* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include "scsiglue.h"
-#include "usb.h"
-#include "debug.h"
-#include "transport.h"
#include <linux/slab.h>
#include <linux/module.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_devinfo.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include "scsiglue.h"
+#include "usb.h"
+#include "debug.h"
+#include "transport.h"
+#include "protocol.h"
/***********************************************************************
* Host functions
{
/*
* Set default bflags. These can be overridden for individual
- * models and vendors via the scsi devinfo mechanism.
+ * models and vendors via the scsi devinfo mechanism. The only
+ * flag we need is to force 36-byte INQUIRYs; we don't use any
+ * of the extra data and many devices choke if asked for more or
+ * less than 36 bytes.
*/
- sdev->sdev_bflags = (BLIST_MS_SKIP_PAGE_08 | BLIST_MS_SKIP_PAGE_3F |
- BLIST_USE_10_BYTE_MS);
+ sdev->sdev_bflags = BLIST_INQUIRY_36;
+
return 0;
}
* the end, scatter-gather buffers follow page boundaries. */
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
- /* Devices using Genesys Logic chips cause a lot of trouble for
- * high-speed transfers; they die unpredictably when given more
- * than 64 KB of data at a time. If we detect such a device,
- * reduce the maximum transfer size to 64 KB = 128 sectors. */
-
-#define USB_VENDOR_ID_GENESYS 0x05e3 // Needs a standard location
+ /* According to the technical support people at Genesys Logic,
+ * devices using their chips have problems transferring more than
+ * 32 KB at a time. In practice people have found that 64 KB
+ * works okay and that's what Windows does. But we'll be
+ * conservative; people can always use the sysfs interface to
+ * increase max_sectors. */
if (us->pusb_dev->descriptor.idVendor == USB_VENDOR_ID_GENESYS &&
- us->pusb_dev->speed == USB_SPEED_HIGH)
- blk_queue_max_sectors(sdev->request_queue, 128);
+ sdev->request_queue->max_sectors > 64)
+ blk_queue_max_sectors(sdev->request_queue, 64);
+
+ /* We can't put these settings in slave_alloc() because that gets
+ * called before the device type is known. Consequently these
+ * settings can't be overridden via the scsi devinfo mechanism. */
+ if (sdev->type == TYPE_DISK) {
+
+ /* Disk-type devices use MODE SENSE(6) if the protocol
+ * (SubClass) is Transparent SCSI, otherwise they use
+ * MODE SENSE(10). */
+ if (us->subclass != US_SC_SCSI)
+ sdev->use_10_for_ms = 1;
+
+ /* Many disks only accept MODE SENSE transfer lengths of
+ * 192 bytes (that's what Windows uses). */
+ sdev->use_192_bytes_for_3f = 1;
+
+ /* A number of devices have problems with MODE SENSE for
+ * page x08, so we will skip it. */
+ sdev->skip_ms_page_8 = 1;
+
+#ifndef CONFIG_USB_STORAGE_RW_DETECT
+ /* Some devices may not like MODE SENSE with page=0x3f.
+ * Now that we're using 192-byte transfers this may no
+ * longer be a problem. So this will be a configuration
+ * option. */
+ sdev->skip_ms_page_3f = 1;
+#endif
+
+ } else {
+
+ /* Non-disk-type devices don't need to blacklist any pages
+ * or to force 192-byte transfer lengths for MODE SENSE.
+ * But they do need to use MODE SENSE(10). */
+ sdev->use_10_for_ms = 1;
+ }
- /* this is to satisify the compiler, tho I don't think the
+ /* this is to satisfy the compiler, tho I don't think the
* return code is ever checked anywhere. */
return 0;
}
/* queue a command */
/* This is always called with scsi_lock(srb->host) held */
-static int queuecommand( Scsi_Cmnd *srb , void (*done)(Scsi_Cmnd *))
+static int queuecommand(struct scsi_cmnd *srb,
+ void (*done)(struct scsi_cmnd *))
{
struct us_data *us = (struct us_data *)srb->device->host->hostdata[0];
/* Command abort */
/* This is always called with scsi_lock(srb->host) held */
-static int command_abort( Scsi_Cmnd *srb )
+static int command_abort(struct scsi_cmnd *srb )
{
struct Scsi_Host *host = srb->device->host;
struct us_data *us = (struct us_data *) host->hostdata[0];
/* This invokes the transport reset mechanism to reset the state of the
* device */
/* This is always called with scsi_lock(srb->host) held */
-static int device_reset( Scsi_Cmnd *srb )
+static int device_reset(struct scsi_cmnd *srb)
{
struct us_data *us = (struct us_data *)srb->device->host->hostdata[0];
int result;
/* It refuses to work if there's more than one interface in
* the device, so that other users are not affected. */
/* This is always called with scsi_lock(srb->host) held */
-static int bus_reset( Scsi_Cmnd *srb )
+static int bus_reset(struct scsi_cmnd *srb)
{
struct us_data *us = (struct us_data *)srb->device->host->hostdata[0];
int result;
* periodically someone should test to see which setting is more
* optimal.
*/
- .use_clustering = TRUE,
+ .use_clustering = 1,
/* emulated HBA */
- .emulated = TRUE,
+ .emulated = 1,
+
+ /* we do our own delay after a device or bus reset */
+ .skip_settle_delay = 1,
/* sysfs device attributes */
.sdev_attrs = sysfs_device_attr_list,
git://git.onelab.eu / linux-2.6.git / blobdiff