#define APPLE_VENDOR_ID 0x05AC
/* These names come from Info.plist in AppleUSBTrackpad.kext */
-#define GEYSER_ANSI_PRODUCT_ID 0x0214
-#define GEYSER_ISO_PRODUCT_ID 0x0215
-#define GEYSER_JIS_PRODUCT_ID 0x0216
+#define FOUNTAIN_ANSI_PRODUCT_ID 0x020E
+#define FOUNTAIN_ISO_PRODUCT_ID 0x020F
+
+#define FOUNTAIN_TP_ONLY_PRODUCT_ID 0x030A
+
+#define GEYSER1_TP_ONLY_PRODUCT_ID 0x030B
+
+#define GEYSER_ANSI_PRODUCT_ID 0x0214
+#define GEYSER_ISO_PRODUCT_ID 0x0215
+#define GEYSER_JIS_PRODUCT_ID 0x0216
/* MacBook devices */
-#define GEYSER3_ANSI_PRODUCT_ID 0x0217
-#define GEYSER3_ISO_PRODUCT_ID 0x0218
-#define GEYSER3_JIS_PRODUCT_ID 0x0219
+#define GEYSER3_ANSI_PRODUCT_ID 0x0217
+#define GEYSER3_ISO_PRODUCT_ID 0x0218
+#define GEYSER3_JIS_PRODUCT_ID 0x0219
+
+/*
+ * Geyser IV: same as Geyser III according to Info.plist in AppleUSBTrackpad.kext
+ * -> same IOClass (AppleUSBGrIIITrackpad), same acceleration tables
+ */
+#define GEYSER4_ANSI_PRODUCT_ID 0x021A
+#define GEYSER4_ISO_PRODUCT_ID 0x021B
+#define GEYSER4_JIS_PRODUCT_ID 0x021C
#define ATP_DEVICE(prod) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
/* table of devices that work with this driver */
static struct usb_device_id atp_table [] = {
- { ATP_DEVICE(0x020E) },
- { ATP_DEVICE(0x020F) },
- { ATP_DEVICE(0x030A) },
- { ATP_DEVICE(0x030B) },
+ { ATP_DEVICE(FOUNTAIN_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_TP_ONLY_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER1_TP_ONLY_PRODUCT_ID) },
/* PowerBooks Oct 2005 */
{ ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) },
+ /* Core Duo MacBook & MacBook Pro */
{ ATP_DEVICE(GEYSER3_ANSI_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER3_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER3_JIS_PRODUCT_ID) },
+ /* Core2 Duo MacBook & MacBook Pro */
+ { ATP_DEVICE(GEYSER4_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
+
/* Terminating entry */
{ }
};
*/
#define ATP_THRESHOLD 5
-/* MacBook Pro (Geyser 3) initialization constants */
+/* MacBook Pro (Geyser 3 & 4) initialization constants */
#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1
#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9
#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300
MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver");
MODULE_LICENSE("GPL");
+/*
+ * Make the threshold a module parameter
+ */
+static int threshold = ATP_THRESHOLD;
+module_param(threshold, int, 0644);
+MODULE_PARM_DESC(threshold, "Discards any change in data from a sensor (trackpad has hundreds of these sensors) less than this value");
+
static int debug = 1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activate debugging output");
return (productId == GEYSER3_ANSI_PRODUCT_ID) ||
(productId == GEYSER3_ISO_PRODUCT_ID) ||
- (productId == GEYSER3_JIS_PRODUCT_ID);
+ (productId == GEYSER3_JIS_PRODUCT_ID) ||
+ (productId == GEYSER4_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER4_ISO_PRODUCT_ID) ||
+ (productId == GEYSER4_JIS_PRODUCT_ID);
}
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
int i;
/* values to calculate mean */
int pcum = 0, psum = 0;
+ int is_increasing = 0;
*fingers = 0;
for (i = 0; i < nb_sensors; i++) {
- if (xy_sensors[i] < ATP_THRESHOLD)
+ if (xy_sensors[i] < threshold) {
+ if (is_increasing)
+ is_increasing = 0;
+
continue;
- if ((i - 1 < 0) || (xy_sensors[i - 1] < ATP_THRESHOLD))
+ }
+
+ /*
+ * Makes the finger detection more versatile. For example,
+ * two fingers with no gap will be detected. Also, my
+ * tests show it less likely to have intermittent loss
+ * of multiple finger readings while moving around (scrolling).
+ *
+ * Changes the multiple finger detection to counting humps on
+ * sensors (transitions from nonincreasing to increasing)
+ * instead of counting transitions from low sensors (no
+ * finger reading) to high sensors (finger above
+ * sensor)
+ *
+ * - Jason Parekh <jasonparekh@gmail.com>
+ */
+ if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
(*fingers)++;
- pcum += xy_sensors[i] * i;
- psum += xy_sensors[i];
+ is_increasing = 1;
+ } else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) {
+ is_increasing = 0;
+ }
+
+ /*
+ * Subtracts threshold so a high sensor that just passes the threshold
+ * won't skew the calculated absolute coordinate. Fixes an issue
+ * where slowly moving the mouse would occassionaly jump a number of
+ * pixels (let me restate--slowly moving the mouse makes this issue
+ * most apparent).
+ */
+ pcum += (xy_sensors[i] - threshold) * i;
+ psum += (xy_sensors[i] - threshold);
}
if (psum > 0) {
input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
}
-static void atp_complete(struct urb* urb, struct pt_regs* regs)
+static void atp_complete(struct urb* urb)
{
int x, y, x_z, y_z, x_f, y_f;
int retval, i, j;
iface_desc = iface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
endpoint = &iface_desc->endpoint[i].desc;
- if (!int_in_endpointAddr &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
+ if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
/* we found an interrupt in endpoint */
int_in_endpointAddr = endpoint->bEndpointAddress;
break;
git://git.onelab.eu / linux-2.6.git / blobdiff