* version 2 as published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/signal.h>
#define RX_URB_FAIL 3
/* Define these values to match your device */
-#define VENDOR_ID_REALTEK 0x0bda
+#define VENDOR_ID_REALTEK 0x0bda
#define VENDOR_ID_MELCO 0x0411
-#define VENDOR_ID_MICRONET 0x3980
+#define VENDOR_ID_MICRONET 0x3980
#define VENDOR_ID_LONGSHINE 0x07b8
+#define VENDOR_ID_OQO 0x1557
+#define VENDOR_ID_ZYXEL 0x0586
#define PRODUCT_ID_RTL8150 0x8150
#define PRODUCT_ID_LUAKTX 0x0012
#define PRODUCT_ID_LCS8138TX 0x401a
#define PRODUCT_ID_SP128AR 0x0003
+#define PRODUCT_ID_PRESTIGE 0x401a
#undef EEPROM_WRITE
{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+ {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
+ {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
{}
};
typedef struct rtl8150 rtl8150_t;
-static unsigned long multicast_filter_limit = 32;
-
static void fill_skb_pool(rtl8150_t *);
static void free_skb_pool(rtl8150_t *);
static inline struct sk_buff *pull_skb(rtl8150_t *);
static void rtl8150_disconnect(struct usb_interface *intf);
static int rtl8150_probe(struct usb_interface *intf,
const struct usb_device_id *id);
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message);
+static int rtl8150_resume(struct usb_interface *intf);
static const char driver_name [] = "rtl8150";
static struct usb_driver rtl8150_driver = {
- .owner = THIS_MODULE,
.name = driver_name,
.probe = rtl8150_probe,
.disconnect = rtl8150_disconnect,
.id_table = rtl8150_table,
+ .suspend = rtl8150_suspend,
+ .resume = rtl8150_resume
};
/*
{
return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
- indx, 0, data, size, HZ / 2);
+ indx, 0, data, size, 500);
}
static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
{
return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
- indx, 0, data, size, HZ / 2);
+ indx, 0, data, size, 500);
}
-static void ctrl_callback(struct urb *urb, struct pt_regs *regs)
+static void ctrl_callback(struct urb *urb)
{
rtl8150_t *dev;
usb_fill_control_urb(dev->ctrl_urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
&dev->rx_creg, size, ctrl_callback, dev);
- if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC)))
+ if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
+ if (ret == -ENODEV)
+ netif_device_detach(dev->netdev);
err("control request submission failed: %d", ret);
- else
+ } else
set_bit(RX_REG_SET, &dev->flags);
return ret;
u8 data[3], tmp;
data[0] = phy;
- *(data + 1) = cpu_to_le16p(®);
+ data[1] = reg & 0xff;
+ data[2] = (reg >> 8) & 0xff;
tmp = indx | PHY_WRITE | PHY_GO;
i = 0;
return NULL;
}
-static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
+static void read_bulk_callback(struct urb *urb)
{
rtl8150_t *dev;
unsigned pkt_len, res;
struct sk_buff *skb;
struct net_device *netdev;
u16 rx_stat;
+ int status;
dev = urb->context;
if (!dev)
break;
case -ENOENT:
return; /* the urb is in unlink state */
- case -ETIMEDOUT:
+ case -ETIME:
warn("may be reset is needed?..");
goto goon;
default:
goon:
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
- if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+ status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+ if (status == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else if (status) {
set_bit(RX_URB_FAIL, &dev->flags);
goto resched;
} else {
{
rtl8150_t *dev;
struct sk_buff *skb;
+ int status;
dev = (rtl8150_t *)data;
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
try_again:
- if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+ status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+ if (status == -ENODEV) {
+ netif_device_detach(dev->netdev);
+ } else if (status) {
set_bit(RX_URB_FAIL, &dev->flags);
goto tlsched;
- } else {
+ } else {
clear_bit(RX_URB_FAIL, &dev->flags);
}
tasklet_schedule(&dev->tl);
}
-static void write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+static void write_bulk_callback(struct urb *urb)
{
rtl8150_t *dev;
netif_wake_queue(dev->netdev);
}
-static void intr_callback(struct urb *urb, struct pt_regs *regs)
+static void intr_callback(struct urb *urb)
{
rtl8150_t *dev;
__u8 *d;
}
resubmit:
- status = usb_submit_urb (urb, SLAB_ATOMIC);
- if (status)
+ status = usb_submit_urb (urb, GFP_ATOMIC);
+ if (status == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else if (status)
err ("can't resubmit intr, %s-%s/input0, status %d",
dev->udev->bus->bus_name,
dev->udev->devpath, status);
}
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ rtl8150_t *dev = usb_get_intfdata(intf);
+
+ netif_device_detach(dev->netdev);
+
+ if (netif_running(dev->netdev)) {
+ usb_kill_urb(dev->rx_urb);
+ usb_kill_urb(dev->intr_urb);
+ }
+ return 0;
+}
+
+static int rtl8150_resume(struct usb_interface *intf)
+{
+ rtl8150_t *dev = usb_get_intfdata(intf);
+
+ netif_device_attach(dev->netdev);
+ if (netif_running(dev->netdev)) {
+ dev->rx_urb->status = 0;
+ dev->rx_urb->actual_length = 0;
+ read_bulk_callback(dev->rx_urb);
+
+ dev->intr_urb->status = 0;
+ dev->intr_urb->actual_length = 0;
+ intr_callback(dev->intr_urb);
+ }
+ return 0;
+}
/*
**
{
rtl8150_t *dev = netdev_priv(netdev);
warn("%s: Tx timeout.", netdev->name);
- dev->tx_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(dev->tx_urb);
dev->stats.tx_errors++;
}
if (netdev->flags & IFF_PROMISC) {
dev->rx_creg |= cpu_to_le16(0x0001);
info("%s: promiscuous mode", netdev->name);
- } else if ((netdev->mc_count > multicast_filter_limit) ||
+ } else if (netdev->mc_count ||
(netdev->flags & IFF_ALLMULTI)) {
dev->rx_creg &= cpu_to_le16(0xfffe);
dev->rx_creg |= cpu_to_le16(0x0002);
usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
skb->data, count, write_bulk_callback, dev);
if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
- warn("failed tx_urb %d\n", res);
- dev->stats.tx_errors++;
- netif_start_queue(netdev);
+ /* Can we get/handle EPIPE here? */
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else {
+ warn("failed tx_urb %d\n", res);
+ dev->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
} else {
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
- if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL)))
+ if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
warn("%s: rx_urb submit failed: %d", __FUNCTION__, res);
+ return res;
+ }
usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
dev->intr_buff, INTBUFSIZE, intr_callback,
dev, dev->intr_interval);
- if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL)))
+ if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
warn("%s: intr_urb submit failed: %d", __FUNCTION__, res);
- netif_start_queue(netdev);
+ usb_kill_urb(dev->rx_urb);
+ return res;
+ }
enable_net_traffic(dev);
set_carrier(netdev);
+ netif_start_queue(netdev);
return res;
}
}
fill_skb_pool(dev);
set_ethernet_addr(dev);
- info("%s: rtl8150 is detected", netdev->name);
usb_set_intfdata(intf, dev);
SET_NETDEV_DEV(netdev, &intf->dev);
err("couldn't register the device");
goto out2;
}
+
+ info("%s: rtl8150 is detected", netdev->name);
+
return 0;
out2:
usb_set_intfdata(intf, NULL);
if (dev) {
set_bit(RTL8150_UNPLUG, &dev->flags);
+ tasklet_disable(&dev->tl);
+ tasklet_kill(&dev->tl);
unregister_netdev(dev->netdev);
unlink_all_urbs(dev);
free_all_urbs(dev);
git://git.onelab.eu / linux-2.6.git / blobdiff