support" be compiled as a module for this driver to be used
properly.
+config USB_SERIAL_AIRCABLE
+ tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use USB AIRcable Bluetooth Dongle.
+
+ To compile this driver as a module, choose M here: the module
+ will be called aircable.
+
+config USB_SERIAL_AIRPRIME
+ tristate "USB AirPrime CDMA Wireless Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a AirPrime CDMA Wireless PC card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called airprime.
+
+config USB_SERIAL_ARK3116
+ tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a ARK Micro 3116 USB to Serial
+ device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ark3116
+
config USB_SERIAL_BELKIN
tristate "USB Belkin and Peracom Single Port Serial Driver"
depends on USB_SERIAL
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
- depends on USB_SERIAL && BROKEN_ON_SMP
+ depends on USB_SERIAL
help
Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
USB to serial converter device.
To compile this driver as a module, choose M here: the
module will be called digi_acceleport.
+config USB_SERIAL_CP2101
+ tristate "USB CP2101 UART Bridge Controller"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a CP2101/CP2102 based USB to RS232
+ converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cp2101.
+
config USB_SERIAL_CYPRESS_M8
tristate "USB Cypress M8 USB Serial Driver"
depends on USB_SERIAL && EXPERIMENTAL
To compile this driver as a module, choose M here: the
module will be called ftdi_sio.
+config USB_SERIAL_FUNSOFT
+ tristate "USB Fundamental Software Dongle Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use the Fundamental Software dongle.
+
+ To compile this driver as a module, choose M here: the
+ module will be called funsoft.
+
config USB_SERIAL_VISOR
tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
depends on USB_SERIAL
Magic Control Technology Corp. (U232 is one of the model numbers).
This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
- BAY devices.
+ BAY, Belkin F5U109, and Belkin F5U409 devices.
To compile this driver as a module, choose M here: the
module will be called mct_u232.
+config USB_SERIAL_MOS7720
+ tristate "USB Moschip 7720 Single Port Serial Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use a USB Serial single port adapter from
+ Moschip Semiconductor Tech.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mos7720.
+
+config USB_SERIAL_MOS7840
+ tristate "USB Moschip 7840/7820 USB Serial Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
+ Dual-Serial port device from MosChip Semiconductor.
+
+ The MCS7840 and MCS7820 have been developed to connect a wide range
+ of standard serial devices to a USB host. The MCS7840 has a USB
+ device controller connected to four (4) individual UARTs while the
+ MCS7820 controller connects to two (2) individual UARTs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mos7840. If unsure, choose N.
+
+config USB_SERIAL_NAVMAN
+ tristate "USB Navman GPS device"
+ depends on USB_SERIAL
+ help
+ To compile this driver as a module, choose M here: the
+ module will be called navman.
+
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
depends on USB_SERIAL
To compile this driver as a module, choose M here: the
module will be called pl2303.
+config USB_SERIAL_HP4X
+ tristate "USB HP4x Calculators support"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use an Hewlett-Packard 4x Calculator.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hp4x.
+
config USB_SERIAL_SAFE
tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
bool "USB Secure Encapsulated Driver - Padded"
depends on USB_SERIAL_SAFE
+config USB_SERIAL_SIERRAWIRELESS
+ tristate "USB Sierra Wireless Driver"
+ depends on USB_SERIAL
+ help
+ Say M here if you want to use a Sierra Wireless device (if
+ using an PC 5220 or AC580 please use the Airprime driver
+ instead).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sierra.
+
config USB_SERIAL_TI
tristate "USB TI 3410/5052 Serial Driver"
depends on USB_SERIAL
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
+config USB_SERIAL_OPTION
+ tristate "USB driver for GSM and CDMA modems"
+ depends on USB_SERIAL
+ help
+ Say Y here if you have a GSM or CDMA modem that's connected to USB.
+
+ This driver also supports several PCMCIA cards which have a
+ built-in OHCI-USB adapter and an internally-connected GSM modem.
+ The USB bus on these cards is not accessible externally.
+
+ Supported devices include (some of?) those made by:
+ Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
+
+ To compile this driver as a module, choose M here: the
+ module will be called option.
+
+ If this driver doesn't recognize your device,
+ it might be accessible via the FTDI_SIO driver.
+
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
To compile this driver as a module, choose M here: the
module will be called omninet.
+config USB_SERIAL_DEBUG
+ tristate "USB Debugging Device"
+ depends on USB_SERIAL
+ help
+ Say Y here if you have a USB debugging device used to recieve
+ debugging data from another machine. The most common of these
+ devices is the NetChip TurboCONNECT device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usb-debug.
+
config USB_EZUSB
bool
depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
default y
+
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff