fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / usb / storage / Kconfig

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index f1f1c06..fe2c4cd 100644 (file)
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,13 +2,13 @@
 # USB Storage driver configuration
 #
 
-comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
+comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
+comment "may also be needed; see USB_STORAGE Help for more information"
        depends on USB
 
 config USB_STORAGE
        tristate "USB Mass Storage support"
-       depends on USB
-       select SCSI
+       depends on USB && SCSI
        ---help---
          Say Y here if you want to connect USB mass storage devices to your
          computer's USB port. This is the driver you need for USB
@@ -17,7 +17,7 @@ config USB_STORAGE
          similar devices. This driver may also be used for some cameras
          and card readers.
 
-         This option 'selects' (turns on, enables) 'SCSI', but you
+         This option depends on 'SCSI' support being enabled, but you
          probably also need 'SCSI device support: SCSI disk support'
          (BLK_DEV_SD) for most USB storage devices.
 
@@ -47,7 +47,8 @@ config USB_STORAGE_FREECOM
 
 config USB_STORAGE_ISD200
        bool "ISD-200 USB/ATA Bridge support"
-       depends on USB_STORAGE && BLK_DEV_IDE
+       depends on USB_STORAGE
+       depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
        ---help---
          Say Y here if you want to use USB Mass Store devices based
          on the In-Systems Design ISD-200 USB/ATA bridge.
@@ -111,3 +112,50 @@ config USB_STORAGE_JUMPSHOT
          Say Y here to include additional code to support the Lexar Jumpshot
          USB CompactFlash reader.
 
+config USB_STORAGE_ALAUDA
+       bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)"
+       depends on USB_STORAGE && EXPERIMENTAL
+       help
+         Say Y here to include additional code to support the Olympus MAUSB-10
+         and Fujifilm DPC-R1 USB Card reader/writer devices.
+
+         These devices are based on the Alauda chip and support both
+         XD and SmartMedia cards.
+
+config USB_STORAGE_ONETOUCH
+       bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
+       depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM
+       help
+         Say Y here to include additional code to support the Maxtor OneTouch
+         USB hard drive's onetouch button.
+
+         This code registers the button on the front of Maxtor OneTouch USB
+         hard drive's as an input device. An action can be associated with
+         this input in any keybinding software. (e.g. gnome's keyboard short-
+         cuts)
+
+config USB_STORAGE_KARMA
+       bool "Support for Rio Karma music player"
+       depends on USB_STORAGE
+       help
+         Say Y here to include additional code to support the Rio Karma
+         USB interface.
+
+         This code places the Rio Karma into mass storage mode, enabling
+         it to be mounted as an ordinary filesystem. Performing an eject
+         on the resulting scsi device node returns the Karma to normal
+         operation.
+
+config USB_LIBUSUAL
+       bool "The shared table of common (or usual) storage devices"
+       depends on USB
+       help
+         This module contains a table of common (or usual) devices
+         for usb-storage and ub drivers, and allows to switch binding
+         of these devices without rebuilding modules.
+
+         Typical syntax of /etc/modprobe.conf is:
+
+               options libusual bias="ub"
+
+         If unsure, say N.