* (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
* support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
* (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
- * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
+ * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu
*
* Intel documents this fairly well, and as far as I know there
* are no royalties or anything like that, but even so there are
* people who decided that they want to do the same thing in a
* completely different way.
*
- * WARNING! The USB documentation is downright evil. Most of it
- * is just crap, written by a committee. You're better off ignoring
- * most of it, the important stuff is:
- * - the low-level protocol (fairly simple but lots of small details)
- * - working around the horridness of the rest
*/
-#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#else
-#undef DEBUG
-#endif
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/usb.h>
#include <linux/bitops.h>
+#include <linux/dmi.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include "../core/hcd.h"
#include "uhci-hcd.h"
+#include "pci-quirks.h"
/*
* Version Information
*/
-#define DRIVER_VERSION "v2.2"
+#define DRIVER_VERSION "v3.0"
#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
Alan Stern"
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc;
+module_param(ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
+
/*
* debug = 0, no debugging messages
- * debug = 1, dump failed URB's except for stalls
- * debug = 2, dump all failed URB's (including stalls)
+ * debug = 1, dump failed URBs except for stalls
+ * debug = 2, dump all failed URBs (including stalls)
* show all queues in /debug/uhci/[pci_addr]
- * debug = 3, show all TD's in URB's when dumping
+ * debug = 3, show all TDs in URBs when dumping
*/
#ifdef DEBUG
+#define DEBUG_CONFIGURED 1
static int debug = 1;
-#else
-static int debug = 0;
-#endif
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug level");
-static char *errbuf;
-#define ERRBUF_LEN (32 * 1024)
-
-#include "uhci-hub.c"
-#include "uhci-debug.c"
-
-static kmem_cache_t *uhci_up_cachep; /* urb_priv */
-
-static unsigned int uhci_get_current_frame_number(struct uhci_hcd *uhci);
-static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
-static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb);
-static void uhci_remove_pending_urbps(struct uhci_hcd *uhci);
-static void uhci_finish_completion(struct usb_hcd *hcd, struct pt_regs *regs);
-static void uhci_free_pending_qhs(struct uhci_hcd *uhci);
-static void uhci_free_pending_tds(struct uhci_hcd *uhci);
-
-static void hc_state_transitions(struct uhci_hcd *uhci);
-
-/* If a transfer is still active after this much time, turn off FSBR */
-#define IDLE_TIMEOUT msecs_to_jiffies(50)
-#define FSBR_DELAY msecs_to_jiffies(50)
-
-/* When we timeout an idle transfer for FSBR, we'll switch it over to */
-/* depth first traversal. We'll do it in groups of this number of TD's */
-/* to make sure it doesn't hog all of the bandwidth */
-#define DEPTH_INTERVAL 5
-
-/*
- * Technically, updating td->status here is a race, but it's not really a
- * problem. The worst that can happen is that we set the IOC bit again
- * generating a spurious interrupt. We could fix this by creating another
- * QH and leaving the IOC bit always set, but then we would have to play
- * games with the FSBR code to make sure we get the correct order in all
- * the cases. I don't think it's worth the effort
- */
-static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci)
-{
- uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
-}
-
-static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
-{
- uhci->term_td->status &= ~cpu_to_le32(TD_CTRL_IOC);
-}
-
-static inline void uhci_moveto_complete(struct uhci_hcd *uhci,
- struct urb_priv *urbp)
-{
- list_move_tail(&urbp->urb_list, &uhci->complete_list);
-}
-
-static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci, struct usb_device *dev)
-{
- dma_addr_t dma_handle;
- struct uhci_td *td;
-
- td = dma_pool_alloc(uhci->td_pool, GFP_ATOMIC, &dma_handle);
- if (!td)
- return NULL;
-
- td->dma_handle = dma_handle;
-
- td->link = UHCI_PTR_TERM;
- td->buffer = 0;
-
- td->frame = -1;
- td->dev = dev;
-
- INIT_LIST_HEAD(&td->list);
- INIT_LIST_HEAD(&td->remove_list);
- INIT_LIST_HEAD(&td->fl_list);
-
- usb_get_dev(dev);
-
- return td;
-}
-
-static inline void uhci_fill_td(struct uhci_td *td, u32 status,
- u32 token, u32 buffer)
-{
- td->status = cpu_to_le32(status);
- td->token = cpu_to_le32(token);
- td->buffer = cpu_to_le32(buffer);
-}
-
-/*
- * We insert Isochronous URB's directly into the frame list at the beginning
- */
-static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum)
-{
- framenum &= (UHCI_NUMFRAMES - 1);
-
- td->frame = framenum;
-
- /* Is there a TD already mapped there? */
- if (uhci->fl->frame_cpu[framenum]) {
- struct uhci_td *ftd, *ltd;
-
- ftd = uhci->fl->frame_cpu[framenum];
- ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
-
- list_add_tail(&td->fl_list, &ftd->fl_list);
-
- td->link = ltd->link;
- wmb();
- ltd->link = cpu_to_le32(td->dma_handle);
- } else {
- td->link = uhci->fl->frame[framenum];
- wmb();
- uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle);
- uhci->fl->frame_cpu[framenum] = td;
- }
-}
-
-static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td)
-{
- /* If it's not inserted, don't remove it */
- if (td->frame == -1 && list_empty(&td->fl_list))
- return;
-
- if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) {
- if (list_empty(&td->fl_list)) {
- uhci->fl->frame[td->frame] = td->link;
- uhci->fl->frame_cpu[td->frame] = NULL;
- } else {
- struct uhci_td *ntd;
-
- ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
- uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
- uhci->fl->frame_cpu[td->frame] = ntd;
- }
- } else {
- struct uhci_td *ptd;
-
- ptd = list_entry(td->fl_list.prev, struct uhci_td, fl_list);
- ptd->link = td->link;
- }
-
- wmb();
- td->link = UHCI_PTR_TERM;
-
- list_del_init(&td->fl_list);
- td->frame = -1;
-}
-
-/*
- * Inserts a td list into qh.
- */
-static void uhci_insert_tds_in_qh(struct uhci_qh *qh, struct urb *urb, __le32 breadth)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct uhci_td *td;
- __le32 *plink;
-
- /* Ordering isn't important here yet since the QH hasn't been */
- /* inserted into the schedule yet */
- plink = &qh->element;
- list_for_each_entry(td, &urbp->td_list, list) {
- *plink = cpu_to_le32(td->dma_handle) | breadth;
- plink = &td->link;
- }
- *plink = UHCI_PTR_TERM;
-}
-
-static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td)
-{
- if (!list_empty(&td->list))
- dev_warn(uhci_dev(uhci), "td %p still in list!\n", td);
- if (!list_empty(&td->remove_list))
- dev_warn(uhci_dev(uhci), "td %p still in remove_list!\n", td);
- if (!list_empty(&td->fl_list))
- dev_warn(uhci_dev(uhci), "td %p still in fl_list!\n", td);
-
- if (td->dev)
- usb_put_dev(td->dev);
-
- dma_pool_free(uhci->td_pool, td, td->dma_handle);
-}
-
-static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci, struct usb_device *dev)
-{
- dma_addr_t dma_handle;
- struct uhci_qh *qh;
-
- qh = dma_pool_alloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
- if (!qh)
- return NULL;
-
- qh->dma_handle = dma_handle;
-
- qh->element = UHCI_PTR_TERM;
- qh->link = UHCI_PTR_TERM;
-
- qh->dev = dev;
- qh->urbp = NULL;
-
- INIT_LIST_HEAD(&qh->list);
- INIT_LIST_HEAD(&qh->remove_list);
-
- usb_get_dev(dev);
-
- return qh;
-}
-
-static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
-{
- if (!list_empty(&qh->list))
- dev_warn(uhci_dev(uhci), "qh %p list not empty!\n", qh);
- if (!list_empty(&qh->remove_list))
- dev_warn(uhci_dev(uhci), "qh %p still in remove_list!\n", qh);
-
- if (qh->dev)
- usb_put_dev(qh->dev);
-
- dma_pool_free(uhci->qh_pool, qh, qh->dma_handle);
-}
-
-/*
- * Append this urb's qh after the last qh in skelqh->list
- *
- * Note that urb_priv.queue_list doesn't have a separate queue head;
- * it's a ring with every element "live".
- */
-static void uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct urb_priv *turbp;
- struct uhci_qh *lqh;
-
- /* Grab the last QH */
- lqh = list_entry(skelqh->list.prev, struct uhci_qh, list);
-
- /* Point to the next skelqh */
- urbp->qh->link = lqh->link;
- wmb(); /* Ordering is important */
-
- /*
- * Patch QHs for previous endpoint's queued URBs? HC goes
- * here next, not to the next skelqh it now points to.
- *
- * lqh --> td ... --> qh ... --> td --> qh ... --> td
- * | | |
- * v v v
- * +<----------------+-----------------+
- * v
- * newqh --> td ... --> td
- * |
- * v
- * ...
- *
- * The HC could see (and use!) any of these as we write them.
- */
- lqh->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
- if (lqh->urbp) {
- list_for_each_entry(turbp, &lqh->urbp->queue_list, queue_list)
- turbp->qh->link = lqh->link;
- }
-
- list_add_tail(&urbp->qh->list, &skelqh->list);
-}
-
-/*
- * Start removal of QH from schedule; it finishes next frame.
- * TDs should be unlinked before this is called.
- */
-static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
-{
- struct uhci_qh *pqh;
- __le32 newlink;
- unsigned int age;
-
- if (!qh)
- return;
-
- /*
- * Only go through the hoops if it's actually linked in
- */
- if (!list_empty(&qh->list)) {
-
- /* If our queue is nonempty, make the next URB the head */
- if (!list_empty(&qh->urbp->queue_list)) {
- struct urb_priv *nurbp;
-
- nurbp = list_entry(qh->urbp->queue_list.next,
- struct urb_priv, queue_list);
- nurbp->queued = 0;
- list_add(&nurbp->qh->list, &qh->list);
- newlink = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
- } else
- newlink = qh->link;
-
- /* Fix up the previous QH's queue to link to either
- * the new head of this queue or the start of the
- * next endpoint's queue. */
- pqh = list_entry(qh->list.prev, struct uhci_qh, list);
- pqh->link = newlink;
- if (pqh->urbp) {
- struct urb_priv *turbp;
-
- list_for_each_entry(turbp, &pqh->urbp->queue_list,
- queue_list)
- turbp->qh->link = newlink;
- }
- wmb();
-
- /* Leave qh->link in case the HC is on the QH now, it will */
- /* continue the rest of the schedule */
- qh->element = UHCI_PTR_TERM;
-
- list_del_init(&qh->list);
- }
-
- list_del_init(&qh->urbp->queue_list);
- qh->urbp = NULL;
-
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->qh_remove_age) {
- uhci_free_pending_qhs(uhci);
- uhci->qh_remove_age = age;
- }
-
- /* Check to see if the remove list is empty. Set the IOC bit */
- /* to force an interrupt so we can remove the QH */
- if (list_empty(&uhci->qh_remove_list))
- uhci_set_next_interrupt(uhci);
-
- list_add(&qh->remove_list, &uhci->qh_remove_list);
-}
-
-static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct uhci_td *td;
-
- list_for_each_entry(td, &urbp->td_list, list) {
- if (toggle)
- td->token |= cpu_to_le32(TD_TOKEN_TOGGLE);
- else
- td->token &= ~cpu_to_le32(TD_TOKEN_TOGGLE);
-
- toggle ^= 1;
- }
-
- return toggle;
-}
-
-/* This function will append one URB's QH to another URB's QH. This is for */
-/* queuing interrupt, control or bulk transfers */
-static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, struct urb *urb)
-{
- struct urb_priv *eurbp, *urbp, *furbp, *lurbp;
- struct uhci_td *lltd;
-
- eurbp = eurb->hcpriv;
- urbp = urb->hcpriv;
-
- /* Find the first URB in the queue */
- furbp = eurbp;
- if (eurbp->queued) {
- list_for_each_entry(furbp, &eurbp->queue_list, queue_list)
- if (!furbp->queued)
- break;
- }
-
- lurbp = list_entry(furbp->queue_list.prev, struct urb_priv, queue_list);
-
- lltd = list_entry(lurbp->td_list.prev, struct uhci_td, list);
-
- /* Control transfers always start with toggle 0 */
- if (!usb_pipecontrol(urb->pipe))
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe),
- uhci_fixup_toggle(urb,
- uhci_toggle(td_token(lltd)) ^ 1));
-
- /* All qh's in the queue need to link to the next queue */
- urbp->qh->link = eurbp->qh->link;
-
- wmb(); /* Make sure we flush everything */
-
- lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
-
- list_add_tail(&urbp->queue_list, &furbp->queue_list);
-
- urbp->queued = 1;
-}
-
-static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp, *nurbp, *purbp, *turbp;
- struct uhci_td *pltd;
- unsigned int toggle;
-
- urbp = urb->hcpriv;
-
- if (list_empty(&urbp->queue_list))
- return;
-
- nurbp = list_entry(urbp->queue_list.next, struct urb_priv, queue_list);
-
- /*
- * Fix up the toggle for the following URBs in the queue.
- * Only needed for bulk and interrupt: control and isochronous
- * endpoints don't propagate toggles between messages.
- */
- if (usb_pipebulk(urb->pipe) || usb_pipeint(urb->pipe)) {
- if (!urbp->queued)
- /* We just set the toggle in uhci_unlink_generic */
- toggle = usb_gettoggle(urb->dev,
- usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe));
- else {
- /* If we're in the middle of the queue, grab the */
- /* toggle from the TD previous to us */
- purbp = list_entry(urbp->queue_list.prev,
- struct urb_priv, queue_list);
- pltd = list_entry(purbp->td_list.prev,
- struct uhci_td, list);
- toggle = uhci_toggle(td_token(pltd)) ^ 1;
- }
-
- list_for_each_entry(turbp, &urbp->queue_list, queue_list) {
- if (!turbp->queued)
- break;
- toggle = uhci_fixup_toggle(turbp->urb, toggle);
- }
-
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), toggle);
- }
-
- if (urbp->queued) {
- /* We're somewhere in the middle (or end). The case where
- * we're at the head is handled in uhci_remove_qh(). */
- purbp = list_entry(urbp->queue_list.prev, struct urb_priv,
- queue_list);
-
- pltd = list_entry(purbp->td_list.prev, struct uhci_td, list);
- if (nurbp->queued)
- pltd->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
- else
- /* The next URB happens to be the beginning, so */
- /* we're the last, end the chain */
- pltd->link = UHCI_PTR_TERM;
- }
-
- /* urbp->queue_list is handled in uhci_remove_qh() */
-}
-
-static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp;
-
- urbp = kmem_cache_alloc(uhci_up_cachep, SLAB_ATOMIC);
- if (!urbp)
- return NULL;
-
- memset((void *)urbp, 0, sizeof(*urbp));
-
- urbp->inserttime = jiffies;
- urbp->fsbrtime = jiffies;
- urbp->urb = urb;
-
- INIT_LIST_HEAD(&urbp->td_list);
- INIT_LIST_HEAD(&urbp->queue_list);
- INIT_LIST_HEAD(&urbp->urb_list);
-
- list_add_tail(&urbp->urb_list, &uhci->urb_list);
-
- urb->hcpriv = urbp;
-
- return urbp;
-}
-
-static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-
- td->urb = urb;
-
- list_add_tail(&td->list, &urbp->td_list);
-}
-
-static void uhci_remove_td_from_urb(struct uhci_td *td)
-{
- if (list_empty(&td->list))
- return;
-
- list_del_init(&td->list);
-
- td->urb = NULL;
-}
-
-static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct uhci_td *td, *tmp;
- struct urb_priv *urbp;
- unsigned int age;
-
- urbp = (struct urb_priv *)urb->hcpriv;
- if (!urbp)
- return;
-
- if (!list_empty(&urbp->urb_list))
- dev_warn(uhci_dev(uhci), "urb %p still on uhci->urb_list "
- "or uhci->remove_list!\n", urb);
-
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->td_remove_age) {
- uhci_free_pending_tds(uhci);
- uhci->td_remove_age = age;
- }
-
- /* Check to see if the remove list is empty. Set the IOC bit */
- /* to force an interrupt so we can remove the TD's*/
- if (list_empty(&uhci->td_remove_list))
- uhci_set_next_interrupt(uhci);
-
- list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
- uhci_remove_td_from_urb(td);
- uhci_remove_td(uhci, td);
- list_add(&td->remove_list, &uhci->td_remove_list);
- }
-
- urb->hcpriv = NULL;
- kmem_cache_free(uhci_up_cachep, urbp);
-}
-
-static void uhci_inc_fsbr(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-
- if ((!(urb->transfer_flags & URB_NO_FSBR)) && !urbp->fsbr) {
- urbp->fsbr = 1;
- if (!uhci->fsbr++ && !uhci->fsbrtimeout)
- uhci->skel_term_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
- }
-}
-
-static void uhci_dec_fsbr(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-
- if ((!(urb->transfer_flags & URB_NO_FSBR)) && urbp->fsbr) {
- urbp->fsbr = 0;
- if (!--uhci->fsbr)
- uhci->fsbrtimeout = jiffies + FSBR_DELAY;
- }
-}
-
-/*
- * Map status to standard result codes
- *
- * <status> is (td_status(td) & 0xF60000), a.k.a.
- * uhci_status_bits(td_status(td)).
- * Note: <status> does not include the TD_CTRL_NAK bit.
- * <dir_out> is True for output TDs and False for input TDs.
- */
-static int uhci_map_status(int status, int dir_out)
-{
- if (!status)
- return 0;
- if (status & TD_CTRL_BITSTUFF) /* Bitstuff error */
- return -EPROTO;
- if (status & TD_CTRL_CRCTIMEO) { /* CRC/Timeout */
- if (dir_out)
- return -EPROTO;
- else
- return -EILSEQ;
- }
- if (status & TD_CTRL_BABBLE) /* Babble */
- return -EOVERFLOW;
- if (status & TD_CTRL_DBUFERR) /* Buffer error */
- return -ENOSR;
- if (status & TD_CTRL_STALLED) /* Stalled */
- return -EPIPE;
- WARN_ON(status & TD_CTRL_ACTIVE); /* Active */
- return 0;
-}
-
-/*
- * Control transfers
- */
-static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct uhci_td *td;
- struct uhci_qh *qh, *skelqh;
- unsigned long destination, status;
- int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- int len = urb->transfer_buffer_length;
- dma_addr_t data = urb->transfer_dma;
-
- /* The "pipe" thing contains the destination in bits 8--18 */
- destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP;
-
- /* 3 errors */
- status = TD_CTRL_ACTIVE | uhci_maxerr(3);
- if (urb->dev->speed == USB_SPEED_LOW)
- status |= TD_CTRL_LS;
-
- /*
- * Build the TD for the control request setup packet
- */
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(7),
- urb->setup_dma);
-
- /*
- * If direction is "send", change the packet ID from SETUP (0x2D)
- * to OUT (0xE1). Else change it from SETUP to IN (0x69) and
- * set Short Packet Detect (SPD) for all data packets.
- */
- if (usb_pipeout(urb->pipe))
- destination ^= (USB_PID_SETUP ^ USB_PID_OUT);
- else {
- destination ^= (USB_PID_SETUP ^ USB_PID_IN);
- status |= TD_CTRL_SPD;
- }
-
- /*
- * Build the DATA TD's
- */
- while (len > 0) {
- int pktsze = len;
-
- if (pktsze > maxsze)
- pktsze = maxsze;
-
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- /* Alternate Data0/1 (start with Data1) */
- destination ^= TD_TOKEN_TOGGLE;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1),
- data);
-
- data += pktsze;
- len -= pktsze;
- }
-
- /*
- * Build the final TD for control status
- */
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- /*
- * It's IN if the pipe is an output pipe or we're not expecting
- * data back.
- */
- destination &= ~TD_TOKEN_PID_MASK;
- if (usb_pipeout(urb->pipe) || !urb->transfer_buffer_length)
- destination |= USB_PID_IN;
- else
- destination |= USB_PID_OUT;
- destination |= TD_TOKEN_TOGGLE; /* End in Data1 */
-
- status &= ~TD_CTRL_SPD;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status | TD_CTRL_IOC,
- destination | uhci_explen(UHCI_NULL_DATA_SIZE), 0);
-
- qh = uhci_alloc_qh(uhci, urb->dev);
- if (!qh)
- return -ENOMEM;
-
- urbp->qh = qh;
- qh->urbp = urbp;
-
- uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
-
- /* Low-speed transfers get a different queue, and won't hog the bus.
- * Also, some devices enumerate better without FSBR; the easiest way
- * to do that is to put URBs on the low-speed queue while the device
- * is in the DEFAULT state. */
- if (urb->dev->speed == USB_SPEED_LOW ||
- urb->dev->state == USB_STATE_DEFAULT)
- skelqh = uhci->skel_ls_control_qh;
- else {
- skelqh = uhci->skel_fs_control_qh;
- uhci_inc_fsbr(uhci, urb);
- }
-
- if (eurb)
- uhci_append_queued_urb(uhci, eurb, urb);
- else
- uhci_insert_qh(uhci, skelqh, urb);
-
- return -EINPROGRESS;
-}
-
-/*
- * If control-IN transfer was short, the status packet wasn't sent.
- * This routine changes the element pointer in the QH to point at the
- * status TD. It's safe to do this even while the QH is live, because
- * the hardware only updates the element pointer following a successful
- * transfer. The inactive TD for the short packet won't cause an update,
- * so the pointer won't get overwritten. The next time the controller
- * sees this QH, it will send the status packet.
- */
-static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct uhci_td *td;
-
- urbp->short_control_packet = 1;
-
- td = list_entry(urbp->td_list.prev, struct uhci_td, list);
- urbp->qh->element = cpu_to_le32(td->dma_handle);
-
- return -EINPROGRESS;
-}
-
-
-static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct list_head *tmp, *head;
- struct urb_priv *urbp = urb->hcpriv;
- struct uhci_td *td;
- unsigned int status;
- int ret = 0;
-
- if (list_empty(&urbp->td_list))
- return -EINVAL;
-
- head = &urbp->td_list;
-
- if (urbp->short_control_packet) {
- tmp = head->prev;
- goto status_stage;
- }
-
- tmp = head->next;
- td = list_entry(tmp, struct uhci_td, list);
-
- /* The first TD is the SETUP stage, check the status, but skip */
- /* the count */
- status = uhci_status_bits(td_status(td));
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- if (status)
- goto td_error;
-
- urb->actual_length = 0;
-
- /* The rest of the TD's (but the last) are data */
- tmp = tmp->next;
- while (tmp != head && tmp->next != head) {
- unsigned int ctrlstat;
-
- td = list_entry(tmp, struct uhci_td, list);
- tmp = tmp->next;
-
- ctrlstat = td_status(td);
- status = uhci_status_bits(ctrlstat);
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- urb->actual_length += uhci_actual_length(ctrlstat);
-
- if (status)
- goto td_error;
-
- /* Check to see if we received a short packet */
- if (uhci_actual_length(ctrlstat) <
- uhci_expected_length(td_token(td))) {
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- ret = -EREMOTEIO;
- goto err;
- }
-
- if (uhci_packetid(td_token(td)) == USB_PID_IN)
- return usb_control_retrigger_status(uhci, urb);
- else
- return 0;
- }
- }
-
-status_stage:
- td = list_entry(tmp, struct uhci_td, list);
-
- /* Control status stage */
- status = td_status(td);
-
-#ifdef I_HAVE_BUGGY_APC_BACKUPS
- /* APC BackUPS Pro kludge */
- /* It tries to send all of the descriptor instead of the amount */
- /* we requested */
- if (status & TD_CTRL_IOC && /* IOC is masked out by uhci_status_bits */
- status & TD_CTRL_ACTIVE &&
- status & TD_CTRL_NAK)
- return 0;
-#endif
-
- status = uhci_status_bits(status);
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- if (status)
- goto td_error;
-
- return 0;
-
-td_error:
- ret = uhci_map_status(status, uhci_packetout(td_token(td)));
-
-err:
- if ((debug == 1 && ret != -EPIPE) || debug > 1) {
- /* Some debugging code */
- dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n",
- __FUNCTION__, status);
-
- if (errbuf) {
- /* Print the chain for debugging purposes */
- uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
-
- lprintk(errbuf);
- }
- }
-
- return ret;
-}
-
-/*
- * Common submit for bulk and interrupt
- */
-static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb, struct uhci_qh *skelqh)
-{
- struct uhci_td *td;
- struct uhci_qh *qh;
- unsigned long destination, status;
- int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- int len = urb->transfer_buffer_length;
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- dma_addr_t data = urb->transfer_dma;
-
- if (len < 0)
- return -EINVAL;
-
- /* The "pipe" thing contains the destination in bits 8--18 */
- destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
-
- status = uhci_maxerr(3) | TD_CTRL_ACTIVE;
- if (urb->dev->speed == USB_SPEED_LOW)
- status |= TD_CTRL_LS;
- if (usb_pipein(urb->pipe))
- status |= TD_CTRL_SPD;
-
- /*
- * Build the DATA TD's
- */
- do { /* Allow zero length packets */
- int pktsze = maxsze;
-
- if (pktsze >= len) {
- pktsze = len;
- if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
- status &= ~TD_CTRL_SPD;
- }
-
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) |
- (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
- data);
-
- data += pktsze;
- len -= maxsze;
-
- usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe));
- } while (len > 0);
-
- /*
- * URB_ZERO_PACKET means adding a 0-length packet, if direction
- * is OUT and the transfer_length was an exact multiple of maxsze,
- * hence (len = transfer_length - N * maxsze) == 0
- * however, if transfer_length == 0, the zero packet was already
- * prepared above.
- */
- if (usb_pipeout(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) &&
- !len && urb->transfer_buffer_length) {
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) |
- (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
- data);
-
- usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe));
- }
-
- /* Set the interrupt-on-completion flag on the last packet.
- * A more-or-less typical 4 KB URB (= size of one memory page)
- * will require about 3 ms to transfer; that's a little on the
- * fast side but not enough to justify delaying an interrupt
- * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
- * flag setting. */
- td->status |= cpu_to_le32(TD_CTRL_IOC);
-
- qh = uhci_alloc_qh(uhci, urb->dev);
- if (!qh)
- return -ENOMEM;
-
- urbp->qh = qh;
- qh->urbp = urbp;
-
- /* Always breadth first */
- uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
-
- if (eurb)
- uhci_append_queued_urb(uhci, eurb, urb);
- else
- uhci_insert_qh(uhci, skelqh, urb);
-
- return -EINPROGRESS;
-}
-
-/*
- * Common result for bulk and interrupt
- */
-static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = urb->hcpriv;
- struct uhci_td *td;
- unsigned int status = 0;
- int ret = 0;
-
- urb->actual_length = 0;
-
- list_for_each_entry(td, &urbp->td_list, list) {
- unsigned int ctrlstat = td_status(td);
-
- status = uhci_status_bits(ctrlstat);
- if (status & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- urb->actual_length += uhci_actual_length(ctrlstat);
-
- if (status)
- goto td_error;
-
- if (uhci_actual_length(ctrlstat) <
- uhci_expected_length(td_token(td))) {
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- ret = -EREMOTEIO;
- goto err;
- } else
- return 0;
- }
- }
-
- return 0;
-
-td_error:
- ret = uhci_map_status(status, uhci_packetout(td_token(td)));
-
-err:
- /*
- * Enable this chunk of code if you want to see some more debugging.
- * But be careful, it has the tendancy to starve out khubd and prevent
- * disconnects from happening successfully if you have a slow debug
- * log interface (like a serial console.
- */
-#if 0
- if ((debug == 1 && ret != -EPIPE) || debug > 1) {
- /* Some debugging code */
- dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n",
- __FUNCTION__, status);
-
- if (errbuf) {
- /* Print the chain for debugging purposes */
- uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
-
- lprintk(errbuf);
- }
- }
+#else
+#define DEBUG_CONFIGURED 0
+#define debug 0
#endif
- return ret;
-}
-
-static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
-{
- int ret;
-
- /* Can't have low-speed bulk transfers */
- if (urb->dev->speed == USB_SPEED_LOW)
- return -EINVAL;
-
- ret = uhci_submit_common(uhci, urb, eurb, uhci->skel_bulk_qh);
- if (ret == -EINPROGRESS)
- uhci_inc_fsbr(uhci, urb);
-
- return ret;
-}
-
-static inline int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
-{
- /* USB 1.1 interrupt transfers only involve one packet per interval;
- * that's the uhci_submit_common() "breadth first" policy. Drivers
- * can submit urbs of any length, but longer ones might need many
- * intervals to complete.
- */
- return uhci_submit_common(uhci, urb, eurb, uhci->skelqh[__interval_to_skel(urb->interval)]);
-}
-
-/*
- * Isochronous transfers
- */
-static int isochronous_find_limits(struct uhci_hcd *uhci, struct urb *urb, unsigned int *start, unsigned int *end)
-{
- struct urb *last_urb = NULL;
- struct urb_priv *up;
- int ret = 0;
-
- list_for_each_entry(up, &uhci->urb_list, urb_list) {
- struct urb *u = up->urb;
-
- /* look for pending URB's with identical pipe handle */
- if ((urb->pipe == u->pipe) && (urb->dev == u->dev) &&
- (u->status == -EINPROGRESS) && (u != urb)) {
- if (!last_urb)
- *start = u->start_frame;
- last_urb = u;
- }
- }
-
- if (last_urb) {
- *end = (last_urb->start_frame + last_urb->number_of_packets *
- last_urb->interval) & (UHCI_NUMFRAMES-1);
- ret = 0;
- } else
- ret = -1; /* no previous urb found */
-
- return ret;
-}
-
-static int isochronous_find_start(struct uhci_hcd *uhci, struct urb *urb)
-{
- int limits;
- unsigned int start = 0, end = 0;
-
- if (urb->number_of_packets > 900) /* 900? Why? */
- return -EFBIG;
-
- limits = isochronous_find_limits(uhci, urb, &start, &end);
-
- if (urb->transfer_flags & URB_ISO_ASAP) {
- if (limits)
- urb->start_frame =
- (uhci_get_current_frame_number(uhci) +
- 10) & (UHCI_NUMFRAMES - 1);
- else
- urb->start_frame = end;
- } else {
- urb->start_frame &= (UHCI_NUMFRAMES - 1);
- /* FIXME: Sanity check */
- }
-
- return 0;
-}
-
-/*
- * Isochronous transfers
- */
-static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct uhci_td *td;
- int i, ret, frame;
- int status, destination;
-
- status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
- destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
-
- ret = isochronous_find_start(uhci, urb);
- if (ret)
- return ret;
-
- frame = urb->start_frame;
- for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) {
- if (!urb->iso_frame_desc[i].length)
- continue;
-
- td = uhci_alloc_td(uhci, urb->dev);
- if (!td)
- return -ENOMEM;
-
- uhci_add_td_to_urb(urb, td);
- uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length - 1),
- urb->transfer_dma + urb->iso_frame_desc[i].offset);
- if (i + 1 >= urb->number_of_packets)
- td->status |= cpu_to_le32(TD_CTRL_IOC);
-
- uhci_insert_td_frame_list(uhci, td, frame);
- }
-
- return -EINPROGRESS;
-}
-
-static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct uhci_td *td;
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- int status;
- int i, ret = 0;
-
- urb->actual_length = 0;
-
- i = 0;
- list_for_each_entry(td, &urbp->td_list, list) {
- int actlength;
- unsigned int ctrlstat = td_status(td);
-
- if (ctrlstat & TD_CTRL_ACTIVE)
- return -EINPROGRESS;
-
- actlength = uhci_actual_length(ctrlstat);
- urb->iso_frame_desc[i].actual_length = actlength;
- urb->actual_length += actlength;
-
- status = uhci_map_status(uhci_status_bits(ctrlstat),
- usb_pipeout(urb->pipe));
- urb->iso_frame_desc[i].status = status;
- if (status) {
- urb->error_count++;
- ret = status;
- }
-
- i++;
- }
-
- return ret;
-}
-
-static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *up;
-
- /* We don't match Isoc transfers since they are special */
- if (usb_pipeisoc(urb->pipe))
- return NULL;
-
- list_for_each_entry(up, &uhci->urb_list, urb_list) {
- struct urb *u = up->urb;
-
- if (u->dev == urb->dev && u->status == -EINPROGRESS) {
- /* For control, ignore the direction */
- if (usb_pipecontrol(urb->pipe) &&
- (u->pipe & ~USB_DIR_IN) == (urb->pipe & ~USB_DIR_IN))
- return u;
- else if (u->pipe == urb->pipe)
- return u;
- }
- }
-
- return NULL;
-}
-
-static int uhci_urb_enqueue(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep,
- struct urb *urb, int mem_flags)
-{
- int ret;
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- unsigned long flags;
- struct urb *eurb;
- int bustime;
-
- spin_lock_irqsave(&uhci->schedule_lock, flags);
-
- ret = urb->status;
- if (ret != -EINPROGRESS) /* URB already unlinked! */
- goto out;
-
- eurb = uhci_find_urb_ep(uhci, urb);
-
- if (!uhci_alloc_urb_priv(uhci, urb)) {
- ret = -ENOMEM;
- goto out;
- }
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- ret = uhci_submit_control(uhci, urb, eurb);
- break;
- case PIPE_INTERRUPT:
- if (!eurb) {
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0)
- ret = bustime;
- else {
- ret = uhci_submit_interrupt(uhci, urb, eurb);
- if (ret == -EINPROGRESS)
- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
- }
- } else { /* inherit from parent */
- urb->bandwidth = eurb->bandwidth;
- ret = uhci_submit_interrupt(uhci, urb, eurb);
- }
- break;
- case PIPE_BULK:
- ret = uhci_submit_bulk(uhci, urb, eurb);
- break;
- case PIPE_ISOCHRONOUS:
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0) {
- ret = bustime;
- break;
- }
-
- ret = uhci_submit_isochronous(uhci, urb);
- if (ret == -EINPROGRESS)
- usb_claim_bandwidth(urb->dev, urb, bustime, 1);
- break;
- }
+static char *errbuf;
+#define ERRBUF_LEN (32 * 1024)
- if (ret != -EINPROGRESS) {
- /* Submit failed, so delete it from the urb_list */
- struct urb_priv *urbp = urb->hcpriv;
+static struct kmem_cache *uhci_up_cachep; /* urb_priv */
- list_del_init(&urbp->urb_list);
- uhci_destroy_urb_priv(uhci, urb);
- } else
- ret = 0;
+static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
+static void wakeup_rh(struct uhci_hcd *uhci);
+static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
-out:
- spin_unlock_irqrestore(&uhci->schedule_lock, flags);
- return ret;
-}
+#include "uhci-debug.c"
+#include "uhci-q.c"
+#include "uhci-hub.c"
/*
- * Return the result of a transfer
+ * Finish up a host controller reset and update the recorded state.
*/
-static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb)
-{
- int ret = -EINPROGRESS;
- struct urb_priv *urbp;
-
- spin_lock(&urb->lock);
-
- urbp = (struct urb_priv *)urb->hcpriv;
-
- if (urb->status != -EINPROGRESS) /* URB already dequeued */
- goto out;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- ret = uhci_result_control(uhci, urb);
- break;
- case PIPE_BULK:
- case PIPE_INTERRUPT:
- ret = uhci_result_common(uhci, urb);
- break;
- case PIPE_ISOCHRONOUS:
- ret = uhci_result_isochronous(uhci, urb);
- break;
- }
-
- if (ret == -EINPROGRESS)
- goto out;
- urb->status = ret;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- case PIPE_ISOCHRONOUS:
- /* Release bandwidth for Interrupt or Isoc. transfers */
- if (urb->bandwidth)
- usb_release_bandwidth(urb->dev, urb, 1);
- uhci_unlink_generic(uhci, urb);
- break;
- case PIPE_INTERRUPT:
- /* Release bandwidth for Interrupt or Isoc. transfers */
- /* Make sure we don't release if we have a queued URB */
- if (list_empty(&urbp->queue_list) && urb->bandwidth)
- usb_release_bandwidth(urb->dev, urb, 0);
- else
- /* bandwidth was passed on to queued URB, */
- /* so don't let usb_unlink_urb() release it */
- urb->bandwidth = 0;
- uhci_unlink_generic(uhci, urb);
- break;
- default:
- dev_info(uhci_dev(uhci), "%s: unknown pipe type %d "
- "for urb %p\n",
- __FUNCTION__, usb_pipetype(urb->pipe), urb);
- }
-
- /* Move it from uhci->urb_list to uhci->complete_list */
- uhci_moveto_complete(uhci, urbp);
-
-out:
- spin_unlock(&urb->lock);
-}
-
-static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb)
+static void finish_reset(struct uhci_hcd *uhci)
{
- struct list_head *head;
- struct uhci_td *td;
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- int prevactive = 0;
+ int port;
- uhci_dec_fsbr(uhci, urb); /* Safe since it checks */
-
- /*
- * Now we need to find out what the last successful toggle was
- * so we can update the local data toggle for the next transfer
- *
- * There are 2 ways the last successful completed TD is found:
- *
- * 1) The TD is NOT active and the actual length < expected length
- * 2) The TD is NOT active and it's the last TD in the chain
- *
- * and a third way the first uncompleted TD is found:
- *
- * 3) The TD is active and the previous TD is NOT active
- *
- * Control and Isochronous ignore the toggle, so this is safe
- * for all types
- *
- * FIXME: The toggle fixups won't be 100% reliable until we
- * change over to using a single queue for each endpoint and
- * stop the queue before unlinking.
+ /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
+ * bits in the port status and control registers.
+ * We have to clear them by hand.
*/
- head = &urbp->td_list;
- list_for_each_entry(td, head, list) {
- unsigned int ctrlstat = td_status(td);
-
- if (!(ctrlstat & TD_CTRL_ACTIVE) &&
- (uhci_actual_length(ctrlstat) <
- uhci_expected_length(td_token(td)) ||
- td->list.next == head))
- usb_settoggle(urb->dev, uhci_endpoint(td_token(td)),
- uhci_packetout(td_token(td)),
- uhci_toggle(td_token(td)) ^ 1);
- else if ((ctrlstat & TD_CTRL_ACTIVE) && !prevactive)
- usb_settoggle(urb->dev, uhci_endpoint(td_token(td)),
- uhci_packetout(td_token(td)),
- uhci_toggle(td_token(td)));
-
- prevactive = ctrlstat & TD_CTRL_ACTIVE;
- }
-
- uhci_delete_queued_urb(uhci, urb);
-
- /* The interrupt loop will reclaim the QH's */
- uhci_remove_qh(uhci, urbp->qh);
- urbp->qh = NULL;
-}
-
-static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
-{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- unsigned long flags;
- struct urb_priv *urbp;
- unsigned int age;
-
- spin_lock_irqsave(&uhci->schedule_lock, flags);
- urbp = urb->hcpriv;
- if (!urbp) /* URB was never linked! */
- goto done;
- list_del_init(&urbp->urb_list);
-
- uhci_unlink_generic(uhci, urb);
-
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->urb_remove_age) {
- uhci_remove_pending_urbps(uhci);
- uhci->urb_remove_age = age;
- }
-
- /* If we're the first, set the next interrupt bit */
- if (list_empty(&uhci->urb_remove_list))
- uhci_set_next_interrupt(uhci);
- list_add_tail(&urbp->urb_list, &uhci->urb_remove_list);
-
-done:
- spin_unlock_irqrestore(&uhci->schedule_lock, flags);
- return 0;
-}
-
-static int uhci_fsbr_timeout(struct uhci_hcd *uhci, struct urb *urb)
-{
- struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- struct list_head *head;
- struct uhci_td *td;
- int count = 0;
-
- uhci_dec_fsbr(uhci, urb);
-
- urbp->fsbr_timeout = 1;
-
- /*
- * Ideally we would want to fix qh->element as well, but it's
- * read/write by the HC, so that can introduce a race. It's not
- * really worth the hassle
- */
-
- head = &urbp->td_list;
- list_for_each_entry(td, head, list) {
- /*
- * Make sure we don't do the last one (since it'll have the
- * TERM bit set) as well as we skip every so many TD's to
- * make sure it doesn't hog the bandwidth
- */
- if (td->list.next != head && (count % DEPTH_INTERVAL) ==
- (DEPTH_INTERVAL - 1))
- td->link |= UHCI_PTR_DEPTH;
+ for (port = 0; port < uhci->rh_numports; ++port)
+ outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
- count++;
- }
+ uhci->port_c_suspend = uhci->resuming_ports = 0;
+ uhci->rh_state = UHCI_RH_RESET;
+ uhci->is_stopped = UHCI_IS_STOPPED;
+ uhci_to_hcd(uhci)->state = HC_STATE_HALT;
+ uhci_to_hcd(uhci)->poll_rh = 0;
- return 0;
+ uhci->dead = 0; /* Full reset resurrects the controller */
}
/*
- * uhci_get_current_frame_number()
- *
- * returns the current frame number for a USB bus/controller.
+ * Last rites for a defunct/nonfunctional controller
+ * or one we don't want to use any more.
*/
-static unsigned int uhci_get_current_frame_number(struct uhci_hcd *uhci)
+static void uhci_hc_died(struct uhci_hcd *uhci)
{
- return inw(uhci->io_addr + USBFRNUM);
+ uhci_get_current_frame_number(uhci);
+ uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+ finish_reset(uhci);
+ uhci->dead = 1;
+
+ /* The current frame may already be partway finished */
+ ++uhci->frame_number;
}
-static int init_stall_timer(struct usb_hcd *hcd);
+/*
+ * Initialize a controller that was newly discovered or has lost power
+ * or otherwise been reset while it was suspended. In none of these cases
+ * can we be sure of its previous state.
+ */
+static void check_and_reset_hc(struct uhci_hcd *uhci)
+{
+ if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
+ finish_reset(uhci);
+}
-static void stall_callback(unsigned long ptr)
+/*
+ * Store the basic register settings needed by the controller.
+ */
+static void configure_hc(struct uhci_hcd *uhci)
{
- struct usb_hcd *hcd = (struct usb_hcd *)ptr;
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- struct urb_priv *up;
- unsigned long flags;
- int called_uhci_finish_completion = 0;
-
- spin_lock_irqsave(&uhci->schedule_lock, flags);
- if (!list_empty(&uhci->urb_remove_list) &&
- uhci_get_current_frame_number(uhci) != uhci->urb_remove_age) {
- uhci_remove_pending_urbps(uhci);
- uhci_finish_completion(hcd, NULL);
- called_uhci_finish_completion = 1;
- }
+ /* Set the frame length to the default: 1 ms exactly */
+ outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
- list_for_each_entry(up, &uhci->urb_list, urb_list) {
- struct urb *u = up->urb;
+ /* Store the frame list base address */
+ outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
- spin_lock(&u->lock);
+ /* Set the current frame number */
+ outw(uhci->frame_number & UHCI_MAX_SOF_NUMBER,
+ uhci->io_addr + USBFRNUM);
- /* Check if the FSBR timed out */
- if (up->fsbr && !up->fsbr_timeout && time_after_eq(jiffies, up->fsbrtime + IDLE_TIMEOUT))
- uhci_fsbr_timeout(uhci, u);
+ /* Mark controller as not halted before we enable interrupts */
+ uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
+ mb();
- spin_unlock(&u->lock);
- }
- spin_unlock_irqrestore(&uhci->schedule_lock, flags);
+ /* Enable PIRQ */
+ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
+ USBLEGSUP_DEFAULT);
+}
- /* Wake up anyone waiting for an URB to complete */
- if (called_uhci_finish_completion)
- wake_up_all(&uhci->waitqh);
- /* Really disable FSBR */
- if (!uhci->fsbr && uhci->fsbrtimeout && time_after_eq(jiffies, uhci->fsbrtimeout)) {
- uhci->fsbrtimeout = 0;
- uhci->skel_term_qh->link = UHCI_PTR_TERM;
- }
+static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
+{
+ int port;
+
+ /* If we have to ignore overcurrent events then almost by definition
+ * we can't depend on resume-detect interrupts. */
+ if (ignore_oc)
+ return 1;
+
+ switch (to_pci_dev(uhci_dev(uhci))->vendor) {
+ default:
+ break;
- /* Poll for and perform state transitions */
- hc_state_transitions(uhci);
- if (unlikely(uhci->suspended_ports && uhci->state != UHCI_SUSPENDED))
- uhci_check_resume(uhci);
+ case PCI_VENDOR_ID_GENESYS:
+ /* Genesys Logic's GL880S controllers don't generate
+ * resume-detect interrupts.
+ */
+ return 1;
- init_stall_timer(hcd);
+ case PCI_VENDOR_ID_INTEL:
+ /* Some of Intel's USB controllers have a bug that causes
+ * resume-detect interrupts if any port has an over-current
+ * condition. To make matters worse, some motherboards
+ * hardwire unused USB ports' over-current inputs active!
+ * To prevent problems, we will not enable resume-detect
+ * interrupts if any ports are OC.
+ */
+ for (port = 0; port < uhci->rh_numports; ++port) {
+ if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+ USBPORTSC_OC)
+ return 1;
+ }
+ break;
+ }
+ return 0;
}
-static int init_stall_timer(struct usb_hcd *hcd)
+static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int port;
+ char *sys_info;
+ static char bad_Asus_board[] = "A7V8X";
- init_timer(&uhci->stall_timer);
- uhci->stall_timer.function = stall_callback;
- uhci->stall_timer.data = (unsigned long)hcd;
- uhci->stall_timer.expires = jiffies + msecs_to_jiffies(100);
- add_timer(&uhci->stall_timer);
+ /* One of Asus's motherboards has a bug which causes it to
+ * wake up immediately from suspend-to-RAM if any of the ports
+ * are connected. In such cases we will not set EGSM.
+ */
+ sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+ if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
+ for (port = 0; port < uhci->rh_numports; ++port) {
+ if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
+ USBPORTSC_CCS)
+ return 1;
+ }
+ }
return 0;
}
-static void uhci_free_pending_qhs(struct uhci_hcd *uhci)
+static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
+__releases(uhci->lock)
+__acquires(uhci->lock)
{
- struct uhci_qh *qh, *tmp;
+ int auto_stop;
+ int int_enable, egsm_enable;
- list_for_each_entry_safe(qh, tmp, &uhci->qh_remove_list, remove_list) {
- list_del_init(&qh->remove_list);
+ auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
+ dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
+ "%s%s\n", __FUNCTION__,
+ (auto_stop ? " (auto-stop)" : ""));
- uhci_free_qh(uhci, qh);
+ /* If we get a suspend request when we're already auto-stopped
+ * then there's nothing to do.
+ */
+ if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
+ uhci->rh_state = new_state;
+ return;
}
-}
-
-static void uhci_free_pending_tds(struct uhci_hcd *uhci)
-{
- struct uhci_td *td, *tmp;
- list_for_each_entry_safe(td, tmp, &uhci->td_remove_list, remove_list) {
- list_del_init(&td->remove_list);
+ /* Enable resume-detect interrupts if they work.
+ * Then enter Global Suspend mode if _it_ works, still configured.
+ */
+ egsm_enable = USBCMD_EGSM;
+ uhci->working_RD = 1;
+ int_enable = USBINTR_RESUME;
+ if (remote_wakeup_is_broken(uhci))
+ egsm_enable = 0;
+ if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
+ !device_may_wakeup(
+ &uhci_to_hcd(uhci)->self.root_hub->dev))
+ uhci->working_RD = int_enable = 0;
+
+ outw(int_enable, uhci->io_addr + USBINTR);
+ outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD);
+ mb();
+ udelay(5);
- uhci_free_td(uhci, td);
+ /* If we're auto-stopping then no devices have been attached
+ * for a while, so there shouldn't be any active URBs and the
+ * controller should stop after a few microseconds. Otherwise
+ * we will give the controller one frame to stop.
+ */
+ if (!auto_stop && !(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) {
+ uhci->rh_state = UHCI_RH_SUSPENDING;
+ spin_unlock_irq(&uhci->lock);
+ msleep(1);
+ spin_lock_irq(&uhci->lock);
+ if (uhci->dead)
+ return;
}
+ if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
+ dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev,
+ "Controller not stopped yet!\n");
+
+ uhci_get_current_frame_number(uhci);
+
+ uhci->rh_state = new_state;
+ uhci->is_stopped = UHCI_IS_STOPPED;
+ uhci_to_hcd(uhci)->poll_rh = !int_enable;
+
+ uhci_scan_schedule(uhci);
+ uhci_fsbr_off(uhci);
}
-static void
-uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
-__releases(uhci->schedule_lock)
-__acquires(uhci->schedule_lock)
+static void start_rh(struct uhci_hcd *uhci)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
+ uhci->is_stopped = 0;
- uhci_destroy_urb_priv(uhci, urb);
-
- spin_unlock(&uhci->schedule_lock);
- usb_hcd_giveback_urb(hcd, urb, regs);
- spin_lock(&uhci->schedule_lock);
+ /* Mark it configured and running with a 64-byte max packet.
+ * All interrupts are enabled, even though RESUME won't do anything.
+ */
+ outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, uhci->io_addr + USBCMD);
+ outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
+ uhci->io_addr + USBINTR);
+ mb();
+ uhci->rh_state = UHCI_RH_RUNNING;
+ uhci_to_hcd(uhci)->poll_rh = 1;
}
-static void uhci_finish_completion(struct usb_hcd *hcd, struct pt_regs *regs)
+static void wakeup_rh(struct uhci_hcd *uhci)
+__releases(uhci->lock)
+__acquires(uhci->lock)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- struct urb_priv *urbp, *tmp;
+ dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
+ "%s%s\n", __FUNCTION__,
+ uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
+ " (auto-start)" : "");
- list_for_each_entry_safe(urbp, tmp, &uhci->complete_list, urb_list) {
- struct urb *urb = urbp->urb;
+ /* If we are auto-stopped then no devices are attached so there's
+ * no need for wakeup signals. Otherwise we send Global Resume
+ * for 20 ms.
+ */
+ if (uhci->rh_state == UHCI_RH_SUSPENDED) {
+ uhci->rh_state = UHCI_RH_RESUMING;
+ outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
+ uhci->io_addr + USBCMD);
+ spin_unlock_irq(&uhci->lock);
+ msleep(20);
+ spin_lock_irq(&uhci->lock);
+ if (uhci->dead)
+ return;
- list_del_init(&urbp->urb_list);
- uhci_finish_urb(hcd, urb, regs);
+ /* End Global Resume and wait for EOP to be sent */
+ outw(USBCMD_CF, uhci->io_addr + USBCMD);
+ mb();
+ udelay(4);
+ if (inw(uhci->io_addr + USBCMD) & USBCMD_FGR)
+ dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
}
-}
-static void uhci_remove_pending_urbps(struct uhci_hcd *uhci)
-{
+ start_rh(uhci);
- /* Splice the urb_remove_list onto the end of the complete_list */
- list_splice_init(&uhci->urb_remove_list, uhci->complete_list.prev);
+ /* Restart root hub polling */
+ mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
}
-static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
+static irqreturn_t uhci_irq(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- unsigned long io_addr = uhci->io_addr;
unsigned short status;
- struct urb_priv *urbp, *tmp;
- unsigned int age;
+ unsigned long flags;
/*
* Read the interrupt status, and write it back to clear the
* interrupt cause. Contrary to the UHCI specification, the
* "HC Halted" status bit is persistent: it is RO, not R/WC.
*/
- status = inw(io_addr + USBSTS);
+ status = inw(uhci->io_addr + USBSTS);
if (!(status & ~USBSTS_HCH)) /* shared interrupt, not mine */
return IRQ_NONE;
- outw(status, io_addr + USBSTS); /* Clear it */
+ outw(status, uhci->io_addr + USBSTS); /* Clear it */
if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
if (status & USBSTS_HSE)
if (status & USBSTS_HCPE)
dev_err(uhci_dev(uhci), "host controller process "
"error, something bad happened!\n");
- if ((status & USBSTS_HCH) && uhci->state > 0) {
- dev_err(uhci_dev(uhci), "host controller halted, "
+ if (status & USBSTS_HCH) {
+ spin_lock_irqsave(&uhci->lock, flags);
+ if (uhci->rh_state >= UHCI_RH_RUNNING) {
+ dev_err(uhci_dev(uhci),
+ "host controller halted, "
"very bad!\n");
- /* FIXME: Reset the controller, fix the offending TD */
+ if (debug > 1 && errbuf) {
+ /* Print the schedule for debugging */
+ uhci_sprint_schedule(uhci,
+ errbuf, ERRBUF_LEN);
+ lprintk(errbuf);
+ }
+ uhci_hc_died(uhci);
+
+ /* Force a callback in case there are
+ * pending unlinks */
+ mod_timer(&hcd->rh_timer, jiffies);
+ }
+ spin_unlock_irqrestore(&uhci->lock, flags);
}
}
if (status & USBSTS_RD)
- uhci->resume_detect = 1;
-
- spin_lock(&uhci->schedule_lock);
-
- age = uhci_get_current_frame_number(uhci);
- if (age != uhci->qh_remove_age)
- uhci_free_pending_qhs(uhci);
- if (age != uhci->td_remove_age)
- uhci_free_pending_tds(uhci);
- if (age != uhci->urb_remove_age)
- uhci_remove_pending_urbps(uhci);
-
- if (list_empty(&uhci->urb_remove_list) &&
- list_empty(&uhci->td_remove_list) &&
- list_empty(&uhci->qh_remove_list))
- uhci_clear_next_interrupt(uhci);
- else
- uhci_set_next_interrupt(uhci);
-
- /* Walk the list of pending URBs to see which ones completed
- * (must be _safe because uhci_transfer_result() dequeues URBs) */
- list_for_each_entry_safe(urbp, tmp, &uhci->urb_list, urb_list) {
- struct urb *urb = urbp->urb;
-
- /* Checks the status and does all of the magic necessary */
- uhci_transfer_result(uhci, urb);
+ usb_hcd_poll_rh_status(hcd);
+ else {
+ spin_lock_irqsave(&uhci->lock, flags);
+ uhci_scan_schedule(uhci);
+ spin_unlock_irqrestore(&uhci->lock, flags);
}
- uhci_finish_completion(hcd, regs);
-
- spin_unlock(&uhci->schedule_lock);
-
- /* Wake up anyone waiting for an URB to complete */
- wake_up_all(&uhci->waitqh);
return IRQ_HANDLED;
}
-static void reset_hc(struct uhci_hcd *uhci)
-{
- unsigned long io_addr = uhci->io_addr;
-
- /* Turn off PIRQ, SMI, and all interrupts. This also turns off
- * the BIOS's USB Legacy Support.
- */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
- outw(0, uhci->io_addr + USBINTR);
-
- /* Global reset for 50ms */
- uhci->state = UHCI_RESET;
- outw(USBCMD_GRESET, io_addr + USBCMD);
- msleep(50);
- outw(0, io_addr + USBCMD);
-
- /* Another 10ms delay */
- msleep(10);
- uhci->resume_detect = 0;
-}
-
-static void suspend_hc(struct uhci_hcd *uhci)
-{
- unsigned long io_addr = uhci->io_addr;
-
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
- uhci->state = UHCI_SUSPENDED;
- uhci->resume_detect = 0;
- outw(USBCMD_EGSM, io_addr + USBCMD);
-}
-
-static void wakeup_hc(struct uhci_hcd *uhci)
+/*
+ * Store the current frame number in uhci->frame_number if the controller
+ * is runnning. Expand from 11 bits (of which we use only 10) to a
+ * full-sized integer.
+ *
+ * Like many other parts of the driver, this code relies on being polled
+ * more than once per second as long as the controller is running.
+ */
+static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
{
- unsigned long io_addr = uhci->io_addr;
-
- switch (uhci->state) {
- case UHCI_SUSPENDED: /* Start the resume */
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
-
- /* Global resume for >= 20ms */
- outw(USBCMD_FGR | USBCMD_EGSM, io_addr + USBCMD);
- uhci->state = UHCI_RESUMING_1;
- uhci->state_end = jiffies + msecs_to_jiffies(20);
- break;
+ if (!uhci->is_stopped) {
+ unsigned delta;
- case UHCI_RESUMING_1: /* End global resume */
- uhci->state = UHCI_RESUMING_2;
- outw(0, io_addr + USBCMD);
- /* Falls through */
-
- case UHCI_RESUMING_2: /* Wait for EOP to be sent */
- if (inw(io_addr + USBCMD) & USBCMD_FGR)
- break;
-
- /* Run for at least 1 second, and
- * mark it configured with a 64-byte max packet */
- uhci->state = UHCI_RUNNING_GRACE;
- uhci->state_end = jiffies + HZ;
- outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP,
- io_addr + USBCMD);
- break;
-
- case UHCI_RUNNING_GRACE: /* Now allowed to suspend */
- uhci->state = UHCI_RUNNING;
- break;
-
- default:
- break;
+ delta = (inw(uhci->io_addr + USBFRNUM) - uhci->frame_number) &
+ (UHCI_NUMFRAMES - 1);
+ uhci->frame_number += delta;
}
}
-static int ports_active(struct uhci_hcd *uhci)
-{
- unsigned long io_addr = uhci->io_addr;
- int connection = 0;
- int i;
-
- for (i = 0; i < uhci->rh_numports; i++)
- connection |= (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_CCS);
-
- return connection;
-}
-
-static int suspend_allowed(struct uhci_hcd *uhci)
+/*
+ * De-allocate all resources
+ */
+static void release_uhci(struct uhci_hcd *uhci)
{
- unsigned long io_addr = uhci->io_addr;
int i;
- if (to_pci_dev(uhci_dev(uhci))->vendor != PCI_VENDOR_ID_INTEL)
- return 1;
-
- /* Some of Intel's USB controllers have a bug that causes false
- * resume indications if any port has an over current condition.
- * To prevent problems, we will not allow a global suspend if
- * any ports are OC.
- *
- * Some motherboards using Intel's chipsets (but not using all
- * the USB ports) appear to hardwire the over current inputs active
- * to disable the USB ports.
- */
+ if (DEBUG_CONFIGURED) {
+ spin_lock_irq(&uhci->lock);
+ uhci->is_initialized = 0;
+ spin_unlock_irq(&uhci->lock);
- /* check for over current condition on any port */
- for (i = 0; i < uhci->rh_numports; i++) {
- if (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_OC)
- return 0;
+ debugfs_remove(uhci->dentry);
}
- return 1;
-}
-
-static void hc_state_transitions(struct uhci_hcd *uhci)
-{
- switch (uhci->state) {
- case UHCI_RUNNING:
-
- /* global suspend if nothing connected for 1 second */
- if (!ports_active(uhci) && suspend_allowed(uhci)) {
- uhci->state = UHCI_SUSPENDING_GRACE;
- uhci->state_end = jiffies + HZ;
- }
- break;
+ for (i = 0; i < UHCI_NUM_SKELQH; i++)
+ uhci_free_qh(uhci, uhci->skelqh[i]);
- case UHCI_SUSPENDING_GRACE:
- if (ports_active(uhci))
- uhci->state = UHCI_RUNNING;
- else if (time_after_eq(jiffies, uhci->state_end))
- suspend_hc(uhci);
- break;
+ uhci_free_td(uhci, uhci->term_td);
- case UHCI_SUSPENDED:
+ dma_pool_destroy(uhci->qh_pool);
- /* wakeup if requested by a device */
- if (uhci->resume_detect)
- wakeup_hc(uhci);
- break;
+ dma_pool_destroy(uhci->td_pool);
- case UHCI_RESUMING_1:
- case UHCI_RESUMING_2:
- case UHCI_RUNNING_GRACE:
- if (time_after_eq(jiffies, uhci->state_end))
- wakeup_hc(uhci);
- break;
+ kfree(uhci->frame_cpu);
- default:
- break;
- }
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
}
-static int start_hc(struct uhci_hcd *uhci)
+static int uhci_init(struct usb_hcd *hcd)
{
- unsigned long io_addr = uhci->io_addr;
- int timeout = 10;
-
- /*
- * Reset the HC - this will force us to get a
- * new notification of any already connected
- * ports due to the virtual disconnect that it
- * implies.
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ unsigned io_size = (unsigned) hcd->rsrc_len;
+ int port;
+
+ uhci->io_addr = (unsigned long) hcd->rsrc_start;
+
+ /* The UHCI spec says devices must have 2 ports, and goes on to say
+ * they may have more but gives no way to determine how many there
+ * are. However according to the UHCI spec, Bit 7 of the port
+ * status and control register is always set to 1. So we try to
+ * use this to our advantage. Another common failure mode when
+ * a nonexistent register is addressed is to return all ones, so
+ * we test for that also.
*/
- outw(USBCMD_HCRESET, io_addr + USBCMD);
- while (inw(io_addr + USBCMD) & USBCMD_HCRESET) {
- if (--timeout < 0) {
- dev_err(uhci_dev(uhci), "USBCMD_HCRESET timed out!\n");
- return -ETIMEDOUT;
- }
- msleep(1);
- }
-
- /* Turn on PIRQ and all interrupts */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_DEFAULT);
- outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
- io_addr + USBINTR);
-
- /* Start at frame 0 */
- outw(0, io_addr + USBFRNUM);
- outl(uhci->fl->dma_handle, io_addr + USBFLBASEADD);
-
- /* Run and mark it configured with a 64-byte max packet */
- uhci->state = UHCI_RUNNING_GRACE;
- uhci->state_end = jiffies + HZ;
- outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, io_addr + USBCMD);
-
- uhci_to_hcd(uhci)->state = USB_STATE_RUNNING;
- return 0;
-}
-
-/*
- * De-allocate all resources..
- */
-static void release_uhci(struct uhci_hcd *uhci)
-{
- int i;
-
- for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
- uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
-
- if (uhci->term_td) {
- uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
- }
-
- if (uhci->qh_pool) {
- dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
- }
+ for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
+ unsigned int portstatus;
- if (uhci->td_pool) {
- dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
+ portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2));
+ if (!(portstatus & 0x0080) || portstatus == 0xffff)
+ break;
}
+ if (debug)
+ dev_info(uhci_dev(uhci), "detected %d ports\n", port);
- if (uhci->fl) {
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
+ /* Anything greater than 7 is weird so we'll ignore it. */
+ if (port > UHCI_RH_MAXCHILD) {
+ dev_info(uhci_dev(uhci), "port count misdetected? "
+ "forcing to 2 ports\n");
+ port = 2;
}
+ uhci->rh_numports = port;
- if (uhci->dentry) {
- debugfs_remove(uhci->dentry);
- uhci->dentry = NULL;
- }
+ /* Kick BIOS off this hardware and reset if the controller
+ * isn't already safely quiescent.
+ */
+ check_and_reset_hc(uhci);
+ return 0;
}
-static int uhci_reset(struct usb_hcd *hcd)
+/* Make sure the controller is quiescent and that we're not using it
+ * any more. This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel. Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_shutdown(struct pci_dev *pdev)
{
- struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
- uhci->io_addr = (unsigned long) hcd->regs;
-
- /* Kick BIOS off this hardware and reset, so we won't get
- * interrupts from any previous setup.
- */
- reset_hc(uhci);
- return 0;
+ uhci_hc_died(hcd_to_uhci(hcd));
}
/*
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int retval = -EBUSY;
- int i, port;
- unsigned io_size;
- dma_addr_t dma_handle;
- struct usb_device *udev;
+ int i;
struct dentry *dentry;
- io_size = pci_resource_len(to_pci_dev(uhci_dev(uhci)), hcd->region);
-
- dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, &uhci_debug_operations);
- if (!dentry) {
- dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
- retval = -ENOMEM;
- goto err_create_debug_entry;
- }
- uhci->dentry = dentry;
-
- uhci->fsbr = 0;
- uhci->fsbrtimeout = 0;
-
- spin_lock_init(&uhci->schedule_lock);
- INIT_LIST_HEAD(&uhci->qh_remove_list);
-
- INIT_LIST_HEAD(&uhci->td_remove_list);
-
- INIT_LIST_HEAD(&uhci->urb_remove_list);
-
- INIT_LIST_HEAD(&uhci->urb_list);
-
- INIT_LIST_HEAD(&uhci->complete_list);
+ hcd->uses_new_polling = 1;
+ spin_lock_init(&uhci->lock);
+ setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout,
+ (unsigned long) uhci);
+ INIT_LIST_HEAD(&uhci->idle_qh_list);
init_waitqueue_head(&uhci->waitqh);
- uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- &dma_handle, 0);
- if (!uhci->fl) {
+ if (DEBUG_CONFIGURED) {
+ dentry = debugfs_create_file(hcd->self.bus_name,
+ S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
+ uhci, &uhci_debug_operations);
+ if (!dentry) {
+ dev_err(uhci_dev(uhci), "couldn't create uhci "
+ "debugfs entry\n");
+ retval = -ENOMEM;
+ goto err_create_debug_entry;
+ }
+ uhci->dentry = dentry;
+ }
+
+ uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ &uhci->frame_dma_handle, 0);
+ if (!uhci->frame) {
dev_err(uhci_dev(uhci), "unable to allocate "
"consistent memory for frame list\n");
- goto err_alloc_fl;
+ goto err_alloc_frame;
}
+ memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
- memset((void *)uhci->fl, 0, sizeof(*uhci->fl));
-
- uhci->fl->dma_handle = dma_handle;
+ uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
+ GFP_KERNEL);
+ if (!uhci->frame_cpu) {
+ dev_err(uhci_dev(uhci), "unable to allocate "
+ "memory for frame pointers\n");
+ goto err_alloc_frame_cpu;
+ }
uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
sizeof(struct uhci_td), 16, 0);
goto err_create_qh_pool;
}
- /* Initialize the root hub */
-
- /* UHCI specs says devices must have 2 ports, but goes on to say */
- /* they may have more but give no way to determine how many they */
- /* have. However, according to the UHCI spec, Bit 7 is always set */
- /* to 1. So we try to use this to our advantage */
- for (port = 0; port < (io_size - 0x10) / 2; port++) {
- unsigned int portstatus;
-
- portstatus = inw(uhci->io_addr + 0x10 + (port * 2));
- if (!(portstatus & 0x0080))
- break;
- }
- if (debug)
- dev_info(uhci_dev(uhci), "detected %d ports\n", port);
-
- /* This is experimental so anything less than 2 or greater than 8 is */
- /* something weird and we'll ignore it */
- if (port < 2 || port > UHCI_RH_MAXCHILD) {
- dev_info(uhci_dev(uhci), "port count misdetected? "
- "forcing to 2 ports\n");
- port = 2;
- }
-
- uhci->rh_numports = port;
-
- udev = usb_alloc_dev(NULL, &hcd->self, 0);
- if (!udev) {
- dev_err(uhci_dev(uhci), "unable to allocate root hub\n");
- goto err_alloc_root_hub;
- }
-
- uhci->term_td = uhci_alloc_td(uhci, udev);
+ uhci->term_td = uhci_alloc_td(uhci);
if (!uhci->term_td) {
dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
goto err_alloc_term_td;
}
for (i = 0; i < UHCI_NUM_SKELQH; i++) {
- uhci->skelqh[i] = uhci_alloc_qh(uhci, udev);
+ uhci->skelqh[i] = uhci_alloc_qh(uhci, NULL, NULL);
if (!uhci->skelqh[i]) {
dev_err(uhci_dev(uhci), "unable to allocate QH\n");
goto err_alloc_skelqh;
uhci->skel_int16_qh->link =
uhci->skel_int8_qh->link =
uhci->skel_int4_qh->link =
- uhci->skel_int2_qh->link =
- cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
- uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
-
- uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
- uhci->skel_fs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
- uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
+ uhci->skel_int2_qh->link = UHCI_PTR_QH |
+ cpu_to_le32(uhci->skel_int1_qh->dma_handle);
+
+ uhci->skel_int1_qh->link = UHCI_PTR_QH |
+ cpu_to_le32(uhci->skel_ls_control_qh->dma_handle);
+ uhci->skel_ls_control_qh->link = UHCI_PTR_QH |
+ cpu_to_le32(uhci->skel_fs_control_qh->dma_handle);
+ uhci->skel_fs_control_qh->link = UHCI_PTR_QH |
+ cpu_to_le32(uhci->skel_bulk_qh->dma_handle);
+ uhci->skel_bulk_qh->link = UHCI_PTR_QH |
+ cpu_to_le32(uhci->skel_term_qh->dma_handle);
/* This dummy TD is to work around a bug in Intel PIIX controllers */
- uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
+ uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
/*
* ffs (Find First bit Set) does exactly what we need:
- * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[6],
- * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[5], etc.
- * ffs > 6 => not on any high-period queue, so use
- * skel_int1_qh = skelqh[7].
+ * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8],
+ * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
+ * ffs >= 7 => not on any high-period queue, so use
+ * skel_int1_qh = skelqh[9].
* Add UHCI_NUMFRAMES to insure at least one bit is set.
*/
- irq = 6 - (int) __ffs(i + UHCI_NUMFRAMES);
- if (irq < 0)
- irq = 7;
+ irq = 8 - (int) __ffs(i + UHCI_NUMFRAMES);
+ if (irq <= 1)
+ irq = 9;
/* Only place we don't use the frame list routines */
- uhci->fl->frame[i] = UHCI_PTR_QH |
+ uhci->frame[i] = UHCI_PTR_QH |
cpu_to_le32(uhci->skelqh[irq]->dma_handle);
}
/*
* Some architectures require a full mb() to enforce completion of
- * the memory writes above before the I/O transfers in start_hc().
+ * the memory writes above before the I/O transfers in configure_hc().
*/
mb();
- if ((retval = start_hc(uhci)) != 0)
- goto err_alloc_skelqh;
-
- init_stall_timer(hcd);
-
- udev->speed = USB_SPEED_FULL;
-
- if (hcd_register_root(udev, hcd) != 0) {
- dev_err(uhci_dev(uhci), "unable to start root hub\n");
- retval = -ENOMEM;
- goto err_start_root_hub;
- }
+ configure_hc(uhci);
+ uhci->is_initialized = 1;
+ start_rh(uhci);
return 0;
/*
* error exits:
*/
-err_start_root_hub:
- reset_hc(uhci);
-
- del_timer_sync(&uhci->stall_timer);
-
err_alloc_skelqh:
- for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
+ for (i = 0; i < UHCI_NUM_SKELQH; i++) {
+ if (uhci->skelqh[i])
uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
+ }
uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
err_alloc_term_td:
- usb_put_dev(udev);
-
-err_alloc_root_hub:
dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
err_create_qh_pool:
dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
err_create_td_pool:
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
+ kfree(uhci->frame_cpu);
+
+err_alloc_frame_cpu:
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
-err_alloc_fl:
+err_alloc_frame:
debugfs_remove(uhci->dentry);
- uhci->dentry = NULL;
err_create_debug_entry:
return retval;
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- del_timer_sync(&uhci->stall_timer);
+ spin_lock_irq(&uhci->lock);
+ if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead)
+ uhci_hc_died(uhci);
+ uhci_scan_schedule(uhci);
+ spin_unlock_irq(&uhci->lock);
- /*
- * At this point, we're guaranteed that no new connects can be made
- * to this bus since there are no more parents
- */
+ del_timer_sync(&uhci->fsbr_timer);
+ release_uhci(uhci);
+}
- reset_hc(uhci);
+#ifdef CONFIG_PM
+static int uhci_rh_suspend(struct usb_hcd *hcd)
+{
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int rc = 0;
- spin_lock_irq(&uhci->schedule_lock);
- uhci_free_pending_qhs(uhci);
- uhci_free_pending_tds(uhci);
- uhci_remove_pending_urbps(uhci);
- uhci_finish_completion(hcd, NULL);
+ spin_lock_irq(&uhci->lock);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ rc = -ESHUTDOWN;
+ else if (!uhci->dead)
+ suspend_rh(uhci, UHCI_RH_SUSPENDED);
+ spin_unlock_irq(&uhci->lock);
+ return rc;
+}
- uhci_free_pending_qhs(uhci);
- uhci_free_pending_tds(uhci);
- spin_unlock_irq(&uhci->schedule_lock);
+static int uhci_rh_resume(struct usb_hcd *hcd)
+{
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int rc = 0;
- /* Wake up anyone waiting for an URB to complete */
- wake_up_all(&uhci->waitqh);
-
- release_uhci(uhci);
+ spin_lock_irq(&uhci->lock);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ dev_warn(&hcd->self.root_hub->dev, "HC isn't running!\n");
+ rc = -ESHUTDOWN;
+ } else if (!uhci->dead)
+ wakeup_rh(uhci);
+ spin_unlock_irq(&uhci->lock);
+ return rc;
}
-#ifdef CONFIG_PM
-static int uhci_suspend(struct usb_hcd *hcd, u32 state)
+static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int rc = 0;
- /* Don't try to suspend broken motherboards, reset instead */
- if (suspend_allowed(uhci)) {
- suspend_hc(uhci);
- uhci->saved_framenumber =
- inw(uhci->io_addr + USBFRNUM) & 0x3ff;
- } else
- reset_hc(uhci);
- return 0;
+ dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+
+ spin_lock_irq(&uhci->lock);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
+ goto done_okay; /* Already suspended or dead */
+
+ if (uhci->rh_state > UHCI_RH_SUSPENDED) {
+ dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
+ rc = -EBUSY;
+ goto done;
+ };
+
+ /* All PCI host controllers are required to disable IRQ generation
+ * at the source, so we must turn off PIRQ.
+ */
+ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
+ mb();
+ hcd->poll_rh = 0;
+
+ /* FIXME: Enable non-PME# remote wakeup? */
+
+ /* make sure snapshot being resumed re-enumerates everything */
+ if (message.event == PM_EVENT_PRETHAW)
+ uhci_hc_died(uhci);
+
+done_okay:
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+done:
+ spin_unlock_irq(&uhci->lock);
+ return rc;
}
static int uhci_resume(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- int rc;
- pci_set_master(to_pci_dev(uhci_dev(uhci)));
+ dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+
+ /* Since we aren't in D3 any more, it's safe to set this flag
+ * even if the controller was dead.
+ */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ mb();
- if (uhci->state == UHCI_SUSPENDED) {
+ spin_lock_irq(&uhci->lock);
- /*
- * Some systems don't maintain the UHCI register values
- * during a PM suspend/resume cycle, so reinitialize
- * the Frame Number, Framelist Base Address, Interrupt
- * Enable, and Legacy Support registers.
- */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- 0);
- outw(uhci->saved_framenumber, uhci->io_addr + USBFRNUM);
- outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
- outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC |
- USBINTR_SP, uhci->io_addr + USBINTR);
- uhci->resume_detect = 1;
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_DEFAULT);
- } else {
- reset_hc(uhci);
- if ((rc = start_hc(uhci)) != 0)
- return rc;
+ /* FIXME: Disable non-PME# remote wakeup? */
+
+ /* The firmware or a boot kernel may have changed the controller
+ * settings during a system wakeup. Check it and reconfigure
+ * to avoid problems.
+ */
+ check_and_reset_hc(uhci);
+
+ /* If the controller was dead before, it's back alive now */
+ configure_hc(uhci);
+
+ if (uhci->rh_state == UHCI_RH_RESET) {
+
+ /* The controller had to be reset */
+ usb_root_hub_lost_power(hcd->self.root_hub);
+ suspend_rh(uhci, UHCI_RH_SUSPENDED);
+ }
+
+ spin_unlock_irq(&uhci->lock);
+
+ if (!uhci->working_RD) {
+ /* Suspended root hub needs to be polled */
+ hcd->poll_rh = 1;
+ usb_hcd_poll_rh_status(hcd);
}
- hcd->state = USB_STATE_RUNNING;
return 0;
}
#endif
-/* Wait until all the URBs for a particular device/endpoint are gone */
+/* Wait until a particular device/endpoint's QH is idle, and free it */
static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep)
+ struct usb_host_endpoint *hep)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ struct uhci_qh *qh;
+
+ spin_lock_irq(&uhci->lock);
+ qh = (struct uhci_qh *) hep->hcpriv;
+ if (qh == NULL)
+ goto done;
- wait_event_interruptible(uhci->waitqh, list_empty(&ep->urb_list));
+ while (qh->state != QH_STATE_IDLE) {
+ ++uhci->num_waiting;
+ spin_unlock_irq(&uhci->lock);
+ wait_event_interruptible(uhci->waitqh,
+ qh->state == QH_STATE_IDLE);
+ spin_lock_irq(&uhci->lock);
+ --uhci->num_waiting;
+ }
+
+ uhci_free_qh(uhci, qh);
+done:
+ spin_unlock_irq(&uhci->lock);
}
static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
{
- return uhci_get_current_frame_number(hcd_to_uhci(hcd));
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ unsigned frame_number;
+ unsigned delta;
+
+ /* Minimize latency by avoiding the spinlock */
+ frame_number = uhci->frame_number;
+ barrier();
+ delta = (inw(uhci->io_addr + USBFRNUM) - frame_number) &
+ (UHCI_NUMFRAMES - 1);
+ return frame_number + delta;
}
static const char hcd_name[] = "uhci_hcd";
.flags = HCD_USB11,
/* Basic lifecycle operations */
- .reset = uhci_reset,
+ .reset = uhci_init,
.start = uhci_start,
#ifdef CONFIG_PM
.suspend = uhci_suspend,
.resume = uhci_resume,
+ .bus_suspend = uhci_rh_suspend,
+ .bus_resume = uhci_rh_resume,
#endif
.stop = uhci_stop,
static const struct pci_device_id uhci_pci_ids[] = { {
/* handle any USB UHCI controller */
- PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
.driver_data = (unsigned long) &uhci_driver,
}, { /* end: all zeroes */ }
};
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
+ .shutdown = uhci_shutdown,
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
{
int retval = -ENOMEM;
- printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
+ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "%s\n",
+ ignore_oc ? ", overcurrent ignored" : "");
if (usb_disabled())
return -ENODEV;
- if (debug) {
+ if (DEBUG_CONFIGURED) {
errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
if (!errbuf)
goto errbuf_failed;
+ uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
+ if (!uhci_debugfs_root)
+ goto debug_failed;
}
- uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
- if (!uhci_debugfs_root)
- goto debug_failed;
-
uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
sizeof(struct urb_priv), 0, 0, NULL, NULL);
if (!uhci_up_cachep)
return 0;
init_failed:
- if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_priv's were freed!");
+ kmem_cache_destroy(uhci_up_cachep);
up_failed:
debugfs_remove(uhci_debugfs_root);
debug_failed:
- if (errbuf)
- kfree(errbuf);
+ kfree(errbuf);
errbuf_failed:
static void __exit uhci_hcd_cleanup(void)
{
pci_unregister_driver(&uhci_pci_driver);
-
- if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_priv's were freed!");
-
+ kmem_cache_destroy(uhci_up_cachep);
debugfs_remove(uhci_debugfs_root);
-
- if (errbuf)
- kfree(errbuf);
+ kfree(errbuf);
}
module_init(uhci_hcd_init);
git://git.onelab.eu / linux-2.6.git / blobdiff