*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
#include "kl5kusb105.h"
static int debug;
static int klsi_105_write (struct usb_serial_port *port,
const unsigned char *buf,
int count);
-static void klsi_105_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
+static void klsi_105_write_bulk_callback (struct urb *urb);
static int klsi_105_chars_in_buffer (struct usb_serial_port *port);
static int klsi_105_write_room (struct usb_serial_port *port);
-static void klsi_105_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
+static void klsi_105_read_bulk_callback (struct urb *urb);
static void klsi_105_set_termios (struct usb_serial_port *port,
- struct termios * old);
-static int klsi_105_ioctl (struct usb_serial_port *port,
- struct file * file,
- unsigned int cmd,
- unsigned long arg);
+ struct ktermios *old);
static void klsi_105_throttle (struct usb_serial_port *port);
static void klsi_105_unthrottle (struct usb_serial_port *port);
/*
MODULE_DEVICE_TABLE (usb, id_table);
static struct usb_driver kl5kusb105d_driver = {
- .owner = THIS_MODULE,
.name = "kl5kusb105d",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
+ .no_dynamic_id = 1,
};
-static struct usb_serial_device_type kl5kusb105d_device = {
- .owner = THIS_MODULE,
- .name = "KL5KUSB105D / PalmConnect",
- .short_name = "kl5kusb105d",
+static struct usb_serial_driver kl5kusb105d_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "kl5kusb105d",
+ },
+ .description = "KL5KUSB105D / PalmConnect",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.chars_in_buffer = klsi_105_chars_in_buffer,
.write_room = klsi_105_write_room,
.read_bulk_callback =klsi_105_read_bulk_callback,
- .ioctl = klsi_105_ioctl,
.set_termios = klsi_105_set_termios,
/*.break_ctl = klsi_105_break_ctl,*/
.tiocmget = klsi_105_tiocmget,
#define URB_TRANSFER_BUFFER_SIZE 64
struct klsi_105_private {
struct klsi_105_port_settings cfg;
- struct termios termios;
+ struct ktermios termios;
unsigned long line_state; /* modem line settings */
/* write pool */
struct urb * write_urb_pool[NUM_URBS];
return bytes_sent; /* that's how much we wrote */
} /* klsi_105_write */
-static void klsi_105_write_bulk_callback ( struct urb *urb, struct pt_regs *regs)
+static void klsi_105_write_bulk_callback ( struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
return;
}
- /* from generic_write_bulk_callback */
- schedule_work(&port->work);
+ usb_serial_port_softint(port);
} /* klsi_105_write_bulk_completion_callback */
-static void klsi_105_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
+static void klsi_105_read_bulk_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct klsi_105_private *priv = usb_get_serial_port_data(port);
usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
urb->actual_length, data);
} else {
- int i;
int bytes_sent = ((__u8 *) data)[0] +
((unsigned int) ((__u8 *) data)[1] << 8);
tty = port->tty;
bytes_sent = urb->actual_length - 2;
}
- for (i = 2; i < 2+bytes_sent; i++) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters,
- * we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless
- * tty->low_latency is set */
- tty_insert_flip_char(tty, ((__u8*) data)[i], 0);
- }
+ tty_buffer_request_room(tty, bytes_sent);
+ tty_insert_flip_string(tty, data + 2, bytes_sent);
tty_flip_buffer_push(tty);
/* again lockless, but debug info only */
static void klsi_105_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
unsigned int iflag = port->tty->termios->c_iflag;
*/
return retval;
}
-
-static int klsi_105_ioctl (struct usb_serial_port *port, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct klsi_105_private *priv = usb_get_serial_port_data(port);
- void __user *user_arg = (void __user *)arg;
-
- dbg("%scmd=0x%x", __FUNCTION__, cmd);
-
- /* Based on code from acm.c and others */
- switch (cmd) {
- case TIOCMIWAIT:
- /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
- /* TODO */
- dbg("%s - TIOCMIWAIT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TIOCGICOUNT:
- /* return count of modemline transitions */
- /* TODO */
- dbg("%s - TIOCGICOUNT not handled", __FUNCTION__);
- return -ENOIOCTLCMD;
- case TCGETS:
- /* return current info to caller */
- dbg("%s - TCGETS data faked/incomplete", __FUNCTION__);
-
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (kernel_termios_to_user_termios((struct termios __user *)arg,
- &priv->termios))
- return -EFAULT;
- return 0;
- case TCSETS:
- /* set port termios to the one given by the user */
- dbg("%s - TCSETS not handled", __FUNCTION__);
-
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios)))
- return -EFAULT;
-
- if (user_termios_to_kernel_termios(&priv->termios,
- (struct termios __user *)arg))
- return -EFAULT;
- klsi_105_set_termios(port, &priv->termios);
- return 0;
- case TCSETSW: {
- /* set port termios and try to wait for completion of last
- * write operation */
- /* We guess here. If there are not too many write urbs
- * outstanding, we lie. */
- /* what is the right way to wait here? schedule() ? */
- /*
- while (klsi_105_chars_in_buffer(port) > (NUM_URBS / 4 ) * URB_TRANSFER_BUFFER_SIZE)
- schedule();
- */
- return -ENOIOCTLCMD;
- }
- default:
- dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd);
- return(-ENOIOCTLCMD);
- break;
- }
- return 0;
-} /* klsi_105_ioctl */
static void klsi_105_throttle (struct usb_serial_port *port)
{