/* If you edit this file, please try to keep it sorted first by VendorID,
* then by ProductID.
*
- * If you want to add an entry for this file, be sure to include the
- * following information:
- * - a patch that adds the entry for your device, including your
- * email address right above the entry (plus maybe a brief
- * explanation of the reason for the entry),
+ * If you want to add an entry for this file, please send the following
+ * to greg@kroah.com:
+ * - patch that adds the entry for your device which includes your
+ * email address right above the entry.
* - a copy of /proc/bus/usb/devices with your device plugged in
* running with this patch.
- * Send your submission to either Phil Dibowitz <phil@ipom.com> or
- * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
- * USB development list <linux-usb-devel@lists.sourceforge.net>.
+ *
*/
UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0100,
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif
+/* Patch submitted by Alessandro Fracchetti <al.fracchetti@tin.it> */
+UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam L3",
+ US_SC_SCSI, US_PR_BULK, NULL, US_FL_FIX_INQUIRY),
+
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
/* Patch for Kyocera Finecam L3
* Submitted by Michael Krauth <michael.krauth@web.de>
- * and Alessandro Fracchetti <al.fracchetti@tin.it>
*/
UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100,
"Kyocera",
"785EPX Storage",
US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
-/* Not sure who reported this originally but
- * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
- * flag be added */
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
"Fujifilm",
"FinePix 1400Zoom",
- US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
+ US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
* The device needs the flags only.
"CD-R/RW Drive",
US_SC_8070, US_PR_CB, NULL, 0),
-/* Reported by Adriaan Penning <a.penning@luon.net>
- * Note that these cameras report "Medium not present" after
- * ALLOW_MEDIUM_REMOVAL, so they also need to be marked
- * NOT_LOCKABLE in the SCSI blacklist (and the vendor is MATSHITA). */
-UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
- "Panasonic",
- "DMC-LCx Camera",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Most of the following entries were developed with the help of
* Shuttle/SCM directly.
*/
US_SC_8070, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY ),
-/* Yakumo Mega Image 37
- * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
-UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
- "Tekom Technologies, Inc",
- "300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
-/* Another Yakumo camera.
- * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
-UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
- "Tekom Technologies, Inc",
- "300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
-/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
-UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
- "Tekom Technologies, Inc",
- "300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
-/* Yakumo Mega Image 47
- * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
-UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
- "Tekom Technologies, Inc",
- "400_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
-/* Reported by Paul Ortyl <ortylp@3miasto.net>
- * Note that it's similar to the device above, only different prodID */
-UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
- "Tekom Technologies, Inc",
- "400_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
/* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
"Sony",
"Digital Camera EX-20 DSC",
US_SC_8070, US_PR_DEVICE, NULL, 0 ),
-/* The entry was here before I took over, and had US_SC_RBC. It turns
- * out that isn't needed. Additionally, Torsten Eriksson
- * <Torsten.Eriksson@bergianska.se> is able to use his device fine
- * without this entry at all - but I don't suspect that will be true
- * for all users (the protocol is likely needed), so is staying at
- * this time. - Phil Dibowitz <phil@ipom.com>
- */
UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
"LaCie",
"USB Hard Disk",
- US_SC_DEVICE, US_PR_CB, NULL, 0 ),
+ US_SC_RBC, US_PR_CB, NULL, 0 ),
/* Submitted by Joel Bourquard <numlock@freesurf.ch>
* Some versions of this device need the SubClass and Protocol overrides
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Reported by Carlos Villegas <cav@uniscope.co.jp>
+ * This device needs an INQUIRY of exactly 36-bytes to function.
+ * That is the only reason this entry is needed.
+ */
+UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0xffff,
+ "Genesys Logic",
+ "USB to IDE Card Reader",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted Alexander Oltu <alexander@all-2.com> */
+UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
+ "Genesys Logic",
+ "USB to IDE Optical",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MODE_XLATE ),
+
+/* Reported by Peter Marks <peter.marks@turner.com>
+ * Like the SIIG unit above, this unit needs an INQUIRY to ask for exactly
+ * 36 bytes of data. No more, no less. That is the only reason this entry
+ * is needed.
+ *
+ * ST818 slim drives (rev 0.02) don't need special care.
+*/
+UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
+ "Genesys Logic",
+ "USB to IDE Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
/* Reported by Hanno Boeck <hanno@gmx.de>
* Taken from the Lycoris Kernel */
UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
#endif
-/* Reported by Eero Volotinen <eero@ping-viini.org> */
-UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406,
- "Freecom Technologies",
- "FHD-Classic",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
"Microtech",
"USB-SCSI-DB25",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MODE_XLATE ),
+UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100,
+ "IBM",
+ "IBM USB Memory Key",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-/* Patch by Stephan Walter <stephan.walter@epfl.ch>
- * I don't know why, but it works... */
-UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
- "WINWARD",
- "Music Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
"USB",
"Solid state disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-
-/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
-UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
- "USB",
- "Flash Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
+
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MODE_XLATE ),
-/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
-UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
- "SWISSBIT",
- "Black Silver",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
#ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
"Sandisk",
git://git.onelab.eu / linux-2.6.git / blobdiff