/*
* ether.c -- Ethernet gadget driver, with CDC and non-CDC options
*
- * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003-2005 David Brownell
* Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
*
* This program is free software; you can redistribute it and/or modify
// #define DEBUG 1
// #define VERBOSE
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
-#include <linux/uts.h>
-#include <linux/version.h>
+#include <linux/utsname.h>
#include <linux/device.h>
#include <linux/moduleparam.h>
#include <linux/ctype.h>
#include <asm/unaligned.h>
#include <linux/usb_ch9.h>
+#include <linux/usb/cdc.h>
#include <linux/usb_gadget.h>
#include <linux/random.h>
/*
* Ethernet gadget driver -- with CDC and non-CDC options
+ * Builds on hardware support for a full duplex link.
*
* CDC Ethernet is the standard USB solution for sending Ethernet frames
* using USB. Real hardware tends to use the same framing protocol but look
*/
#define DRIVER_DESC "Ethernet Gadget"
-#define DRIVER_VERSION "St Patrick's Day 2004"
+#define DRIVER_VERSION "May Day 2005"
static const char shortname [] = "ether";
static const char driver_desc [] = DRIVER_DESC;
#define RX_EXTRA 20 /* guard against rx overflows */
-#ifdef CONFIG_USB_ETH_RNDIS
#include "rndis.h"
-#else
-#define rndis_init() 0
-#define rndis_exit() do{}while(0)
+
+#ifndef CONFIG_USB_ETH_RNDIS
+#define rndis_uninit(x) do{}while(0)
+#define rndis_deregister(c) do{}while(0)
+#define rndis_exit() do{}while(0)
#endif
+/* CDC and RNDIS support the same host-chosen outgoing packet filters. */
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+
/*-------------------------------------------------------------------------*/
struct eth_dev {
spinlock_t lock;
struct usb_gadget *gadget;
struct usb_request *req; /* for control responses */
+ struct usb_request *stat_req; /* for cdc & rndis status */
u8 config;
struct usb_ep *in_ep, *out_ep, *status_ep;
const struct usb_endpoint_descriptor
*in, *out, *status;
+
+ spinlock_t req_lock;
struct list_head tx_reqs, rx_reqs;
struct net_device *net;
* It also ASSUMES a self-powered device, without remote wakeup,
* although remote wakeup support would make sense.
*/
-static const char *EP_IN_NAME;
-static const char *EP_OUT_NAME;
-static const char *EP_STATUS_NAME;
/*-------------------------------------------------------------------------*/
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
-static ushort __initdata idVendor;
+static ushort idVendor;
module_param(idVendor, ushort, S_IRUGO);
MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-static ushort __initdata idProduct;
+static ushort idProduct;
module_param(idProduct, ushort, S_IRUGO);
MODULE_PARM_DESC(idProduct, "USB Product ID");
-static ushort __initdata bcdDevice;
+static ushort bcdDevice;
module_param(bcdDevice, ushort, S_IRUGO);
MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-static char *__initdata iManufacturer;
+static char *iManufacturer;
module_param(iManufacturer, charp, S_IRUGO);
MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-static char *__initdata iProduct;
+static char *iProduct;
module_param(iProduct, charp, S_IRUGO);
MODULE_PARM_DESC(iProduct, "USB Product string");
+static char *iSerialNumber;
+module_param(iSerialNumber, charp, S_IRUGO);
+MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
+
/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
-static char *__initdata dev_addr;
+static char *dev_addr;
module_param(dev_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(iProduct, "Device Ethernet Address");
+MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
/* this address is invisible to ifconfig */
-static char *__initdata host_addr;
+static char *host_addr;
module_param(host_addr, charp, S_IRUGO);
MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
#define DEV_CONFIG_CDC
#endif
+#ifdef CONFIG_USB_GADGET_LH7A40X
+#define DEV_CONFIG_CDC
+#endif
+
#ifdef CONFIG_USB_GADGET_MQ11XX
#define DEV_CONFIG_CDC
#endif
#define DEV_CONFIG_CDC
#endif
+#ifdef CONFIG_USB_GADGET_N9604
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_AT91
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSBHSFC
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+#define DEV_CONFIG_CDC
+#endif
+
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
#define DEV_CONFIG_SUBSET
#endif
+#ifdef CONFIG_USB_GADGET_S3C2410
+#define DEV_CONFIG_CDC
+#endif
/*-------------------------------------------------------------------------*/
+/* "main" config is either CDC, or its simple subset */
+static inline int is_cdc(struct eth_dev *dev)
+{
+#if !defined(DEV_CONFIG_SUBSET)
+ return 1; /* only cdc possible */
+#elif !defined (DEV_CONFIG_CDC)
+ return 0; /* only subset possible */
+#else
+ return dev->cdc; /* depends on what hardware we found */
+#endif
+}
+
+/* "secondary" RNDIS config may sometimes be activated */
+static inline int rndis_active(struct eth_dev *dev)
+{
+#ifdef CONFIG_USB_ETH_RNDIS
+ return dev->rndis;
+#else
+ return 0;
+#endif
+}
+
+#define subset_active(dev) (!is_cdc(dev) && !rndis_active(dev))
+#define cdc_active(dev) ( is_cdc(dev) && !rndis_active(dev))
+
+
+
#define DEFAULT_QLEN 2 /* double buffering by default */
+/* peak bulk transfer bits-per-second */
+#define HS_BPS (13 * 512 * 8 * 1000 * 8)
+#define FS_BPS (19 * 64 * 1 * 1000 * 8)
+
#ifdef CONFIG_USB_GADGET_DUALSPEED
+#define DEVSPEED USB_SPEED_HIGH
static unsigned qmult = 5;
module_param (qmult, uint, S_IRUGO|S_IWUSR);
/* also defer IRQs on highspeed TX */
#define TX_DELAY qmult
-#define BITRATE(g) ((g->speed == USB_SPEED_HIGH) ? 4800000 : 120000)
+static inline int BITRATE(struct usb_gadget *g)
+{
+ return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS;
+}
#else /* full speed (low speed doesn't do bulk) */
+#define DEVSPEED USB_SPEED_FULL
+
#define qlen(gadget) DEFAULT_QLEN
-#define BITRATE(g) (12000)
+static inline int BITRATE(struct usb_gadget *g)
+{
+ return FS_BPS;
+}
#endif
#define STRING_CDC 7
#define STRING_SUBSET 8
#define STRING_RNDIS 9
+#define STRING_SERIALNUMBER 10
-#define USB_BUFSIZ 256 /* holds our biggest descriptor */
+/* holds our biggest descriptor (or RNDIS response) */
+#define USB_BUFSIZ 256
/*
* This device advertises one configuration, eth_config, unless RNDIS
.bConfigurationValue = DEV_CONFIG_VALUE,
.iConfiguration = STRING_CDC,
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1,
+ .bMaxPower = 50,
};
#ifdef CONFIG_USB_ETH_RNDIS
-static struct usb_config_descriptor
+static struct usb_config_descriptor
rndis_config = {
.bLength = sizeof rndis_config,
.bDescriptorType = USB_DT_CONFIG,
.bConfigurationValue = DEV_RNDIS_CONFIG_VALUE,
.iConfiguration = STRING_RNDIS,
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1,
+ .bMaxPower = 50,
};
#endif
/* status endpoint is optional; this may be patched later */
.bNumEndpoints = 1,
.bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = 6, /* ethernet control model */
- .bInterfaceProtocol = 0,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
.iInterface = STRING_CONTROL,
};
#endif
rndis_control_intf = {
.bLength = sizeof rndis_control_intf,
.bDescriptorType = USB_DT_INTERFACE,
-
+
.bInterfaceNumber = 0,
.bNumEndpoints = 1,
.bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = 2, /* abstract control model */
- .bInterfaceProtocol = 0xff, /* vendor specific */
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
+ .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR,
.iInterface = STRING_RNDIS_CONTROL,
};
#endif
#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */
-struct header_desc {
- u8 bLength;
- u8 bDescriptorType;
- u8 bDescriptorSubType;
-
- u16 bcdCDC;
-} __attribute__ ((packed));
-
-static const struct header_desc header_desc = {
+static const struct usb_cdc_header_desc header_desc = {
.bLength = sizeof header_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = 0,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
.bcdCDC = __constant_cpu_to_le16 (0x0110),
};
-/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
-struct union_desc {
- u8 bLength;
- u8 bDescriptorType;
- u8 bDescriptorSubType;
-
- u8 bMasterInterface0;
- u8 bSlaveInterface0;
- /* ... and there could be other slave interfaces */
-} __attribute__ ((packed));
-
-static const struct union_desc union_desc = {
+static const struct usb_cdc_union_desc union_desc = {
.bLength = sizeof union_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = 6,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
.bMasterInterface0 = 0, /* index of control interface */
.bSlaveInterface0 = 1, /* index of DATA interface */
#ifdef CONFIG_USB_ETH_RNDIS
-/* "Call Management Descriptor" from CDC spec 5.2.3.3 */
-struct call_mgmt_descriptor {
- u8 bLength;
- u8 bDescriptorType;
- u8 bDescriptorSubType;
-
- u8 bmCapabilities;
- u8 bDataInterface;
-} __attribute__ ((packed));
-
-static const struct call_mgmt_descriptor call_mgmt_descriptor = {
- .bLength = sizeof call_mgmt_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = 0x01,
+static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
+ .bLength = sizeof call_mgmt_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
- .bmCapabilities = 0x00,
- .bDataInterface = 0x01,
+ .bmCapabilities = 0x00,
+ .bDataInterface = 0x01,
};
+static const struct usb_cdc_acm_descriptor acm_descriptor = {
+ .bLength = sizeof acm_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ACM_TYPE,
-/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.4 */
-struct acm_descriptor {
- u8 bLength;
- u8 bDescriptorType;
- u8 bDescriptorSubType;
-
- u8 bmCapabilities;
-} __attribute__ ((packed));
-
-static struct acm_descriptor acm_descriptor = {
- .bLength = sizeof acm_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = 0x02,
-
- .bmCapabilities = 0X00,
+ .bmCapabilities = 0x00,
};
#endif
#ifdef DEV_CONFIG_CDC
-/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */
-struct ether_desc {
- u8 bLength;
- u8 bDescriptorType;
- u8 bDescriptorSubType;
-
- u8 iMACAddress;
- u32 bmEthernetStatistics;
- u16 wMaxSegmentSize;
- u16 wNumberMCFilters;
- u8 bNumberPowerFilters;
-} __attribute__ ((packed));
-
-static const struct ether_desc ether_desc = {
+static const struct usb_cdc_ether_desc ether_desc = {
.bLength = sizeof ether_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = 0x0f,
+ .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
/* this descriptor actually adds value, surprise! */
.iMACAddress = STRING_ETHADDR,
#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
/* include the status endpoint if we can, even where it's optional.
- * use small wMaxPacketSize, since many "interrupt" endpoints have
- * very small fifos and it's no big deal if CDC_NOTIFY_SPEED_CHANGE
- * takes two packets. also default to a big transfer interval, to
+ * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancellation; and a big transfer interval, to
* waste less bandwidth.
*
* some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
* RNDIS requires the status endpoint, since it uses that encapsulation
* mechanism for its funky RPC scheme.
*/
-
+
#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
-#define STATUS_BYTECOUNT 8 /* 8 byte header + data */
+#define STATUS_BYTECOUNT 16 /* 8 byte header + data */
static struct usb_endpoint_descriptor
fs_status_desc = {
#else
/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g,hs,fs) fs
+#define ep_desc(g,hs,fs) (((void)(g)), (fs))
static inline void __init hs_subset_descriptors(void)
{
/* descriptors that are built on-demand */
-static char manufacturer [40];
+static char manufacturer [50];
static char product_desc [40] = DRIVER_DESC;
+static char serial_number [20];
#ifdef DEV_CONFIG_CDC
/* address that the host will use ... usually assigned at random */
static char ethaddr [2 * ETH_ALEN + 1];
#endif
-/* static strings, in iso 8859/1 */
+/* static strings, in UTF-8 */
static struct usb_string strings [] = {
{ STRING_MANUFACTURER, manufacturer, },
{ STRING_PRODUCT, product_desc, },
+ { STRING_SERIALNUMBER, serial_number, },
{ STRING_DATA, "Ethernet Data", },
#ifdef DEV_CONFIG_CDC
{ STRING_CDC, "CDC Ethernet", },
if (type == USB_DT_OTHER_SPEED_CONFIG)
hs = !hs;
-#define which_fn(t) (hs ? & hs_ ## t ## _function : & fs_ ## t ## _function)
+#define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
#else
-#define which_fn(t) (& fs_ ## t ## _function)
+#define which_fn(t) (fs_ ## t ## _function)
#endif
if (index >= device_desc.bNumConfigurations)
*/
if (device_desc.bNumConfigurations == 2 && index == 0) {
config = &rndis_config;
- function = (const struct usb_descriptor_header **)
- which_fn (rndis);
+ function = which_fn (rndis);
} else
#endif
{
config = ð_config;
- function = (const struct usb_descriptor_header **)
- which_fn (eth);
+ function = which_fn (eth);
}
/* for now, don't advertise srp-only devices */
/*-------------------------------------------------------------------------*/
-static void eth_start (struct eth_dev *dev, int gfp_flags);
-static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags);
+static void eth_start (struct eth_dev *dev, gfp_t gfp_flags);
+static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
-#ifdef DEV_CONFIG_CDC
-static inline int ether_alt_ep_setup (struct eth_dev *dev, struct usb_ep *ep)
+static int
+set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
{
- const struct usb_endpoint_descriptor *d;
+ int result = 0;
+ struct usb_gadget *gadget = dev->gadget;
+
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+ /* status endpoint used for RNDIS and (optionally) CDC */
+ if (!subset_active(dev) && dev->status_ep) {
+ dev->status = ep_desc (gadget, &hs_status_desc,
+ &fs_status_desc);
+ dev->status_ep->driver_data = dev;
+
+ result = usb_ep_enable (dev->status_ep, dev->status);
+ if (result != 0) {
+ DEBUG (dev, "enable %s --> %d\n",
+ dev->status_ep->name, result);
+ goto done;
+ }
+ }
+#endif
+
+ dev->in = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc);
+ dev->in_ep->driver_data = dev;
+
+ dev->out = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc);
+ dev->out_ep->driver_data = dev;
/* With CDC, the host isn't allowed to use these two data
* endpoints in the default altsetting for the interface.
* a side effect of setting a packet filter. Deactivation is
* from REMOTE_NDIS_HALT_MSG, reset from REMOTE_NDIS_RESET_MSG.
*/
-
- /* one endpoint writes data back IN to the host */
- if (strcmp (ep->name, EP_IN_NAME) == 0) {
- d = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc);
- ep->driver_data = dev;
- dev->in_ep = ep;
- dev->in = d;
-
- /* one endpoint just reads OUT packets */
- } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc);
- ep->driver_data = dev;
- dev->out_ep = ep;
- dev->out = d;
-
- /* optional status/notification endpoint */
- } else if (EP_STATUS_NAME &&
- strcmp (ep->name, EP_STATUS_NAME) == 0) {
- int result;
-
- d = ep_desc (dev->gadget, &hs_status_desc, &fs_status_desc);
- result = usb_ep_enable (ep, d);
- if (result < 0)
- return result;
-
- ep->driver_data = dev;
- dev->status_ep = ep;
- dev->status = d;
- }
- return 0;
-}
-#endif
-
-#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
-static inline int ether_ep_setup (struct eth_dev *dev, struct usb_ep *ep)
-{
- int result;
- const struct usb_endpoint_descriptor *d;
-
- /* CDC subset is simpler: if the device is there,
- * it's live with rx and tx endpoints.
- *
- * Do this as a shortcut for RNDIS too.
- */
-
- /* one endpoint writes data back IN to the host */
- if (strcmp (ep->name, EP_IN_NAME) == 0) {
- d = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable (ep, d);
- if (result < 0)
- return result;
-
- ep->driver_data = dev;
- dev->in_ep = ep;
- dev->in = d;
-
- /* one endpoint just reads OUT packets */
- } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable (ep, d);
- if (result < 0)
- return result;
-
- ep->driver_data = dev;
- dev->out_ep = ep;
- dev->out = d;
- }
-
- return 0;
-}
-#endif
-
-static int
-set_ether_config (struct eth_dev *dev, int gfp_flags)
-{
- int result = 0;
- struct usb_ep *ep;
- struct usb_gadget *gadget = dev->gadget;
-
- gadget_for_each_ep (ep, gadget) {
-#ifdef DEV_CONFIG_CDC
- if (!dev->rndis && dev->cdc) {
- result = ether_alt_ep_setup (dev, ep);
- if (result == 0)
- continue;
+ if (!cdc_active(dev)) {
+ result = usb_ep_enable (dev->in_ep, dev->in);
+ if (result != 0) {
+ DEBUG(dev, "enable %s --> %d\n",
+ dev->in_ep->name, result);
+ goto done;
}
-#endif
-
-#ifdef CONFIG_USB_ETH_RNDIS
- if (dev->rndis && strcmp (ep->name, EP_STATUS_NAME) == 0) {
- const struct usb_endpoint_descriptor *d;
- d = ep_desc (gadget, &hs_status_desc, &fs_status_desc);
- result = usb_ep_enable (ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- dev->status_ep = ep;
- dev->status = d;
- continue;
- }
- } else
-#endif
- {
-#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
- result = ether_ep_setup (dev, ep);
- if (result == 0)
- continue;
-#endif
+ result = usb_ep_enable (dev->out_ep, dev->out);
+ if (result != 0) {
+ DEBUG (dev, "enable %s --> %d\n",
+ dev->out_ep->name, result);
+ goto done;
}
-
- /* stop on error */
- ERROR (dev, "can't enable %s, result %d\n", ep->name, result);
- break;
}
- if (!result && (!dev->in_ep || !dev->out_ep))
- result = -ENODEV;
+done:
if (result == 0)
result = alloc_requests (dev, qlen (gadget), gfp_flags);
/* on error, disable any endpoints */
if (result < 0) {
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- if (dev->status_ep)
+ if (!subset_active(dev))
(void) usb_ep_disable (dev->status_ep);
-#endif
- dev->status_ep = NULL;
dev->status = NULL;
-#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
- if (dev->rndis || !dev->cdc) {
- if (dev->in_ep)
- (void) usb_ep_disable (dev->in_ep);
- if (dev->out_ep)
- (void) usb_ep_disable (dev->out_ep);
- }
-#endif
- dev->in_ep = NULL;
+ (void) usb_ep_disable (dev->in_ep);
+ (void) usb_ep_disable (dev->out_ep);
dev->in = NULL;
- dev->out_ep = NULL;
dev->out = NULL;
} else
/* activate non-CDC configs right away
* this isn't strictly according to the RNDIS spec
*/
-#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
- if (dev->rndis || !dev->cdc) {
+ if (!cdc_active (dev)) {
netif_carrier_on (dev->net);
if (netif_running (dev->net)) {
spin_unlock (&dev->lock);
spin_lock (&dev->lock);
}
}
-#endif
if (result == 0)
DEBUG (dev, "qlen %d\n", qlen (gadget));
netif_stop_queue (dev->net);
netif_carrier_off (dev->net);
+ rndis_uninit(dev->rndis_config);
/* disable endpoints, forcing (synchronous) completion of
* pending i/o. then free the requests.
*/
- if (dev->in_ep) {
+ if (dev->in) {
usb_ep_disable (dev->in_ep);
+ spin_lock(&dev->req_lock);
while (likely (!list_empty (&dev->tx_reqs))) {
req = container_of (dev->tx_reqs.next,
struct usb_request, list);
list_del (&req->list);
+
+ spin_unlock(&dev->req_lock);
usb_ep_free_request (dev->in_ep, req);
+ spin_lock(&dev->req_lock);
}
- dev->in_ep = NULL;
+ spin_unlock(&dev->req_lock);
}
- if (dev->out_ep) {
+ if (dev->out) {
usb_ep_disable (dev->out_ep);
+ spin_lock(&dev->req_lock);
while (likely (!list_empty (&dev->rx_reqs))) {
req = container_of (dev->rx_reqs.next,
struct usb_request, list);
list_del (&req->list);
+
+ spin_unlock(&dev->req_lock);
usb_ep_free_request (dev->out_ep, req);
+ spin_lock(&dev->req_lock);
}
- dev->out_ep = NULL;
+ spin_unlock(&dev->req_lock);
}
- if (dev->status_ep) {
+ if (dev->status) {
usb_ep_disable (dev->status_ep);
- dev->status_ep = NULL;
}
+ dev->rndis = 0;
+ dev->cdc_filter = 0;
dev->config = 0;
}
* that returns config descriptors, and altsetting code.
*/
static int
-eth_set_config (struct eth_dev *dev, unsigned number, int gfp_flags)
+eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
- if (number == dev->config)
- return 0;
-
if (gadget_is_sa1100 (gadget)
&& dev->config
&& atomic_read (&dev->tx_qlen) != 0) {
}
eth_reset_config (dev);
- /* default: pass all packets, no multicast filtering */
- dev->cdc_filter = 0x000f;
-
switch (number) {
case DEV_CONFIG_VALUE:
- dev->rndis = 0;
result = set_ether_config (dev, gfp_flags);
break;
#ifdef CONFIG_USB_ETH_RNDIS
result = -EINVAL;
/* FALL THROUGH */
case 0:
- return result;
+ break;
}
- if (result)
- eth_reset_config (dev);
- else {
+ if (result) {
+ if (number)
+ eth_reset_config (dev);
+ usb_gadget_vbus_draw(dev->gadget,
+ dev->gadget->is_otg ? 8 : 100);
+ } else {
char *speed;
+ unsigned power;
+
+ power = 2 * eth_config.bMaxPower;
+ usb_gadget_vbus_draw(dev->gadget, power);
switch (gadget->speed) {
case USB_SPEED_FULL: speed = "full"; break;
#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_SPEED_HIGH: speed = "high"; break;
#endif
- default: speed = "?"; break;
+ default: speed = "?"; break;
}
dev->config = number;
- INFO (dev, "%s speed config #%d: %s, using %s\n",
- speed, number, driver_desc,
- dev->rndis
+ INFO (dev, "%s speed config #%d: %d mA, %s, using %s\n",
+ speed, number, power, driver_desc,
+ rndis_active(dev)
? "RNDIS"
- : (dev->cdc
+ : (cdc_active(dev)
? "CDC Ethernet"
: "CDC Ethernet Subset"));
}
/*-------------------------------------------------------------------------*/
-/* section 3.8.2 table 11 of the CDC spec lists Ethernet notifications
- * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS
- * and RNDIS also defines its own bit-incompatible notifications
- */
-#define CDC_NOTIFY_NETWORK_CONNECTION 0x00 /* required; 6.3.1 */
-#define CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 /* optional; 6.3.2 */
-#define CDC_NOTIFY_SPEED_CHANGE 0x2a /* required; 6.3.8 */
-
#ifdef DEV_CONFIG_CDC
-struct cdc_notification {
- u8 bmRequestType;
- u8 bNotificationType;
- u16 wValue;
- u16 wIndex;
- u16 wLength;
-
- /* SPEED_CHANGE data looks like this */
- u32 data [2];
-};
+/* The interrupt endpoint is used in CDC networking models (Ethernet, ATM)
+ * only to notify the host about link status changes (which we support) or
+ * report completion of some encapsulated command (as used in RNDIS). Since
+ * we want this CDC Ethernet code to be vendor-neutral, we don't use that
+ * command mechanism; and only one status request is ever queued.
+ */
static void eth_status_complete (struct usb_ep *ep, struct usb_request *req)
{
- struct cdc_notification *event = req->buf;
- int value = req->status;
- struct eth_dev *dev = ep->driver_data;
+ struct usb_cdc_notification *event = req->buf;
+ int value = req->status;
+ struct eth_dev *dev = ep->driver_data;
/* issue the second notification if host reads the first */
- if (event->bNotificationType == CDC_NOTIFY_NETWORK_CONNECTION
+ if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION
&& value == 0) {
+ __le32 *data = req->buf + sizeof *event;
+
event->bmRequestType = 0xA1;
- event->bNotificationType = CDC_NOTIFY_SPEED_CHANGE;
+ event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
event->wValue = __constant_cpu_to_le16 (0);
event->wIndex = __constant_cpu_to_le16 (1);
event->wLength = __constant_cpu_to_le16 (8);
/* SPEED_CHANGE data is up/down speeds in bits/sec */
- event->data [0] = event->data [1] =
- (dev->gadget->speed == USB_SPEED_HIGH)
- ? (13 * 512 * 8 * 1000 * 8)
- : (19 * 64 * 1 * 1000 * 8);
+ data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget));
- req->length = 16;
+ req->length = STATUS_BYTECOUNT;
value = usb_ep_queue (ep, req, GFP_ATOMIC);
DEBUG (dev, "send SPEED_CHANGE --> %d\n", value);
if (value == 0)
return;
- } else
+ } else if (value != -ECONNRESET)
DEBUG (dev, "event %02x --> %d\n",
event->bNotificationType, value);
-
- /* free when done */
- usb_ep_free_buffer (ep, req->buf, req->dma, 16);
- usb_ep_free_request (ep, req);
+ req->context = NULL;
}
static void issue_start_status (struct eth_dev *dev)
{
- struct usb_request *req;
- struct cdc_notification *event;
- int value;
-
+ struct usb_request *req = dev->stat_req;
+ struct usb_cdc_notification *event;
+ int value;
+
DEBUG (dev, "%s, flush old status first\n", __FUNCTION__);
/* flush old status
* a "cancel the whole queue" primitive since any
* unlink-one primitive has way too many error modes.
* here, we "know" toggle is already clear...
+ *
+ * FIXME iff req->context != null just dequeue it
*/
usb_ep_disable (dev->status_ep);
usb_ep_enable (dev->status_ep, dev->status);
- /* FIXME make these allocations static like dev->req */
- req = usb_ep_alloc_request (dev->status_ep, GFP_ATOMIC);
- if (req == 0) {
- DEBUG (dev, "status ENOMEM\n");
- return;
- }
- req->buf = usb_ep_alloc_buffer (dev->status_ep, 16,
- &dev->req->dma, GFP_ATOMIC);
- if (req->buf == 0) {
- DEBUG (dev, "status buf ENOMEM\n");
-free_req:
- usb_ep_free_request (dev->status_ep, req);
- return;
- }
-
/* 3.8.1 says to issue first NETWORK_CONNECTION, then
* a SPEED_CHANGE. could be useful in some configs.
*/
event = req->buf;
event->bmRequestType = 0xA1;
- event->bNotificationType = CDC_NOTIFY_NETWORK_CONNECTION;
+ event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
event->wValue = __constant_cpu_to_le16 (1); /* connected */
event->wIndex = __constant_cpu_to_le16 (1);
event->wLength = 0;
- req->length = 8;
+ req->length = sizeof *event;
req->complete = eth_status_complete;
+ req->context = dev;
+
value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC);
- if (value < 0) {
+ if (value < 0)
DEBUG (dev, "status buf queue --> %d\n", value);
- usb_ep_free_buffer (dev->status_ep,
- req->buf, dev->req->dma, 16);
- goto free_req;
- }
}
#endif
req->status, req->actual, req->length);
}
-/* see section 3.8.2 table 10 of the CDC spec for more ethernet
- * requests, mostly for filters (multicast, pm) and statistics
- * section 3.6.2.1 table 4 has ACM requests; RNDIS requires the
- * encapsulated command mechanism.
- */
-#define CDC_SEND_ENCAPSULATED_COMMAND 0x00 /* optional */
-#define CDC_GET_ENCAPSULATED_RESPONSE 0x01 /* optional */
-#define CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 /* optional */
-#define CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 /* optional */
-#define CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 /* optional */
-#define CDC_SET_ETHERNET_PACKET_FILTER 0x43 /* required */
-#define CDC_GET_ETHERNET_STATISTIC 0x44 /* optional */
-
-/* table 62; bits in cdc_filter */
-#define CDC_PACKET_TYPE_PROMISCUOUS (1 << 0)
-#define CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */
-#define CDC_PACKET_TYPE_DIRECTED (1 << 2)
-#define CDC_PACKET_TYPE_BROADCAST (1 << 3)
-#define CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */
-
#ifdef CONFIG_USB_ETH_RNDIS
static void rndis_response_complete (struct usb_ep *ep, struct usb_request *req)
{
if (req->status || req->actual != req->length)
- DEBUG (dev, "rndis response complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
+ DEBUG ((struct eth_dev *) ep->driver_data,
+ "rndis response complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
- /* done sending after CDC_GET_ENCAPSULATED_RESPONSE */
+ /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */
}
static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req)
{
struct eth_dev *dev = ep->driver_data;
int status;
-
- /* received RNDIS command from CDC_SEND_ENCAPSULATED_COMMAND */
+
+ /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
spin_lock(&dev->lock);
status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf);
if (status < 0)
struct eth_dev *dev = get_gadget_data (gadget);
struct usb_request *req = dev->req;
int value = -EOPNOTSUPP;
+ u16 wIndex = le16_to_cpu(ctrl->wIndex);
+ u16 wValue = le16_to_cpu(ctrl->wValue);
+ u16 wLength = le16_to_cpu(ctrl->wLength);
/* descriptors just go into the pre-allocated ep0 buffer,
* while config change events may enable network traffic.
case USB_REQ_GET_DESCRIPTOR:
if (ctrl->bRequestType != USB_DIR_IN)
break;
- switch (ctrl->wValue >> 8) {
+ switch (wValue >> 8) {
case USB_DT_DEVICE:
- value = min (ctrl->wLength, (u16) sizeof device_desc);
+ value = min (wLength, (u16) sizeof device_desc);
memcpy (req->buf, &device_desc, value);
break;
#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
if (!gadget->is_dualspeed)
break;
- value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
+ value = min (wLength, (u16) sizeof dev_qualifier);
memcpy (req->buf, &dev_qualifier, value);
break;
#endif /* CONFIG_USB_GADGET_DUALSPEED */
case USB_DT_CONFIG:
value = config_buf (gadget->speed, req->buf,
- ctrl->wValue >> 8,
- ctrl->wValue & 0xff,
+ wValue >> 8,
+ wValue & 0xff,
gadget->is_otg);
if (value >= 0)
- value = min (ctrl->wLength, (u16) value);
+ value = min (wLength, (u16) value);
break;
case USB_DT_STRING:
value = usb_gadget_get_string (&stringtab,
- ctrl->wValue & 0xff, req->buf);
+ wValue & 0xff, req->buf);
if (value >= 0)
- value = min (ctrl->wLength, (u16) value);
+ value = min (wLength, (u16) value);
break;
}
break;
else if (gadget->a_alt_hnp_support)
DEBUG (dev, "HNP needs a different root port\n");
spin_lock (&dev->lock);
- value = eth_set_config (dev, ctrl->wValue, GFP_ATOMIC);
+ value = eth_set_config (dev, wValue, GFP_ATOMIC);
spin_unlock (&dev->lock);
break;
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != USB_DIR_IN)
break;
*(u8 *)req->buf = dev->config;
- value = min (ctrl->wLength, (u16) 1);
+ value = min (wLength, (u16) 1);
break;
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != USB_RECIP_INTERFACE
|| !dev->config
- || ctrl->wIndex > 1)
+ || wIndex > 1)
break;
- if (!dev->cdc && ctrl->wIndex != 0)
+ if (!cdc_active(dev) && wIndex != 0)
break;
spin_lock (&dev->lock);
}
#ifdef DEV_CONFIG_CDC
- switch (ctrl->wIndex) {
+ switch (wIndex) {
case 0: /* control/master intf */
- if (ctrl->wValue != 0)
+ if (wValue != 0)
break;
- if (dev->status_ep) {
+ if (dev->status) {
usb_ep_disable (dev->status_ep);
usb_ep_enable (dev->status_ep, dev->status);
}
value = 0;
break;
case 1: /* data intf */
- if (ctrl->wValue > 1)
+ if (wValue > 1)
break;
usb_ep_disable (dev->in_ep);
usb_ep_disable (dev->out_ep);
/* CDC requires the data transfers not be done from
* the default interface setting ... also, setting
- * the non-default interface clears filters etc.
+ * the non-default interface resets filters etc.
*/
- if (ctrl->wValue == 1) {
+ if (wValue == 1) {
+ if (!cdc_active (dev))
+ break;
usb_ep_enable (dev->in_ep, dev->in);
usb_ep_enable (dev->out_ep, dev->out);
+ dev->cdc_filter = DEFAULT_FILTER;
netif_carrier_on (dev->net);
- if (dev->status_ep)
+ if (dev->status)
issue_start_status (dev);
if (netif_running (dev->net)) {
spin_unlock (&dev->lock);
case USB_REQ_GET_INTERFACE:
if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
|| !dev->config
- || ctrl->wIndex > 1)
+ || wIndex > 1)
break;
- if (!(dev->cdc || dev->rndis) && ctrl->wIndex != 0)
+ if (!(cdc_active(dev) || rndis_active(dev)) && wIndex != 0)
break;
/* for CDC, iff carrier is on, data interface is active. */
- if (dev->rndis || ctrl->wIndex != 1)
+ if (rndis_active(dev) || wIndex != 1)
*(u8 *)req->buf = 0;
else
*(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0;
- value = min (ctrl->wLength, (u16) 1);
+ value = min (wLength, (u16) 1);
break;
#ifdef DEV_CONFIG_CDC
- case CDC_SET_ETHERNET_PACKET_FILTER:
+ case USB_CDC_SET_ETHERNET_PACKET_FILTER:
/* see 6.2.30: no data, wIndex = interface,
* wValue = packet filter bitmap
*/
if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- || !dev->cdc
- || dev->rndis
- || ctrl->wLength != 0
- || ctrl->wIndex > 1)
+ || !cdc_active(dev)
+ || wLength != 0
+ || wIndex > 1)
break;
- DEBUG (dev, "NOP packet filter %04x\n", ctrl->wValue);
- /* NOTE: table 62 has 5 filter bits to reduce traffic,
- * and we "must" support multicast and promiscuous.
- * this NOP implements a bad filter (always promisc)
- */
- dev->cdc_filter = ctrl->wValue;
+ DEBUG (dev, "packet filter %02x\n", wValue);
+ dev->cdc_filter = wValue;
value = 0;
break;
+
+ /* and potentially:
+ * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+ * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_STATISTIC:
+ */
+
#endif /* DEV_CONFIG_CDC */
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_ETH_RNDIS
/* RNDIS uses the CDC command encapsulation mechanism to implement
* an RPC scheme, with much getting/setting of attributes by OID.
*/
- case CDC_SEND_ENCAPSULATED_COMMAND:
+ case USB_CDC_SEND_ENCAPSULATED_COMMAND:
if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- || !dev->rndis
- || ctrl->wLength > USB_BUFSIZ
- || ctrl->wValue
+ || !rndis_active(dev)
+ || wLength > USB_BUFSIZ
+ || wValue
|| rndis_control_intf.bInterfaceNumber
- != ctrl->wIndex)
+ != wIndex)
break;
/* read the request, then process it */
- value = ctrl->wLength;
+ value = wLength;
req->complete = rndis_command_complete;
/* later, rndis_control_ack () sends a notification */
break;
-
- case CDC_GET_ENCAPSULATED_RESPONSE:
+
+ case USB_CDC_GET_ENCAPSULATED_RESPONSE:
if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)
== ctrl->bRequestType
- && dev->rndis
- // && ctrl->wLength >= 0x0400
- && !ctrl->wValue
+ && rndis_active(dev)
+ // && wLength >= 0x0400
+ && !wValue
&& rndis_control_intf.bInterfaceNumber
- == ctrl->wIndex) {
+ == wIndex) {
u8 *buf;
/* return the result */
VDEBUG (dev,
"unknown control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
- ctrl->wValue, ctrl->wIndex, ctrl->wLength);
+ wValue, wIndex, wLength);
}
/* respond with data transfer before status phase? */
if (value >= 0) {
req->length = value;
- req->zero = value < ctrl->wLength
+ req->zero = value < wLength
&& (value % gadget->ep0->maxpacket) == 0;
value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
if (value < 0) {
static int eth_change_mtu (struct net_device *net, int new_mtu)
{
- struct eth_dev *dev = (struct eth_dev *) net->priv;
+ struct eth_dev *dev = netdev_priv(net);
- // FIXME if rndis, don't change while link's live
+ if (dev->rndis)
+ return -EBUSY;
if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
return -ERANGE;
static struct net_device_stats *eth_get_stats (struct net_device *net)
{
- return &((struct eth_dev *) net->priv)->stats;
+ return &((struct eth_dev *)netdev_priv(net))->stats;
}
-static int eth_ethtool_ioctl (struct net_device *net, void __user *useraddr)
+static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
{
- struct eth_dev *dev = (struct eth_dev *) net->priv;
- u32 cmd;
-
- if (get_user (cmd, (u32 __user *)useraddr))
- return -EFAULT;
- switch (cmd) {
-
- case ETHTOOL_GDRVINFO: { /* get driver info */
- struct ethtool_drvinfo info;
-
- memset (&info, 0, sizeof info);
- info.cmd = ETHTOOL_GDRVINFO;
- strlcpy (info.driver, shortname, sizeof info.driver);
- strlcpy (info.version, DRIVER_VERSION, sizeof info.version);
- strlcpy (info.fw_version, dev->gadget->name,
- sizeof info.fw_version);
- strlcpy (info.bus_info, dev->gadget->dev.bus_id,
- sizeof info.bus_info);
- if (copy_to_user (useraddr, &info, sizeof (info)))
- return -EFAULT;
- return 0;
- }
-
- case ETHTOOL_GLINK: { /* get link status */
- struct ethtool_value edata = { ETHTOOL_GLINK };
-
- edata.data = (dev->gadget->speed != USB_SPEED_UNKNOWN);
- if (copy_to_user (useraddr, &edata, sizeof (edata)))
- return -EFAULT;
- return 0;
- }
-
- }
- /* Note that the ethtool user space code requires EOPNOTSUPP */
- return -EOPNOTSUPP;
+ struct eth_dev *dev = netdev_priv(net);
+ strlcpy(p->driver, shortname, sizeof p->driver);
+ strlcpy(p->version, DRIVER_VERSION, sizeof p->version);
+ strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version);
+ strlcpy (p->bus_info, dev->gadget->dev.bus_id, sizeof p->bus_info);
}
-static int eth_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+static u32 eth_get_link(struct net_device *net)
{
- switch (cmd) {
- case SIOCETHTOOL:
- return eth_ethtool_ioctl(net, rq->ifr_data);
- default:
- return -EOPNOTSUPP;
- }
+ struct eth_dev *dev = netdev_priv(net);
+ return dev->gadget->speed != USB_SPEED_UNKNOWN;
}
+static struct ethtool_ops ops = {
+ .get_drvinfo = eth_get_drvinfo,
+ .get_link = eth_get_link
+};
+
static void defer_kevent (struct eth_dev *dev, int flag)
{
if (test_and_set_bit (flag, &dev->todo))
static void rx_complete (struct usb_ep *ep, struct usb_request *req);
static int
-rx_submit (struct eth_dev *dev, struct usb_request *req, int gfp_flags)
+rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
{
struct sk_buff *skb;
int retval = -ENOMEM;
*/
size = (sizeof (struct ethhdr) + dev->net->mtu + RX_EXTRA);
size += dev->out_ep->maxpacket - 1;
-#ifdef CONFIG_USB_ETH_RNDIS
- if (dev->rndis)
+ if (rndis_active(dev))
size += sizeof (struct rndis_packet_msg_type);
-#endif
size -= size % dev->out_ep->maxpacket;
- if ((skb = alloc_skb (size, gfp_flags)) == 0) {
+ if ((skb = alloc_skb (size + NET_IP_ALIGN, gfp_flags)) == 0) {
DEBUG (dev, "no rx skb\n");
goto enomem;
}
+ /* Some platforms perform better when IP packets are aligned,
+ * but on at least one, checksumming fails otherwise. Note:
+ * RNDIS headers involve variable numbers of LE32 values.
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
req->buf = skb->data;
req->length = size;
req->complete = rx_complete;
if (retval) {
DEBUG (dev, "rx submit --> %d\n", retval);
dev_kfree_skb_any (skb);
- spin_lock (&dev->lock);
+ spin_lock(&dev->req_lock);
list_add (&req->list, &dev->rx_reqs);
- spin_unlock (&dev->lock);
+ spin_unlock(&dev->req_lock);
}
return retval;
}
/* normal completion */
case 0:
skb_put (skb, req->actual);
-#ifdef CONFIG_USB_ETH_RNDIS
/* we know MaxPacketsPerTransfer == 1 here */
- if (dev->rndis)
- rndis_rm_hdr (req->buf, &(skb->len));
-#endif
- if (ETH_HLEN > skb->len || skb->len > ETH_FRAME_LEN) {
+ if (rndis_active(dev))
+ status = rndis_rm_hdr (skb);
+ if (status < 0
+ || ETH_HLEN > skb->len
+ || skb->len > ETH_FRAME_LEN) {
dev->stats.rx_errors++;
dev->stats.rx_length_errors++;
DEBUG (dev, "rx length %d\n", skb->len);
case -EOVERFLOW:
dev->stats.rx_over_errors++;
// FALLTHROUGH
-
+
default:
dev->stats.rx_errors++;
DEBUG (dev, "rx status %d\n", status);
dev_kfree_skb_any (skb);
if (!netif_running (dev->net)) {
clean:
- /* nobody reading rx_reqs, so no dev->lock */
+ spin_lock(&dev->req_lock);
list_add (&req->list, &dev->rx_reqs);
+ spin_unlock(&dev->req_lock);
req = NULL;
}
if (req)
}
static int prealloc (struct list_head *list, struct usb_ep *ep,
- unsigned n, int gfp_flags)
+ unsigned n, gfp_t gfp_flags)
{
unsigned i;
struct usb_request *req;
return 0;
}
-static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags)
+static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
{
int status;
+ spin_lock(&dev->req_lock);
status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
if (status < 0)
goto fail;
status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
if (status < 0)
goto fail;
- return 0;
+ goto done;
fail:
DEBUG (dev, "can't alloc requests\n");
+done:
+ spin_unlock(&dev->req_lock);
return status;
}
-static void rx_fill (struct eth_dev *dev, int gfp_flags)
+static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags)
{
struct usb_request *req;
unsigned long flags;
- clear_bit (WORK_RX_MEMORY, &dev->todo);
-
/* fill unused rxq slots with some skb */
- spin_lock_irqsave (&dev->lock, flags);
+ spin_lock_irqsave(&dev->req_lock, flags);
while (!list_empty (&dev->rx_reqs)) {
req = container_of (dev->rx_reqs.next,
struct usb_request, list);
list_del_init (&req->list);
- spin_unlock_irqrestore (&dev->lock, flags);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
if (rx_submit (dev, req, gfp_flags) < 0) {
defer_kevent (dev, WORK_RX_MEMORY);
return;
}
- spin_lock_irqsave (&dev->lock, flags);
+ spin_lock_irqsave(&dev->req_lock, flags);
}
- spin_unlock_irqrestore (&dev->lock, flags);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
}
-static void eth_work (void *_dev)
+static void eth_work (struct work_struct *work)
{
- struct eth_dev *dev = _dev;
+ struct eth_dev *dev = container_of(work, struct eth_dev, work);
- if (test_bit (WORK_RX_MEMORY, &dev->todo)) {
+ if (test_and_clear_bit (WORK_RX_MEMORY, &dev->todo)) {
if (netif_running (dev->net))
rx_fill (dev, GFP_KERNEL);
- else
- clear_bit (WORK_RX_MEMORY, &dev->todo);
}
if (dev->todo)
}
dev->stats.tx_packets++;
- spin_lock (&dev->lock);
+ spin_lock(&dev->req_lock);
list_add (&req->list, &dev->tx_reqs);
- spin_unlock (&dev->lock);
+ spin_unlock(&dev->req_lock);
dev_kfree_skb_any (skb);
atomic_dec (&dev->tx_qlen);
netif_wake_queue (dev->net);
}
+static inline int eth_is_promisc (struct eth_dev *dev)
+{
+ /* no filters for the CDC subset; always promisc */
+ if (subset_active (dev))
+ return 1;
+ return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
+}
+
static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
{
- struct eth_dev *dev = (struct eth_dev *) net->priv;
+ struct eth_dev *dev = netdev_priv(net);
int length = skb->len;
int retval;
struct usb_request *req = NULL;
unsigned long flags;
- /* FIXME check dev->cdc_filter to decide whether to send this,
- * instead of acting as if CDC_PACKET_TYPE_PROMISCUOUS were
- * always set. RNDIS has the same kind of outgoing filter.
- */
+ /* apply outgoing CDC or RNDIS filters */
+ if (!eth_is_promisc (dev)) {
+ u8 *dest = skb->data;
- spin_lock_irqsave (&dev->lock, flags);
+ if (is_multicast_ether_addr(dest)) {
+ u16 type;
+
+ /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
+ * SET_ETHERNET_MULTICAST_FILTERS requests
+ */
+ if (is_broadcast_ether_addr(dest))
+ type = USB_CDC_PACKET_TYPE_BROADCAST;
+ else
+ type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+ if (!(dev->cdc_filter & type)) {
+ dev_kfree_skb_any (skb);
+ return 0;
+ }
+ }
+ /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
+ }
+
+ spin_lock_irqsave(&dev->req_lock, flags);
req = container_of (dev->tx_reqs.next, struct usb_request, list);
list_del (&req->list);
if (list_empty (&dev->tx_reqs))
netif_stop_queue (net);
- spin_unlock_irqrestore (&dev->lock, flags);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
/* no buffer copies needed, unless the network stack did it
* or the hardware can't use skb buffers.
* or there's not enough space for any RNDIS headers we need
*/
-#ifdef CONFIG_USB_ETH_RNDIS
- if (dev->rndis) {
+ if (rndis_active(dev)) {
struct sk_buff *skb_rndis;
skb_rndis = skb_realloc_headroom (skb,
sizeof (struct rndis_packet_msg_type));
if (!skb_rndis)
goto drop;
-
+
dev_kfree_skb_any (skb);
skb = skb_rndis;
rndis_add_hdr (skb);
length = skb->len;
}
-#endif
req->buf = skb->data;
req->context = skb;
req->complete = tx_complete;
}
if (retval) {
-#ifdef CONFIG_USB_ETH_RNDIS
drop:
-#endif
dev->stats.tx_dropped++;
dev_kfree_skb_any (skb);
- spin_lock_irqsave (&dev->lock, flags);
+ spin_lock_irqsave(&dev->req_lock, flags);
if (list_empty (&dev->tx_reqs))
netif_start_queue (net);
list_add (&req->list, &dev->tx_reqs);
- spin_unlock_irqrestore (&dev->lock, flags);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
}
return 0;
}
#ifdef CONFIG_USB_ETH_RNDIS
-static void rndis_send_media_state (struct eth_dev *dev, int connect)
-{
- if (!dev)
- return;
-
- if (connect) {
- if (rndis_signal_connect (dev->rndis_config))
- return;
- } else {
- if (rndis_signal_disconnect (dev->rndis_config))
- return;
- }
-}
+/* The interrupt endpoint is used in RNDIS to notify the host when messages
+ * other than data packets are available ... notably the REMOTE_NDIS_*_CMPLT
+ * messages, but also REMOTE_NDIS_INDICATE_STATUS_MSG and potentially even
+ * REMOTE_NDIS_KEEPALIVE_MSG.
+ *
+ * The RNDIS control queue is processed by GET_ENCAPSULATED_RESPONSE, and
+ * normally just one notification will be queued.
+ */
+
+static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, gfp_t);
+static void eth_req_free (struct usb_ep *ep, struct usb_request *req);
-static void rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req)
+static void
+rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req)
{
+ struct eth_dev *dev = ep->driver_data;
+
if (req->status || req->actual != req->length)
- DEBUG (dev, "rndis control ack complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
+ DEBUG (dev,
+ "rndis control ack complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+ req->context = NULL;
- usb_ep_free_buffer(ep, req->buf, req->dma, 8);
- usb_ep_free_request(ep, req);
+ if (req != dev->stat_req)
+ eth_req_free(ep, req);
}
static int rndis_control_ack (struct net_device *net)
{
- struct eth_dev *dev = (struct eth_dev *) net->priv;
- u32 length;
- struct usb_request *resp;
-
+ struct eth_dev *dev = netdev_priv(net);
+ int length;
+ struct usb_request *resp = dev->stat_req;
+
/* in case RNDIS calls this after disconnect */
- if (!dev->status_ep) {
+ if (!dev->status) {
DEBUG (dev, "status ENODEV\n");
return -ENODEV;
}
- /* Allocate memory for notification ie. ACK */
- resp = usb_ep_alloc_request (dev->status_ep, GFP_ATOMIC);
- if (!resp) {
- DEBUG (dev, "status ENOMEM\n");
- return -ENOMEM;
- }
-
- resp->buf = usb_ep_alloc_buffer (dev->status_ep, 8,
- &resp->dma, GFP_ATOMIC);
- if (!resp->buf) {
- DEBUG (dev, "status buf ENOMEM\n");
- usb_ep_free_request (dev->status_ep, resp);
- return -ENOMEM;
+ /* in case queue length > 1 */
+ if (resp->context) {
+ resp = eth_req_alloc (dev->status_ep, 8, GFP_ATOMIC);
+ if (!resp)
+ return -ENOMEM;
}
-
+
/* Send RNDIS RESPONSE_AVAILABLE notification;
- * CDC_NOTIFY_RESPONSE_AVAILABLE should work too
+ * USB_CDC_NOTIFY_RESPONSE_AVAILABLE should work too
*/
resp->length = 8;
resp->complete = rndis_control_ack_complete;
-
- *((u32 *) resp->buf) = __constant_cpu_to_le32 (1);
- *((u32 *) resp->buf + 1) = __constant_cpu_to_le32 (0);
-
+ resp->context = dev;
+
+ *((__le32 *) resp->buf) = __constant_cpu_to_le32 (1);
+ *((__le32 *) resp->buf + 1) = __constant_cpu_to_le32 (0);
+
length = usb_ep_queue (dev->status_ep, resp, GFP_ATOMIC);
if (length < 0) {
resp->status = 0;
rndis_control_ack_complete (dev->status_ep, resp);
}
-
+
return 0;
}
+#else
+
+#define rndis_control_ack NULL
+
#endif /* RNDIS */
-static void eth_start (struct eth_dev *dev, int gfp_flags)
+static void eth_start (struct eth_dev *dev, gfp_t gfp_flags)
{
DEBUG (dev, "%s\n", __FUNCTION__);
/* fill the rx queue */
rx_fill (dev, gfp_flags);
- /* and open the tx floodgates */
+ /* and open the tx floodgates */
atomic_set (&dev->tx_qlen, 0);
netif_wake_queue (dev->net);
-#ifdef CONFIG_USB_ETH_RNDIS
- if (dev->rndis) {
+ if (rndis_active(dev)) {
rndis_set_param_medium (dev->rndis_config,
NDIS_MEDIUM_802_3,
- BITRATE(dev->gadget));
- rndis_send_media_state (dev, 1);
+ BITRATE(dev->gadget)/100);
+ (void) rndis_signal_connect (dev->rndis_config);
}
-#endif
}
static int eth_open (struct net_device *net)
{
- struct eth_dev *dev = (struct eth_dev *) net->priv;
+ struct eth_dev *dev = netdev_priv(net);
DEBUG (dev, "%s\n", __FUNCTION__);
if (netif_carrier_ok (dev->net))
static int eth_stop (struct net_device *net)
{
- struct eth_dev *dev = (struct eth_dev *) net->priv;
+ struct eth_dev *dev = netdev_priv(net);
VDEBUG (dev, "%s\n", __FUNCTION__);
netif_stop_queue (net);
DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
- dev->stats.rx_packets, dev->stats.tx_packets,
+ dev->stats.rx_packets, dev->stats.tx_packets,
dev->stats.rx_errors, dev->stats.tx_errors
);
/* ensure there are no more active requests */
- if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
+ if (dev->config) {
usb_ep_disable (dev->in_ep);
usb_ep_disable (dev->out_ep);
if (netif_carrier_ok (dev->net)) {
usb_ep_enable (dev->status_ep, dev->status);
}
}
-
-#ifdef CONFIG_USB_ETH_RNDIS
- if (dev->rndis) {
+
+ if (rndis_active(dev)) {
rndis_set_param_medium (dev->rndis_config,
NDIS_MEDIUM_802_3, 0);
- rndis_send_media_state (dev, 0);
+ (void) rndis_signal_disconnect (dev->rndis_config);
}
-#endif
return 0;
}
/*-------------------------------------------------------------------------*/
+static struct usb_request *
+eth_req_alloc (struct usb_ep *ep, unsigned size, gfp_t gfp_flags)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request (ep, gfp_flags);
+ if (!req)
+ return NULL;
+
+ req->buf = kmalloc (size, gfp_flags);
+ if (!req->buf) {
+ usb_ep_free_request (ep, req);
+ req = NULL;
+ }
+ return req;
+}
+
static void
+eth_req_free (struct usb_ep *ep, struct usb_request *req)
+{
+ kfree (req->buf);
+ usb_ep_free_request (ep, req);
+}
+
+
+static void /* __init_or_exit */
eth_unbind (struct usb_gadget *gadget)
{
struct eth_dev *dev = get_gadget_data (gadget);
DEBUG (dev, "unbind\n");
-#ifdef CONFIG_USB_ETH_RNDIS
rndis_deregister (dev->rndis_config);
rndis_exit ();
-#endif
/* we've already been disconnected ... no i/o is active */
if (dev->req) {
- usb_ep_free_buffer (gadget->ep0,
- dev->req->buf, dev->req->dma,
- USB_BUFSIZ);
- usb_ep_free_request (gadget->ep0, dev->req);
+ eth_req_free (gadget->ep0, dev->req);
dev->req = NULL;
}
+ if (dev->stat_req) {
+ eth_req_free (dev->status_ep, dev->stat_req);
+ dev->stat_req = NULL;
+ }
unregister_netdev (dev->net);
free_netdev(dev->net);
set_gadget_data (gadget, NULL);
}
-static u8 __init nibble (unsigned char c)
+static u8 __devinit nibble (unsigned char c)
{
if (likely (isdigit (c)))
return c - '0';
return 0;
}
-static void __init get_ether_addr (const char *str, u8 *dev_addr)
+static int __devinit get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
unsigned i;
dev_addr [i] = num;
}
if (is_valid_ether_addr (dev_addr))
- return;
+ return 0;
}
random_ether_addr(dev_addr);
+ return 1;
}
-static int __init
+static int __devinit
eth_bind (struct usb_gadget *gadget)
{
struct eth_dev *dev;
struct net_device *net;
u8 cdc = 1, zlp = 1, rndis = 1;
- struct usb_ep *ep;
+ struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
int status = -ENOMEM;
+ int gcnum;
/* these flags are only ever cleared; compiler take note */
#ifndef DEV_CONFIG_CDC
* standard protocol is _strongly_ preferred for interop purposes.
* (By everyone except Microsoft.)
*/
- if (gadget_is_net2280 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
- } else if (gadget_is_dummy (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0202);
- } else if (gadget_is_pxa (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
+ if (gadget_is_pxa (gadget)) {
/* pxa doesn't support altsettings */
cdc = 0;
+ } else if (gadget_is_musbhdrc(gadget)) {
+ /* reduce tx dma overhead by avoiding special cases */
+ zlp = 0;
} else if (gadget_is_sh(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
/* sh doesn't support multiple interfaces or configs */
cdc = 0;
rndis = 0;
} else if (gadget_is_sa1100 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
/* hardware can't write zlps */
zlp = 0;
/* sa1100 CAN do CDC, without status endpoint ... we use
* non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
*/
cdc = 0;
- } else if (gadget_is_goku (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
- } else if (gadget_is_mq11xx (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
- } else if (gadget_is_omap (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
- } else {
+ }
+
+ gcnum = usb_gadget_controller_number (gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ else {
/* can't assume CDC works. don't want to default to
* anything less functional on CDC-capable hardware,
* so we fail in this case.
gadget->name);
return -ENODEV;
}
- snprintf (manufacturer, sizeof manufacturer,
- UTS_SYSNAME " " UTS_RELEASE "/%s",
+ snprintf (manufacturer, sizeof manufacturer, "%s %s/%s",
+ init_utsname()->sysname, init_utsname()->release,
gadget->name);
/* If there's an RNDIS configuration, that's what Windows wants to
strlcpy (manufacturer, iManufacturer, sizeof manufacturer);
if (iProduct)
strlcpy (product_desc, iProduct, sizeof product_desc);
+ if (iSerialNumber) {
+ device_desc.iSerialNumber = STRING_SERIALNUMBER,
+ strlcpy(serial_number, iSerialNumber, sizeof serial_number);
+ }
/* all we really need is bulk IN/OUT */
usb_ep_autoconfig_reset (gadget);
- ep = usb_ep_autoconfig (gadget, &fs_source_desc);
- if (!ep) {
+ in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+ if (!in_ep) {
autoconf_fail:
dev_err (&gadget->dev,
"can't autoconfigure on %s\n",
gadget->name);
return -ENODEV;
}
- EP_IN_NAME = ep->name;
- ep->driver_data = ep; /* claim */
-
- ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
- if (!ep)
+ in_ep->driver_data = in_ep; /* claim */
+
+ out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+ if (!out_ep)
goto autoconf_fail;
- EP_OUT_NAME = ep->name;
- ep->driver_data = ep; /* claim */
+ out_ep->driver_data = out_ep; /* claim */
#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
/* CDC Ethernet control interface doesn't require a status endpoint.
* Since some hosts expect one, try to allocate one anyway.
*/
if (cdc || rndis) {
- ep = usb_ep_autoconfig (gadget, &fs_status_desc);
- if (ep) {
- EP_STATUS_NAME = ep->name;
- ep->driver_data = ep; /* claim */
+ status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
+ if (status_ep) {
+ status_ep->driver_data = status_ep; /* claim */
} else if (rndis) {
dev_err (&gadget->dev,
"can't run RNDIS on %s\n",
gadget->name);
return -ENODEV;
+#ifdef DEV_CONFIG_CDC
+ /* pxa25x only does CDC subset; often used with RNDIS */
} else if (cdc) {
control_intf.bNumEndpoints = 0;
/* FIXME remove endpoint from descriptor list */
+#endif
}
}
#endif
hs_subset_descriptors();
}
+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+ usb_gadget_set_selfpowered (gadget);
+
/* For now RNDIS is always a second config */
if (rndis)
device_desc.bNumConfigurations = 2;
hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- if (EP_STATUS_NAME)
+ if (status_ep)
hs_status_desc.bEndpointAddress =
fs_status_desc.bEndpointAddress;
#endif
#endif /* DUALSPEED */
- device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
- usb_gadget_set_selfpowered (gadget);
-
if (gadget->is_otg) {
otg_descriptor.bmAttributes |= USB_OTG_HNP,
eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ eth_config.bMaxPower = 4;
#ifdef CONFIG_USB_ETH_RNDIS
rndis_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ rndis_config.bMaxPower = 4;
#endif
}
- net = alloc_etherdev (sizeof *dev);
- if (!net)
+ net = alloc_etherdev (sizeof *dev);
+ if (!net)
return status;
- dev = net->priv;
+ dev = netdev_priv(net);
spin_lock_init (&dev->lock);
- INIT_WORK (&dev->work, eth_work, dev);
+ spin_lock_init (&dev->req_lock);
+ INIT_WORK (&dev->work, eth_work);
INIT_LIST_HEAD (&dev->tx_reqs);
INIT_LIST_HEAD (&dev->rx_reqs);
dev->cdc = cdc;
dev->zlp = zlp;
+ dev->in_ep = in_ep;
+ dev->out_ep = out_ep;
+ dev->status_ep = status_ep;
+
/* Module params for these addresses should come from ID proms.
* The host side address is used with CDC and RNDIS, and commonly
* ends up in a persistent config database.
*/
- get_ether_addr(dev_addr, net->dev_addr);
+ if (get_ether_addr(dev_addr, net->dev_addr))
+ dev_warn(&gadget->dev,
+ "using random %s ethernet address\n", "self");
if (cdc || rndis) {
- get_ether_addr(host_addr, dev->host_mac);
+ if (get_ether_addr(host_addr, dev->host_mac))
+ dev_warn(&gadget->dev,
+ "using random %s ethernet address\n", "host");
#ifdef DEV_CONFIG_CDC
snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
dev->host_mac [0], dev->host_mac [1],
net->stop = eth_stop;
// watchdog_timeo, tx_timeout ...
// set_multicast_list
- net->do_ioctl = eth_ioctl;
+ SET_ETHTOOL_OPS(net, &ops);
- /* preallocate control response and buffer */
- dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+ /* preallocate control message data and buffer */
+ dev->req = eth_req_alloc (gadget->ep0, USB_BUFSIZ, GFP_KERNEL);
if (!dev->req)
goto fail;
dev->req->complete = eth_setup_complete;
- dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
- &dev->req->dma, GFP_KERNEL);
- if (!dev->req->buf) {
- usb_ep_free_request (gadget->ep0, dev->req);
- goto fail;
+
+ /* ... and maybe likewise for status transfer */
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+ if (dev->status_ep) {
+ dev->stat_req = eth_req_alloc (dev->status_ep,
+ STATUS_BYTECOUNT, GFP_KERNEL);
+ if (!dev->stat_req) {
+ eth_req_free (gadget->ep0, dev->req);
+ goto fail;
+ }
+ dev->stat_req->context = NULL;
}
+#endif
/* finish hookup to lower layer ... */
dev->gadget = gadget;
set_gadget_data (gadget, dev);
gadget->ep0->driver_data = dev;
-
+
/* two kinds of host-initiated state changes:
* - iff DATA transfer is active, carrier is "on"
* - tx queueing enabled if open *and* carrier is "on"
netif_stop_queue (dev->net);
netif_carrier_off (dev->net);
- // SET_NETDEV_DEV (dev->net, &gadget->dev);
- status = register_netdev (dev->net);
+ SET_NETDEV_DEV (dev->net, &gadget->dev);
+ status = register_netdev (dev->net);
if (status < 0)
goto fail1;
INFO (dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
INFO (dev, "using %s, OUT %s IN %s%s%s\n", gadget->name,
- EP_OUT_NAME, EP_IN_NAME,
- EP_STATUS_NAME ? " STATUS " : "",
- EP_STATUS_NAME ? EP_STATUS_NAME : ""
+ out_ep->name, in_ep->name,
+ status_ep ? " STATUS " : "",
+ status_ep ? status_ep->name : ""
);
INFO (dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
net->dev_addr [0], net->dev_addr [1],
dev->host_mac [2], dev->host_mac [3],
dev->host_mac [4], dev->host_mac [5]);
-#ifdef CONFIG_USB_ETH_RNDIS
if (rndis) {
u32 vendorID = 0;
/* FIXME RNDIS vendor id == "vendor NIC code" == ? */
-
+
dev->rndis_config = rndis_register (rndis_control_ack);
if (dev->rndis_config < 0) {
fail0:
status = -ENODEV;
goto fail;
}
-
+
/* these set up a lot of the OIDs that RNDIS needs */
rndis_set_host_mac (dev->rndis_config, dev->host_mac);
if (rndis_set_param_dev (dev->rndis_config, dev->net,
- &dev->stats))
+ &dev->stats, &dev->cdc_filter))
goto fail0;
if (rndis_set_param_vendor (dev->rndis_config, vendorID,
manufacturer))
goto fail0;
INFO (dev, "RNDIS ready\n");
}
-#endif
return status;
/*-------------------------------------------------------------------------*/
static struct usb_gadget_driver eth_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- .speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif
+ .speed = DEVSPEED,
+
.function = (char *) driver_desc,
.bind = eth_bind,
.unbind = eth_unbind,
.suspend = eth_suspend,
.resume = eth_resume,
- .driver = {
+ .driver = {
.name = (char *) shortname,
- // .shutdown = ...
- // .suspend = ...
- // .resume = ...
+ .owner = THIS_MODULE,
},
};