#
# USB Input driver configuration
#
-comment "USB Human Interface Devices (HID)"
+comment "USB Input Devices"
depends on USB
config USB_HID
mice, joysticks, graphic tablets, or any other HID based devices
to your computer via USB. You also need to select HID Input layer
support (below) if you want to use keyboards, mice, joysticks and
- the like.
+ the like ... as well as Uninterruptible Power Supply (UPS) and
+ monitor control devices.
You can't use this driver and the HIDBP (Boot Protocol) keyboard
and mouse drivers at the same time. More information is available:
module will be called usbhid.
comment "Input core support is needed for USB HID input layer or HIDBP support"
- depends on USB && INPUT=n
+ depends on USB_HID && INPUT=n
config USB_HIDINPUT
bool "HID input layer support"
depends on INPUT && USB_HID
help
Say Y here if you want to use a USB keyboard, mouse or joystick,
- or any other HID input device. You also need "Input core support",
- (CONFIG_INPUT), which you select under "Input device support", above.
+ or any other HID input device.
If unsure, say Y.
+config USB_HIDINPUT_POWERBOOK
+ bool "Enable support for iBook/PowerBook special keys"
+ default n
+ depends on USB_HIDINPUT
+ help
+ Say Y here if you want support for the special keys (Fn, Numlock) on
+ Apple iBooks and PowerBooks.
+
+ If unsure, say N.
+
config HID_FF
bool "Force feedback support (EXPERIMENTAL)"
depends on USB_HIDINPUT && EXPERIMENTAL
This module supports these devices separately using a separate
event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
- This driver requires CONFIG_USB_HID.
If unsure, say Y.
To compile this driver as a module, choose M here: the
module will be called wacom.
+config USB_ACECAD
+ tristate "Acecad Flair tablet support"
+ depends on USB && INPUT
+ help
+ Say Y here if you want to use the USB version of the Acecad Flair
+ tablet. Make sure to say Y to "Mouse support"
+ (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acecad.
+
config USB_KBTAB
tristate "KB Gear JamStudio tablet support"
depends on USB && INPUT
To compile this driver as a module, choose M here: the
module will be called powermate.
-config USB_MTOUCH
- tristate "MicroTouch USB Touchscreen Driver"
+config USB_TOUCHSCREEN
+ tristate "USB Touchscreen Driver"
depends on USB && INPUT
---help---
- Say Y here if you want to use a MicroTouch (Now 3M) USB
- Touchscreen controller.
+ USB Touchscreen driver for:
+ - eGalax Touchkit USB
+ - PanJit TouchSet USB
+ - 3M MicroTouch USB
+ - ITM
- See <file:Documentation/usb/mtouch.txt> for additional information.
+ Have a look at <http://linux.chapter7.ch/touchkit/> for
+ a usage description and the required user-space stuff.
To compile this driver as a module, choose M here: the
- module will be called mtouchusb.
+ module will be called usbtouchscreen.
+
+config USB_TOUCHSCREEN_EGALAX
+ default y
+ bool "eGalax device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
+
+config USB_TOUCHSCREEN_PANJIT
+ default y
+ bool "PanJit device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
+
+config USB_TOUCHSCREEN_3M
+ default y
+ bool "3M/Microtouch device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
+
+config USB_TOUCHSCREEN_ITM
+ default y
+ bool "ITM device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
+
+config USB_YEALINK
+ tristate "Yealink usb-p1k voip phone"
+ depends on USB && INPUT && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to enable keyboard and LCD functions of the
+ Yealink usb-p1k usb phones. The audio part is enabled by the generic
+ usb sound driver, so you might want to enable that as well.
+
+ For information about how to use these additional functions, see
+ <file:Documentation/input/yealink.txt>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called yealink.
config USB_XPAD
tristate "X-Box gamepad support"
module will be called xpad.
config USB_ATI_REMOTE
- tristate "ATI USB RF remote control"
+ tristate "ATI / X10 USB RF remote control"
depends on USB && INPUT
---help---
- Say Y here if you want to use one of ATI's USB remote controls.
- These are RF remotes with USB receivers. They come with many of ATI's
- All-In-Wonder video cards. This driver provides mouse pointer, left
- and right mouse buttons, and maps all the other remote buttons to
- keypress events.
+ Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+ These are RF remotes with USB receivers.
+ The ATI remote comes with many of ATI's All-In-Wonder video cards.
+ The X10 "Lola" remote is available at:
+ <http://www.x10.com/products/lola_sg1.htm>
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
To compile this driver as a module, choose M here: the module will be
called ati_remote.
+config USB_ATI_REMOTE2
+ tristate "ATI / Philips USB RF remote control"
+ depends on USB && INPUT
+ ---help---
+ Say Y here if you want to use an ATI or Philips USB RF remote control.
+ These are RF remotes with USB receivers.
+ ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+ and is also available as a separate product.
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote2.
+
+config USB_KEYSPAN_REMOTE
+ tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
+ depends on USB && INPUT && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use a Keyspan DMR USB remote control.
+ Currently only the UIA-11 type of receiver has been tested. The tag
+ on the receiver that connects to the USB port should have a P/N that
+ will tell you what type of DMR you have. The UIA-10 type is not
+ supported at this time. This driver maps all buttons to keypress
+ events.
+
+ To compile this driver as a module, choose M here: the module will
+ be called keyspan_remote.
+
+config USB_APPLETOUCH
+ tristate "Apple USB Touchpad support"
+ depends on USB && INPUT
+ ---help---
+ Say Y here if you want to use an Apple USB Touchpad.
+
+ These are the touchpads that can be found on post-February 2005
+ Apple Powerbooks (prior models have a Synaptics touchpad connected
+ to the ADB bus).
+
+ This driver provides a basic mouse driver but can be interfaced
+ with the synaptics X11 driver to provide acceleration and
+ scrolling in X11.
+
+ For further information, see
+ <file:Documentation/input/appletouch.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called appletouch.
git://git.onelab.eu / linux-2.6.git / blobdiff