*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * (06/03/2003) Judd Montgomery <judd at jpilot.org>
- * Added support for module parameter options for untested/unknown
- * devices.
- *
- * (03/09/2003) gkh
- * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
- * <brachtl@redgrep.cz> for the information.
- *
- * (03/05/2003) gkh
- * Think Treo support is now working.
- *
- * (04/03/2002) gkh
- * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
- * <hiro@zob.ne.jp> for the information.
- *
- * (03/27/2002) gkh
- * Removed assumptions that port->tty was always valid (is not true
- * for usb serial console devices.)
- *
- * (03/23/2002) gkh
- * Added support for the Palm i705 device, thanks to Thomas Riemer
- * <tom@netmech.com> for the information.
- *
- * (03/21/2002) gkh
- * Added support for the Palm m130 device, thanks to Udo Eisenbarth
- * <udo.eisenbarth@web.de> for the information.
- *
- * (02/27/2002) gkh
- * Reworked the urb handling logic. We have no more pool, but dynamically
- * allocate the urb and the transfer buffer on the fly. In testing this
- * does not incure any measurable overhead. This also relies on the fact
- * that we have proper reference counting logic for urbs.
- *
- * (02/21/2002) SilaS
- * Added initial support for the Palm m515 devices.
- *
- * (02/14/2002) gkh
- * Added support for the Clie S-360 device.
- *
- * (12/18/2001) gkh
- * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
- * for the patch.
- *
- * (11/11/2001) gkh
- * Added support for the m125 devices, and added check to prevent oopses
- * for Clié devices that lie about the number of ports they have.
- *
- * (08/30/2001) gkh
- * Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- * Many thanks to Daniel Burke, and Bryan Payne for helping with this.
- *
- * (08/23/2001) gkh
- * fixed a few potential bugs pointed out by Oliver Neukum.
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (05/28/2000) gkh
- * Added initial support for the Palm m500 and Palm m505 devices.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * (01/21/2000) gkh
- * Added write_room and chars_in_buffer, as they were previously using the
- * generic driver versions which is all wrong now that we are using an urb
- * pool. Thanks to Wolfgang Grandegger for pointing this out to me.
- * Removed count assignment in the write function, which was not needed anymore
- * either. Thanks to Al Borchers for pointing this out.
- *
- * (12/12/2000) gkh
- * Moved MOD_DEC to end of visor_close to be nicer, as the final write
- * message can sleep.
- *
- * (11/12/2000) gkh
- * Fixed bug with data being dropped on the floor by forcing tty->low_latency
- * to be on. Hopefully this fixes the OHCI issue!
- *
- * (11/01/2000) Adam J. Richter
- * usb_device_id table support
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (09/11/2000) gkh
- * Got rid of always calling kmalloc for every urb we wrote out to the
- * device.
- * Added visor_read_callback so we can keep track of bytes in and out for
- * those people who like to know the speed of their device.
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (09/06/2000) gkh
- * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
- * the host controller drivers set urb->dev = NULL when the urb is finished.
- *
- * (08/28/2000) gkh
- * Added locks for SMP safeness.
- *
- * (08/08/2000) gkh
- * Fixed endian problem in visor_startup.
- * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- * than once.
- *
- * (07/23/2000) gkh
- * Added pool of write urbs to speed up transfers to the visor.
- *
- * (07/19/2000) gkh
- * Added module_init and module_exit functions to handle the fact that this
- * driver is a loadable module now.
- *
- * (07/03/2000) gkh
- * Added visor_set_ioctl and visor_set_termios functions (they don't do much
- * of anything, but are good for debugging.)
- *
- * (06/25/2000) gkh
- * Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- * bug that people have been reporting.
- *
- * (06/23/2000) gkh
- * Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (04/27/2000) Ryan VanderBijl
- * Fixed memory leak in visor_close
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
*/
#include <linux/config.h>
/*
* Version Information
*/
-#define DRIVER_VERSION "v2.1"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
/* function prototypes for a handspring visor */
static int visor_open (struct usb_serial_port *port, struct file *filp);
static void visor_close (struct usb_serial_port *port, struct file *filp);
-static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
+static int visor_write (struct usb_serial_port *port, const unsigned char *buf, int count);
static int visor_write_room (struct usb_serial_port *port);
static int visor_chars_in_buffer (struct usb_serial_port *port);
static void visor_throttle (struct usb_serial_port *port);
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ }, /* optional parameter entry */
{ } /* Terminating entry */
};
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
+ { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) },
+ { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID) },
{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) },
{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) },
+ { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) },
{ }, /* optional parameter entry */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
static struct usb_driver visor_driver = {
- .owner = THIS_MODULE,
.name = "visor",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table_combined,
+ .no_dynamic_id = 1,
};
/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
-static struct usb_serial_device_type handspring_device = {
- .owner = THIS_MODULE,
- .name = "Handspring Visor / Palm OS",
- .short_name = "visor",
+static struct usb_serial_driver handspring_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "visor",
+ },
+ .description = "Handspring Visor / Palm OS",
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
};
/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
-static struct usb_serial_device_type clie_5_device = {
- .owner = THIS_MODULE,
- .name = "Sony Clie 5.0",
- .short_name = "clie_5",
+static struct usb_serial_driver clie_5_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "clie_5",
+ },
+ .description = "Sony Clie 5.0",
.id_table = clie_id_5_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
};
/* device info for the Sony Clie OS version 3.5 */
-static struct usb_serial_device_type clie_3_5_device = {
- .owner = THIS_MODULE,
- .name = "Sony Clie 3.5",
- .short_name = "clie_3.5",
+static struct usb_serial_driver clie_3_5_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "clie_3.5",
+ },
+ .description = "Sony Clie 3.5",
.id_table = clie_id_3_5_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
int bytes_in;
int bytes_out;
int outstanding_urbs;
+ int throttled;
};
/* number of outstanding urbs to prevent userspace DoS from happening */
priv->bytes_in = 0;
priv->bytes_out = 0;
priv->outstanding_urbs = 0;
+ priv->throttled = 0;
spin_unlock_irqrestore(&priv->lock, flags);
/*
dbg("%s - port %d", __FUNCTION__, port->number);
/* shutdown our urbs */
- usb_unlink_urb (port->read_urb);
+ usb_kill_urb(port->read_urb);
if (port->interrupt_in_urb)
- usb_unlink_urb (port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_in_urb);
/* Try to send shutdown message, if the device is gone, this will just fail. */
transfer_buffer = kmalloc (0x12, GFP_KERNEL);
}
-static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
+static int visor_write (struct usb_serial_port *port, const unsigned char *buf, int count)
{
struct visor_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->lock, flags);
- dev_dbg(&port->dev, "write limit hit\n");
+ dbg("%s - write limit hit\n", __FUNCTION__);
return 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
return -ENOMEM;
}
- if (from_user) {
- if (copy_from_user (buffer, buf, count)) {
- kfree (buffer);
- usb_free_urb (urb);
- return -EFAULT;
- }
- } else {
- memcpy (buffer, buf, count);
- }
+ memcpy (buffer, buf, count);
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
unsigned char *data = urb->transfer_buffer;
struct tty_struct *tty;
unsigned long flags;
- int i;
+ int throttled;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
if (tty && urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless tty->low_latency is set */
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
spin_lock_irqsave(&priv->lock, flags);
priv->bytes_in += urb->actual_length;
+ throttled = priv->throttled;
spin_unlock_irqrestore(&priv->lock, flags);
- /* Continue trying to always read */
- usb_fill_bulk_urb (port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- visor_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ /* Continue trying to always read if we should */
+ if (!throttled) {
+ usb_fill_bulk_urb (port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ visor_read_bulk_callback, port);
+ result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ }
return;
}
static void visor_throttle (struct usb_serial_port *port)
{
+ struct visor_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
dbg("%s - port %d", __FUNCTION__, port->number);
- usb_unlink_urb (port->read_urb);
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->throttled = 1;
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static void visor_unthrottle (struct usb_serial_port *port)
{
+ struct visor_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->throttled = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (retval == sizeof(*connection_info)) {
connection_info = (struct visor_connection_info *)transfer_buffer;
- le16_to_cpus(&connection_info->num_ports);
- num_ports = connection_info->num_ports;
-
+ num_ports = le16_to_cpu(connection_info->num_ports);
for (i = 0; i < num_ports; ++i) {
switch (connection_info->connections[i].port_function_id) {
case VISOR_FUNCTION_GENERIC:
break;
}
dev_info(dev, "%s: port %d, is for %s use\n",
- serial->type->name,
+ serial->type->description,
connection_info->connections[i].port, string);
}
}
*/
if (num_ports == 0 || num_ports > 2) {
dev_warn (dev, "%s: No valid connect info available\n",
- serial->type->name);
+ serial->type->description);
num_ports = 2;
}
- dev_info(dev, "%s: Number of ports: %d\n", serial->type->name,
+ dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
num_ports);
/*
int i;
for (i = 0; i < serial->num_ports; ++i) {
- priv = kmalloc (sizeof(*priv), GFP_KERNEL);
+ priv = kzalloc (sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- memset (priv, 0x00, sizeof(*priv));
spin_lock_init(&priv->lock);
usb_set_serial_port_data(serial->port[i], priv);
}
/* get the config number */
result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0),
USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
- 0, 0, &data, 1, HZ * 3);
+ 0, 0, &data, 1, 3000);
if (result < 0) {
dev_err(dev, "%s: get config number failed: %d\n", __FUNCTION__, result);
return result;
result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0),
USB_REQ_GET_INTERFACE,
USB_DIR_IN | USB_RECIP_INTERFACE,
- 0, 0, &data, 1, HZ * 3);
+ 0, 0, &data, 1, 3000);
if (result < 0) {
dev_err(dev, "%s: get interface number failed: %d\n", __FUNCTION__, result);
return result;
/* Only do this endpoint hack for the Handspring devices with
* interrupt in endpoints, which for now are the Treo devices. */
- if (!((serial->dev->descriptor.idVendor == HANDSPRING_VENDOR_ID) ||
- (serial->dev->descriptor.idVendor == KYOCERA_VENDOR_ID)) ||
+ if (!((le16_to_cpu(serial->dev->descriptor.idVendor) == HANDSPRING_VENDOR_ID) ||
+ (le16_to_cpu(serial->dev->descriptor.idVendor) == KYOCERA_VENDOR_ID)) ||
(serial->num_interrupt_in == 0))
goto generic_startup;
retval = usb_register(&visor_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return 0;
failed_usb_register:
git://git.onelab.eu / linux-2.6.git / blobdiff