fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / usb / misc / emi26.c

diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 66920ab..5c0a26c 100644 (file)
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -30,6 +31,7 @@ typedef struct _INTEL_HEX_RECORD
 
 #define EMI26_VENDOR_ID                0x086a  /* Emagic Soft-und Hardware GmBH */
 #define EMI26_PRODUCT_ID               0x0100  /* EMI 2|6 without firmware */
+#define EMI26B_PRODUCT_ID              0x0102  /* EMI 2|6 without firmware */
 
 #define ANCHOR_LOAD_INTERNAL   0xA0    /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */
 #define ANCHOR_LOAD_EXTERNAL   0xA3    /* This command is not implemented in the core. Requires firmware */
@@ -51,13 +53,12 @@ static void __exit emi26_exit (void);
 static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
 {
        int result;
-       unsigned char *buffer =  kmalloc (length, GFP_KERNEL);
+       unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
 
        if (!buffer) {
                err("emi26: kmalloc(%d) failed.", length);
                return -ENOMEM;
        }
-       memcpy (buffer, data, length);
        /* Note: usb_control_msg returns negative value on error or length of the
         *               data that was written! */
        result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
@@ -113,6 +114,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 
        /* De-assert reset (let the CPU run) */
        err = emi26_set_reset(dev,0);
+       msleep(250);    /* let device settle */
 
        /* 2. We upload the FPGA firmware into the EMI
         * Note: collect up to 1023 (yes!) bytes and send them with
@@ -149,6 +151,7 @@ static int emi26_load_firmware (struct usb_device *dev)
                        goto wraperr;
                }
        }
+       msleep(250);    /* let device settle */
 
        /* De-assert reset (let the CPU run) */
        err = emi26_set_reset(dev,0);
@@ -191,6 +194,7 @@ static int emi26_load_firmware (struct usb_device *dev)
                err("%s - error loading firmware: error = %d", __FUNCTION__, err);
                goto wraperr;
        }
+       msleep(250);    /* let device settle */
 
        /* return 1 to fail the driver inialization
         * and give real driver change to load */
@@ -203,6 +207,7 @@ wraperr:
 
 static struct usb_device_id id_table [] = {
        { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) },
+       { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) },
        { }                                             /* Terminating entry */
 };
 
@@ -225,7 +230,6 @@ static void emi26_disconnect(struct usb_interface *intf)
 }
 
 static struct usb_driver emi26_driver = {
-       .owner          = THIS_MODULE,
        .name           = "emi26 - firmware loader",
        .probe          = emi26_probe,
        .disconnect     = emi26_disconnect,