* (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
* support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
* (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
- * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
+ * (C) Copyright 2004-2005 Alan Stern, stern@rowland.harvard.edu
*
* Intel documents this fairly well, and as far as I know there
* are no royalties or anything like that, but even so there are
* people who decided that they want to do the same thing in a
* completely different way.
*
- * WARNING! The USB documentation is downright evil. Most of it
- * is just crap, written by a committee. You're better off ignoring
- * most of it, the important stuff is:
- * - the low-level protocol (fairly simple but lots of small details)
- * - working around the horridness of the rest
*/
#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#else
-#undef DEBUG
-#endif
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
#include <linux/pm.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/usb.h>
+#include <linux/bitops.h>
-#include <asm/bitops.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
/*
* Version Information
*/
-#define DRIVER_VERSION "v2.2"
+#define DRIVER_VERSION "v2.3"
#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
Alan Stern"
/*
* debug = 0, no debugging messages
- * debug = 1, dump failed URB's except for stalls
- * debug = 2, dump all failed URB's (including stalls)
- * show all queues in /proc/driver/uhci/[pci_addr]
- * debug = 3, show all TD's in URB's when dumping
+ * debug = 1, dump failed URBs except for stalls
+ * debug = 2, dump all failed URBs (including stalls)
+ * show all queues in /debug/uhci/[pci_addr]
+ * debug = 3, show all TDs in URBs when dumping
*/
#ifdef DEBUG
static int debug = 1;
#else
static int debug = 0;
#endif
-MODULE_PARM(debug, "i");
+module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug level");
static char *errbuf;
#define ERRBUF_LEN (32 * 1024)
-#include "uhci-hub.c"
-#include "uhci-debug.c"
-
static kmem_cache_t *uhci_up_cachep; /* urb_priv */
-static int uhci_get_current_frame_number(struct uhci_hcd *uhci);
-static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
-static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb);
-static void uhci_remove_pending_urbps(struct uhci_hcd *uhci);
-static void uhci_finish_completion(struct usb_hcd *hcd, struct pt_regs *regs);
-static void uhci_free_pending_qhs(struct uhci_hcd *uhci);
-static void uhci_free_pending_tds(struct uhci_hcd *uhci);
-
-static void hc_state_transitions(struct uhci_hcd *uhci);
+static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
+static void wakeup_rh(struct uhci_hcd *uhci);
+static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
/* If a transfer is still active after this much time, turn off FSBR */
-#define IDLE_TIMEOUT (HZ / 20) /* 50 ms */
-#define FSBR_DELAY (HZ / 20) /* 50 ms */
+#define IDLE_TIMEOUT msecs_to_jiffies(50)
+#define FSBR_DELAY msecs_to_jiffies(50)
/* When we timeout an idle transfer for FSBR, we'll switch it over to */
-/* depth first traversal. We'll do it in groups of this number of TD's */
+/* depth first traversal. We'll do it in groups of this number of TDs */
/* to make sure it doesn't hog all of the bandwidth */
#define DEPTH_INTERVAL 5
-/*
- * Technically, updating td->status here is a race, but it's not really a
- * problem. The worst that can happen is that we set the IOC bit again
- * generating a spurious interrupt. We could fix this by creating another
- * QH and leaving the IOC bit always set, but then we would have to play
- * games with the FSBR code to make sure we get the correct order in all
- * the cases. I don't think it's worth the effort
- */
-static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci)
-{
- uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
-}
-
-static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
-{
- uhci->term_td->status &= ~cpu_to_le32(TD_CTRL_IOC);
-}
-
-static inline void uhci_moveto_complete(struct uhci_hcd *uhci,
- struct urb_priv *urbp)
-{
- list_move_tail(&urbp->urb_list, &uhci->complete_list);
-}
-
-static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci, struct usb_device *dev)
-{
- dma_addr_t dma_handle;
- struct uhci_td *td;
-
- td = dma_pool_alloc(uhci->td_pool, GFP_ATOMIC, &dma_handle);
- if (!td)
- return NULL;
-
- td->dma_handle = dma_handle;
-
- td->link = UHCI_PTR_TERM;
- td->buffer = 0;
-
- td->frame = -1;
- td->dev = dev;
-
- INIT_LIST_HEAD(&td->list);
- INIT_LIST_HEAD(&td->remove_list);
- INIT_LIST_HEAD(&td->fl_list);
-
- usb_get_dev(dev);
-
- return td;
-}
-
-static inline void uhci_fill_td(struct uhci_td *td, u32 status,
- u32 token, u32 buffer)
-{
- td->status = cpu_to_le32(status);
- td->token = cpu_to_le32(token);
- td->buffer = cpu_to_le32(buffer);
-}
-
-/*
- * We insert Isochronous URB's directly into the frame list at the beginning
- */
-static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum)
-{
- framenum %= UHCI_NUMFRAMES;
-
- td->frame = framenum;
-
- /* Is there a TD already mapped there? */
- if (uhci->fl->frame_cpu[framenum]) {
- struct uhci_td *ftd, *ltd;
-
- ftd = uhci->fl->frame_cpu[framenum];
- ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
-
- list_add_tail(&td->fl_list, &ftd->fl_list);
-
- td->link = ltd->link;
- wmb();
- ltd->link = cpu_to_le32(td->dma_handle);
- } else {
- td->link = uhci->fl->frame[framenum];
- wmb();
- uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle);
- uhci->fl->frame_cpu[framenum] = td;
- }
-}
-
-static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td)
-{
- /* If it's not inserted, don't remove it */
- if (td->frame == -1 && list_empty(&td->fl_list))
- return;
-
- if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) {
- if (list_empty(&td->fl_list)) {
- uhci->fl->frame[td->frame] = td->link;
- uhci->fl->frame_cpu[td->frame] = NULL;
- } else {
- struct uhci_td *ntd;
-
- ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
- uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
- uhci->fl->frame_cpu[td->frame] = ntd;
- }
- } else {
- struct uhci_td *ptd;
-
- ptd = list_entry(td->fl_list.prev, struct uhci_td, fl_list);
- ptd->link = td->link;
- }
-
- wmb();
- td->link = UHCI_PTR_TERM;
-
- list_del_init(&td->fl_list);
- td->frame = -1;
-}
-
-/*
- * Inserts a td into qh list at the top.
- */
-static void uhci_insert_tds_in_qh(struct uhci_qh *qh, struct urb *urb, u32 breadth)
-{
- struct list_head *tmp, *head;
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct uhci_td *td, *ptd;
-
- if (list_empty(&urbp->td_list))
- return;
-
- head = &urbp->td_list;
- tmp = head->next;
-
- /* Ordering isn't important here yet since the QH hasn't been */
- /* inserted into the schedule yet */
- td = list_entry(tmp, struct uhci_td, list);
-
- /* Add the first TD to the QH element pointer */
- qh->element = cpu_to_le32(td->dma_handle) | breadth;
-
- ptd = td;
-
- /* Then link the rest of the TD's */
- tmp = tmp->next;
- while (tmp != head) {
- td = list_entry(tmp, struct uhci_td, list);
-
- tmp = tmp->next;
-
- ptd->link = cpu_to_le32(td->dma_handle) | breadth;
-
- ptd = td;
- }
-
- ptd->link = UHCI_PTR_TERM;
-}
-
-static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td)
-{
- if (!list_empty(&td->list))
- dev_warn(uhci_dev(uhci), "td %p still in list!\n", td);
- if (!list_empty(&td->remove_list))
- dev_warn(uhci_dev(uhci), "td %p still in remove_list!\n", td);
- if (!list_empty(&td->fl_list))
- dev_warn(uhci_dev(uhci), "td %p still in fl_list!\n", td);
-
- if (td->dev)
- usb_put_dev(td->dev);
-
- dma_pool_free(uhci->td_pool, td, td->dma_handle);
-}
-
-static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci, struct usb_device *dev)
-{
- dma_addr_t dma_handle;
- struct uhci_qh *qh;
-
- qh = dma_pool_alloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
- if (!qh)
- return NULL;
-
- qh->dma_handle = dma_handle;
-
- qh->element = UHCI_PTR_TERM;
- qh->link = UHCI_PTR_TERM;
-
- qh->dev = dev;
- qh->urbp = NULL;
-
- INIT_LIST_HEAD(&qh->list);
- INIT_LIST_HEAD(&qh->remove_list);
-
- usb_get_dev(dev);
-
- return qh;
-}
-
-static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
-{
- if (!list_empty(&qh->list))
- dev_warn(uhci_dev(uhci), "qh %p list not empty!\n", qh);
- if (!list_empty(&qh->remove_list))
- dev_warn(uhci_dev(uhci), "qh %p still in remove_list!\n", qh);
-
- if (qh->dev)
- usb_put_dev(qh->dev);
-
- dma_pool_free(uhci->qh_pool, qh, qh->dma_handle);
-}
-
-/*
- * Append this urb's qh after the last qh in skelqh->list
- *
- * Note that urb_priv.queue_list doesn't have a separate queue head;
- * it's a ring with every element "live".
- */
-static void uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct list_head *tmp;
- struct uhci_qh *lqh;
-
- /* Grab the last QH */
- lqh = list_entry(skelqh->list.prev, struct uhci_qh, list);
-
- /* Point to the next skelqh */
- urbp->qh->link = lqh->link;
- wmb(); /* Ordering is important */
-
- /*
- * Patch QHs for previous endpoint's queued URBs? HC goes
- * here next, not to the next skelqh it now points to.
- *
- * lqh --> td ... --> qh ... --> td --> qh ... --> td
- * | | |
- * v v v
- * +<----------------+-----------------+
- * v
- * newqh --> td ... --> td
- * |
- * v
- * ...
- *
- * The HC could see (and use!) any of these as we write them.
- */
- lqh->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
- if (lqh->urbp) {
- list_for_each (tmp, &lqh->urbp->queue_list) {
- struct urb_priv *turbp =
- list_entry(tmp, struct urb_priv, queue_list);
-
- turbp->qh->link = lqh->link;
- }
- }
-
- list_add_tail(&urbp->qh->list, &skelqh->list);
-}
-
-/*
- * Start removal of QH from schedule; it finishes next frame.
- * TDs should be unlinked before this is called.
- */
-static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
-{
- struct uhci_qh *pqh;
- u32 newlink;
- unsigned int age;
-
- if (!qh)
- return;
-
- /*
- * Only go through the hoops if it's actually linked in
- */
- if (!list_empty(&qh->list)) {
-
- /* If our queue is nonempty, make the next URB the head */
- if (!list_empty(&qh->urbp->queue_list)) {
- struct urb_priv *nurbp;
-
- nurbp = list_entry(qh->urbp->queue_list.next,
- struct urb_priv, queue_list);
- nurbp->queued = 0;
- list_add(&nurbp->qh->list, &qh->list);
- newlink = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
- } else
- newlink = qh->link;
-
- /* Fix up the previous QH's queue to link to either
- * the new head of this queue or the start of the
- * next endpoint's queue. */
- pqh = list_entry(qh->list.prev, struct uhci_qh, list);
- pqh->link = newlink;
- if (pqh->urbp) {
- struct list_head *head, *tmp;
-
- head = &pqh->urbp->queue_list;
- tmp = head->next;
- while (head != tmp) {
- struct urb_priv *turbp =
- list_entry(tmp, struct urb_priv, queue_list);
-
- tmp = tmp->next;
-
- turbp->qh->link = newlink;
- }
- }
- wmb();
-
- /* Leave qh->link in case the HC is on the QH now, it will */
- /* continue the rest of the schedule */
- qh->element = UHCI_PTR_TERM;
-
- list_del_init(&qh->list);
- }
-
- list_del_init(&qh->urbp->queue_list);
- qh->urbp = NULL;
-
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->qh_remove_age) {
- uhci_free_pending_qhs(uhci);
- uhci->qh_remove_age = age;
- }
-
- /* Check to see if the remove list is empty. Set the IOC bit */
- /* to force an interrupt so we can remove the QH */
- if (list_empty(&uhci->qh_remove_list))
- uhci_set_next_interrupt(uhci);
-
- list_add(&qh->remove_list, &uhci->qh_remove_list);
-}
-
-static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct list_head *head, *tmp;
-
- head = &urbp->td_list;
- tmp = head->next;
- while (head != tmp) {
- struct uhci_td *td = list_entry(tmp, struct uhci_td, list);
-
- tmp = tmp->next;
-
- if (toggle)
- td->token |= cpu_to_le32(TD_TOKEN_TOGGLE);
- else
- td->token &= ~cpu_to_le32(TD_TOKEN_TOGGLE);
-
-
- toggle ^= 1;
- }
-
- return toggle;
-}
-
-/* This function will append one URB's QH to another URB's QH. This is for */
-/* queuing interrupt, control or bulk transfers */
-static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, struct urb *urb)
-{
- struct urb_priv *eurbp, *urbp, *furbp, *lurbp;
- struct list_head *tmp;
- struct uhci_td *lltd;
-
- eurbp = eurb->hcpriv;
- urbp = urb->hcpriv;
-
- /* Find the first URB in the queue */
- if (eurbp->queued) {
- struct list_head *head = &eurbp->queue_list;
-
- tmp = head->next;
- while (tmp != head) {
- struct urb_priv *turbp =
- list_entry(tmp, struct urb_priv, queue_list);
-
- if (!turbp->queued)
- break;
-
- tmp = tmp->next;
- }
- } else
- tmp = &eurbp->queue_list;
-
- furbp = list_entry(tmp, struct urb_priv, queue_list);
- lurbp = list_entry(furbp->queue_list.prev, struct urb_priv, queue_list);
-
- lltd = list_entry(lurbp->td_list.prev, struct uhci_td, list);
-
- /* Control transfers always start with toggle 0 */
- if (!usb_pipecontrol(urb->pipe))
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe),
- uhci_fixup_toggle(urb,
- uhci_toggle(td_token(lltd)) ^ 1));
-
- /* All qh's in the queue need to link to the next queue */
- urbp->qh->link = eurbp->qh->link;
-
- wmb(); /* Make sure we flush everything */
-
- lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
-
- list_add_tail(&urbp->queue_list, &furbp->queue_list);
-
- urbp->queued = 1;
-}
-
-static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp, *nurbp;
- struct list_head *head, *tmp;
- struct urb_priv *purbp;
- struct uhci_td *pltd;
- unsigned int toggle;
-
- urbp = urb->hcpriv;
-
- if (list_empty(&urbp->queue_list))
- return;
-
- nurbp = list_entry(urbp->queue_list.next, struct urb_priv, queue_list);
-
- /*
- * Fix up the toggle for the following URBs in the queue.
- * Only needed for bulk and interrupt: control and isochronous
- * endpoints don't propagate toggles between messages.
- */
- if (usb_pipebulk(urb->pipe) || usb_pipeint(urb->pipe)) {
- if (!urbp->queued)
- /* We just set the toggle in uhci_unlink_generic */
- toggle = usb_gettoggle(urb->dev,
- usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe));
- else {
- /* If we're in the middle of the queue, grab the */
- /* toggle from the TD previous to us */
- purbp = list_entry(urbp->queue_list.prev,
- struct urb_priv, queue_list);
- pltd = list_entry(purbp->td_list.prev,
- struct uhci_td, list);
- toggle = uhci_toggle(td_token(pltd)) ^ 1;
- }
-
- head = &urbp->queue_list;
- tmp = head->next;
- while (head != tmp) {
- struct urb_priv *turbp;
-
- turbp = list_entry(tmp, struct urb_priv, queue_list);
- tmp = tmp->next;
-
- if (!turbp->queued)
- break;
- toggle = uhci_fixup_toggle(turbp->urb, toggle);
- }
-
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), toggle);
- }
-
- if (urbp->queued) {
- /* We're somewhere in the middle (or end). The case where
- * we're at the head is handled in uhci_remove_qh(). */
- purbp = list_entry(urbp->queue_list.prev, struct urb_priv,
- queue_list);
-
- pltd = list_entry(purbp->td_list.prev, struct uhci_td, list);
- if (nurbp->queued)
- pltd->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
- else
- /* The next URB happens to be the beginning, so */
- /* we're the last, end the chain */
- pltd->link = UHCI_PTR_TERM;
- }
-
- /* urbp->queue_list is handled in uhci_remove_qh() */
-}
-
-static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp;
-
- urbp = kmem_cache_alloc(uhci_up_cachep, SLAB_ATOMIC);
- if (!urbp)
- return NULL;
-
- memset((void *)urbp, 0, sizeof(*urbp));
-
- urbp->inserttime = jiffies;
- urbp->fsbrtime = jiffies;
- urbp->urb = urb;
-
- INIT_LIST_HEAD(&urbp->td_list);
- INIT_LIST_HEAD(&urbp->queue_list);
- INIT_LIST_HEAD(&urbp->urb_list);
-
- list_add_tail(&urbp->urb_list, &uhci->urb_list);
-
- urb->hcpriv = urbp;
-
- return urbp;
-}
-
-static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-
- td->urb = urb;
-
- list_add_tail(&td->list, &urbp->td_list);
-}
-
-static void uhci_remove_td_from_urb(struct uhci_td *td)
-{
- if (list_empty(&td->list))
- return;
-
- list_del_init(&td->list);
-
- td->urb = NULL;
-}
-
-static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct list_head *head, *tmp;
- struct urb_priv *urbp;
- unsigned int age;
-
- urbp = (struct urb_priv *)urb->hcpriv;
- if (!urbp)
- return;
-
- if (!list_empty(&urbp->urb_list))
- dev_warn(uhci_dev(uhci), "urb %p still on uhci->urb_list "
- "or uhci->remove_list!\n", urb);
-
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->td_remove_age) {
- uhci_free_pending_tds(uhci);
- uhci->td_remove_age = age;
- }
-
- /* Check to see if the remove list is empty. Set the IOC bit */
- /* to force an interrupt so we can remove the TD's*/
- if (list_empty(&uhci->td_remove_list))
- uhci_set_next_interrupt(uhci);
-
- head = &urbp->td_list;
- tmp = head->next;
- while (tmp != head) {
- struct uhci_td *td = list_entry(tmp, struct uhci_td, list);
-
- tmp = tmp->next;
-
- uhci_remove_td_from_urb(td);
- uhci_remove_td(uhci, td);
- list_add(&td->remove_list, &uhci->td_remove_list);
- }
-
- urb->hcpriv = NULL;
- kmem_cache_free(uhci_up_cachep, urbp);
-}
-
-static void uhci_inc_fsbr(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-
- if ((!(urb->transfer_flags & URB_NO_FSBR)) && !urbp->fsbr) {
- urbp->fsbr = 1;
- if (!uhci->fsbr++ && !uhci->fsbrtimeout)
- uhci->skel_term_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
- }
-}
-
-static void uhci_dec_fsbr(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-
- if ((!(urb->transfer_flags & URB_NO_FSBR)) && urbp->fsbr) {
- urbp->fsbr = 0;
- if (!--uhci->fsbr)
- uhci->fsbrtimeout = jiffies + FSBR_DELAY;
- }
-}
-
-/*
- * Map status to standard result codes
- *
- * <status> is (td->status & 0xF60000) [a.k.a. uhci_status_bits(td->status)]
- * Note: status does not include the TD_CTRL_NAK bit.
- * <dir_out> is True for output TDs and False for input TDs.
- */
-static int uhci_map_status(int status, int dir_out)
-{
- if (!status)
- return 0;
- if (status & TD_CTRL_BITSTUFF) /* Bitstuff error */
- return -EPROTO;
- if (status & TD_CTRL_CRCTIMEO) { /* CRC/Timeout */
- if (dir_out)
- return -EPROTO;
- else
- return -EILSEQ;
- }
- if (status & TD_CTRL_BABBLE) /* Babble */
- return -EOVERFLOW;
- if (status & TD_CTRL_DBUFERR) /* Buffer error */
- return -ENOSR;
- if (status & TD_CTRL_STALLED) /* Stalled */
- return -EPIPE;
- WARN_ON(status & TD_CTRL_ACTIVE); /* Active */
- return 0;
-}
-
-/*
- * Control transfers
- */
-static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct uhci_td *td;
- struct uhci_qh *qh, *skelqh;
- unsigned long destination, status;
- int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- int len = urb->transfer_buffer_length;
- dma_addr_t data = urb->transfer_dma;
-
- /* The "pipe" thing contains the destination in bits 8--18 */
- destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP;
-
- /* 3 errors */
- status = TD_CTRL_ACTIVE | uhci_maxerr(3);
- if (urb->dev->speed == USB_SPEED_LOW)
- status |= TD_CTRL_LS;
-
- /*
- * Build the TD for the control request setup packet
- */
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(7),
- urb->setup_dma);
-
- /*
- * If direction is "send", change the packet ID from SETUP (0x2D)
- * to OUT (0xE1). Else change it from SETUP to IN (0x69) and
- * set Short Packet Detect (SPD) for all data packets.
- */
- if (usb_pipeout(urb->pipe))
- destination ^= (USB_PID_SETUP ^ USB_PID_OUT);
- else {
- destination ^= (USB_PID_SETUP ^ USB_PID_IN);
- status |= TD_CTRL_SPD;
- }
-
- /*
- * Build the DATA TD's
- */
- while (len > 0) {
- int pktsze = len;
-
- if (pktsze > maxsze)
- pktsze = maxsze;
-
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- /* Alternate Data0/1 (start with Data1) */
- destination ^= TD_TOKEN_TOGGLE;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1),
- data);
-
- data += pktsze;
- len -= pktsze;
- }
-
- /*
- * Build the final TD for control status
- */
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- /*
- * It's IN if the pipe is an output pipe or we're not expecting
- * data back.
- */
- destination &= ~TD_TOKEN_PID_MASK;
- if (usb_pipeout(urb->pipe) || !urb->transfer_buffer_length)
- destination |= USB_PID_IN;
- else
- destination |= USB_PID_OUT;
-
- destination |= TD_TOKEN_TOGGLE; /* End in Data1 */
-
- status &= ~TD_CTRL_SPD;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status | TD_CTRL_IOC,
- destination | uhci_explen(UHCI_NULL_DATA_SIZE), 0);
-
- qh = uhci_alloc_qh(uhci, urb->dev);
- if (!qh)
- return -ENOMEM;
-
- urbp->qh = qh;
- qh->urbp = urbp;
-
- uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
-
- /* Low-speed transfers get a different queue, and won't hog the bus */
- if (urb->dev->speed == USB_SPEED_LOW)
- skelqh = uhci->skel_ls_control_qh;
- else {
- skelqh = uhci->skel_fs_control_qh;
- uhci_inc_fsbr(uhci, urb);
- }
-
- if (eurb)
- uhci_append_queued_urb(uhci, eurb, urb);
- else
- uhci_insert_qh(uhci, skelqh, urb);
-
- return -EINPROGRESS;
-}
-
-/*
- * If control-IN transfer was short, the status packet wasn't sent.
- * This routine changes the element pointer in the QH to point at the
- * status TD. It's safe to do this even while the QH is live, because
- * the hardware only updates the element pointer following a successful
- * transfer. The inactive TD for the short packet won't cause an update,
- * so the pointer won't get overwritten. The next time the controller
- * sees this QH, it will send the status packet.
- */
-static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct uhci_td *td;
-
- urbp->short_control_packet = 1;
-
- td = list_entry(urbp->td_list.prev, struct uhci_td, list);
- urbp->qh->element = td->dma_handle;
-
- return -EINPROGRESS;
-}
-
-
-static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct list_head *tmp, *head;
- struct urb_priv *urbp = urb->hcpriv;
- struct uhci_td *td;
- unsigned int status;
- int ret = 0;
-
- if (list_empty(&urbp->td_list))
- return -EINVAL;
-
- head = &urbp->td_list;
-
- if (urbp->short_control_packet) {
- tmp = head->prev;
- goto status_stage;
- }
-
- tmp = head->next;
- td = list_entry(tmp, struct uhci_td, list);
-
- /* The first TD is the SETUP stage, check the status, but skip */
- /* the count */
- status = uhci_status_bits(td_status(td));
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- if (status)
- goto td_error;
-
- urb->actual_length = 0;
-
- /* The rest of the TD's (but the last) are data */
- tmp = tmp->next;
- while (tmp != head && tmp->next != head) {
- td = list_entry(tmp, struct uhci_td, list);
-
- tmp = tmp->next;
-
- status = uhci_status_bits(td_status(td));
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- urb->actual_length += uhci_actual_length(td_status(td));
-
- if (status)
- goto td_error;
-
- /* Check to see if we received a short packet */
- if (uhci_actual_length(td_status(td)) < uhci_expected_length(td_token(td))) {
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- ret = -EREMOTEIO;
- goto err;
- }
-
- if (uhci_packetid(td_token(td)) == USB_PID_IN)
- return usb_control_retrigger_status(uhci, urb);
- else
- return 0;
- }
- }
-
-status_stage:
- td = list_entry(tmp, struct uhci_td, list);
-
- /* Control status stage */
- status = td_status(td);
-
-#ifdef I_HAVE_BUGGY_APC_BACKUPS
- /* APC BackUPS Pro kludge */
- /* It tries to send all of the descriptor instead of the amount */
- /* we requested */
- if (status & TD_CTRL_IOC && /* IOC is masked out by uhci_status_bits */
- status & TD_CTRL_ACTIVE &&
- status & TD_CTRL_NAK)
- return 0;
-#endif
-
- status = uhci_status_bits(status);
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- if (status)
- goto td_error;
-
- return 0;
-
-td_error:
- ret = uhci_map_status(status, uhci_packetout(td_token(td)));
-
-err:
- if ((debug == 1 && ret != -EPIPE) || debug > 1) {
- /* Some debugging code */
- dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n",
- __FUNCTION__, status);
-
- if (errbuf) {
- /* Print the chain for debugging purposes */
- uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
-
- lprintk(errbuf);
- }
- }
-
- return ret;
-}
-
-/*
- * Common submit for bulk and interrupt
- */
-static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb, struct uhci_qh *skelqh)
-{
- struct uhci_td *td;
- struct uhci_qh *qh;
- unsigned long destination, status;
- int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- int len = urb->transfer_buffer_length;
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- dma_addr_t data = urb->transfer_dma;
-
- if (len < 0)
- return -EINVAL;
-
- /* The "pipe" thing contains the destination in bits 8--18 */
- destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
-
- status = uhci_maxerr(3) | TD_CTRL_ACTIVE;
- if (urb->dev->speed == USB_SPEED_LOW)
- status |= TD_CTRL_LS;
- if (usb_pipein(urb->pipe))
- status |= TD_CTRL_SPD;
-
- /*
- * Build the DATA TD's
- */
- do { /* Allow zero length packets */
- int pktsze = maxsze;
-
- if (pktsze >= len) {
- pktsze = len;
- if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
- status &= ~TD_CTRL_SPD;
- }
-
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) |
- (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
- data);
-
- data += pktsze;
- len -= maxsze;
-
- usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe));
- } while (len > 0);
-
- /*
- * URB_ZERO_PACKET means adding a 0-length packet, if direction
- * is OUT and the transfer_length was an exact multiple of maxsze,
- * hence (len = transfer_length - N * maxsze) == 0
- * however, if transfer_length == 0, the zero packet was already
- * prepared above.
- */
- if (usb_pipeout(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) &&
- !len && urb->transfer_buffer_length) {
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) |
- (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
- data);
-
- usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe));
- }
-
- /* Set the interrupt-on-completion flag on the last packet.
- * A more-or-less typical 4 KB URB (= size of one memory page)
- * will require about 3 ms to transfer; that's a little on the
- * fast side but not enough to justify delaying an interrupt
- * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
- * flag setting. */
- td->status |= cpu_to_le32(TD_CTRL_IOC);
-
- qh = uhci_alloc_qh(uhci, urb->dev);
- if (!qh)
- return -ENOMEM;
-
- urbp->qh = qh;
- qh->urbp = urbp;
-
- /* Always breadth first */
- uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
-
- if (eurb)
- uhci_append_queued_urb(uhci, eurb, urb);
- else
- uhci_insert_qh(uhci, skelqh, urb);
-
- return -EINPROGRESS;
-}
-
-/*
- * Common result for bulk and interrupt
- */
-static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct list_head *tmp, *head;
- struct urb_priv *urbp = urb->hcpriv;
- struct uhci_td *td;
- unsigned int status = 0;
- int ret = 0;
-
- urb->actual_length = 0;
-
- head = &urbp->td_list;
- tmp = head->next;
- while (tmp != head) {
- td = list_entry(tmp, struct uhci_td, list);
-
- tmp = tmp->next;
-
- status = uhci_status_bits(td_status(td));
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- urb->actual_length += uhci_actual_length(td_status(td));
-
- if (status)
- goto td_error;
-
- if (uhci_actual_length(td_status(td)) < uhci_expected_length(td_token(td))) {
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- ret = -EREMOTEIO;
- goto err;
- } else
- return 0;
- }
- }
-
- return 0;
-
-td_error:
- ret = uhci_map_status(status, uhci_packetout(td_token(td)));
- if (ret == -EPIPE)
- /* endpoint has stalled - mark it halted */
- usb_endpoint_halt(urb->dev, uhci_endpoint(td_token(td)),
- uhci_packetout(td_token(td)));
-
-err:
- /*
- * Enable this chunk of code if you want to see some more debugging.
- * But be careful, it has the tendancy to starve out khubd and prevent
- * disconnects from happening successfully if you have a slow debug
- * log interface (like a serial console.
- */
-#if 0
- if ((debug == 1 && ret != -EPIPE) || debug > 1) {
- /* Some debugging code */
- dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n",
- __FUNCTION__, status);
-
- if (errbuf) {
- /* Print the chain for debugging purposes */
- uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
-
- lprintk(errbuf);
- }
- }
-#endif
- return ret;
-}
-
-static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
-{
- int ret;
-
- /* Can't have low-speed bulk transfers */
- if (urb->dev->speed == USB_SPEED_LOW)
- return -EINVAL;
-
- ret = uhci_submit_common(uhci, urb, eurb, uhci->skel_bulk_qh);
- if (ret == -EINPROGRESS)
- uhci_inc_fsbr(uhci, urb);
-
- return ret;
-}
-
-static inline int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
-{
- /* USB 1.1 interrupt transfers only involve one packet per interval;
- * that's the uhci_submit_common() "breadth first" policy. Drivers
- * can submit urbs of any length, but longer ones might need many
- * intervals to complete.
- */
- return uhci_submit_common(uhci, urb, eurb, uhci->skelqh[__interval_to_skel(urb->interval)]);
-}
-
-/*
- * Isochronous transfers
- */
-static int isochronous_find_limits(struct uhci_hcd *uhci, struct urb *urb, unsigned int *start, unsigned int *end)
-{
- struct urb *last_urb = NULL;
- struct list_head *tmp, *head;
- int ret = 0;
-
- head = &uhci->urb_list;
- tmp = head->next;
- while (tmp != head) {
- struct urb_priv *up = list_entry(tmp, struct urb_priv, urb_list);
- struct urb *u = up->urb;
-
- tmp = tmp->next;
-
- /* look for pending URB's with identical pipe handle */
- if ((urb->pipe == u->pipe) && (urb->dev == u->dev) &&
- (u->status == -EINPROGRESS) && (u != urb)) {
- if (!last_urb)
- *start = u->start_frame;
- last_urb = u;
- }
- }
-
- if (last_urb) {
- *end = (last_urb->start_frame + last_urb->number_of_packets *
- last_urb->interval) & (UHCI_NUMFRAMES-1);
- ret = 0;
- } else
- ret = -1; /* no previous urb found */
-
- return ret;
-}
-
-static int isochronous_find_start(struct uhci_hcd *uhci, struct urb *urb)
-{
- int limits;
- unsigned int start = 0, end = 0;
-
- if (urb->number_of_packets > 900) /* 900? Why? */
- return -EFBIG;
-
- limits = isochronous_find_limits(uhci, urb, &start, &end);
-
- if (urb->transfer_flags & URB_ISO_ASAP) {
- if (limits) {
- int curframe;
-
- curframe = uhci_get_current_frame_number(uhci) % UHCI_NUMFRAMES;
- urb->start_frame = (curframe + 10) % UHCI_NUMFRAMES;
- } else
- urb->start_frame = end;
- } else {
- urb->start_frame %= UHCI_NUMFRAMES;
- /* FIXME: Sanity check */
- }
-
- return 0;
-}
-
-/*
- * Isochronous transfers
- */
-static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct uhci_td *td;
- int i, ret, frame;
- int status, destination;
-
- status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
- destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
-
- ret = isochronous_find_start(uhci, urb);
- if (ret)
- return ret;
-
- frame = urb->start_frame;
- for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) {
- if (!urb->iso_frame_desc[i].length)
- continue;
-
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length - 1),
- urb->transfer_dma + urb->iso_frame_desc[i].offset);
-
- if (i + 1 >= urb->number_of_packets)
- td->status |= cpu_to_le32(TD_CTRL_IOC);
-
- uhci_insert_td_frame_list(uhci, td, frame);
- }
-
- return -EINPROGRESS;
-}
-
-static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct list_head *tmp, *head;
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- int status;
- int i, ret = 0;
-
- urb->actual_length = 0;
-
- i = 0;
- head = &urbp->td_list;
- tmp = head->next;
- while (tmp != head) {
- struct uhci_td *td = list_entry(tmp, struct uhci_td, list);
- int actlength;
-
- tmp = tmp->next;
-
- if (td_status(td) & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- actlength = uhci_actual_length(td_status(td));
- urb->iso_frame_desc[i].actual_length = actlength;
- urb->actual_length += actlength;
-
- status = uhci_map_status(uhci_status_bits(td_status(td)),
- usb_pipeout(urb->pipe));
- urb->iso_frame_desc[i].status = status;
- if (status) {
- urb->error_count++;
- ret = status;
- }
-
- i++;
- }
-
- return ret;
-}
-
-static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct list_head *tmp, *head;
-
- /* We don't match Isoc transfers since they are special */
- if (usb_pipeisoc(urb->pipe))
- return NULL;
-
- head = &uhci->urb_list;
- tmp = head->next;
- while (tmp != head) {
- struct urb_priv *up = list_entry(tmp, struct urb_priv, urb_list);
- struct urb *u = up->urb;
-
- tmp = tmp->next;
-
- if (u->dev == urb->dev && u->status == -EINPROGRESS) {
- /* For control, ignore the direction */
- if (usb_pipecontrol(urb->pipe) &&
- (u->pipe & ~USB_DIR_IN) == (urb->pipe & ~USB_DIR_IN))
- return u;
- else if (u->pipe == urb->pipe)
- return u;
- }
- }
-
- return NULL;
-}
-
-static int uhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, int mem_flags)
-{
- int ret = -EINVAL;
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- unsigned long flags;
- struct urb *eurb;
- int bustime;
-
- spin_lock_irqsave(&uhci->schedule_lock, flags);
-
- if (urb->status != -EINPROGRESS) /* URB already unlinked! */
- goto out;
-
- eurb = uhci_find_urb_ep(uhci, urb);
-
- if (!uhci_alloc_urb_priv(uhci, urb)) {
- ret = -ENOMEM;
- goto out;
- }
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- ret = uhci_submit_control(uhci, urb, eurb);
- break;
- case PIPE_INTERRUPT:
- if (!eurb) {
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0)
- ret = bustime;
- else {
- ret = uhci_submit_interrupt(uhci, urb, eurb);
- if (ret == -EINPROGRESS)
- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
- }
- } else { /* inherit from parent */
- urb->bandwidth = eurb->bandwidth;
- ret = uhci_submit_interrupt(uhci, urb, eurb);
- }
- break;
- case PIPE_BULK:
- ret = uhci_submit_bulk(uhci, urb, eurb);
- break;
- case PIPE_ISOCHRONOUS:
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0) {
- ret = bustime;
- break;
- }
-
- ret = uhci_submit_isochronous(uhci, urb);
- if (ret == -EINPROGRESS)
- usb_claim_bandwidth(urb->dev, urb, bustime, 1);
- break;
- }
-
- if (ret != -EINPROGRESS) {
- /* Submit failed, so delete it from the urb_list */
- struct urb_priv *urbp = urb->hcpriv;
-
- list_del_init(&urbp->urb_list);
- uhci_destroy_urb_priv(uhci, urb);
- } else
- ret = 0;
+#include "uhci-debug.c"
+#include "uhci-q.c"
+#include "uhci-hub.c"
-out:
- spin_unlock_irqrestore(&uhci->schedule_lock, flags);
- return ret;
-}
+extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
/*
- * Return the result of a transfer
+ * Finish up a host controller reset and update the recorded state.
*/
-static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb)
-{
- int ret = -EINPROGRESS;
- struct urb_priv *urbp;
-
- spin_lock(&urb->lock);
-
- urbp = (struct urb_priv *)urb->hcpriv;
-
- if (urb->status != -EINPROGRESS) /* URB already dequeued */
- goto out;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- ret = uhci_result_control(uhci, urb);
- break;
- case PIPE_BULK:
- case PIPE_INTERRUPT:
- ret = uhci_result_common(uhci, urb);
- break;
- case PIPE_ISOCHRONOUS:
- ret = uhci_result_isochronous(uhci, urb);
- break;
- }
-
- if (ret == -EINPROGRESS)
- goto out;
- urb->status = ret;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- case PIPE_ISOCHRONOUS:
- /* Release bandwidth for Interrupt or Isoc. transfers */
- if (urb->bandwidth)
- usb_release_bandwidth(urb->dev, urb, 1);
- uhci_unlink_generic(uhci, urb);
- break;
- case PIPE_INTERRUPT:
- /* Release bandwidth for Interrupt or Isoc. transfers */
- /* Make sure we don't release if we have a queued URB */
- if (list_empty(&urbp->queue_list) && urb->bandwidth)
- usb_release_bandwidth(urb->dev, urb, 0);
- else
- /* bandwidth was passed on to queued URB, */
- /* so don't let usb_unlink_urb() release it */
- urb->bandwidth = 0;
- uhci_unlink_generic(uhci, urb);
- break;
- default:
- dev_info(uhci_dev(uhci), "%s: unknown pipe type %d "
- "for urb %p\n",
- __FUNCTION__, usb_pipetype(urb->pipe), urb);
- }
-
- /* Move it from uhci->urb_list to uhci->complete_list */
- uhci_moveto_complete(uhci, urbp);
-
-out:
- spin_unlock(&urb->lock);
-}
-
-static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct list_head *head, *tmp;
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- int prevactive = 1;
-
- uhci_dec_fsbr(uhci, urb); /* Safe since it checks */
-
- /*
- * Now we need to find out what the last successful toggle was
- * so we can update the local data toggle for the next transfer
- *
- * There's 3 way's the last successful completed TD is found:
- *
- * 1) The TD is NOT active and the actual length < expected length
- * 2) The TD is NOT active and it's the last TD in the chain
- * 3) The TD is active and the previous TD is NOT active
- *
- * Control and Isochronous ignore the toggle, so this is safe
- * for all types
- */
- head = &urbp->td_list;
- tmp = head->next;
- while (tmp != head) {
- struct uhci_td *td = list_entry(tmp, struct uhci_td, list);
-
- tmp = tmp->next;
-
- if (!(td_status(td) & TD_CTRL_ACTIVE) &&
- (uhci_actual_length(td_status(td)) < uhci_expected_length(td_token(td)) ||
- tmp == head))
- usb_settoggle(urb->dev, uhci_endpoint(td_token(td)),
- uhci_packetout(td_token(td)),
- uhci_toggle(td_token(td)) ^ 1);
- else if ((td_status(td) & TD_CTRL_ACTIVE) && !prevactive)
- usb_settoggle(urb->dev, uhci_endpoint(td_token(td)),
- uhci_packetout(td_token(td)),
- uhci_toggle(td_token(td)));
-
- prevactive = td_status(td) & TD_CTRL_ACTIVE;
- }
-
- uhci_delete_queued_urb(uhci, urb);
-
- /* The interrupt loop will reclaim the QH's */
- uhci_remove_qh(uhci, urbp->qh);
- urbp->qh = NULL;
-}
-
-static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+static void finish_reset(struct uhci_hcd *uhci)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- unsigned long flags;
- struct urb_priv *urbp;
- unsigned int age;
-
- spin_lock_irqsave(&uhci->schedule_lock, flags);
- urbp = urb->hcpriv;
- if (!urbp) /* URB was never linked! */
- goto done;
- list_del_init(&urbp->urb_list);
-
- uhci_unlink_generic(uhci, urb);
+ int port;
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->urb_remove_age) {
- uhci_remove_pending_urbps(uhci);
- uhci->urb_remove_age = age;
- }
-
- /* If we're the first, set the next interrupt bit */
- if (list_empty(&uhci->urb_remove_list))
- uhci_set_next_interrupt(uhci);
- list_add_tail(&urbp->urb_list, &uhci->urb_remove_list);
-
-done:
- spin_unlock_irqrestore(&uhci->schedule_lock, flags);
- return 0;
-}
-
-static int uhci_fsbr_timeout(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct list_head *head, *tmp;
- int count = 0;
-
- uhci_dec_fsbr(uhci, urb);
-
- urbp->fsbr_timeout = 1;
-
- /*
- * Ideally we would want to fix qh->element as well, but it's
- * read/write by the HC, so that can introduce a race. It's not
- * really worth the hassle
+ /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
+ * bits in the port status and control registers.
+ * We have to clear them by hand.
*/
+ for (port = 0; port < uhci->rh_numports; ++port)
+ outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
- head = &urbp->td_list;
- tmp = head->next;
- while (tmp != head) {
- struct uhci_td *td = list_entry(tmp, struct uhci_td, list);
-
- tmp = tmp->next;
-
- /*
- * Make sure we don't do the last one (since it'll have the
- * TERM bit set) as well as we skip every so many TD's to
- * make sure it doesn't hog the bandwidth
- */
- if (tmp != head && (count % DEPTH_INTERVAL) == (DEPTH_INTERVAL - 1))
- td->link |= UHCI_PTR_DEPTH;
-
- count++;
- }
-
- return 0;
+ uhci->port_c_suspend = uhci->suspended_ports =
+ uhci->resuming_ports = 0;
+ uhci->rh_state = UHCI_RH_RESET;
+ uhci->is_stopped = UHCI_IS_STOPPED;
+ uhci_to_hcd(uhci)->state = HC_STATE_HALT;
+ uhci_to_hcd(uhci)->poll_rh = 0;
}
/*
- * uhci_get_current_frame_number()
- *
- * returns the current frame number for a USB bus/controller.
+ * Last rites for a defunct/nonfunctional controller
+ * or one we don't want to use any more.
*/
-static int uhci_get_current_frame_number(struct uhci_hcd *uhci)
+static void hc_died(struct uhci_hcd *uhci)
{
- return inw(uhci->io_addr + USBFRNUM);
+ uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+ finish_reset(uhci);
+ uhci->hc_inaccessible = 1;
}
-static int init_stall_timer(struct usb_hcd *hcd);
-
-static void stall_callback(unsigned long ptr)
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed. In either case we can't be sure of its previous state.
+ */
+static void check_and_reset_hc(struct uhci_hcd *uhci)
{
- struct usb_hcd *hcd = (struct usb_hcd *)ptr;
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- struct list_head list, *tmp, *head;
- unsigned long flags;
-
- INIT_LIST_HEAD(&list);
-
- spin_lock_irqsave(&uhci->schedule_lock, flags);
- if (!list_empty(&uhci->urb_remove_list) &&
- uhci_get_current_frame_number(uhci) != uhci->urb_remove_age) {
- uhci_remove_pending_urbps(uhci);
- uhci_finish_completion(hcd, NULL);
- }
+ if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
+ finish_reset(uhci);
+}
- head = &uhci->urb_list;
- tmp = head->next;
- while (tmp != head) {
- struct urb_priv *up = list_entry(tmp, struct urb_priv, urb_list);
- struct urb *u = up->urb;
+/*
+ * Store the basic register settings needed by the controller.
+ */
+static void configure_hc(struct uhci_hcd *uhci)
+{
+ /* Set the frame length to the default: 1 ms exactly */
+ outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
- tmp = tmp->next;
+ /* Store the frame list base address */
+ outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
- spin_lock(&u->lock);
+ /* Set the current frame number */
+ outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
- /* Check if the FSBR timed out */
- if (up->fsbr && !up->fsbr_timeout && time_after_eq(jiffies, up->fsbrtime + IDLE_TIMEOUT))
- uhci_fsbr_timeout(uhci, u);
+ /* Mark controller as not halted before we enable interrupts */
+ uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
+ mb();
- /* Check if the URB timed out */
- if (u->timeout && u->status == -EINPROGRESS &&
- time_after_eq(jiffies, up->inserttime + u->timeout)) {
- u->status = -ETIMEDOUT;
- list_move_tail(&up->urb_list, &list);
- }
+ /* Enable PIRQ */
+ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
+ USBLEGSUP_DEFAULT);
+}
- spin_unlock(&u->lock);
- }
- spin_unlock_irqrestore(&uhci->schedule_lock, flags);
- head = &list;
- tmp = head->next;
- while (tmp != head) {
- struct urb_priv *up = list_entry(tmp, struct urb_priv, urb_list);
- struct urb *u = up->urb;
+static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
+{
+ int port;
- tmp = tmp->next;
+ switch (to_pci_dev(uhci_dev(uhci))->vendor) {
+ default:
+ break;
- uhci_urb_dequeue(hcd, u);
- }
+ case PCI_VENDOR_ID_GENESYS:
+ /* Genesys Logic's GL880S controllers don't generate
+ * resume-detect interrupts.
+ */
+ return 1;
- /* Really disable FSBR */
- if (!uhci->fsbr && uhci->fsbrtimeout && time_after_eq(jiffies, uhci->fsbrtimeout)) {
- uhci->fsbrtimeout = 0;
- uhci->skel_term_qh->link = UHCI_PTR_TERM;
+ case PCI_VENDOR_ID_INTEL:
+ /* Some of Intel's USB controllers have a bug that causes
+ * resume-detect interrupts if any port has an over-current
+ * condition. To make matters worse, some motherboards
+ * hardwire unused USB ports' over-current inputs active!
+ * To prevent problems, we will not enable resume-detect
+ * interrupts if any ports are OC.
+ */
+ for (port = 0; port < uhci->rh_numports; ++port) {
+ if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+ USBPORTSC_OC)
+ return 1;
+ }
+ break;
}
-
- /* Poll for and perform state transitions */
- hc_state_transitions(uhci);
-
- init_stall_timer(hcd);
-}
-
-static int init_stall_timer(struct usb_hcd *hcd)
-{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
-
- init_timer(&uhci->stall_timer);
- uhci->stall_timer.function = stall_callback;
- uhci->stall_timer.data = (unsigned long)hcd;
- uhci->stall_timer.expires = jiffies + (HZ / 10);
- add_timer(&uhci->stall_timer);
-
return 0;
}
-static void uhci_free_pending_qhs(struct uhci_hcd *uhci)
+static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
+__releases(uhci->lock)
+__acquires(uhci->lock)
{
- struct list_head *tmp, *head;
-
- head = &uhci->qh_remove_list;
- tmp = head->next;
- while (tmp != head) {
- struct uhci_qh *qh = list_entry(tmp, struct uhci_qh, remove_list);
+ int auto_stop;
+ int int_enable;
- tmp = tmp->next;
+ auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
+ dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
+ (auto_stop ? " (auto-stop)" : ""));
- list_del_init(&qh->remove_list);
-
- uhci_free_qh(uhci, qh);
+ /* If we get a suspend request when we're already auto-stopped
+ * then there's nothing to do.
+ */
+ if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
+ uhci->rh_state = new_state;
+ return;
}
-}
-static void uhci_free_pending_tds(struct uhci_hcd *uhci)
-{
- struct list_head *tmp, *head;
-
- head = &uhci->td_remove_list;
- tmp = head->next;
- while (tmp != head) {
- struct uhci_td *td = list_entry(tmp, struct uhci_td, remove_list);
+ /* Enable resume-detect interrupts if they work.
+ * Then enter Global Suspend mode, still configured.
+ */
+ uhci->working_RD = 1;
+ int_enable = USBINTR_RESUME;
+ if (resume_detect_interrupts_are_broken(uhci)) {
+ uhci->working_RD = int_enable = 0;
+ }
+ outw(int_enable, uhci->io_addr + USBINTR);
+ outw(USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD);
+ mb();
+ udelay(5);
+
+ /* If we're auto-stopping then no devices have been attached
+ * for a while, so there shouldn't be any active URBs and the
+ * controller should stop after a few microseconds. Otherwise
+ * we will give the controller one frame to stop.
+ */
+ if (!auto_stop && !(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) {
+ uhci->rh_state = UHCI_RH_SUSPENDING;
+ spin_unlock_irq(&uhci->lock);
+ msleep(1);
+ spin_lock_irq(&uhci->lock);
+ if (uhci->hc_inaccessible) /* Died */
+ return;
+ }
+ if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
+ dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
- tmp = tmp->next;
+ uhci_get_current_frame_number(uhci);
+ smp_wmb();
- list_del_init(&td->remove_list);
+ uhci->rh_state = new_state;
+ uhci->is_stopped = UHCI_IS_STOPPED;
+ uhci_to_hcd(uhci)->poll_rh = !int_enable;
- uhci_free_td(uhci, td);
- }
+ uhci_scan_schedule(uhci, NULL);
}
-static void uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
+static void start_rh(struct uhci_hcd *uhci)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
-
- uhci_destroy_urb_priv(uhci, urb);
+ uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
+ uhci->is_stopped = 0;
+ smp_wmb();
- spin_unlock(&uhci->schedule_lock);
- usb_hcd_giveback_urb(hcd, urb, regs);
- spin_lock(&uhci->schedule_lock);
+ /* Mark it configured and running with a 64-byte max packet.
+ * All interrupts are enabled, even though RESUME won't do anything.
+ */
+ outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, uhci->io_addr + USBCMD);
+ outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
+ uhci->io_addr + USBINTR);
+ mb();
+ uhci->rh_state = UHCI_RH_RUNNING;
+ uhci_to_hcd(uhci)->poll_rh = 1;
}
-static void uhci_finish_completion(struct usb_hcd *hcd, struct pt_regs *regs)
+static void wakeup_rh(struct uhci_hcd *uhci)
+__releases(uhci->lock)
+__acquires(uhci->lock)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- struct list_head *tmp, *head;
-
- head = &uhci->complete_list;
- tmp = head->next;
- while (tmp != head) {
- struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
- struct urb *urb = urbp->urb;
+ dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
+ uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
+ " (auto-start)" : "");
- list_del_init(&urbp->urb_list);
- uhci_finish_urb(hcd, urb, regs);
+ /* If we are auto-stopped then no devices are attached so there's
+ * no need for wakeup signals. Otherwise we send Global Resume
+ * for 20 ms.
+ */
+ if (uhci->rh_state == UHCI_RH_SUSPENDED) {
+ uhci->rh_state = UHCI_RH_RESUMING;
+ outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
+ uhci->io_addr + USBCMD);
+ spin_unlock_irq(&uhci->lock);
+ msleep(20);
+ spin_lock_irq(&uhci->lock);
+ if (uhci->hc_inaccessible) /* Died */
+ return;
- head = &uhci->complete_list;
- tmp = head->next;
+ /* End Global Resume and wait for EOP to be sent */
+ outw(USBCMD_CF, uhci->io_addr + USBCMD);
+ mb();
+ udelay(4);
+ if (inw(uhci->io_addr + USBCMD) & USBCMD_FGR)
+ dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
}
-}
-static void uhci_remove_pending_urbps(struct uhci_hcd *uhci)
-{
+ start_rh(uhci);
- /* Splice the urb_remove_list onto the end of the complete_list */
- list_splice_init(&uhci->urb_remove_list, uhci->complete_list.prev);
+ /* Restart root hub polling */
+ mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
}
static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- unsigned int io_addr = uhci->io_addr;
unsigned short status;
- struct list_head *tmp, *head;
- unsigned int age;
+ unsigned long flags;
/*
* Read the interrupt status, and write it back to clear the
* interrupt cause. Contrary to the UHCI specification, the
* "HC Halted" status bit is persistent: it is RO, not R/WC.
*/
- status = inw(io_addr + USBSTS);
+ status = inw(uhci->io_addr + USBSTS);
if (!(status & ~USBSTS_HCH)) /* shared interrupt, not mine */
return IRQ_NONE;
- outw(status, io_addr + USBSTS); /* Clear it */
+ outw(status, uhci->io_addr + USBSTS); /* Clear it */
if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
if (status & USBSTS_HSE)
if (status & USBSTS_HCPE)
dev_err(uhci_dev(uhci), "host controller process "
"error, something bad happened!\n");
- if ((status & USBSTS_HCH) && uhci->state > 0) {
- dev_err(uhci_dev(uhci), "host controller halted, "
+ if (status & USBSTS_HCH) {
+ spin_lock_irqsave(&uhci->lock, flags);
+ if (uhci->rh_state >= UHCI_RH_RUNNING) {
+ dev_err(uhci_dev(uhci),
+ "host controller halted, "
"very bad!\n");
- /* FIXME: Reset the controller, fix the offending TD */
+ hc_died(uhci);
+
+ /* Force a callback in case there are
+ * pending unlinks */
+ mod_timer(&hcd->rh_timer, jiffies);
+ }
+ spin_unlock_irqrestore(&uhci->lock, flags);
}
}
if (status & USBSTS_RD)
- uhci->resume_detect = 1;
-
- spin_lock(&uhci->schedule_lock);
-
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->qh_remove_age)
- uhci_free_pending_qhs(uhci);
- if (age != uhci->td_remove_age)
- uhci_free_pending_tds(uhci);
- if (age != uhci->urb_remove_age)
- uhci_remove_pending_urbps(uhci);
-
- if (list_empty(&uhci->urb_remove_list) &&
- list_empty(&uhci->td_remove_list) &&
- list_empty(&uhci->qh_remove_list))
- uhci_clear_next_interrupt(uhci);
- else
- uhci_set_next_interrupt(uhci);
-
- /* Walk the list of pending URB's to see which ones completed */
- head = &uhci->urb_list;
- tmp = head->next;
- while (tmp != head) {
- struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
- struct urb *urb = urbp->urb;
-
- tmp = tmp->next;
-
- /* Checks the status and does all of the magic necessary */
- uhci_transfer_result(uhci, urb);
+ usb_hcd_poll_rh_status(hcd);
+ else {
+ spin_lock_irqsave(&uhci->lock, flags);
+ uhci_scan_schedule(uhci, regs);
+ spin_unlock_irqrestore(&uhci->lock, flags);
}
- uhci_finish_completion(hcd, regs);
-
- spin_unlock(&uhci->schedule_lock);
-
- /* Wake up anyone waiting for an URB to complete */
- wake_up_all(&uhci->waitqh);
return IRQ_HANDLED;
}
-static void reset_hc(struct uhci_hcd *uhci)
-{
- unsigned int io_addr = uhci->io_addr;
-
- /* Global reset for 50ms */
- uhci->state = UHCI_RESET;
- outw(USBCMD_GRESET, io_addr + USBCMD);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout((HZ*50+999) / 1000);
- outw(0, io_addr + USBCMD);
-
- /* Another 10ms delay */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout((HZ*10+999) / 1000);
- uhci->resume_detect = 0;
-}
-
-static void suspend_hc(struct uhci_hcd *uhci)
-{
- unsigned int io_addr = uhci->io_addr;
-
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
- uhci->state = UHCI_SUSPENDED;
- uhci->resume_detect = 0;
- outw(USBCMD_EGSM, io_addr + USBCMD);
-}
-
-static void wakeup_hc(struct uhci_hcd *uhci)
+/*
+ * Store the current frame number in uhci->frame_number if the controller
+ * is runnning
+ */
+static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
{
- unsigned int io_addr = uhci->io_addr;
-
- switch (uhci->state) {
- case UHCI_SUSPENDED: /* Start the resume */
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
-
- /* Global resume for >= 20ms */
- outw(USBCMD_FGR | USBCMD_EGSM, io_addr + USBCMD);
- uhci->state = UHCI_RESUMING_1;
- uhci->state_end = jiffies + (20*HZ+999) / 1000;
- break;
-
- case UHCI_RESUMING_1: /* End global resume */
- uhci->state = UHCI_RESUMING_2;
- outw(0, io_addr + USBCMD);
- /* Falls through */
-
- case UHCI_RESUMING_2: /* Wait for EOP to be sent */
- if (inw(io_addr + USBCMD) & USBCMD_FGR)
- break;
-
- /* Run for at least 1 second, and
- * mark it configured with a 64-byte max packet */
- uhci->state = UHCI_RUNNING_GRACE;
- uhci->state_end = jiffies + HZ;
- outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP,
- io_addr + USBCMD);
- break;
-
- case UHCI_RUNNING_GRACE: /* Now allowed to suspend */
- uhci->state = UHCI_RUNNING;
- break;
-
- default:
- break;
- }
+ if (!uhci->is_stopped)
+ uhci->frame_number = inw(uhci->io_addr + USBFRNUM);
}
-static int ports_active(struct uhci_hcd *uhci)
+/*
+ * De-allocate all resources
+ */
+static void release_uhci(struct uhci_hcd *uhci)
{
- unsigned int io_addr = uhci->io_addr;
- int connection = 0;
int i;
- for (i = 0; i < uhci->rh_numports; i++)
- connection |= (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_CCS);
+ for (i = 0; i < UHCI_NUM_SKELQH; i++)
+ uhci_free_qh(uhci, uhci->skelqh[i]);
- return connection;
-}
+ uhci_free_td(uhci, uhci->term_td);
-static int suspend_allowed(struct uhci_hcd *uhci)
-{
- unsigned int io_addr = uhci->io_addr;
- int i;
+ dma_pool_destroy(uhci->qh_pool);
- if (to_pci_dev(uhci_dev(uhci))->vendor != PCI_VENDOR_ID_INTEL)
- return 1;
+ dma_pool_destroy(uhci->td_pool);
- /* Some of Intel's USB controllers have a bug that causes false
- * resume indications if any port has an over current condition.
- * To prevent problems, we will not allow a global suspend if
- * any ports are OC.
- *
- * Some motherboards using Intel's chipsets (but not using all
- * the USB ports) appear to hardwire the over current inputs active
- * to disable the USB ports.
- */
+ kfree(uhci->frame_cpu);
- /* check for over current condition on any port */
- for (i = 0; i < uhci->rh_numports; i++) {
- if (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_OC)
- return 0;
- }
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
- return 1;
+ debugfs_remove(uhci->dentry);
}
-static void hc_state_transitions(struct uhci_hcd *uhci)
+static int uhci_reset(struct usb_hcd *hcd)
{
- switch (uhci->state) {
- case UHCI_RUNNING:
-
- /* global suspend if nothing connected for 1 second */
- if (!ports_active(uhci) && suspend_allowed(uhci)) {
- uhci->state = UHCI_SUSPENDING_GRACE;
- uhci->state_end = jiffies + HZ;
- }
- break;
-
- case UHCI_SUSPENDING_GRACE:
- if (ports_active(uhci))
- uhci->state = UHCI_RUNNING;
- else if (time_after_eq(jiffies, uhci->state_end))
- suspend_hc(uhci);
- break;
-
- case UHCI_SUSPENDED:
-
- /* wakeup if requested by a device */
- if (uhci->resume_detect)
- wakeup_hc(uhci);
- break;
-
- case UHCI_RESUMING_1:
- case UHCI_RESUMING_2:
- case UHCI_RUNNING_GRACE:
- if (time_after_eq(jiffies, uhci->state_end))
- wakeup_hc(uhci);
- break;
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ unsigned io_size = (unsigned) hcd->rsrc_len;
+ int port;
+
+ uhci->io_addr = (unsigned long) hcd->rsrc_start;
+
+ /* The UHCI spec says devices must have 2 ports, and goes on to say
+ * they may have more but gives no way to determine how many there
+ * are. However according to the UHCI spec, Bit 7 of the port
+ * status and control register is always set to 1. So we try to
+ * use this to our advantage. Another common failure mode when
+ * a nonexistent register is addressed is to return all ones, so
+ * we test for that also.
+ */
+ for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
+ unsigned int portstatus;
- default:
+ portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2));
+ if (!(portstatus & 0x0080) || portstatus == 0xffff)
break;
}
-}
-
-static void start_hc(struct uhci_hcd *uhci)
-{
- unsigned int io_addr = uhci->io_addr;
- int timeout = 1000;
+ if (debug)
+ dev_info(uhci_dev(uhci), "detected %d ports\n", port);
- /*
- * Reset the HC - this will force us to get a
- * new notification of any already connected
- * ports due to the virtual disconnect that it
- * implies.
- */
- outw(USBCMD_HCRESET, io_addr + USBCMD);
- while (inw(io_addr + USBCMD) & USBCMD_HCRESET) {
- if (!--timeout) {
- dev_err(uhci_dev(uhci), "USBCMD_HCRESET timed out!\n");
- break;
- }
+ /* Anything greater than 7 is weird so we'll ignore it. */
+ if (port > UHCI_RH_MAXCHILD) {
+ dev_info(uhci_dev(uhci), "port count misdetected? "
+ "forcing to 2 ports\n");
+ port = 2;
}
+ uhci->rh_numports = port;
- /* Turn on all interrupts */
- outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
- io_addr + USBINTR);
-
- /* Start at frame 0 */
- outw(0, io_addr + USBFRNUM);
- outl(uhci->fl->dma_handle, io_addr + USBFLBASEADD);
-
- /* Run and mark it configured with a 64-byte max packet */
- uhci->state = UHCI_RUNNING_GRACE;
- uhci->state_end = jiffies + HZ;
- outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, io_addr + USBCMD);
-
- uhci->hcd.state = USB_STATE_RUNNING;
+ /* Kick BIOS off this hardware and reset if the controller
+ * isn't already safely quiescent.
+ */
+ check_and_reset_hc(uhci);
+ return 0;
}
-/*
- * De-allocate all resources..
+/* Make sure the controller is quiescent and that we're not using it
+ * any more. This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel. Hence we
+ * do not acquire the spinlock before shutting down the controller.
*/
-static void release_uhci(struct uhci_hcd *uhci)
-{
- int i;
-
- for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
- uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
-
- if (uhci->term_td) {
- uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
- }
-
- if (uhci->qh_pool) {
- dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
- }
-
- if (uhci->td_pool) {
- dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
- }
-
- if (uhci->fl) {
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
- }
-
-#ifdef CONFIG_PROC_FS
- if (uhci->proc_entry) {
- remove_proc_entry(uhci->hcd.self.bus_name, uhci_proc_root);
- uhci->proc_entry = NULL;
- }
-#endif
-}
-
-static int uhci_reset(struct usb_hcd *hcd)
+static void uhci_shutdown(struct pci_dev *pdev)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
- uhci->io_addr = (unsigned long) hcd->regs;
-
- /* Turn off all interrupts */
- outw(0, uhci->io_addr + USBINTR);
-
- /* Maybe kick BIOS off this hardware. Then reset, so we won't get
- * interrupts from any previous setup.
- */
- reset_hc(uhci);
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_DEFAULT);
- return 0;
+ hc_died(hcd_to_uhci(hcd));
}
/*
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int retval = -EBUSY;
- int i, port;
- unsigned io_size;
- dma_addr_t dma_handle;
- struct usb_device *udev;
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *ent;
-#endif
+ int i;
+ struct dentry *dentry;
- io_size = pci_resource_len(to_pci_dev(uhci_dev(uhci)), hcd->region);
+ hcd->uses_new_polling = 1;
-#ifdef CONFIG_PROC_FS
- ent = create_proc_entry(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_proc_root);
- if (!ent) {
- dev_err(uhci_dev(uhci), "couldn't create uhci proc entry\n");
+ dentry = debugfs_create_file(hcd->self.bus_name,
+ S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci,
+ &uhci_debug_operations);
+ if (!dentry) {
+ dev_err(uhci_dev(uhci),
+ "couldn't create uhci debugfs entry\n");
retval = -ENOMEM;
- goto err_create_proc_entry;
+ goto err_create_debug_entry;
}
-
- ent->data = uhci;
- ent->proc_fops = &uhci_proc_operations;
- ent->size = 0;
- uhci->proc_entry = ent;
-#endif
+ uhci->dentry = dentry;
uhci->fsbr = 0;
uhci->fsbrtimeout = 0;
- spin_lock_init(&uhci->schedule_lock);
+ spin_lock_init(&uhci->lock);
INIT_LIST_HEAD(&uhci->qh_remove_list);
INIT_LIST_HEAD(&uhci->td_remove_list);
init_waitqueue_head(&uhci->waitqh);
- uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- &dma_handle, 0);
- if (!uhci->fl) {
+ uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ &uhci->frame_dma_handle, 0);
+ if (!uhci->frame) {
dev_err(uhci_dev(uhci), "unable to allocate "
"consistent memory for frame list\n");
- goto err_alloc_fl;
+ goto err_alloc_frame;
}
+ memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
- memset((void *)uhci->fl, 0, sizeof(*uhci->fl));
-
- uhci->fl->dma_handle = dma_handle;
+ uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
+ GFP_KERNEL);
+ if (!uhci->frame_cpu) {
+ dev_err(uhci_dev(uhci), "unable to allocate "
+ "memory for frame pointers\n");
+ goto err_alloc_frame_cpu;
+ }
uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
sizeof(struct uhci_td), 16, 0);
goto err_create_qh_pool;
}
- /* Initialize the root hub */
-
- /* UHCI specs says devices must have 2 ports, but goes on to say */
- /* they may have more but give no way to determine how many they */
- /* have. However, according to the UHCI spec, Bit 7 is always set */
- /* to 1. So we try to use this to our advantage */
- for (port = 0; port < (io_size - 0x10) / 2; port++) {
- unsigned int portstatus;
-
- portstatus = inw(uhci->io_addr + 0x10 + (port * 2));
- if (!(portstatus & 0x0080))
- break;
- }
- if (debug)
- dev_info(uhci_dev(uhci), "detected %d ports\n", port);
-
- /* This is experimental so anything less than 2 or greater than 8 is */
- /* something weird and we'll ignore it */
- if (port < 2 || port > UHCI_RH_MAXCHILD) {
- dev_info(uhci_dev(uhci), "port count misdetected? "
- "forcing to 2 ports\n");
- port = 2;
- }
-
- uhci->rh_numports = port;
-
- hcd->self.root_hub = udev = usb_alloc_dev(NULL, &hcd->self, 0);
- if (!udev) {
- dev_err(uhci_dev(uhci), "unable to allocate root hub\n");
- goto err_alloc_root_hub;
- }
-
- uhci->term_td = uhci_alloc_td(uhci, udev);
+ uhci->term_td = uhci_alloc_td(uhci);
if (!uhci->term_td) {
dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
goto err_alloc_term_td;
}
for (i = 0; i < UHCI_NUM_SKELQH; i++) {
- uhci->skelqh[i] = uhci_alloc_qh(uhci, udev);
+ uhci->skelqh[i] = uhci_alloc_qh(uhci);
if (!uhci->skelqh[i]) {
dev_err(uhci_dev(uhci), "unable to allocate QH\n");
goto err_alloc_skelqh;
uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
/* This dummy TD is to work around a bug in Intel PIIX controllers */
- uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
+ uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
irq = 7;
/* Only place we don't use the frame list routines */
- uhci->fl->frame[i] = cpu_to_le32(uhci->skelqh[irq]->dma_handle);
+ uhci->frame[i] = UHCI_PTR_QH |
+ cpu_to_le32(uhci->skelqh[irq]->dma_handle);
}
- start_hc(uhci);
-
- init_stall_timer(hcd);
-
- udev->speed = USB_SPEED_FULL;
-
- if (usb_register_root_hub(udev, uhci_dev(uhci)) != 0) {
- dev_err(uhci_dev(uhci), "unable to start root hub\n");
- retval = -ENOMEM;
- goto err_start_root_hub;
- }
+ /*
+ * Some architectures require a full mb() to enforce completion of
+ * the memory writes above before the I/O transfers in configure_hc().
+ */
+ mb();
+ configure_hc(uhci);
+ start_rh(uhci);
return 0;
/*
* error exits:
*/
-err_start_root_hub:
- reset_hc(uhci);
-
- del_timer_sync(&uhci->stall_timer);
-
err_alloc_skelqh:
- for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
+ for (i = 0; i < UHCI_NUM_SKELQH; i++) {
+ if (uhci->skelqh[i])
uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
+ }
uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
err_alloc_term_td:
- usb_put_dev(udev);
- hcd->self.root_hub = NULL;
-
-err_alloc_root_hub:
dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
err_create_qh_pool:
dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
err_create_td_pool:
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
+ kfree(uhci->frame_cpu);
-err_alloc_fl:
-#ifdef CONFIG_PROC_FS
- remove_proc_entry(hcd->self.bus_name, uhci_proc_root);
- uhci->proc_entry = NULL;
+err_alloc_frame_cpu:
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
-err_create_proc_entry:
-#endif
+err_alloc_frame:
+ debugfs_remove(uhci->dentry);
+err_create_debug_entry:
return retval;
}
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- del_timer_sync(&uhci->stall_timer);
-
- /*
- * At this point, we're guaranteed that no new connects can be made
- * to this bus since there are no more parents
- */
-
- reset_hc(uhci);
-
- spin_lock_irq(&uhci->schedule_lock);
- uhci_free_pending_qhs(uhci);
- uhci_free_pending_tds(uhci);
- uhci_remove_pending_urbps(uhci);
- uhci_finish_completion(hcd, NULL);
+ spin_lock_irq(&uhci->lock);
+ if (!uhci->hc_inaccessible)
+ hc_died(uhci);
+ uhci_scan_schedule(uhci, NULL);
+ spin_unlock_irq(&uhci->lock);
- uhci_free_pending_qhs(uhci);
- uhci_free_pending_tds(uhci);
- spin_unlock_irq(&uhci->schedule_lock);
-
- /* Wake up anyone waiting for an URB to complete */
- wake_up_all(&uhci->waitqh);
-
release_uhci(uhci);
}
#ifdef CONFIG_PM
-static int uhci_suspend(struct usb_hcd *hcd, u32 state)
+static int uhci_rh_suspend(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- /* Don't try to suspend broken motherboards, reset instead */
- if (suspend_allowed(uhci)) {
- suspend_hc(uhci);
- uhci->saved_framenumber =
- inw(uhci->io_addr + USBFRNUM) & 0x3ff;
- } else
- reset_hc(uhci);
+ spin_lock_irq(&uhci->lock);
+ if (!uhci->hc_inaccessible) /* Not dead */
+ suspend_rh(uhci, UHCI_RH_SUSPENDED);
+ spin_unlock_irq(&uhci->lock);
return 0;
}
-static int uhci_resume(struct usb_hcd *hcd)
+static int uhci_rh_resume(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int rc = 0;
- pci_set_master(to_pci_dev(uhci_dev(uhci)));
-
- if (uhci->state == UHCI_SUSPENDED) {
-
- /*
- * Some systems don't maintain the UHCI register values
- * during a PM suspend/resume cycle, so reinitialize
- * the Frame Number, the Framelist Base Address, and the
- * Interrupt Enable registers.
- */
- outw(uhci->saved_framenumber, uhci->io_addr + USBFRNUM);
- outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
- outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC |
- USBINTR_SP, uhci->io_addr + USBINTR);
- uhci->resume_detect = 1;
- } else {
- reset_hc(uhci);
- start_hc(uhci);
- }
- uhci->hcd.state = USB_STATE_RUNNING;
- return 0;
+ spin_lock_irq(&uhci->lock);
+ if (uhci->hc_inaccessible) {
+ if (uhci->rh_state == UHCI_RH_SUSPENDED) {
+ dev_warn(uhci_dev(uhci), "HC isn't running!\n");
+ rc = -ENODEV;
+ }
+ /* Otherwise the HC is dead */
+ } else
+ wakeup_rh(uhci);
+ spin_unlock_irq(&uhci->lock);
+ return rc;
}
-#endif
-static struct usb_hcd *uhci_hcd_alloc(void)
+static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
{
- struct uhci_hcd *uhci;
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int rc = 0;
- uhci = (struct uhci_hcd *)kmalloc(sizeof(*uhci), GFP_KERNEL);
- if (!uhci)
- return NULL;
+ dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
- memset(uhci, 0, sizeof(*uhci));
- uhci->hcd.product_desc = "UHCI Host Controller";
- return &uhci->hcd;
-}
+ spin_lock_irq(&uhci->lock);
+ if (uhci->hc_inaccessible) /* Dead or already suspended */
+ goto done;
-static void uhci_hcd_free(struct usb_hcd *hcd)
-{
- kfree(hcd_to_uhci(hcd));
+ if (uhci->rh_state > UHCI_RH_SUSPENDED) {
+ dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
+ rc = -EBUSY;
+ goto done;
+ };
+
+ /* All PCI host controllers are required to disable IRQ generation
+ * at the source, so we must turn off PIRQ.
+ */
+ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
+ mb();
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ uhci->hc_inaccessible = 1;
+ hcd->poll_rh = 0;
+
+ /* FIXME: Enable non-PME# remote wakeup? */
+
+done:
+ spin_unlock_irq(&uhci->lock);
+ return rc;
}
-/* Are there any URBs for a particular device/endpoint on a given list? */
-static int urbs_for_ep_list(struct list_head *head,
- struct hcd_dev *hdev, int ep)
+static int uhci_resume(struct usb_hcd *hcd)
{
- struct urb_priv *urbp;
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+ dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+
+ /* Since we aren't in D3 any more, it's safe to set this flag
+ * even if the controller was dead. It might not even be dead
+ * any more, if the firmware or quirks code has reset it.
+ */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ mb();
+
+ if (uhci->rh_state == UHCI_RH_RESET) /* Dead */
+ return 0;
+ spin_lock_irq(&uhci->lock);
+
+ /* FIXME: Disable non-PME# remote wakeup? */
+
+ uhci->hc_inaccessible = 0;
+
+ /* The BIOS may have changed the controller settings during a
+ * system wakeup. Check it and reconfigure to avoid problems.
+ */
+ check_and_reset_hc(uhci);
+ configure_hc(uhci);
- list_for_each_entry(urbp, head, urb_list) {
- struct urb *urb = urbp->urb;
+ if (uhci->rh_state == UHCI_RH_RESET) {
- if (hdev == urb->dev->hcpriv && ep ==
- (usb_pipeendpoint(urb->pipe) |
- usb_pipein(urb->pipe)))
- return 1;
+ /* The controller had to be reset */
+ usb_root_hub_lost_power(hcd->self.root_hub);
+ suspend_rh(uhci, UHCI_RH_SUSPENDED);
}
- return 0;
-}
-/* Are there any URBs for a particular device/endpoint? */
-static int urbs_for_ep(struct uhci_hcd *uhci, struct hcd_dev *hdev, int ep)
-{
- int rc;
+ spin_unlock_irq(&uhci->lock);
- spin_lock_irq(&uhci->schedule_lock);
- rc = (urbs_for_ep_list(&uhci->urb_list, hdev, ep) ||
- urbs_for_ep_list(&uhci->complete_list, hdev, ep) ||
- urbs_for_ep_list(&uhci->urb_remove_list, hdev, ep));
- spin_unlock_irq(&uhci->schedule_lock);
- return rc;
+ if (!uhci->working_RD) {
+ /* Suspended root hub needs to be polled */
+ hcd->poll_rh = 1;
+ usb_hcd_poll_rh_status(hcd);
+ }
+ return 0;
}
+#endif
/* Wait until all the URBs for a particular device/endpoint are gone */
static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
- struct hcd_dev *hdev, int endpoint)
+ struct usb_host_endpoint *ep)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- wait_event_interruptible(uhci->waitqh,
- !urbs_for_ep(uhci, hdev, endpoint));
+ wait_event_interruptible(uhci->waitqh, list_empty(&ep->urb_list));
}
static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
{
- return uhci_get_current_frame_number(hcd_to_uhci(hcd));
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ unsigned long flags;
+ int is_stopped;
+ int frame_number;
+
+ /* Minimize latency by avoiding the spinlock */
+ local_irq_save(flags);
+ is_stopped = uhci->is_stopped;
+ smp_rmb();
+ frame_number = (is_stopped ? uhci->frame_number :
+ inw(uhci->io_addr + USBFRNUM));
+ local_irq_restore(flags);
+ return frame_number;
}
static const char hcd_name[] = "uhci_hcd";
static const struct hc_driver uhci_driver = {
.description = hcd_name,
+ .product_desc = "UHCI Host Controller",
+ .hcd_priv_size = sizeof(struct uhci_hcd),
/* Generic hardware linkage */
.irq = uhci_irq,
#ifdef CONFIG_PM
.suspend = uhci_suspend,
.resume = uhci_resume,
+ .bus_suspend = uhci_rh_suspend,
+ .bus_resume = uhci_rh_resume,
#endif
.stop = uhci_stop,
- .hcd_alloc = uhci_hcd_alloc,
- .hcd_free = uhci_hcd_free,
-
.urb_enqueue = uhci_urb_enqueue,
.urb_dequeue = uhci_urb_dequeue,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
+ .shutdown = uhci_shutdown,
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
goto errbuf_failed;
}
-#ifdef CONFIG_PROC_FS
- uhci_proc_root = create_proc_entry("driver/uhci", S_IFDIR, 0);
- if (!uhci_proc_root)
- goto proc_failed;
-#endif
+ uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
+ if (!uhci_debugfs_root)
+ goto debug_failed;
uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
sizeof(struct urb_priv), 0, 0, NULL, NULL);
if (!uhci_up_cachep)
goto up_failed;
- retval = pci_module_init(&uhci_pci_driver);
+ retval = pci_register_driver(&uhci_pci_driver);
if (retval)
goto init_failed;
init_failed:
if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_priv's were freed!");
+ warn("not all urb_privs were freed!");
up_failed:
+ debugfs_remove(uhci_debugfs_root);
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("driver/uhci", 0);
-
-proc_failed:
-#endif
- if (errbuf)
- kfree(errbuf);
+debug_failed:
+ kfree(errbuf);
errbuf_failed:
pci_unregister_driver(&uhci_pci_driver);
if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_priv's were freed!");
-
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("driver/uhci", 0);
-#endif
+ warn("not all urb_privs were freed!");
- if (errbuf)
- kfree(errbuf);
+ debugfs_remove(uhci_debugfs_root);
+ kfree(errbuf);
}
module_init(uhci_hcd_init);