/*
- * Driver for the NetChip 2280 USB device controller.
- * Specs and errata are available from <http://www.netchip.com>.
+ * Driver for the PLX NET2280 USB device controller.
+ * Specs and errata are available from <http://www.plxtech.com>.
*
- * NetChip Technology Inc. supported the development of this driver.
+ * PLX Technology Inc. (formerly NetChip Technology) supported the
+ * development of this driver.
*
*
* CODE STATUS HIGHLIGHTS
/*
* Copyright (C) 2003 David Brownell
- * Copyright (C) 2003 NetChip Technologies
+ * Copyright (C) 2003-2005 PLX Technology, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/config.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <asm/unaligned.h>
-#define DRIVER_DESC "NetChip 2280 USB Peripheral Controller"
-#define DRIVER_VERSION "2004 Jan 14"
+#define DRIVER_DESC "PLX NET2280 USB Peripheral Controller"
+#define DRIVER_VERSION "2005 Feb 03"
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
#define EP_DONTUSE 13 /* nonzero */
/* "modprobe net2280 fifo_mode=1" etc */
module_param (fifo_mode, ushort, 0644);
+/* enable_suspend -- When enabled, the driver will respond to
+ * USB suspend requests by powering down the NET2280. Otherwise,
+ * USB suspend requests will be ignored. This is acceptible for
+ * self-powered devices, and helps avoid some quirks.
+ */
+static int enable_suspend = 0;
+
+/* "modprobe net2280 enable_suspend=1" etc */
+module_param (enable_suspend, bool, S_IRUGO);
+
#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
/*-------------------------------------------------------------------------*/
static struct usb_request *
-net2280_alloc_request (struct usb_ep *_ep, int gfp_flags)
+net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
struct net2280_ep *ep;
struct net2280_request *req;
#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
#define USE_KMALLOC
-#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO)
+#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT)
#define USE_KMALLOC
/* FIXME there are other cases, including an x86-64 one ... */
struct usb_ep *_ep,
unsigned bytes,
dma_addr_t *dma,
- int gfp_flags
+ gfp_t gfp_flags
)
{
void *retval;
/*-------------------------------------------------------------------------*/
static int
-net2280_queue (struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct net2280_request *req;
struct net2280_ep *ep;
if (ep->in_fifo_validate)
dmactl |= (1 << DMA_FIFO_VALIDATE);
list_for_each_entry (entry, &ep->queue, queue) {
- u32 dmacount;
+ __le32 dmacount;
if (entry == req)
continue;
&ep->dma->dmadesc);
if (req->td->dmacount & dma_done_ie)
writel (readl (&ep->dma->dmacount)
- | dma_done_ie,
+ | le32_to_cpu(dma_done_ie),
&ep->dma->dmacount);
} else {
struct net2280_request *prev;
}
spin_unlock_irqrestore (&ep->dev->lock, flags);
- return req ? 0 : -EOPNOTSUPP;
+ return 0;
}
/*-------------------------------------------------------------------------*/
/* "function" sysfs attribute */
static ssize_t
-show_function (struct device *_dev, char *buf)
+show_function (struct device *_dev, struct device_attribute *attr, char *buf)
{
struct net2280 *dev = dev_get_drvdata (_dev);
static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
static ssize_t
-show_registers (struct device *_dev, char *buf)
+show_registers (struct device *_dev, struct device_attribute *attr, char *buf)
{
struct net2280 *dev;
char *next;
unsigned long flags;
int i;
u32 t1, t2;
- char *s;
+ const char *s;
dev = dev_get_drvdata (_dev);
next = buf;
static DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL);
static ssize_t
-show_queues (struct device *_dev, char *buf)
+show_queues (struct device *_dev, struct device_attribute *attr, char *buf)
{
struct net2280 *dev;
char *next;
list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list);
}
+/* just declare this in any driver that really need it */
+extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode);
+
/**
* net2280_set_fifo_mode - change allocation of fifo buffers
* @gadget: access to the net2280 device that will be updated
cpu_to_le32s (&u.raw [0]);
cpu_to_le32s (&u.raw [1]);
- le16_to_cpus (&u.r.wValue);
- le16_to_cpus (&u.r.wIndex);
- le16_to_cpus (&u.r.wLength);
+#define w_value le16_to_cpup (&u.r.wValue)
+#define w_index le16_to_cpup (&u.r.wIndex)
+#define w_length le16_to_cpup (&u.r.wLength)
/* ack the irq */
writel (1 << SETUP_PACKET_INTERRUPT, &dev->regs->irqstat0);
switch (u.r.bRequest) {
case USB_REQ_GET_STATUS: {
struct net2280_ep *e;
- u16 status;
+ __le32 status;
/* hw handles device and interface status */
if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
goto delegate;
- if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0
- || u.r.wLength > 2)
+ if ((e = get_ep_by_addr (dev, w_index)) == 0
+ || w_length > 2)
goto do_stall;
if (readl (&e->regs->ep_rsp)
& (1 << SET_ENDPOINT_HALT))
- status = __constant_cpu_to_le16 (1);
+ status = __constant_cpu_to_le32 (1);
else
- status = __constant_cpu_to_le16 (0);
+ status = __constant_cpu_to_le32 (0);
/* don't bother with a request object! */
writel (0, &dev->epregs [0].ep_irqenb);
- set_fifo_bytecount (ep, u.r.wLength);
- writel (status, &dev->epregs [0].ep_data);
+ set_fifo_bytecount (ep, w_length);
+ writel ((__force u32)status, &dev->epregs [0].ep_data);
allow_status (ep);
VDEBUG (dev, "%s stat %02x\n", ep->ep.name, status);
goto next_endpoints;
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
- if (u.r.wValue != USB_ENDPOINT_HALT
- || u.r.wLength != 0)
+ if (w_value != USB_ENDPOINT_HALT
+ || w_length != 0)
goto do_stall;
- if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0)
+ if ((e = get_ep_by_addr (dev, w_index)) == 0)
goto do_stall;
clear_halt (e);
allow_status (ep);
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
- if (u.r.wValue != USB_ENDPOINT_HALT
- || u.r.wLength != 0)
+ if (w_value != USB_ENDPOINT_HALT
+ || w_length != 0)
goto do_stall;
- if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0)
+ if ((e = get_ep_by_addr (dev, w_index)) == 0)
goto do_stall;
set_halt (e);
allow_status (ep);
break;
default:
delegate:
- VDEBUG (dev, "setup %02x.%02x v%04x i%04x "
+ VDEBUG (dev, "setup %02x.%02x v%04x i%04x l%04x"
"ep_cfg %08x\n",
u.r.bRequestType, u.r.bRequest,
- u.r.wValue, u.r.wIndex,
+ w_value, w_index, w_length,
readl (&ep->regs->ep_cfg));
spin_unlock (&dev->lock);
tmp = dev->driver->setup (&dev->gadget, &u.r);
*/
}
+#undef w_value
+#undef w_index
+#undef w_length
+
next_endpoints:
/* endpoint data irq ? */
scratch = stat & 0x7f;
if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) {
if (dev->driver->suspend)
dev->driver->suspend (&dev->gadget);
+ if (!enable_suspend)
+ stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT);
} else {
if (dev->driver->resume)
dev->driver->resume (&dev->gadget);
restart_dma (ep);
else if (ep->is_in && use_dma_chaining) {
struct net2280_request *req;
- u32 dmacount;
+ __le32 dmacount;
/* the descriptor at the head of the chain
* may still have VALID_BIT clear; that's
git://git.onelab.eu / linux-2.6.git / blobdiff