* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
*
* This file is licenced under GPL
*/
/*
* OHCI Root Hub ... the nonsharable stuff
- *
- * Registers don't need cpu_to_le32, that happens transparently
*/
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect. AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define read_roothub(hc, register, mask) ({ \
- u32 temp = ohci_readl (&hc->regs->roothub.register); \
- if (temp == -1) \
- disable (hc); \
- else if (hc->flags & OHCI_QUIRK_AMD756) \
- while (temp & mask) \
- temp = ohci_readl (&hc->regs->roothub.register); \
- temp; })
-
-static u32 roothub_a (struct ohci_hcd *hc)
- { return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci_hcd *hc)
- { return ohci_readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci_hcd *hc)
- { return ohci_readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci_hcd *hc, int i)
- { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-/*-------------------------------------------------------------------------*/
-
#define dbg_port(hc,label,num,value) \
ohci_dbg (hc, \
"%s roothub.portstatus [%d] " \
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+#ifdef CONFIG_PM
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
static void dl_done_list (struct ohci_hcd *, struct pt_regs *);
static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *);
+static int ohci_restart (struct ohci_hcd *ohci);
-static int ohci_hub_suspend (struct usb_hcd *hcd)
+static int ohci_bus_suspend (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- struct usb_device *root = hcd_to_bus (&ohci->hcd)->root_hub;
int status = 0;
+ unsigned long flags;
- if (root->dev.power.power_state != 0)
- return 0;
- if (time_before (jiffies, ohci->next_statechange))
- return -EAGAIN;
+ spin_lock_irqsave (&ohci->lock, flags);
- spin_lock_irq (&ohci->lock);
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ spin_unlock_irqrestore (&ohci->lock, flags);
+ return -ESHUTDOWN;
+ }
- ohci->hc_control = ohci_readl (&ohci->regs->control);
+ ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_RESUME:
ohci_dbg (ohci, "resume/suspend?\n");
ohci->hc_control &= ~OHCI_CTRL_HCFS;
ohci->hc_control |= OHCI_USB_RESET;
- writel (ohci->hc_control, &ohci->regs->control);
- (void) ohci_readl (&ohci->regs->control);
+ ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+ (void) ohci_readl (ohci, &ohci->regs->control);
/* FALL THROUGH */
case OHCI_USB_RESET:
status = -EBUSY;
ohci_dbg (ohci, "needs reinit!\n");
goto done;
case OHCI_USB_SUSPEND:
- ohci_dbg (ohci, "already suspended?\n");
- goto succeed;
+ ohci_dbg (ohci, "already suspended\n");
+ goto done;
}
ohci_dbg (ohci, "suspend root hub\n");
/* First stop any processing */
- ohci->hcd.state = USB_STATE_QUIESCING;
if (ohci->hc_control & OHCI_SCHED_ENABLES) {
int limit;
ohci->hc_control &= ~OHCI_SCHED_ENABLES;
- writel (ohci->hc_control, &ohci->regs->control);
- ohci->hc_control = ohci_readl (&ohci->regs->control);
- writel (OHCI_INTR_SF, &ohci->regs->intrstatus);
+ ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+ ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
+ ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
/* sched disables take effect on the next frame,
* then the last WDH could take 6+ msec
while (limit > 0) {
udelay (250);
limit =- 250;
- if (ohci_readl (&ohci->regs->intrstatus) & OHCI_INTR_SF)
+ if (ohci_readl (ohci, &ohci->regs->intrstatus)
+ & OHCI_INTR_SF)
break;
}
dl_done_list (ohci, NULL);
mdelay (7);
}
dl_done_list (ohci, NULL);
- finish_unlinks (ohci, OHCI_FRAME_NO(ohci->hcca), NULL);
- writel (ohci_readl (&ohci->regs->intrstatus), &ohci->regs->intrstatus);
+ finish_unlinks (ohci, ohci_frame_no(ohci), NULL);
+ ohci_writel (ohci, ohci_readl (ohci, &ohci->regs->intrstatus),
+ &ohci->regs->intrstatus);
/* maybe resume can wake root hub */
- if (ohci->hcd.remote_wakeup)
+ if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev))
ohci->hc_control |= OHCI_CTRL_RWE;
else
ohci->hc_control &= ~OHCI_CTRL_RWE;
- /* Suspend hub */
+ /* Suspend hub ... this is the "global (to this bus) suspend" mode,
+ * which doesn't imply ports will first be individually suspended.
+ */
ohci->hc_control &= ~OHCI_CTRL_HCFS;
ohci->hc_control |= OHCI_USB_SUSPEND;
- writel (ohci->hc_control, &ohci->regs->control);
- (void) ohci_readl (&ohci->regs->control);
+ ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+ (void) ohci_readl (ohci, &ohci->regs->control);
/* no resumes until devices finish suspending */
ohci->next_statechange = jiffies + msecs_to_jiffies (5);
-succeed:
- /* it's not USB_STATE_SUSPENDED unless access to this
- * hub from the non-usb side (PCI, SOC, etc) stopped
- */
- root->dev.power.power_state = 3;
done:
- spin_unlock_irq (&ohci->lock);
+ /* external suspend vs self autosuspend ... same effect */
+ if (status == 0)
+ usb_hcd_suspend_root_hub(hcd);
+ spin_unlock_irqrestore (&ohci->lock, flags);
return status;
}
return ed;
}
-static int hc_restart (struct ohci_hcd *ohci);
-
-/* caller owns root->serialize */
-static int ohci_hub_resume (struct usb_hcd *hcd)
+/* caller has locked the root hub */
+static int ohci_bus_resume (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- struct usb_device *root = hcd_to_bus (&ohci->hcd)->root_hub;
u32 temp, enables;
int status = -EINPROGRESS;
+ unsigned long flags;
- if (!root->dev.power.power_state)
- return 0;
if (time_before (jiffies, ohci->next_statechange))
- return -EAGAIN;
+ msleep(5);
- spin_lock_irq (&ohci->lock);
- ohci->hc_control = ohci_readl (&ohci->regs->control);
- switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+ spin_lock_irqsave (&ohci->lock, flags);
+
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ spin_unlock_irqrestore (&ohci->lock, flags);
+ return -ESHUTDOWN;
+ }
+
+
+ ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
+
+ if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+ /* this can happen after resuming a swsusp snapshot */
+ if (hcd->state == HC_STATE_RESUMING) {
+ ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
+ ohci->hc_control);
+ status = -EBUSY;
+ /* this happens when pmcore resumes HC then root */
+ } else {
+ ohci_dbg (ohci, "duplicate resume\n");
+ status = 0;
+ }
+ } else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_SUSPEND:
ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
ohci->hc_control |= OHCI_USB_RESUME;
- writel (ohci->hc_control, &ohci->regs->control);
- (void) ohci_readl (&ohci->regs->control);
+ ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+ (void) ohci_readl (ohci, &ohci->regs->control);
ohci_dbg (ohci, "resume root hub\n");
break;
case OHCI_USB_RESUME:
ohci_info (ohci, "wakeup\n");
break;
case OHCI_USB_OPER:
- ohci_dbg (ohci, "odd resume\n");
- root->dev.power.power_state = 0;
- status = 0;
+ /* this can happen after resuming a swsusp snapshot */
+ ohci_dbg (ohci, "snapshot resume? reinit\n");
+ status = -EBUSY;
break;
default: /* RESET, we lost power */
- ohci_dbg (ohci, "root hub hardware reset\n");
+ ohci_dbg (ohci, "lost power\n");
status = -EBUSY;
}
- spin_unlock_irq (&ohci->lock);
- if (status == -EBUSY)
- return hc_restart (ohci);
+ spin_unlock_irqrestore (&ohci->lock, flags);
+ if (status == -EBUSY) {
+ (void) ohci_init (ohci);
+ return ohci_restart (ohci);
+ }
if (status != -EINPROGRESS)
return status;
- temp = roothub_a (ohci) & RH_A_NDP;
+ temp = ohci->num_ports;
enables = 0;
while (temp--) {
- u32 stat = ohci_readl (&ohci->regs->roothub.portstatus [temp]);
+ u32 stat = ohci_readl (ohci,
+ &ohci->regs->roothub.portstatus [temp]);
/* force global, not selective, resume */
if (!(stat & RH_PS_PSS))
continue;
- writel (RH_PS_POCI, &ohci->regs->roothub.portstatus [temp]);
+ ohci_writel (ohci, RH_PS_POCI,
+ &ohci->regs->roothub.portstatus [temp]);
}
- /* Some controllers (lucent) need extra-long delays */
- ohci->hcd.state = USB_STATE_RESUMING;
- mdelay (20 /* usb 11.5.1.10 */ + 15);
+ /* Some controllers (lucent erratum) need extra-long delays */
+ msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
- temp = ohci_readl (&ohci->regs->control);
+ temp = ohci_readl (ohci, &ohci->regs->control);
temp &= OHCI_CTRL_HCFS;
if (temp != OHCI_USB_RESUME) {
ohci_err (ohci, "controller won't resume\n");
}
/* disable old schedule state, reinit from scratch */
- writel (0, &ohci->regs->ed_controlhead);
- writel (0, &ohci->regs->ed_controlcurrent);
- writel (0, &ohci->regs->ed_bulkhead);
- writel (0, &ohci->regs->ed_bulkcurrent);
- writel (0, &ohci->regs->ed_periodcurrent);
- writel ((u32) ohci->hcca_dma, &ohci->regs->hcca);
-
+ ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
+ ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
+ ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
+ ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
+ ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
+ ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
+
+ /* Sometimes PCI D3 suspend trashes frame timings ... */
periodic_reinit (ohci);
/* interrupts might have been disabled */
- writel (OHCI_INTR_INIT, &ohci->regs->intrenable);
+ ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
if (ohci->ed_rm_list)
- writel (OHCI_INTR_SF, &ohci->regs->intrenable);
- writel (ohci_readl (&ohci->regs->intrstatus), &ohci->regs->intrstatus);
+ ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
+ ohci_writel (ohci, ohci_readl (ohci, &ohci->regs->intrstatus),
+ &ohci->regs->intrstatus);
/* Then re-enable operations */
- writel (OHCI_USB_OPER, &ohci->regs->control);
- (void) ohci_readl (&ohci->regs->control);
+ ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
+ (void) ohci_readl (ohci, &ohci->regs->control);
msleep (3);
- temp = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- if (ohci->hcd.can_wakeup)
- temp |= OHCI_CTRL_RWC;
+ temp = ohci->hc_control;
+ temp &= OHCI_CTRL_RWC;
+ temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci->hc_control = temp;
- writel (temp, &ohci->regs->control);
- (void) ohci_readl (&ohci->regs->control);
+ ohci_writel (ohci, temp, &ohci->regs->control);
+ (void) ohci_readl (ohci, &ohci->regs->control);
/* TRSMRCY */
msleep (10);
- root->dev.power.power_state = 0;
/* keep it alive for ~5x suspend + resume costs */
ohci->next_statechange = jiffies + msecs_to_jiffies (250);
temp = 0;
if (!ohci->ed_rm_list) {
if (ohci->ed_controltail) {
- writel (find_head (ohci->ed_controltail)->dma,
- &ohci->regs->ed_controlhead);
+ ohci_writel (ohci,
+ find_head (ohci->ed_controltail)->dma,
+ &ohci->regs->ed_controlhead);
enables |= OHCI_CTRL_CLE;
temp |= OHCI_CLF;
}
if (ohci->ed_bulktail) {
- writel (find_head (ohci->ed_bulktail)->dma,
+ ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
&ohci->regs->ed_bulkhead);
enables |= OHCI_CTRL_BLE;
temp |= OHCI_BLF;
}
}
- if (hcd_to_bus (&ohci->hcd)->bandwidth_isoc_reqs
- || hcd_to_bus (&ohci->hcd)->bandwidth_int_reqs)
+ if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
if (enables) {
ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
ohci->hc_control |= enables;
- writel (ohci->hc_control, &ohci->regs->control);
+ ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
if (temp)
- writel (status, &ohci->regs->cmdstatus);
- (void) ohci_readl (&ohci->regs->control);
+ ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
+ (void) ohci_readl (ohci, &ohci->regs->control);
}
- ohci->hcd.state = USB_STATE_RUNNING;
return 0;
}
-static void ohci_rh_resume (void *_hcd)
-{
- struct usb_hcd *hcd = _hcd;
-
- down (&hcd->self.root_hub->serialize);
- (void) ohci_hub_resume (hcd);
- up (&hcd->self.root_hub->serialize);
-}
-
-#else
-
-static void ohci_rh_resume (void *_hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (_hcd);
- ohci_dbg(ohci, "rh_resume ??\n");
-}
-
-#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */
+#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ports, i, changed = 0, length = 1;
- int can_suspend = 1;
-
- ports = roothub_a (ohci) & RH_A_NDP;
- if (ports > MAX_ROOT_PORTS) {
- if (!HCD_IS_RUNNING(ohci->hcd.state))
- return -ESHUTDOWN;
- ohci_err (ohci, "bogus NDP=%d, rereads as NDP=%d\n",
- ports, ohci_readl (&ohci->regs->roothub.a) & RH_A_NDP);
+ int i, changed = 0, length = 1;
+ int can_suspend = device_may_wakeup(&hcd->self.root_hub->dev);
+ unsigned long flags;
+
+ spin_lock_irqsave (&ohci->lock, flags);
+
+ /* handle autosuspended root: finish resuming before
+ * letting khubd or root hub timer see state changes.
+ */
+ if (unlikely((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER
+ || !HC_IS_RUNNING(hcd->state))) {
+ can_suspend = 0;
+ goto done;
+ }
+
+ /* undocumented erratum seen on at least rev D */
+ if ((ohci->flags & OHCI_QUIRK_AMD756)
+ && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
+ ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
+ ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
/* retry later; "should not happen" */
- return 0;
+ goto done;
}
/* init status */
buf [0] = changed = 1;
else
buf [0] = 0;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
buf [1] = 0;
length++;
}
/* look at each port */
- for (i = 0; i < ports; i++) {
+ for (i = 0; i < ohci->num_ports; i++) {
u32 status = roothub_portstatus (ohci, i);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
*/
if (!(status & RH_PS_CCS))
continue;
- if ((status & RH_PS_PSS) && ohci->hcd.remote_wakeup)
+ if ((status & RH_PS_PSS) && can_suspend)
continue;
can_suspend = 0;
}
+done:
+ spin_unlock_irqrestore (&ohci->lock, flags);
#ifdef CONFIG_PM
/* save power by suspending idle root hubs;
&& ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES)
& ohci->hc_control)
== OHCI_USB_OPER
- && down_trylock (&hcd->self.root_hub->serialize) == 0
+ && time_after (jiffies, ohci->next_statechange)
+ && usb_trylock_device (hcd->self.root_hub) == 0
) {
ohci_vdbg (ohci, "autosuspend\n");
- (void) ohci_hub_suspend (&ohci->hcd);
- ohci->hcd.state = USB_STATE_RUNNING;
- up (&hcd->self.root_hub->serialize);
+ (void) ohci_bus_suspend (hcd);
+ usb_unlock_device (hcd->self.root_hub);
}
#endif
struct usb_hub_descriptor *desc
) {
u32 rh = roothub_a (ohci);
- int ports = rh & RH_A_NDP;
u16 temp;
desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
desc->bHubContrCurrent = 0;
- desc->bNbrPorts = ports;
- temp = 1 + (ports / 8);
+ desc->bNbrPorts = ohci->num_ports;
+ temp = 1 + (ohci->num_ports / 8);
desc->bDescLength = 7 + 2 * temp;
temp = 0;
temp |= 0x0010;
else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */
temp |= 0x0008;
- desc->wHubCharacteristics = cpu_to_le16 (temp);
+ desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp);
/* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
rh = roothub_b (ohci);
+ memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
desc->bitmap [0] = rh & RH_B_DR;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
desc->bitmap [1] = (rh & RH_B_DR) >> 8;
- desc->bitmap [2] = desc->bitmap [3] = 0xff;
+ desc->bitmap [2] = 0xff;
} else
desc->bitmap [1] = 0xff;
}
/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_OTG
+
+static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ u32 status;
+
+ if (!port)
+ return -EINVAL;
+ port--;
+
+ /* start port reset before HNP protocol times out */
+ status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
+ if (!(status & RH_PS_CCS))
+ return -ENODEV;
+
+ /* khubd will finish the reset later */
+ ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
+ return 0;
+}
+
+static void start_hnp(struct ohci_hcd *ohci);
+
+#else
+
+#define ohci_start_port_reset NULL
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+
+/* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling,
+ * not necessarily continuous ... to guard against resume signaling.
+ * The short timeout is safe for non-root hubs, and is backward-compatible
+ * with earlier Linux hosts.
+ */
+#ifdef CONFIG_USB_SUSPEND
+#define PORT_RESET_MSEC 50
+#else
+#define PORT_RESET_MSEC 10
+#endif
+
+/* this timer value might be vendor-specific ... */
+#define PORT_RESET_HW_MSEC 10
+
+/* wrap-aware logic morphed from <linux/jiffies.h> */
+#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
+
+/* called from some task, normally khubd */
+static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port)
+{
+ __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
+ u32 temp;
+ u16 now = ohci_readl(ohci, &ohci->regs->fmnumber);
+ u16 reset_done = now + PORT_RESET_MSEC;
+
+ /* build a "continuous enough" reset signal, with up to
+ * 3msec gap between pulses. scheduler HZ==100 must work;
+ * this might need to be deadline-scheduled.
+ */
+ do {
+ /* spin until any current reset finishes */
+ for (;;) {
+ temp = ohci_readl (ohci, portstat);
+ if (!(temp & RH_PS_PRS))
+ break;
+ udelay (500);
+ }
+
+ if (!(temp & RH_PS_CCS))
+ break;
+ if (temp & RH_PS_PRSC)
+ ohci_writel (ohci, RH_PS_PRSC, portstat);
+
+ /* start the next reset, sleep till it's probably done */
+ ohci_writel (ohci, RH_PS_PRS, portstat);
+ msleep(PORT_RESET_HW_MSEC);
+ now = ohci_readl(ohci, &ohci->regs->fmnumber);
+ } while (tick_before(now, reset_done));
+ /* caller synchronizes using PRSC */
+}
+
static int ohci_hub_control (
struct usb_hcd *hcd,
u16 typeReq,
u32 temp;
int retval = 0;
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ return -ESHUTDOWN;
+
switch (typeReq) {
case ClearHubFeature:
switch (wValue) {
case C_HUB_OVER_CURRENT:
- writel (RH_HS_OCIC, &ohci->regs->roothub.status);
+ ohci_writel (ohci, RH_HS_OCIC,
+ &ohci->regs->roothub.status);
case C_HUB_LOCAL_POWER:
break;
default:
temp = RH_PS_POCI;
if ((ohci->hc_control & OHCI_CTRL_HCFS)
!= OHCI_USB_OPER)
- schedule_work (&ohci->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
break;
case USB_PORT_FEAT_C_SUSPEND:
temp = RH_PS_PSSC;
default:
goto error;
}
- writel (temp, &ohci->regs->roothub.portstatus [wIndex]);
- // ohci_readl (&ohci->regs->roothub.portstatus [wIndex]);
+ ohci_writel (ohci, temp,
+ &ohci->regs->roothub.portstatus [wIndex]);
+ // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
break;
case GetHubDescriptor:
ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf);
break;
case GetHubStatus:
temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
- *(u32 *) buf = cpu_to_le32 (temp);
+ *(__le32 *) buf = cpu_to_le32 (temp);
break;
case GetPortStatus:
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
temp = roothub_portstatus (ohci, wIndex);
- *(u32 *) buf = cpu_to_le32 (temp);
+ *(__le32 *) buf = cpu_to_le32 (temp);
#ifndef OHCI_VERBOSE_DEBUG
if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
wIndex--;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- writel (RH_PS_PSS,
+#ifdef CONFIG_USB_OTG
+ if (hcd->self.otg_port == (wIndex + 1)
+ && hcd->self.b_hnp_enable)
+ start_hnp(ohci);
+ else
+#endif
+ ohci_writel (ohci, RH_PS_PSS,
&ohci->regs->roothub.portstatus [wIndex]);
break;
case USB_PORT_FEAT_POWER:
- writel (RH_PS_PPS,
+ ohci_writel (ohci, RH_PS_PPS,
&ohci->regs->roothub.portstatus [wIndex]);
break;
case USB_PORT_FEAT_RESET:
- temp = ohci_readl (&ohci->regs->roothub.portstatus [wIndex]);
- if (temp & RH_PS_CCS)
- writel (RH_PS_PRS,
- &ohci->regs->roothub.portstatus [wIndex]);
+ root_port_reset (ohci, wIndex);
break;
default:
goto error;
git://git.onelab.eu / linux-2.6.git / blobdiff