determine the ep0 maxpacket size, try to read
+ * the device descriptor to get bMaxPacketSize0 and
+ * then correct our initial guess.
*/
- // FALLTHROUGH
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+ break;
case USB_SPEED_LOW: /* fixed at 8 */
- i = 8;
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
break;
default:
goto fail;
}
- udev->epmaxpacketin [0] = i;
- udev->epmaxpacketout[0] = i;
dev_info (&udev->dev,
- "%s %s speed USB device using address %d\n",
+ "%s %s speed USB device using %s and address %d\n",
(udev->config) ? "reset" : "new",
({ char *speed; switch (udev->speed) {
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_HIGH: speed = "high"; break;
default: speed = "?"; break;
}; speed;}),
+ udev->bus->controller->driver->name,
udev->devnum);
/* Set up TT records, if needed */
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {
- struct usb_hub *hub;
-
- hub = usb_get_intfdata(hdev->actconfig->interface[0]);
udev->tt = &hub->tt;
- udev->ttport = port + 1;
+ udev->ttport = port1;
}
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
* this area, and this is how Linux has done it for ages.
* Change it cautiously.
*
- * NOTE: Windows gets the descriptor first, seemingly to help
- * work around device bugs like "can't use addresses with bit 3
- * set in certain configurations". Yes, really.
+ * NOTE: If USE_NEW_SCHEME() is true we will start by issuing
+ * a 64-byte GET_DESCRIPTOR request. This is what Windows does,
+ * so it may help with some non-standards-compliant devices.
+ * Otherwise we start with SET_ADDRESS and then try to read the
+ * first 8 bytes of the device descriptor to get the ep0 maxpacket
+ * value.
*/
- for (i = 0; i < GET_DESCRIPTOR_TRIES; ++i) {
+ for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
+ if (USE_NEW_SCHEME(retry_counter)) {
+ struct usb_device_descriptor *buf;
+ int r = 0;
+
+#define GET_DESCRIPTOR_BUFSIZE 64
+ buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
+ if (!buf) {
+ retval = -ENOMEM;
+ continue;
+ }
+ buf->bMaxPacketSize0 = 0;
+
+ /* Use a short timeout the first time through,
+ * so that recalcitrant full-speed devices with
+ * 8- or 16-byte ep0-maxpackets won't slow things
+ * down tremendously by NAKing the unexpectedly
+ * early status stage. Also, retry on length 0
+ * or stall; some devices are flakey.
+ */
+ for (j = 0; j < 3; ++j) {
+ r = usb_control_msg(udev, usb_rcvaddr0pipe(),
+ USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+ USB_DT_DEVICE << 8, 0,
+ buf, GET_DESCRIPTOR_BUFSIZE,
+ (i ? HZ * USB_CTRL_GET_TIMEOUT : HZ));
+ if (r == 0 || r == -EPIPE)
+ continue;
+ if (r < 0)
+ break;
+ }
+ udev->descriptor.bMaxPacketSize0 =
+ buf->bMaxPacketSize0;
+ kfree(buf);
+
+ retval = hub_port_reset(hub, port1, udev, delay);
+ if (retval < 0) /* error or disconnect */
+ goto fail;
+ if (oldspeed != udev->speed) {
+ dev_dbg(&udev->dev,
+ "device reset changed speed!\n");
+ retval = -ENODEV;
+ goto fail;
+ }
+ switch (udev->descriptor.bMaxPacketSize0) {
+ case 64: case 32: case 16: case 8:
+ break;
+ default:
+ dev_err(&udev->dev, "device descriptor "
+ "read/%s, error %d\n",
+ "64", r);
+ retval = -EMSGSIZE;
+ continue;
+ }
+#undef GET_DESCRIPTOR_BUFSIZE
+ }
+
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev);
if (retval >= 0)
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
+ if (USE_NEW_SCHEME(retry_counter))
+ break;
+
retval = usb_get_device_descriptor(udev, 8);
- if (retval >= 8)
+ if (retval < 8) {
+ dev_err(&udev->dev, "device descriptor "
+ "read/%s, error %d\n",
+ "8", retval);
+ if (retval >= 0)
+ retval = -EMSGSIZE;
+ } else {
+ retval = 0;
break;
- msleep(100);
+ }
}
- if (retval != 8) {
- dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
- "8", retval);
- if (retval >= 0)
- retval = -EMSGSIZE;
+ if (retval)
goto fail;
- }
- if (udev->speed == USB_SPEED_FULL
- && (udev->epmaxpacketin [0]
- != udev->descriptor.bMaxPacketSize0)) {
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
- usb_endpoint_running(udev, 0, 1);
- usb_endpoint_running(udev, 0, 0);
- udev->epmaxpacketin [0] = udev->descriptor.bMaxPacketSize0;
- udev->epmaxpacketout[0] = udev->descriptor.bMaxPacketSize0;
+
+ i = udev->descriptor.bMaxPacketSize0;
+ if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
+ if (udev->speed != USB_SPEED_FULL ||
+ !(i == 8 || i == 16 || i == 32 || i == 64)) {
+ dev_err(&udev->dev, "ep0 maxpacket = %d\n", i);
+ retval = -EMSGSIZE;
+ goto fail;
+ }
+ dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
+ ep0_reinit(udev);
}
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
retval = 0;
fail:
+ if (retval)
+ hub_port_disable(hub, port1, 0);
up(&usb_address0_sem);
return retval;
}
static void
-check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port)
+check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
{
struct usb_qualifier_descriptor *qual;
int status;
qual = kmalloc (sizeof *qual, SLAB_KERNEL);
- if (qual == 0)
+ if (qual == NULL)
return;
status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
"connect to a high speed hub\n");
/* hub LEDs are probably harder to miss than syslog */
if (hub->has_indicators) {
- hub->indicator[port] = INDICATOR_GREEN_BLINK;
+ hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
schedule_work (&hub->leds);
}
}
remaining -= delta;
}
if (remaining < 0) {
- dev_warn(&hub->intf->dev,
+ dev_warn(hub->intfdev,
"%dmA over power budget!\n",
-2 * remaining);
remaining = 0;
* a port enable-change occurs (often caused by EMI);
* usb_reset_device() encounters changed descriptors (as from
* a firmware download)
+ * caller already locked the hub
*/
-static void hub_port_connect_change(struct usb_hub *hub, int port,
+static void hub_port_connect_change(struct usb_hub *hub, int port1,
u16 portstatus, u16 portchange)
{
struct usb_device *hdev = hub->hdev;
- struct device *hub_dev = &hub->intf->dev;
+ struct device *hub_dev = hub->intfdev;
int status, i;
dev_dbg (hub_dev,
"port %d, status %04x, change %04x, %s\n",
- port + 1, portstatus, portchange, portspeed (portstatus));
+ port1, portstatus, portchange, portspeed (portstatus));
if (hub->has_indicators) {
- set_port_led(hdev, port + 1, HUB_LED_AUTO);
- hub->indicator[port] = INDICATOR_AUTO;
+ set_port_led(hub, port1, HUB_LED_AUTO);
+ hub->indicator[port1-1] = INDICATOR_AUTO;
}
/* Disconnect any existing devices under this port */
- if (hdev->children[port])
- usb_disconnect(&hdev->children[port]);
- clear_bit(port, hub->change_bits);
+ if (hdev->children[port1-1])
+ usb_disconnect(&hdev->children[port1-1]);
+ clear_bit(port1, hub->change_bits);
+
+#ifdef CONFIG_USB_OTG
+ /* during HNP, don't repeat the debounce */
+ if (hdev->bus->is_b_host)
+ portchange &= ~USB_PORT_STAT_C_CONNECTION;
+#endif
if (portchange & USB_PORT_STAT_C_CONNECTION) {
- status = hub_port_debounce(hdev, port);
+ status = hub_port_debounce(hub, port1);
if (status < 0) {
dev_err (hub_dev,
"connect-debounce failed, port %d disabled\n",
- port+1);
+ port1);
goto done;
}
portstatus = status;
if ((hub->descriptor->wHubCharacteristics
& HUB_CHAR_LPSM) < 2
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
- set_port_feature(hdev, port + 1, USB_PORT_FEAT_POWER);
+ set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)
goto done;
return;
}
+#ifdef CONFIG_USB_SUSPEND
+ /* If something is connected, but the port is suspended, wake it up. */
+ if (portstatus & USB_PORT_STAT_SUSPEND) {
+ status = hub_port_resume(hub, port1, NULL);
+ if (status < 0) {
+ dev_dbg(hub_dev,
+ "can't clear suspend on port %d; %d\n",
+ port1, status);
+ goto done;
+ }
+ }
+#endif
+
for (i = 0; i < SET_CONFIG_TRIES; i++) {
struct usb_device *udev;
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
*/
- udev = usb_alloc_dev(hdev, hdev->bus, port);
+ udev = usb_alloc_dev(hdev, hdev->bus, port1);
if (!udev) {
dev_err (hub_dev,
- "couldn't allocate port %d usb_device\n", port+1);
+ "couldn't allocate port %d usb_device\n",
+ port1);
goto done;
}
}
/* reset and get descriptor */
- status = hub_port_init(hdev, udev, port);
+ status = hub_port_init(hub, udev, port1, i);
if (status < 0)
goto loop;
&devstat);
if (status < 0) {
dev_dbg(&udev->dev, "get status %d ?\n", status);
- goto loop;
+ goto loop_disable;
}
cpu_to_le16s(&devstat);
if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
"can't connect bus-powered hub "
"to this port\n");
if (hub->has_indicators) {
- hub->indicator[port] =
+ hub->indicator[port1-1] =
INDICATOR_AMBER_BLINK;
schedule_work (&hub->leds);
}
status = -ENOTCONN; /* Don't retry */
- goto loop;
+ goto loop_disable;
}
}
/* check for devices running slower than they could */
- if (udev->descriptor.bcdUSB >= 0x0200
+ if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
&& udev->speed == USB_SPEED_FULL
&& highspeed_hubs != 0)
- check_highspeed (hub, udev, port);
+ check_highspeed (hub, udev, port1);
/* Store the parent's children[] pointer. At this point
* udev becomes globally accessible, although presumably
if (hdev->state == USB_STATE_NOTATTACHED)
status = -ENOTCONN;
else
- hdev->children[port] = udev;
+ hdev->children[port1-1] = udev;
spin_unlock_irq(&device_state_lock);
/* Run it through the hoops (find a driver, etc) */
status = usb_new_device(udev);
if (status) {
spin_lock_irq(&device_state_lock);
- hdev->children[port] = NULL;
+ hdev->children[port1-1] = NULL;
spin_unlock_irq(&device_state_lock);
}
}
up (&udev->serialize);
if (status)
- goto loop;
+ goto loop_disable;
status = hub_power_remaining(hub);
if (status)
return;
+loop_disable:
+ hub_port_disable(hub, port1, 1);
loop:
- hub_port_disable(hdev, port);
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ ep0_reinit(udev);
release_address(udev);
usb_put_dev(udev);
if (status == -ENOTCONN)
}
done:
- hub_port_disable(hdev, port);
+ hub_port_disable(hub, port1, 1);
}
static void hub_events(void)
{
struct list_head *tmp;
struct usb_device *hdev;
+ struct usb_interface *intf;
struct usb_hub *hub;
struct device *hub_dev;
u16 hubstatus;
hub = list_entry(tmp, struct usb_hub, event_list);
hdev = hub->hdev;
- hub_dev = &hub->intf->dev;
-
- usb_get_dev(hdev);
+ intf = to_usb_interface(hub->intfdev);
+ hub_dev = &intf->dev;
+
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+ hdev->state, hub->descriptor
+ ? hub->descriptor->bNbrPorts
+ : 0,
+ /* NOTE: expects max 15 ports... */
+ (u16) hub->change_bits[0],
+ (u16) hub->event_bits[0]);
+
+ usb_get_intf(intf);
spin_unlock_irq(&hub_event_lock);
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
- down(&hdev->serialize);
- if (hdev->state != USB_STATE_CONFIGURED ||
- !hdev->actconfig ||
- hub != usb_get_intfdata(
- hdev->actconfig->interface[0]))
+ if (locktree(hdev) < 0) {
+ usb_put_intf(intf);
+ continue;
+ }
+ if (hub != usb_get_intfdata(intf) || hub->quiescing)
goto loop;
if (hub->error) {
dev_dbg (hub_dev, "resetting for error %d\n",
hub->error);
- if (hub_reset(hub)) {
+ ret = usb_reset_device(hdev);
+ if (ret) {
dev_dbg (hub_dev,
- "can't reset; disconnecting\n");
- hub_start_disconnect(hdev);
+ "error resetting hub: %d\n", ret);
goto loop;
}
}
/* deal with port status changes */
- for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
+ for (i = 1; i <= hub->descriptor->bNbrPorts; i++) {
connect_change = test_bit(i, hub->change_bits);
- if (!test_and_clear_bit(i+1, hub->event_bits) &&
+ if (!test_and_clear_bit(i, hub->event_bits) &&
!connect_change)
continue;
- ret = hub_port_status(hdev, i,
+ ret = hub_port_status(hub, i,
&portstatus, &portchange);
if (ret < 0)
continue;
if (portchange & USB_PORT_STAT_C_CONNECTION) {
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_CONNECTION);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_CONNECTION);
connect_change = 1;
}
dev_dbg (hub_dev,
"port %d enable change, "
"status %08x\n",
- i + 1, portstatus);
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_ENABLE);
+ i, portstatus);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_ENABLE);
/*
* EM interference sometimes causes badly
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
&& !connect_change
- && hdev->children[i]) {
+ && hdev->children[i-1]) {
dev_err (hub_dev,
"port %i "
"disabled by hub (EMI?), "
"re-enabling...\n",
- i + 1);
+ i);
connect_change = 1;
}
}
if (portchange & USB_PORT_STAT_C_SUSPEND) {
- clear_port_feature(hdev, i + 1,
+ clear_port_feature(hdev, i,
USB_PORT_FEAT_C_SUSPEND);
- if (hdev->children[i])
- ret = remote_wakeup(hdev->children[i]);
- else
+ if (hdev->children[i-1]) {
+ ret = remote_wakeup(hdev->
+ children[i-1]);
+ if (ret < 0)
+ connect_change = 1;
+ } else {
ret = -ENODEV;
+ hub_port_disable(hub, i, 1);
+ }
dev_dbg (hub_dev,
"resume on port %d, status %d\n",
- i + 1, ret);
- if (ret < 0)
- ret = hub_port_disable(hdev, i);
+ i, ret);
}
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
dev_err (hub_dev,
"over-current change on port %d\n",
- i + 1);
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_OVER_CURRENT);
+ i);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_OVER_CURRENT);
hub_power_on(hub);
}
if (portchange & USB_PORT_STAT_C_RESET) {
dev_dbg (hub_dev,
"reset change on port %d\n",
- i + 1);
- clear_port_feature(hdev,
- i + 1, USB_PORT_FEAT_C_RESET);
+ i);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_RESET);
}
if (connect_change)
}
loop:
- up(&hdev->serialize);
- usb_put_dev(hdev);
+ usb_unlock_device(hdev);
+ usb_put_intf(intf);
} /* end while (1) */
}
do {
hub_events();
wait_event_interruptible(khubd_wait, !list_empty(&hub_event_list));
- if (current->flags & PF_FREEZE)
- refrigerator(PF_FREEZE);
+ try_to_freeze(PF_FREEZE);
} while (!signal_pending(current));
pr_debug ("%s: khubd exiting\n", usbcore_name);
struct usb_config_descriptor *buf;
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
- if (len < udev->config[index].desc.wTotalLength)
- len = udev->config[index].desc.wTotalLength;
+ if (len < le16_to_cpu(udev->config[index].desc.wTotalLength))
+ len = le16_to_cpu(udev->config[index].desc.wTotalLength);
}
buf = kmalloc (len, SLAB_KERNEL);
- if (buf == 0) {
+ if (buf == NULL) {
dev_err(&udev->dev, "no mem to re-read configs after reset\n");
/* assume the worst */
return 1;
}
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
int length;
- int old_length = udev->config[index].desc.wTotalLength;
+ int old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf,
old_length);
}
/**
- * usb_reset_devce - perform a USB port reset to reinitialize a device
+ * usb_reset_device - perform a USB port reset to reinitialize a device
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
*
* WARNING - don't reset any device unless drivers for all of its
*
* The caller must own the device lock. For example, it's safe to use
* this from a driver probe() routine after downloading new firmware.
+ * For calls that might not occur during probe(), drivers should lock
+ * the device using usb_lock_device_for_reset().
*/
-int __usb_reset_device(struct usb_device *udev)
+int usb_reset_device(struct usb_device *udev)
{
- struct usb_device *parent = udev->parent;
- struct usb_device_descriptor descriptor = udev->descriptor;
- int i, ret, port = -1;
- struct usb_hub *hub;
+ struct usb_device *parent_hdev = udev->parent;
+ struct usb_hub *parent_hub;
+ struct usb_device_descriptor descriptor = udev->descriptor;
+ struct usb_hub *hub = NULL;
+ int i, ret = 0, port1 = -1;
if (udev->state == USB_STATE_NOTATTACHED ||
udev->state == USB_STATE_SUSPENDED) {
return -EINVAL;
}
- /* FIXME: This should be legal for regular hubs. Root hubs may
- * have special requirements. */
- if (udev->maxchild) {
- /* this requires hub- or hcd-specific logic;
- * see hub_reset() and OHCI hc_restart()
- */
- dev_dbg(&udev->dev, "%s for hub!\n", __FUNCTION__);
+ if (!parent_hdev) {
+ /* this requires hcd-specific logic; see OHCI hc_restart() */
+ dev_dbg(&udev->dev, "%s for root hub!\n", __FUNCTION__);
return -EISDIR;
}
- for (i = 0; i < parent->maxchild; i++)
- if (parent->children[i] == udev) {
- port = i;
+ for (i = 0; i < parent_hdev->maxchild; i++)
+ if (parent_hdev->children[i] == udev) {
+ port1 = i + 1;
break;
}
- if (port < 0) {
+ if (port1 < 0) {
/* If this ever happens, it's very bad */
dev_err(&udev->dev, "Can't locate device's port!\n");
return -ENOENT;
}
+ parent_hub = hdev_to_hub(parent_hdev);
+
+ /* If we're resetting an active hub, take some special actions */
+ if (udev->actconfig &&
+ udev->actconfig->interface[0]->dev.driver ==
+ &hub_driver.driver &&
+ (hub = hdev_to_hub(udev)) != NULL) {
+ hub_pre_reset(hub);
+ }
+
+ for (i = 0; i < SET_CONFIG_TRIES; ++i) {
- ret = hub_port_init(parent, udev, port);
+ /* ep0 maxpacket size may change; let the HCD know about it.
+ * Other endpoints will be handled by re-enumeration. */
+ ep0_reinit(udev);
+ ret = hub_port_init(parent_hub, udev, port1, i);
+ if (ret >= 0)
+ break;
+ }
if (ret < 0)
goto re_enumerate;
}
if (!udev->actconfig)
- return 0;
+ goto done;
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_CONFIGURATION, 0,
struct usb_interface *intf = udev->actconfig->interface[i];
struct usb_interface_descriptor *desc;
- /* set_interface resets host side toggle and halt status even
+ /* set_interface resets host side toggle even
* for altsetting zero. the interface may have no driver.
*/
desc = &intf->cur_altsetting->desc;
}
}
+done:
+ if (hub)
+ hub_post_reset(hub);
return 0;
re_enumerate:
- hub_port_disable(parent, port);
-
- hub = usb_get_intfdata(parent->actconfig->interface[0]);
- set_bit(port, hub->change_bits);
-
- spin_lock_irq(&hub_event_lock);
- if (list_empty(&hub->event_list)) {
- list_add_tail(&hub->event_list, &hub_event_list);
- wake_up(&khubd_wait);
- }
- spin_unlock_irq(&hub_event_lock);
-
+ hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
}
-EXPORT_SYMBOL(__usb_reset_device);
-
-int usb_reset_device(struct usb_device *udev)
-{
- int r;
-
- down(&udev->serialize);
- r = __usb_reset_device(udev);
- up(&udev->serialize);
-
- return r;
-}